dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

GPIO driver changes for v3.5 merge window 

Lots of gpio changes, both to core code and drivers.  Changes do touch
 architecture code to remove the need for separate arm/gpio.h includes
 in most architectures.  Some new drivers are added, and a number of
 gpio drivers are converted to use irq_domains for gpio inputs used as
 interrupts.  Device tree support has been amended to allow multiple
 gpio_chips to use the same device tree node.  Remaining changes are
 primarily bug fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPvpFBAAoJEEFnBt12D9kB50EP/0q2co+Ddlz4DWM07TLMgTw8
 eCSi79+oB85RcE+0FlAo/SJu9VlYDKSLT3wMbIyycfJi3cUtOb+hay0j+wxcn4bz
 G2qXj2Het5rX6hFI2tSCvJfDqMwU0wEygn9a6a/bw3VGSOIVmMTmRswrbbBcFzVu
 8xobviN7LANLEZyhd4Ip5YfrcWH9ABmmhZX7ihn1AJubVL47xGo0uds9ZFX1sAKB
 Zyr80+BeUK7mhZ74UUfQHtS+x24JD62OLM9eaQN0/BBAqBewQJlxhMakPbTGmcuO
 Vy3CPmZiWw6tdVWgKvxE7cIXLI4YbB2B6w2TRJBBkFAlz4RsO2bFU/ibEv1vg9YE
 oxAUelMj0INdY4iRT135fDJTIGauWon22Tqd2MVtun4r6fwcL0BgFYN6yCMtEqbx
 bpYkKTi6tdyE7k2Ph+carCIuw9SwOk/4pm1xCWC0k6YdAnRE0zykCLvAuAabpmzs
 i/H1jcp/F4KSYldEoDlGYG4lFZiISthxOy9l6/d4GrBj723attrmztolMfrpFLF6
 XPTf7HODQFmZ6n7mBIjCg4hoqydAYyKcW7lROc7DKkEXIWOeeeA+EoTytkwPLLz5
 CBLoZfDoqUT8xa2vv4MZ/+G9chSDi5vMryqEYi9tXMbVEZW31xqh6hxk0xPMcY13
 qVAaRlcz49AQjWq/0vR4
 =U6hj
 -----END PGP SIGNATURE-----

Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6

Pull GPIO driver changes from Grant Likely:
 "Lots of gpio changes, both to core code and drivers.

  Changes do touch architecture code to remove the need for separate
  arm/gpio.h includes in most architectures.

  Some new drivers are added, and a number of gpio drivers are converted
  to use irq_domains for gpio inputs used as interrupts.  Device tree
  support has been amended to allow multiple gpio_chips to use the same
  device tree node.

  Remaining changes are primarily bug fixes."

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: (33 commits)
  gpio/generic: initialize basic_mmio_gpio shadow variables properly
  gpiolib: Remove 'const' from data argument of gpiochip_find()
  gpio/rc5t583: add gpio driver for RICOH PMIC RC5T583
  gpiolib: quiet gpiochip_add boot message noise
  gpio: mpc8xxx: Prevent NULL pointer deref in demux handler
  gpio/lpc32xx: Add device tree support
  gpio: Adjust of_xlate API to support multiple GPIO chips
  gpiolib: Implement devm_gpio_request_one()
  gpio-mcp23s08: dbg_show: fix pullup configuration display
  Add support for TCA6424A
  gpio/omap: (re)fix wakeups on level-triggered GPIOs
  gpio/omap: fix broken context restore for non-OFF mode transitions
  gpio/omap: fix missing check in *_runtime_suspend()
  gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume()
  gpio/omap: remove suspend/resume callbacks
  gpio/omap: remove retrigger variable in gpio_irq_handler
  gpio/omap: remove saved_wakeup field from struct gpio_bank
  gpio/omap: remove suspend_wakeup field from struct gpio_bank
  gpio/omap: remove saved_fallingdetect, saved_risingdetect
  gpio/omap: remove virtual_irq_start variable
  ...

Conflicts:
	drivers/gpio/gpio-samsung.c
This commit is contained in:
Linus Torvalds 2012-05-24 14:01:46 -07:00
parent 0708500d49 3e11f7b840
commit b1bf7d4d1b
53 changed files with 1212 additions and 880 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

43
Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt Normal file
View File

@ -0,0 +1,43 @@
NXP LPC32xx SoC GPIO controller
Required properties:
- compatible: must be "nxp,lpc3220-gpio"
- reg: Physical base address and length of the controller's registers.
- gpio-controller: Marks the device node as a GPIO controller.
- #gpio-cells: Should be 3:
1) bank:
0: GPIO P0
1: GPIO P1
2: GPIO P2
3: GPIO P3
4: GPI P3
5: GPO P3
2) pin number
3) optional parameters:
- bit 0 specifies polarity (0 for normal, 1 for inverted)
- reg: Index of the GPIO group
Example:
gpio: gpio@40028000 {
compatible = "nxp,lpc3220-gpio";
reg = <0x40028000 0x1000>;
gpio-controller;
#gpio-cells = <3>; /* bank, pin, flags */
};
leds {
compatible = "gpio-leds";
led0 {
gpios = <&gpio 5 1 1>; /* GPO_P3 1, active low */
linux,default-trigger = "heartbeat";
default-state = "off";
};
led1 {
gpios = <&gpio 5 14 1>; /* GPO_P3 14, active low */
linux,default-trigger = "timer";
default-state = "off";
};
};

3
Documentation/gpio.txt
View File

@ -322,6 +322,9 @@ where 'flags' is currently defined to specify the following properties:
* GPIOF_OPEN_DRAIN - gpio pin is open drain type.
* GPIOF_OPEN_SOURCE - gpio pin is open source type.
* GPIOF_EXPORT_DIR_FIXED - export gpio to sysfs, keep direction
* GPIOF_EXPORT_DIR_CHANGEABLE - also export, allow changing direction
since GPIOF_INIT_* are only valid when configured as output, so group valid
combinations as:

