Firmware blob looks like this...
u8 firmware_major
u8 firmware_minor
u8 firmware_fix
u8 pad
__be32 start_address
__be32 length (total, including BSS sections to be zeroed)
data... (in __be32 words, which is native for the firmware)
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We store the firmware in its native big-endian form now, so the loop in
ace_copy() is modified to use be32_to_cpup() when writing it out.
We can forget the BSS,SBSS sections of the firmware, since we were
clearing all the device's RAM anyway. And the text,rodata,data sections
can all be loaded as a single chunk since they're contiguous (give or
take a few dozen bytes in between).
Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thanks to excellent diagnosis by Eduard Guzovsky.
The core problem is that on a network with lots of active
multicast traffic, the neighbour cache can fill up. If
we try to allocate a new route and thus neighbour cache
entry, the bog-standard GC attempt the neighbour layer does
in ineffective because route entries hold a reference
to the existing neighbour entries and GC can only liberate
entries with no references.
IPV4 already has a way to handle this, by doing a route cache
GC in such situations (when neigh attach returns -ENOBUFS).
So simply mimick this on the ipv6 side.
Tested-by: Eduard Guzovsky <eguzovsky@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we converted the protocol atomic counters such as the orphan
count and the total socket count deadlocks were introduced due to
the mismatch in BH status of the spots that used the percpu counter
operations.
Based on the diagnosis and patch by Peter Zijlstra, this patch
fixes these issues by disabling BH where we may be in process
context.
Reported-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
In future all cpumask ops will only be valid (in general) for bit
numbers < nr_cpu_ids. So use that instead of NR_CPUS in iterators
and other comparisons.
This is always safe: no cpu number can be >= nr_cpu_ids, and
nr_cpu_ids is initialized to NR_CPUS at boot.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
This set of patches introduces calls to the following set of functions:
usb_endpoint_dir_in(epd)
usb_endpoint_dir_out(epd)
usb_endpoint_is_bulk_in(epd)
usb_endpoint_is_bulk_out(epd)
usb_endpoint_is_int_in(epd)
usb_endpoint_is_int_out(epd)
usb_endpoint_num(epd)
usb_endpoint_type(epd)
usb_endpoint_xfer_bulk(epd)
usb_endpoint_xfer_control(epd)
usb_endpoint_xfer_int(epd)
usb_endpoint_xfer_isoc(epd)
In some cases, introducing one of these functions is not possible, and it
just replaces an explicit integer value by one of the following constants:
USB_ENDPOINT_XFER_BULK
USB_ENDPOINT_XFER_CONTROL
USB_ENDPOINT_XFER_INT
USB_ENDPOINT_XFER_ISOC
In drivers/net/wireless/zd1211rw/zd_usb.c the code:
(endpoint->bEndpointAddress & USB_TYPE_MASK) == USB_DIR_OUT
is suspicious. If it is intended to use USB_ENDPOINT_DIR_MASK rather than
USB_TYPE_MASK, then the whole conditional test could be converted to a call
to usb_endpoint_is_bulk_in.
An extract of the semantic patch that makes these changes is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@r1@ struct usb_endpoint_descriptor *epd; @@
- ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) ==
- \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ usb_endpoint_xfer_control(epd)
@r5@ struct usb_endpoint_descriptor *epd; @@
- ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) ==
- \(USB_DIR_IN\|0x80\))
+ usb_endpoint_dir_in(epd)
@inc@
@@
#include <linux/usb.h>
@depends on !inc && (r1||r5)@
@@
+ #include <linux/usb.h>
#include <linux/usb/...>
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
cls_cgroup can't be compiled as a module, since it's not supported by
cgroup.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- It's better to use container_of() instead of casting cgroup_subsys_state *
to cgroup_cls_state *.
- Add helper function task_cls_state().