59
arch/alpha/include/asm/gpio.h
View File

@ -1,55 +1,4 @@
/*
* Generic GPIO API implementation for Alpha.
*
* A stright copy of that for PowerPC which was:
*
* Copyright (c) 2007-2008 MontaVista Software, Inc.
*
* Author: Anton Vorontsov <avorontsov@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef _ASM_ALPHA_GPIO_H
#define _ASM_ALPHA_GPIO_H
#include <linux/errno.h>
#include <asm-generic/gpio.h>
#ifdef CONFIG_GPIOLIB
/*
* We don't (yet) implement inlined/rapid versions for on-chip gpios.
* Just call gpiolib.
*/
static inline int gpio_get_value(unsigned int gpio)
{
return __gpio_get_value(gpio);
}
static inline void gpio_set_value(unsigned int gpio, int value)
{
__gpio_set_value(gpio, value);
}
static inline int gpio_cansleep(unsigned int gpio)
{
return __gpio_cansleep(gpio);
}
static inline int gpio_to_irq(unsigned int gpio)
{
return __gpio_to_irq(gpio);
}
static inline int irq_to_gpio(unsigned int irq)
{
return -EINVAL;
}
#endif /* CONFIG_GPIOLIB */
#endif /* _ASM_ALPHA_GPIO_H */
#ifndef __LINUX_GPIO_H
#warning Include linux/gpio.h instead of asm/gpio.h
#include <linux/gpio.h>
#endif

1
arch/arm/Kconfig
View File

@ -1,6 +1,7 @@
config ARM
bool
default y
select ARCH_HAVE_CUSTOM_GPIO_H
select HAVE_AOUT
select HAVE_DMA_API_DEBUG
select HAVE_IDE if PCI || ISA || PCMCIA

3
arch/arm/mach-imx/mach-mx35_3ds.c
View File

@ -98,8 +98,7 @@ static struct i2c_board_info __initdata i2c_devices_3ds[] = {
static int lcd_power_gpio = -ENXIO;
static int mc9s08dz60_gpiochip_match(struct gpio_chip *chip,
const void *data)
static int mc9s08dz60_gpiochip_match(struct gpio_chip *chip, void *data)
{
return !strcmp(chip->label, data);
}

9
arch/arm/mach-lpc32xx/include/mach/gpio.h
View File

@ -1 +1,8 @@
/* empty */
#ifndef __MACH_GPIO_H
#define __MACH_GPIO_H
#include "gpio-lpc32xx.h"
#define ARCH_NR_GPIOS (LPC32XX_GPO_P3_GRP + LPC32XX_GPO_P3_MAX)
#endif /* __MACH_GPIO_H */

2
arch/arm/mach-omap1/gpio15xx.c
View File

@ -46,7 +46,6 @@ static struct omap_gpio_reg_offs omap15xx_mpuio_regs = {
};
static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
.virtual_irq_start = IH_MPUIO_BASE,
.is_mpuio = true,
.bank_width = 16,
.bank_stride = 1,
@ -89,7 +88,6 @@ static struct omap_gpio_reg_offs omap15xx_gpio_regs = {
};
static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
.virtual_irq_start = IH_GPIO_BASE,
.bank_width = 16,
.regs = &omap15xx_gpio_regs,
};

5
arch/arm/mach-omap1/gpio16xx.c
View File

@ -52,7 +52,6 @@ static struct omap_gpio_reg_offs omap16xx_mpuio_regs = {
};
static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
.virtual_irq_start = IH_MPUIO_BASE,
.is_mpuio = true,
.bank_width = 16,
.bank_stride = 1,
@ -99,7 +98,6 @@ static struct omap_gpio_reg_offs omap16xx_gpio_regs = {
};
static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
.virtual_irq_start = IH_GPIO_BASE,
.bank_width = 16,
.regs = &omap16xx_gpio_regs,
};
@ -128,7 +126,6 @@ static struct __initdata resource omap16xx_gpio2_resources[] = {
};
static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = {
.virtual_irq_start = IH_GPIO_BASE + 16,
.bank_width = 16,
.regs = &omap16xx_gpio_regs,
};
@ -157,7 +154,6 @@ static struct __initdata resource omap16xx_gpio3_resources[] = {
};
static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = {
.virtual_irq_start = IH_GPIO_BASE + 32,
.bank_width = 16,
.regs = &omap16xx_gpio_regs,
};
@ -186,7 +182,6 @@ static struct __initdata resource omap16xx_gpio4_resources[] = {
};
static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = {
.virtual_irq_start = IH_GPIO_BASE + 48,
.bank_width = 16,
.regs = &omap16xx_gpio_regs,
};

7
arch/arm/mach-omap1/gpio7xx.c
View File

@ -51,7 +51,6 @@ static struct omap_gpio_reg_offs omap7xx_mpuio_regs = {
};
static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
.virtual_irq_start = IH_MPUIO_BASE,
.is_mpuio = true,
.bank_width = 16,
.bank_stride = 2,
@ -93,7 +92,6 @@ static struct omap_gpio_reg_offs omap7xx_gpio_regs = {
};
static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
.virtual_irq_start = IH_GPIO_BASE,
.bank_width = 32,
.regs = &omap7xx_gpio_regs,
};
@ -122,7 +120,6 @@ static struct __initdata resource omap7xx_gpio2_resources[] = {
};
static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = {
.virtual_irq_start = IH_GPIO_BASE + 32,
.bank_width = 32,
.regs = &omap7xx_gpio_regs,
};
@ -151,7 +148,6 @@ static struct __initdata resource omap7xx_gpio3_resources[] = {
};
static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = {
.virtual_irq_start = IH_GPIO_BASE + 64,
.bank_width = 32,
.regs = &omap7xx_gpio_regs,
};
@ -180,7 +176,6 @@ static struct __initdata resource omap7xx_gpio4_resources[] = {
};
static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = {
.virtual_irq_start = IH_GPIO_BASE + 96,
.bank_width = 32,
.regs = &omap7xx_gpio_regs,
};
@ -209,7 +204,6 @@ static struct __initdata resource omap7xx_gpio5_resources[] = {
};
static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = {
.virtual_irq_start = IH_GPIO_BASE + 128,
.bank_width = 32,
.regs = &omap7xx_gpio_regs,
};
@ -238,7 +232,6 @@ static struct __initdata resource omap7xx_gpio6_resources[] = {
};
static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = {
.virtual_irq_start = IH_GPIO_BASE + 160,
.bank_width = 32,
.regs = &omap7xx_gpio_regs,
};

3
arch/arm/mach-omap2/gpio.c
View File

@ -56,7 +56,6 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
dev_attr = (struct omap_gpio_dev_attr *)oh->dev_attr;
pdata->bank_width = dev_attr->bank_width;
pdata->dbck_flag = dev_attr->dbck_flag;
pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1);
pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL);
if (!pdata->regs) {
@ -103,6 +102,8 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
pdata->regs->dataout = OMAP4_GPIO_DATAOUT;
pdata->regs->set_dataout = OMAP4_GPIO_SETDATAOUT;
pdata->regs->clr_dataout = OMAP4_GPIO_CLEARDATAOUT;
pdata->regs->irqstatus_raw0 = OMAP4_GPIO_IRQSTATUSRAW0;
pdata->regs->irqstatus_raw1 = OMAP4_GPIO_IRQSTATUSRAW1;
pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0;
pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1;
pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0;

3
arch/arm/plat-omap/include/plat/gpio.h
View File

@ -172,6 +172,8 @@ struct omap_gpio_reg_offs {
u16 clr_dataout;
u16 irqstatus;
u16 irqstatus2;
u16 irqstatus_raw0;
u16 irqstatus_raw1;
u16 irqenable;
u16 irqenable2;
u16 set_irqenable;
@ -193,7 +195,6 @@ struct omap_gpio_reg_offs {
};
struct omap_gpio_platform_data {
u16 virtual_irq_start;
int bank_type;
int bank_width; /* GPIO bank width */
int bank_stride; /* Only needed for omap1 MPUIO */

1
arch/avr32/Kconfig
View File

@ -11,6 +11,7 @@ config AVR32
select GENERIC_ATOMIC64
select HARDIRQS_SW_RESEND
select GENERIC_IRQ_SHOW
select ARCH_HAVE_CUSTOM_GPIO_H
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select GENERIC_CLOCKEVENTS
help

1
arch/blackfin/Kconfig
View File

@ -31,6 +31,7 @@ config BLACKFIN
select HAVE_KERNEL_LZO if RAMKERNEL
select HAVE_OPROFILE
select HAVE_PERF_EVENTS
select ARCH_HAVE_CUSTOM_GPIO_H
select ARCH_WANT_OPTIONAL_GPIOLIB
select HAVE_GENERIC_HARDIRQS
select GENERIC_ATOMIC64

59
arch/ia64/include/asm/gpio.h
View File

@ -1,55 +1,4 @@
/*
* Generic GPIO API implementation for IA-64.
*
* A stright copy of that for PowerPC which was:
*
* Copyright (c) 2007-2008 MontaVista Software, Inc.
*
* Author: Anton Vorontsov <avorontsov@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef _ASM_IA64_GPIO_H
#define _ASM_IA64_GPIO_H
#include <linux/errno.h>
#include <asm-generic/gpio.h>
#ifdef CONFIG_GPIOLIB
/*
* We don't (yet) implement inlined/rapid versions for on-chip gpios.
* Just call gpiolib.
*/
static inline int gpio_get_value(unsigned int gpio)
{
return __gpio_get_value(gpio);
}
static inline void gpio_set_value(unsigned int gpio, int value)
{
__gpio_set_value(gpio, value);
}
static inline int gpio_cansleep(unsigned int gpio)
{
return __gpio_cansleep(gpio);
}
static inline int gpio_to_irq(unsigned int gpio)
{
return __gpio_to_irq(gpio);
}
static inline int irq_to_gpio(unsigned int irq)
{
return -EINVAL;
}
#endif /* CONFIG_GPIOLIB */
#endif /* _ASM_IA64_GPIO_H */
#ifndef __LINUX_GPIO_H
#warning Include linux/gpio.h instead of asm/gpio.h
#include <linux/gpio.h>
#endif

1
arch/m68k/Kconfig.cpu
View File

@ -24,6 +24,7 @@ config COLDFIRE
bool "Coldfire CPU family support"
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAVE_CUSTOM_GPIO_H
select CPU_HAS_NO_BITFIELDS
select CPU_HAS_NO_MULDIV64
select GENERIC_CSUM

57
arch/microblaze/include/asm/gpio.h
View File

@ -1,53 +1,4 @@
/*
* Generic GPIO API implementation for PowerPC.
*
* Copyright (c) 2007-2008 MontaVista Software, Inc.
*
* Author: Anton Vorontsov <avorontsov@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef _ASM_MICROBLAZE_GPIO_H
#define _ASM_MICROBLAZE_GPIO_H
#include <linux/errno.h>
#include <asm-generic/gpio.h>
#ifdef CONFIG_GPIOLIB
/*
* We don't (yet) implement inlined/rapid versions for on-chip gpios.
* Just call gpiolib.
*/
static inline int gpio_get_value(unsigned int gpio)
{
return __gpio_get_value(gpio);
}
static inline void gpio_set_value(unsigned int gpio, int value)
{
__gpio_set_value(gpio, value);
}
static inline int gpio_cansleep(unsigned int gpio)
{
return __gpio_cansleep(gpio);
}
static inline int gpio_to_irq(unsigned int gpio)
{
return __gpio_to_irq(gpio);
}
static inline int irq_to_gpio(unsigned int irq)
{
return -EINVAL;
}
#endif /* CONFIG_GPIOLIB */
#endif /* _ASM_MICROBLAZE_GPIO_H */
#ifndef __LINUX_GPIO_H
#warning Include linux/gpio.h instead of asm/gpio.h
#include <linux/gpio.h>
#endif

1
arch/mips/Kconfig
View File

@ -8,6 +8,7 @@ config MIPS
select HAVE_PERF_EVENTS
select PERF_USE_VMALLOC
select HAVE_ARCH_KGDB
select ARCH_HAVE_CUSTOM_GPIO_H
select HAVE_FUNCTION_TRACER
select HAVE_FUNCTION_TRACE_MCOUNT_TEST
select HAVE_DYNAMIC_FTRACE

69
arch/openrisc/include/asm/gpio.h
View File

@ -1,65 +1,4 @@
/*
* OpenRISC Linux
*
* Linux architectural port borrowing liberally from similar works of
* others. All original copyrights apply as per the original source
* declaration.
*
* OpenRISC implementation:
* Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
* Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
* et al.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __ASM_OPENRISC_GPIO_H
#define __ASM_OPENRISC_GPIO_H
#include <linux/errno.h>
#include <asm-generic/gpio.h>
#ifdef CONFIG_GPIOLIB
/*
* OpenRISC (or1k) does not have on-chip GPIO's so there is not really
* any standardized implementation that makes sense here. If passing
* through gpiolib becomes a bottleneck then it may make sense, on a
* case-by-case basis, to implement these inlined/rapid versions.
*
* Just call gpiolib.
*/
static inline int gpio_get_value(unsigned int gpio)
{
return __gpio_get_value(gpio);
}
static inline void gpio_set_value(unsigned int gpio, int value)
{
__gpio_set_value(gpio, value);
}
static inline int gpio_cansleep(unsigned int gpio)
{
return __gpio_cansleep(gpio);
}
/*
* Not implemented, yet.
*/
static inline int gpio_to_irq(unsigned int gpio)
{
return -ENOSYS;
}
static inline int irq_to_gpio(unsigned int irq)
{
return -EINVAL;
}
#endif /* CONFIG_GPIOLIB */
#endif /* __ASM_OPENRISC_GPIO_H */
#ifndef __LINUX_GPIO_H
#warning Include linux/gpio.h instead of asm/gpio.h
#include <linux/gpio.h>
#endif