- Rename net_cls_state() to cgrp_cls_state().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When removing a cgroup, an oops was triggered immediately. The cause
is wrong kfree() in cgrp_destroy().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
in drivers/net/eexpress.c:558, function unstick_cu()
while (!SCB_complete(rsst=scb_status(dev))) {
...
if (...)
printk(KERN_WARNING "%s: Reset timed out status %04x, retrying...\n",
dev->name,rsst);
}
but this will become
while (!((rsst = scb_status(dev) & 0x8000) != 0) ...
because of the macro:
#define SCB_complete(s) ((s&0x8000)!=0)
so rsst can only become either 0x8000 or 0, but in the latter case the
loop ends, I think the wrong timed out status is printed. This also
cleans up similar macros.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now using Ethtool to determine ring sizes, removed the module parameters
that controlled those values.
Modifying ring size requires restart of the interface.
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
Removed module parameter specifying number of RX rings
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
Required in cases were dev->caps.num_comp_vectors > MAX_RX_RINGS.
For current values this would happen on machines that have more
then 16 cores.
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
Removed duplicated include in drivers/net/arm/ks8695net.c.
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During network namespace teardown we either move or delete
all of the network devices associated with a network namespace.
In the case of veth devices deleting one will also delete it's
pair device. If both devices are in the same network namespace
then for_each_netdev_safe is insufficient as next may point
to the second veth device we have deleted.
To avoid problems I do what we do in __rtnl_kill_links and
restart the scan of the device list, after we have deleted
a device.
Currently dev_change_netnamespace does not appear to suffer from
this problem, but wireless devices are also paired and likely
should be moved between network namespaces together. So I have
errored on the side of caution and restart the scan of the network
devices in that case as well.
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I hit similar build failure due to the change in the netif_rx_reschedule()
drivers/net/ehea/ehea_main.c: In function 'ehea_poll':
drivers/net/ehea/ehea_main.c:844: warning: passing argument 1 of 'netif_rx_reschedule' from incompatible pointer type
drivers/net/ehea/ehea_main.c:844: error: too many arguments to function 'netif_rx_reschedule'
make[3]: *** [drivers/net/ehea/ehea_main.o] Error 1
greping through the sources for the changes missed out, we have
./drivers/net/arm/ixp4xx_eth.c:507: netif_rx_reschedule(dev, napi)) {
./drivers/net/arm/ep93xx_eth.c:310: if (more && netif_rx_reschedule(dev, napi))
./drivers/net/wan/ixp4xx_hss.c:657: netif_rx_reschedule(dev, napi)) {
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As reported by Stephen Rothwell:
--------------------
Today's linux-next build (powerpc ppc64_defconfig) produced these new
warnings:
drivers/net/pasemi_mac.c: In function 'pasemi_mac_rx_intr':
drivers/net/pasemi_mac.c:957: warning: unused variable 'dev'
drivers/net/pasemi_mac.c: In function 'pasemi_mac_poll':
drivers/net/pasemi_mac.c:1637: warning: unused variable 'dev'
drivers/net/spider_net.c: In function 'spider_net_poll':
drivers/net/spider_net.c:1280: warning: unused variable 'netdev'
Probably caused by commit 908a7a16b8 ("net:
Remove unused netdev arg from some NAPI interfaces").
--------------------
Signed-off-by: David S. Miller <davem@davemloft.net>
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (144 commits)
powerpc/44x: Support 16K/64K base page sizes on 44x
powerpc: Force memory size to be a multiple of PAGE_SIZE
powerpc/32: Wire up the trampoline code for kdump
powerpc/32: Add the ability for a classic ppc kernel to be loaded at 32M
powerpc/32: Allow __ioremap on RAM addresses for kdump kernel
powerpc/32: Setup OF properties for kdump
powerpc/32/kdump: Implement crash_setup_regs() using ppc_save_regs()
powerpc: Prepare xmon_save_regs for use with kdump
powerpc: Remove default kexec/crash_kernel ops assignments
powerpc: Make default kexec/crash_kernel ops implicit
powerpc: Setup OF properties for ppc32 kexec
powerpc/pseries: Fix cpu hotplug
powerpc: Fix KVM build on ppc440
powerpc/cell: add QPACE as a separate Cell platform
powerpc/cell: fix build breakage with CONFIG_SPUFS disabled
powerpc/mpc5200: fix error paths in PSC UART probe function
powerpc/mpc5200: add rts/cts handling in PSC UART driver
powerpc/mpc5200: Make PSC UART driver update serial errors counters
powerpc/mpc5200: Remove obsolete code from mpc5200 MDIO driver
powerpc/mpc5200: Add MDMA/UDMA support to MPC5200 ATA driver
...