57
arch/powerpc/include/asm/gpio.h
View File

@ -1,53 +1,4 @@
/*
* Generic GPIO API implementation for PowerPC.
*
* Copyright (c) 2007-2008 MontaVista Software, Inc.
*
* Author: Anton Vorontsov <avorontsov@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __ASM_POWERPC_GPIO_H
#define __ASM_POWERPC_GPIO_H
#include <linux/errno.h>
#include <asm-generic/gpio.h>
#ifdef CONFIG_GPIOLIB
/*
* We don't (yet) implement inlined/rapid versions for on-chip gpios.
* Just call gpiolib.
*/
static inline int gpio_get_value(unsigned int gpio)
{
return __gpio_get_value(gpio);
}
static inline void gpio_set_value(unsigned int gpio, int value)
{
__gpio_set_value(gpio, value);
}
static inline int gpio_cansleep(unsigned int gpio)
{
return __gpio_cansleep(gpio);
}
static inline int gpio_to_irq(unsigned int gpio)
{
return __gpio_to_irq(gpio);
}
static inline int irq_to_gpio(unsigned int irq)
{
return -EINVAL;
}
#endif /* CONFIG_GPIOLIB */
#endif /* __ASM_POWERPC_GPIO_H */
#ifndef __LINUX_GPIO_H
#warning Include linux/gpio.h instead of asm/gpio.h
#include <linux/gpio.h>
#endif

1
arch/sh/Kconfig
View File

@ -13,6 +13,7 @@ config SUPERH
select HAVE_DMA_ATTRS
select HAVE_IRQ_WORK
select HAVE_PERF_EVENTS
select ARCH_HAVE_CUSTOM_GPIO_H
select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB || CPU_SH4A)
select PERF_USE_VMALLOC
select HAVE_KERNEL_GZIP

40
arch/sparc/include/asm/gpio.h
View File

@ -1,36 +1,4 @@
#ifndef __ASM_SPARC_GPIO_H
#define __ASM_SPARC_GPIO_H
#include <linux/errno.h>
#include <asm-generic/gpio.h>
#ifdef CONFIG_GPIOLIB
static inline int gpio_get_value(unsigned int gpio)
{
return __gpio_get_value(gpio);
}
static inline void gpio_set_value(unsigned int gpio, int value)
{
__gpio_set_value(gpio, value);
}
static inline int gpio_cansleep(unsigned int gpio)
{
return __gpio_cansleep(gpio);
}
static inline int gpio_to_irq(unsigned int gpio)
{
return -ENOSYS;
}
static inline int irq_to_gpio(unsigned int irq)
{
return -EINVAL;
}
#endif /* CONFIG_GPIOLIB */
#endif /* __ASM_SPARC_GPIO_H */
#ifndef __LINUX_GPIO_H
#warning Include linux/gpio.h instead of asm/gpio.h
#include <linux/gpio.h>
#endif

1
arch/unicore32/Kconfig
View File

@ -8,6 +8,7 @@ config UNICORE32
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_LZO
select HAVE_KERNEL_LZMA
select ARCH_HAVE_CUSTOM_GPIO_H
select GENERIC_FIND_FIRST_BIT
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW

57
arch/x86/include/asm/gpio.h
View File

@ -1,53 +1,4 @@
/*
* Generic GPIO API implementation for x86.
*
* Derived from the generic GPIO API for powerpc:
*
* Copyright (c) 2007-2008 MontaVista Software, Inc.
*
* Author: Anton Vorontsov <avorontsov@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef _ASM_X86_GPIO_H
#define _ASM_X86_GPIO_H
#include <asm-generic/gpio.h>
#ifdef CONFIG_GPIOLIB
/*
* Just call gpiolib.
*/
static inline int gpio_get_value(unsigned int gpio)
{
return __gpio_get_value(gpio);
}
static inline void gpio_set_value(unsigned int gpio, int value)
{
__gpio_set_value(gpio, value);
}
static inline int gpio_cansleep(unsigned int gpio)
{
return __gpio_cansleep(gpio);
}
static inline int gpio_to_irq(unsigned int gpio)
{
return __gpio_to_irq(gpio);
}
static inline int irq_to_gpio(unsigned int irq)
{
return -EINVAL;
}
#endif /* CONFIG_GPIOLIB */
#endif /* _ASM_X86_GPIO_H */
#ifndef __LINUX_GPIO_H
#warning Include linux/gpio.h instead of asm/gpio.h
#include <linux/gpio.h>
#endif

60
arch/xtensa/include/asm/gpio.h
View File

@ -1,56 +1,4 @@
/*
* Generic GPIO API implementation for xtensa.
*
* Stolen from x86, which is derived from the generic GPIO API for powerpc:
*
* Copyright (c) 2007-2008 MontaVista Software, Inc.
*
* Author: Anton Vorontsov <avorontsov@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef _ASM_XTENSA_GPIO_H
#define _ASM_XTENSA_GPIO_H
#include <asm-generic/gpio.h>
#ifdef CONFIG_GPIOLIB
/*
* Just call gpiolib.
*/
static inline int gpio_get_value(unsigned int gpio)
{
return __gpio_get_value(gpio);
}
static inline void gpio_set_value(unsigned int gpio, int value)
{
__gpio_set_value(gpio, value);
}
static inline int gpio_cansleep(unsigned int gpio)
{
return __gpio_cansleep(gpio);
}
static inline int gpio_to_irq(unsigned int gpio)
{
return __gpio_to_irq(gpio);
}
/*
* Not implemented, yet.
*/
static inline int irq_to_gpio(unsigned int irq)
{
return -EINVAL;
}
#endif /* CONFIG_GPIOLIB */
#endif /* _ASM_XTENSA_GPIO_H */
#ifndef __LINUX_GPIO_H
#warning Include linux/gpio.h instead of asm/gpio.h
#include <linux/gpio.h>
#endif

39
drivers/gpio/Kconfig
View File

@ -2,6 +2,14 @@
# GPIO infrastructure and drivers
#
config ARCH_HAVE_CUSTOM_GPIO_H
bool
help
Selecting this config option from the architecture Kconfig allows
the architecture to provide a custom asm/gpio.h implementation
overriding the default implementations. New uses of this are
strongly discouraged.
config ARCH_WANT_OPTIONAL_GPIOLIB
bool
help
@ -37,6 +45,10 @@ menuconfig GPIOLIB
if GPIOLIB
config OF_GPIO
def_bool y
depends on OF && !SPARC
config DEBUG_GPIO
bool "Debug GPIO calls"
depends on DEBUG_KERNEL
@ -249,7 +261,7 @@ config GPIO_MC9S08DZ60
Select this to enable the MC9S08DZ60 GPIO driver
config GPIO_PCA953X
tristate "PCA953x, PCA955x, TCA64xx, and MAX7310 I/O ports"
tristate "PCA953x, PCA955x, PCA957x, TCA64xx, and MAX7310 I/O ports"
depends on I2C
help
Say yes here to provide access to several register-oriented
@ -258,10 +270,11 @@ config GPIO_PCA953X
4 bits: pca9536, pca9537
8 bits: max7310, pca9534, pca9538, pca9554, pca9557,
tca6408
8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554,
pca9556, pca9557, pca9574, tca6408
16 bits: pca9535, pca9539, pca9555, tca6416
16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575,
tca6416
config GPIO_PCA953X_IRQ
bool "Interrupt controller support for PCA953x"
@ -294,6 +307,15 @@ config GPIO_PCF857X
This driver provides an in-kernel interface to those GPIOs using
platform-neutral GPIO calls.
config GPIO_RC5T583
bool "RICOH RC5T583 GPIO"
depends on MFD_RC5T583
help
Select this option to enable GPIO driver for the Ricoh RC5T583
chip family.
This driver provides the support for driving/reading the gpio pins
of RC5T583 device through standard gpio library.
config GPIO_SX150X
bool "Semtech SX150x I2C GPIO expander"
depends on I2C=y
@ -405,6 +427,7 @@ config GPIO_BT8XX
config GPIO_LANGWELL
bool "Intel Langwell/Penwell GPIO support"
depends on PCI && X86
select IRQ_DOMAIN
help
Say Y here to support Intel Langwell/Penwell GPIO.
@ -520,4 +543,12 @@ config GPIO_TPS65910
help
Select this option to enable GPIO driver for the TPS65910
chip family.
config GPIO_MSIC
bool "Intel MSIC mixed signal gpio support"
depends on MFD_INTEL_MSIC
help
Enable support for GPIO on intel MSIC controllers found in
intel MID devices
endif

3
drivers/gpio/Makefile
View File

@ -3,6 +3,7 @@
ccflags-$(CONFIG_DEBUG_GPIO) += -DDEBUG
obj-$(CONFIG_GPIOLIB) += gpiolib.o devres.o
obj-$(CONFIG_OF_GPIO) += gpiolib-of.o
# Device drivers. Generally keep list sorted alphabetically
obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o
@ -33,6 +34,7 @@ obj-$(CONFIG_GPIO_MCP23S08) += gpio-mcp23s08.o
obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o
obj-$(CONFIG_GPIO_MPC5200) += gpio-mpc5200.o
obj-$(CONFIG_GPIO_MPC8XXX) += gpio-mpc8xxx.o
obj-$(CONFIG_GPIO_MSIC) += gpio-msic.o
obj-$(CONFIG_GPIO_MSM_V1) += gpio-msm-v1.o
obj-$(CONFIG_GPIO_MSM_V2) += gpio-msm-v2.o
obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o
@ -43,6 +45,7 @@ obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o

29
drivers/gpio/devres.c
View File

@ -70,6 +70,35 @@ int devm_gpio_request(struct device *dev, unsigned gpio, const char *label)
}
EXPORT_SYMBOL(devm_gpio_request);
/**
* devm_gpio_request_one - request a single GPIO with initial setup
* @dev: device to request for
* @gpio: the GPIO number
* @flags: GPIO configuration as specified by GPIOF_*
* @label: a literal description string of this GPIO
*/
int devm_gpio_request_one(struct device *dev, unsigned gpio,
unsigned long flags, const char *label)
{
unsigned *dr;
int rc;
dr = devres_alloc(devm_gpio_release, sizeof(unsigned), GFP_KERNEL);
if (!dr)
return -ENOMEM;
rc = gpio_request_one(gpio, flags, label);
if (rc) {
devres_free(dr);
return rc;
}
*dr = gpio;
devres_add(dev, dr);
return 0;
}
/**
* devm_gpio_free - free an interrupt
* @dev: device to free gpio for

12
drivers/gpio/gpio-bt8xx.c
View File

@ -328,17 +328,7 @@ static struct pci_driver bt8xxgpio_pci_driver = {
.resume = bt8xxgpio_resume,
};
static int __init bt8xxgpio_init(void)
{
return pci_register_driver(&bt8xxgpio_pci_driver);
}
module_init(bt8xxgpio_init)
static void __exit bt8xxgpio_exit(void)
{
pci_unregister_driver(&bt8xxgpio_pci_driver);
}
module_exit(bt8xxgpio_exit)
module_pci_driver(bt8xxgpio_pci_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Michael Buesch");

2
drivers/gpio/gpio-ep93xx.c
View File

@ -325,7 +325,7 @@ static int ep93xx_gpio_add_bank(struct bgpio_chip *bgc, struct device *dev,
void __iomem *dir = mmio_base + bank->dir;
int err;
err = bgpio_init(bgc, dev, 1, data, NULL, NULL, dir, NULL, false);
err = bgpio_init(bgc, dev, 1, data, NULL, NULL, dir, NULL, 0);
if (err)
return err;