Fix trivial conflict in drivers/char/Makefile as per Paul's directions
Commit 908a7a16b8 ("net: Remove unused
netdev arg from some NAPI interfaces") missed two spots.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
smackfs: check for allocation failures in smk_set_access()
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (25 commits)
allow stripping of generated symbols under CONFIG_KALLSYMS_ALL
kbuild: strip generated symbols from *.ko
kbuild: simplify use of genksyms
kernel-doc: check for extra kernel-doc notations
kbuild: add headerdep used to detect inclusion cycles in header files
kbuild: fix string equality testing in tags.sh
kbuild: fix make tags/cscope
kbuild: fix make incompatibility
kbuild: remove TAR_IGNORE
setlocalversion: add git-svn support
setlocalversion: print correct subversion revision
scripts: improve the decodecode script
scripts/package: allow custom options to rpm
genksyms: allow to ignore symbol checksum changes
genksyms: track symbol checksum changes
tags and cscope support really belongs in a shell script
kconfig: fix options to check-lxdialog.sh
kbuild: gen_init_cpio expands shell variables in file names
remove bashisms from scripts/extract-ikconfig
kbuild: teach mkmakfile to be silent
...
This adds support for 16k and 64k page sizes on PowerPC 44x processors.
The PGDIR table is much smaller than a page when using 16k or 64k
pages (512 and 32 bytes respectively) so we allocate the PGDIR with
kzalloc() instead of __get_free_pages().
One PTE table covers rather a large memory area when using 16k or 64k
pages (32MB or 512MB respectively), so we can easily put FIXMAP and
PKMAP in the area covered by one PTE table.
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Vladimir Panfilov <pvr@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Ensure that total memory size is page-aligned, because otherwise
mark_bootmem() gets upset.
This error case was triggered by using 64 KiB pages in the kernel
while arch/powerpc/boot/4xx.c arbitrarily reduced the amount of memory
by 4096 (to work around a chip bug that affects the last 256 bytes of
physical memory).
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: use the new byteorder headers
fbcon: Protect free_irq() by MACH_IS_ATARI check
fbcon: remove broken mac vbl handler
m68k: fix trigraph ignored warning in setox.S
macfb annotations and compiler warning fix
m68k: mac baboon interrupt enable/disable
m68k: machw.h cleanup
m68k: Mac via cleanup and commentry
m68k: Reinstate mac rtc
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits)
net: Allow dependancies of FDDI & Tokenring to be modular.
igb: Fix build warning when DCA is disabled.
net: Fix warning fallout from recent NAPI interface changes.
gro: Fix potential use after free
sfc: If AN is enabled, always read speed/duplex from the AN advertising bits
sfc: When disabling the NIC, close the device rather than unregistering it
sfc: SFT9001: Add cable diagnostics
sfc: Add support for multiple PHY self-tests
sfc: Merge top-level functions for self-tests
sfc: Clean up PHY mode management in loopback self-test
sfc: Fix unreliable link detection in some loopback modes
sfc: Generate unique names for per-NIC workqueues
802.3ad: use standard ethhdr instead of ad_header
802.3ad: generalize out mac address initializer
802.3ad: initialize ports LACPDU from const initializer
802.3ad: remove typedef around ad_system
802.3ad: turn ports is_individual into a bool
802.3ad: turn ports is_enabled into a bool
802.3ad: make ntt bool
ixgbe: Fix set_ringparam in ixgbe to use the same memory pools.
...
Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due
to the conversion to %pI (in this networking merge) and the addition of
doing IPv6 addresses (from the earlier merge of CIFS).
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (31 commits)
[CIFS] Remove redundant test
[CIFS] make sure that DFS pathnames are properly formed
Remove an already-checked error condition in SendReceiveBlockingLock
Streamline SendReceiveBlockingLock: Use "goto out:" in an error condition
Streamline SendReceiveBlockingLock: Use "goto out:" in an error condition
[CIFS] Streamline SendReceive[2] by using "goto out:" in an error condition
Slightly streamline SendReceive[2]
Check the return value of cifs_sign_smb[2]
[CIFS] Cleanup: Move the check for too large R/W requests
[CIFS] Slightly simplify wait_for_free_request(), remove an unnecessary "else" branch
Simplify allocate_mid() slightly: Remove some unnecessary "else" branches
[CIFS] In SendReceive, move consistency check out of the mutexed region
cifs: store password in tcon
cifs: have calc_lanman_hash take more granular args
cifs: zero out session password before freeing it
cifs: fix wait_for_response to time out sleeping processes correctly
[CIFS] Can not mount with prefixpath if root directory of share is inaccessible
[CIFS] various minor cleanups pointed out by checkpatch script
[CIFS] fix typo
[CIFS] remove sparse warning
...
Fix trivial conflict in fs/cifs/cifs_fs_sb.h due to comment changes for
the CIFS_MOUNT_xyz bit definitions between cifs updates and security
updates.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (26 commits)
IB/mlx4: Set ownership bit correctly when copying CQEs during CQ resize
RDMA/nes: Remove tx_free_list
RDMA/cma: Add IPv6 support
RDMA/addr: Add support for translating IPv6 addresses
mlx4_core: Delete incorrect comment
mlx4_core: Add support for multiple completion event vectors
IB/iser: Avoid recv buffer exhaustion caused by unexpected PDUs
IB/ehca: Remove redundant test of vpage
IB/ehca: Replace modulus operations in flush error completion path
IB/ipath: Add locking for interrupt use of ipath_pd contexts vs free
IB/ipath: Fix spi_pioindex value
IB/ipath: Only do 1X workaround on rev1 chips
IB/ipath: Don't count IB symbol and link errors unless link is UP
IB/ipath: Check return value of dma_map_single()
IB/ipath: Fix PSN of send WQEs after an RDMA read resend
RDMA/nes: Cleanup warnings
RDMA/nes: Add loopback check to make_cm_node()
RDMA/nes: Check cqp_avail_reqs is empty after locking the list
RDMA/nes: Fix TCP compliance test failures
RDMA/nes: Forward packets for a new connection with stale APBVT entry
...
* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (241 commits)
sched, trace: update trace_sched_wakeup()
tracing/ftrace: don't trace on early stage of a secondary cpu boot, v3
Revert "x86: disable X86_PTRACE_BTS"
ring-buffer: prevent false positive warning
ring-buffer: fix dangling commit race
ftrace: enable format arguments checking
x86, bts: memory accounting
x86, bts: add fork and exit handling
ftrace: introduce tracing_reset_online_cpus() helper
tracing: fix warnings in kernel/trace/trace_sched_switch.c
tracing: fix warning in kernel/trace/trace.c
tracing/ring-buffer: remove unused ring_buffer size
trace: fix task state printout
ftrace: add not to regex on filtering functions
trace: better use of stack_trace_enabled for boot up code
trace: add a way to enable or disable the stack tracer
x86: entry_64 - introduce FTRACE_ frame macro v2
tracing/ftrace: add the printk-msg-only option
tracing/ftrace: use preempt_enable_no_resched_notrace in ring_buffer_time_stamp()
x86, bts: correctly report invalid bts records
...
Fixed up trivial conflict in scripts/recordmcount.pl due to SH bits
being already partly merged by the SH merge.
* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (246 commits)
x86: traps.c replace #if CONFIG_X86_32 with #ifdef CONFIG_X86_32
x86: PAT: fix address types in track_pfn_vma_new()
x86: prioritize the FPU traps for the error code
x86: PAT: pfnmap documentation update changes
x86: PAT: move track untrack pfnmap stubs to asm-generic
x86: PAT: remove follow_pfnmap_pte in favor of follow_phys
x86: PAT: modify follow_phys to return phys_addr prot and return value
x86: PAT: clarify is_linear_pfn_mapping() interface
x86: ia32_signal: remove unnecessary declaration
x86: common.c boot_cpu_stack and boot_exception_stacks should be static
x86: fix intel x86_64 llc_shared_map/cpu_llc_id anomolies
x86: fix warning in arch/x86/kernel/microcode_amd.c
x86: ia32.h: remove unused struct sigfram32 and rt_sigframe32
x86: asm-offset_64: use rt_sigframe_ia32
x86: sigframe.h: include headers for dependency
x86: traps.c declare functions before they get used
x86: PAT: update documentation to cover pgprot and remap_pfn related changes - v3
x86: PAT: add pgprot_writecombine() interface for drivers - v3
x86: PAT: change pgprot_noncached to uc_minus instead of strong uc - v3
x86: PAT: implement track/untrack of pfnmap regions for x86 - v3
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (105 commits)
SELinux: don't check permissions for kernel mounts
security: pass mount flags to security_sb_kern_mount()
SELinux: correctly detect proc filesystems of the form "proc/foo"
Audit: Log TIOCSTI
user namespaces: document CFS behavior
user namespaces: require cap_set{ug}id for CLONE_NEWUSER
user namespaces: let user_ns be cloned with fairsched
CRED: fix sparse warnings
User namespaces: use the current_user_ns() macro
User namespaces: set of cleanups (v2)
nfsctl: add headers for credentials
coda: fix creds reference
capabilities: define get_vfs_caps_from_disk when file caps are not enabled
CRED: Allow kernel services to override LSM settings for task actions
CRED: Add a kernel_service object class to SELinux
CRED: Differentiate objective and effective subjective credentials on a task
CRED: Documentation
CRED: Use creds in file structs
CRED: Prettify commoncap.c
CRED: Make execve() take advantage of copy-on-write credentials
...
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (132 commits)
sh: oprofile: Fix up the module build.
sh: add UIO support for JPU on SH7722.
serial: sh-sci: Fix up port pinmux for SH7366.
sh: mach-rsk: Use uImage generation by default for rsk7201/7203.
sh: mach-sh03: Fix up pata_platform build breakage.
sh: enable deferred io LCDC on Migo-R
video: sh_mobile_lcdcfb deferred io support
video: deferred io with physically contiguous memory
video: deferred io cleanup
video: fix deferred io fsync()
sh: add LCDC interrupt configuration to AP325 and Migo-R
sh_mobile_lcdc: use FB_SYS helpers instead of FB_CFB
sh: split coherent pages
sh: dma: Kill off ISA DMA wrapper.
sh: Conditionalize the code dumper on CONFIG_DUMP_CODE.
sh: Kill off the unused SH_ALPHANUMERIC debug option.
sh: Enable skipping of bss on debug platforms for sh32 also.
doc: Update sh cpufreq documentation.
sh: mrshpc_setup_windows() needs to be inline.
serial: sh-sci: sci_poll_get_char() is only used by CONFIG_CONSOLE_POLL.
...
Add missing check for Atari in free_irq() call, which could cause problems on
multi-platform m68k kernels.
Reported-by: Brad Boyer <flar@allandria.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Remove the Mac VBL interrupt code as it doesn't work properly and
doesn't bring any benefit when fixed. Also remove unused
DEFAULT_CURSOR_BLINK_RATE macro and irqres variable.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fix the warning: trigraph ??/ ignored, use -trigraphs to enable
caused by the recent removal of -traditional option.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Add some __iomem annotations. Remove some volatile qualifiers to fix
several compiler warnings: "passing arg 1 of `iounmap' discards qualifiers
from pointer target type".
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
No-one seems to know how to mask individual baboon interrupts, so we just
mask the umbrella IRQ. This will work as long as only the IDE driver uses
the baboon chip (it can't deadlock). Use mac_enable_irq/mac_disable_irq
rather than enable_irq/disable_irq because the latter routines count the
depth of nested calls which triggers a warning and call trace because
IRQ_NUBUS_C is enabled twice in a row (once when the baboon handler is
registered, and once when the IDE IRQ is registered).
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Remove some more cruft from machw.h and drop the #include where it isn't
needed.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Jaswinder Singh Rajput