16
drivers/gpio/gpio-generic.c
View File

@ -364,7 +364,7 @@ EXPORT_SYMBOL_GPL(bgpio_remove);
int bgpio_init(struct bgpio_chip *bgc, struct device *dev,
unsigned long sz, void __iomem *dat, void __iomem *set,
void __iomem *clr, void __iomem *dirout, void __iomem *dirin,
bool big_endian)
unsigned long flags)
{
int ret;
@ -385,7 +385,7 @@ int bgpio_init(struct bgpio_chip *bgc, struct device *dev,
if (ret)
return ret;
ret = bgpio_setup_accessors(dev, bgc, big_endian);
ret = bgpio_setup_accessors(dev, bgc, flags & BGPIOF_BIG_ENDIAN);
if (ret)
return ret;
@ -394,6 +394,11 @@ int bgpio_init(struct bgpio_chip *bgc, struct device *dev,
return ret;
bgc->data = bgc->read_reg(bgc->reg_dat);
if (bgc->gc.set == bgpio_set_set &&
!(flags & BGPIOF_UNREADABLE_REG_SET))
bgc->data = bgc->read_reg(bgc->reg_set);
if (bgc->reg_dir && !(flags & BGPIOF_UNREADABLE_REG_DIR))
bgc->dir = bgc->read_reg(bgc->reg_dir);
return ret;
}
@ -449,7 +454,7 @@ static int __devinit bgpio_pdev_probe(struct platform_device *pdev)
void __iomem *dirout;
void __iomem *dirin;
unsigned long sz;
bool be;
unsigned long flags = 0;
int err;
struct bgpio_chip *bgc;
struct bgpio_pdata *pdata = dev_get_platdata(dev);
@ -480,13 +485,14 @@ static int __devinit bgpio_pdev_probe(struct platform_device *pdev)
if (err)
return err;
be = !strcmp(platform_get_device_id(pdev)->name, "basic-mmio-gpio-be");
if (!strcmp(platform_get_device_id(pdev)->name, "basic-mmio-gpio-be"))
flags |= BGPIOF_BIG_ENDIAN;
bgc = devm_kzalloc(&pdev->dev, sizeof(*bgc), GFP_KERNEL);
if (!bgc)
return -ENOMEM;
err = bgpio_init(bgc, dev, sz, dat, set, clr, dirout, dirin, be);
err = bgpio_init(bgc, dev, sz, dat, set, clr, dirout, dirin, flags);
if (err)
return err;

91
drivers/gpio/gpio-langwell.c
View File

@ -36,6 +36,7 @@
#include <linux/gpio.h>
#include <linux/slab.h>
#include <linux/pm_runtime.h>
#include <linux/irqdomain.h>
/*
* Langwell chip has 64 pins and thus there are 2 32bit registers to control
@ -66,8 +67,8 @@ struct lnw_gpio {
struct gpio_chip chip;
void *reg_base;
spinlock_t lock;
unsigned irq_base;
struct pci_dev *pdev;
struct irq_domain *domain;
};
static void __iomem *gpio_reg(struct gpio_chip *chip, unsigned offset,
@ -176,13 +177,13 @@ static int lnw_gpio_direction_output(struct gpio_chip *chip,
static int lnw_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
{
struct lnw_gpio *lnw = container_of(chip, struct lnw_gpio, chip);
return lnw->irq_base + offset;
return irq_create_mapping(lnw->domain, offset);
}
static int lnw_irq_type(struct irq_data *d, unsigned type)
{
struct lnw_gpio *lnw = irq_data_get_irq_chip_data(d);
u32 gpio = d->irq - lnw->irq_base;
u32 gpio = irqd_to_hwirq(d);
unsigned long flags;
u32 value;
void __iomem *grer = gpio_reg(&lnw->chip, gpio, GRER);
@ -249,20 +250,55 @@ static void lnw_irq_handler(unsigned irq, struct irq_desc *desc)
/* check GPIO controller to check which pin triggered the interrupt */
for (base = 0; base < lnw->chip.ngpio; base += 32) {
gedr = gpio_reg(&lnw->chip, base, GEDR);
pending = readl(gedr);
while (pending) {
while ((pending = readl(gedr))) {
gpio = __ffs(pending);
mask = BIT(gpio);
pending &= ~mask;
/* Clear before handling so we can't lose an edge */
writel(mask, gedr);
generic_handle_irq(lnw->irq_base + base + gpio);
generic_handle_irq(irq_find_mapping(lnw->domain,
base + gpio));
}
}
chip->irq_eoi(data);
}
static void lnw_irq_init_hw(struct lnw_gpio *lnw)
{
void __iomem *reg;
unsigned base;
for (base = 0; base < lnw->chip.ngpio; base += 32) {
/* Clear the rising-edge detect register */
reg = gpio_reg(&lnw->chip, base, GRER);
writel(0, reg);
/* Clear the falling-edge detect register */
reg = gpio_reg(&lnw->chip, base, GFER);
writel(0, reg);
/* Clear the edge detect status register */
reg = gpio_reg(&lnw->chip, base, GEDR);
writel(~0, reg);
}
}
static int lnw_gpio_irq_map(struct irq_domain *d, unsigned int virq,
irq_hw_number_t hw)
{
struct lnw_gpio *lnw = d->host_data;
irq_set_chip_and_handler_name(virq, &lnw_irqchip, handle_simple_irq,
"demux");
irq_set_chip_data(virq, lnw);
irq_set_irq_type(virq, IRQ_TYPE_NONE);
return 0;
}
static const struct irq_domain_ops lnw_gpio_irq_ops = {
.map = lnw_gpio_irq_map,
.xlate = irq_domain_xlate_twocell,
};
#ifdef CONFIG_PM
static int lnw_gpio_runtime_resume(struct device *dev)
{
@ -300,23 +336,22 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
void *base;
int i;
resource_size_t start, len;
struct lnw_gpio *lnw;
u32 irq_base;
u32 gpio_base;
int retval = 0;
int ngpio = id->driver_data;
retval = pci_enable_device(pdev);
if (retval)
goto done;
return retval;
retval = pci_request_regions(pdev, "langwell_gpio");
if (retval) {
dev_err(&pdev->dev, "error requesting resources\n");
goto err2;
}
/* get the irq_base from bar1 */
/* get the gpio_base from bar1 */
start = pci_resource_start(pdev, 1);
len = pci_resource_len(pdev, 1);
base = ioremap_nocache(start, len);
@ -324,28 +359,32 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev,
dev_err(&pdev->dev, "error mapping bar1\n");
goto err3;
}
irq_base = *(u32 *)base;
gpio_base = *((u32 *)base + 1);
/* release the IO mapping, since we already get the info from bar1 */
iounmap(base);
/* get the register base from bar0 */
start = pci_resource_start(pdev, 0);
len = pci_resource_len(pdev, 0);
base = ioremap_nocache(start, len);
base = devm_ioremap_nocache(&pdev->dev, start, len);
if (!base) {
dev_err(&pdev->dev, "error mapping bar0\n");
retval = -EFAULT;
goto err3;
}
lnw = kzalloc(sizeof(struct lnw_gpio), GFP_KERNEL);
lnw = devm_kzalloc(&pdev->dev, sizeof(struct lnw_gpio), GFP_KERNEL);
if (!lnw) {
dev_err(&pdev->dev, "can't allocate langwell_gpio chip data\n");
retval = -ENOMEM;
goto err4;
goto err3;
}
lnw->domain = irq_domain_add_linear(pdev->dev.of_node, ngpio,
&lnw_gpio_irq_ops, lnw);
if (!lnw->domain)
goto err3;
lnw->reg_base = base;
lnw->irq_base = irq_base;
lnw->chip.label = dev_name(&pdev->dev);
lnw->chip.request = lnw_gpio_request;
lnw->chip.direction_input = lnw_gpio_direction_input;
@ -354,38 +393,32 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev,
lnw->chip.set = lnw_gpio_set;
lnw->chip.to_irq = lnw_gpio_to_irq;
lnw->chip.base = gpio_base;
lnw->chip.ngpio = id->driver_data;
lnw->chip.ngpio = ngpio;
lnw->chip.can_sleep = 0;
lnw->pdev = pdev;
pci_set_drvdata(pdev, lnw);
retval = gpiochip_add(&lnw->chip);
if (retval) {
dev_err(&pdev->dev, "langwell gpiochip_add error %d\n", retval);
goto err5;
goto err3;
}
lnw_irq_init_hw(lnw);
irq_set_handler_data(pdev->irq, lnw);
irq_set_chained_handler(pdev->irq, lnw_irq_handler);
for (i = 0; i < lnw->chip.ngpio; i++) {
irq_set_chip_and_handler_name(i + lnw->irq_base, &lnw_irqchip,
handle_simple_irq, "demux");
irq_set_chip_data(i + lnw->irq_base, lnw);
}
spin_lock_init(&lnw->lock);
pm_runtime_put_noidle(&pdev->dev);
pm_runtime_allow(&pdev->dev);
goto done;
err5:
kfree(lnw);
err4:
iounmap(base);
return 0;
err3:
pci_release_regions(pdev);
err2:
pci_disable_device(pdev);
done:
return retval;
}

52
drivers/gpio/gpio-lpc32xx.c
View File

@ -21,6 +21,9 @@
#include <linux/io.h>
#include <linux/errno.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <mach/hardware.h>
#include <mach/platform.h>
@ -454,10 +457,57 @@ static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = {
},
};
/* Empty now, can be removed later when mach-lpc32xx is finally switched over
* to DT support
*/
void __init lpc32xx_gpio_init(void)
{
}
static int lpc32xx_of_xlate(struct gpio_chip *gc,
const struct of_phandle_args *gpiospec, u32 *flags)
{
/* Is this the correct bank? */
u32 bank = gpiospec->args[0];
if ((bank > ARRAY_SIZE(lpc32xx_gpiochip) ||
(gc != &lpc32xx_gpiochip[bank].chip)))
return -EINVAL;
if (flags)
*flags = gpiospec->args[2];
return gpiospec->args[1];
}
static int __devinit lpc32xx_gpio_probe(struct platform_device *pdev)
{
int i;
for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++)
for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++) {
if (pdev->dev.of_node) {
lpc32xx_gpiochip[i].chip.of_xlate = lpc32xx_of_xlate;
lpc32xx_gpiochip[i].chip.of_gpio_n_cells = 3;
lpc32xx_gpiochip[i].chip.of_node = pdev->dev.of_node;
}
gpiochip_add(&lpc32xx_gpiochip[i].chip);
}
return 0;
}
#ifdef CONFIG_OF
static struct of_device_id lpc32xx_gpio_of_match[] __devinitdata = {
{ .compatible = "nxp,lpc3220-gpio", },
{ },
};
#endif
static struct platform_driver lpc32xx_gpio_driver = {
.driver = {
.name = "lpc32xx-gpio",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(lpc32xx_gpio_of_match),
},
.probe = lpc32xx_gpio_probe,
};
module_platform_driver(lpc32xx_gpio_driver);

2
drivers/gpio/gpio-mcp23s08.c
View File

@ -353,7 +353,7 @@ static void mcp23s08_dbg_show(struct seq_file *s, struct gpio_chip *chip)
chip->base + t, bank, t, label,
(mcp->cache[MCP_IODIR] & mask) ? "in " : "out",
(mcp->cache[MCP_GPIO] & mask) ? "hi" : "lo",
(mcp->cache[MCP_GPPU] & mask) ? " " : "up");
(mcp->cache[MCP_GPPU] & mask) ? "up" : " ");
/* NOTE: ignoring the irq-related registers */
seq_printf(s, "\n");
}

12
drivers/gpio/gpio-ml-ioh.c
View File

@ -611,17 +611,7 @@ static struct pci_driver ioh_gpio_driver = {
.resume = ioh_gpio_resume
};
static int __init ioh_gpio_pci_init(void)
{
return pci_register_driver(&ioh_gpio_driver);
}
module_init(ioh_gpio_pci_init);
static void __exit ioh_gpio_pci_exit(void)
{
pci_unregister_driver(&ioh_gpio_driver);
}
module_exit(ioh_gpio_pci_exit);
module_pci_driver(ioh_gpio_driver);
MODULE_DESCRIPTION("OKI SEMICONDUCTOR ML-IOH series GPIO Driver");
MODULE_LICENSE("GPL");

3
drivers/gpio/gpio-mpc8xxx.c
View File

@ -163,7 +163,8 @@ static void mpc8xxx_gpio_irq_cascade(unsigned int irq, struct irq_desc *desc)
if (mask)
generic_handle_irq(irq_linear_revmap(mpc8xxx_gc->irq,
32 - ffs(mask)));
chip->irq_eoi(&desc->irq_data);
if (chip->irq_eoi)
chip->irq_eoi(&desc->irq_data);
}
static void mpc8xxx_irq_unmask(struct irq_data *d)

339
drivers/gpio/gpio-msic.c Normal file
View File

@ -0,0 +1,339 @@
/*
* Intel Medfield MSIC GPIO driver>
* Copyright (c) 2011, Intel Corporation.
*
* Author: Mathias Nyman <mathias.nyman@linux.intel.com>
* Based on intel_pmic_gpio.c
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/mfd/intel_msic.h>
/* the offset for the mapping of global gpio pin to irq */
#define MSIC_GPIO_IRQ_OFFSET 0x100
#define MSIC_GPIO_DIR_IN 0
#define MSIC_GPIO_DIR_OUT BIT(5)
#define MSIC_GPIO_TRIG_FALL BIT(1)
#define MSIC_GPIO_TRIG_RISE BIT(2)
/* masks for msic gpio output GPIOxxxxCTLO registers */
#define MSIC_GPIO_DIR_MASK BIT(5)
#define MSIC_GPIO_DRV_MASK BIT(4)
#define MSIC_GPIO_REN_MASK BIT(3)
#define MSIC_GPIO_RVAL_MASK (BIT(2) | BIT(1))
#define MSIC_GPIO_DOUT_MASK BIT(0)
/* masks for msic gpio input GPIOxxxxCTLI registers */
#define MSIC_GPIO_GLBYP_MASK BIT(5)
#define MSIC_GPIO_DBNC_MASK (BIT(4) | BIT(3))
#define MSIC_GPIO_INTCNT_MASK (BIT(2) | BIT(1))
#define MSIC_GPIO_DIN_MASK BIT(0)
#define MSIC_NUM_GPIO 24
struct msic_gpio {
struct platform_device *pdev;
struct mutex buslock;
struct gpio_chip chip;
int irq;
unsigned irq_base;
unsigned long trig_change_mask;
unsigned trig_type;
};
/*
* MSIC has 24 gpios, 16 low voltage (1.2-1.8v) and 8 high voltage (3v).
* Both the high and low voltage gpios are divided in two banks.
* GPIOs are numbered with GPIO0LV0 as gpio_base in the following order:
* GPIO0LV0..GPIO0LV7: low voltage, bank 0, gpio_base
* GPIO1LV0..GPIO1LV7: low voltage, bank 1, gpio_base + 8
* GPIO0HV0..GPIO0HV3: high voltage, bank 0, gpio_base + 16
* GPIO1HV0..GPIO1HV3: high voltage, bank 1, gpio_base + 20
*/
static int msic_gpio_to_ireg(unsigned offset)
{
if (offset >= MSIC_NUM_GPIO)
return -EINVAL;
if (offset < 8)
return INTEL_MSIC_GPIO0LV0CTLI - offset;
if (offset < 16)
return INTEL_MSIC_GPIO1LV0CTLI - offset + 8;
if (offset < 20)
return INTEL_MSIC_GPIO0HV0CTLI - offset + 16;
return INTEL_MSIC_GPIO1HV0CTLI - offset + 20;
}
static int msic_gpio_to_oreg(unsigned offset)
{
if (offset >= MSIC_NUM_GPIO)
return -EINVAL;
if (offset < 8)
return INTEL_MSIC_GPIO0LV0CTLO - offset;
if (offset < 16)
return INTEL_MSIC_GPIO1LV0CTLO - offset + 8;
if (offset < 20)
return INTEL_MSIC_GPIO0HV0CTLO - offset + 16;
return INTEL_MSIC_GPIO1HV0CTLO + offset + 20;
}
static int msic_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
int reg;
reg = msic_gpio_to_oreg(offset);
if (reg < 0)
return reg;
return intel_msic_reg_update(reg, MSIC_GPIO_DIR_IN, MSIC_GPIO_DIR_MASK);
}
static int msic_gpio_direction_output(struct gpio_chip *chip,
unsigned offset, int value)
{
int reg;
unsigned mask;
value = (!!value) | MSIC_GPIO_DIR_OUT;
mask = MSIC_GPIO_DIR_MASK | MSIC_GPIO_DOUT_MASK;
reg = msic_gpio_to_oreg(offset);
if (reg < 0)
return reg;
return intel_msic_reg_update(reg, value, mask);
}
static int msic_gpio_get(struct gpio_chip *chip, unsigned offset)
{
u8 r;
int ret;
int reg;
reg = msic_gpio_to_ireg(offset);
if (reg < 0)
return reg;
ret = intel_msic_reg_read(reg, &r);
if (ret < 0)
return ret;
return r & MSIC_GPIO_DIN_MASK;
}
static void msic_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
int reg;
reg = msic_gpio_to_oreg(offset);
if (reg < 0)
return;
intel_msic_reg_update(reg, !!value , MSIC_GPIO_DOUT_MASK);
}
/*
* This is called from genirq with mg->buslock locked and
* irq_desc->lock held. We can not access the scu bus here, so we
* store the change and update in the bus_sync_unlock() function below
*/
static int msic_irq_type(struct irq_data *data, unsigned type)
{
struct msic_gpio *mg = irq_data_get_irq_chip_data(data);
u32 gpio = data->irq - mg->irq_base;
if (gpio >= mg->chip.ngpio)
return -EINVAL;
/* mark for which gpio the trigger changed, protected by buslock */
mg->trig_change_mask |= (1 << gpio);
mg->trig_type = type;
return 0;
}
static int msic_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
{
struct msic_gpio *mg = container_of(chip, struct msic_gpio, chip);
return mg->irq_base + offset;
}
static void msic_bus_lock(struct irq_data *data)
{
struct msic_gpio *mg = irq_data_get_irq_chip_data(data);
mutex_lock(&mg->buslock);
}
static void msic_bus_sync_unlock(struct irq_data *data)
{
struct msic_gpio *mg = irq_data_get_irq_chip_data(data);
int offset;
int reg;
u8 trig = 0;
/* We can only get one change at a time as the buslock covers the
entire transaction. The irq_desc->lock is dropped before we are
called but that is fine */
if (mg->trig_change_mask) {
offset = __ffs(mg->trig_change_mask);
reg = msic_gpio_to_ireg(offset);
if (reg < 0)
goto out;
if (mg->trig_type & IRQ_TYPE_EDGE_RISING)
trig |= MSIC_GPIO_TRIG_RISE;
if (mg->trig_type & IRQ_TYPE_EDGE_FALLING)
trig |= MSIC_GPIO_TRIG_FALL;
intel_msic_reg_update(reg, trig, MSIC_GPIO_INTCNT_MASK);
mg->trig_change_mask = 0;
}
out:
mutex_unlock(&mg->buslock);
}
/* Firmware does all the masking and unmasking for us, no masking here. */
static void msic_irq_unmask(struct irq_data *data) { }
static void msic_irq_mask(struct irq_data *data) { }
static struct irq_chip msic_irqchip = {
.name = "MSIC-GPIO",
.irq_mask = msic_irq_mask,
.irq_unmask = msic_irq_unmask,
.irq_set_type = msic_irq_type,
.irq_bus_lock = msic_bus_lock,
.irq_bus_sync_unlock = msic_bus_sync_unlock,
};
static void msic_gpio_irq_handler(unsigned irq, struct irq_desc *desc)
{
struct irq_data *data = irq_desc_get_irq_data(desc);
struct msic_gpio *mg = irq_data_get_irq_handler_data(data);
struct irq_chip *chip = irq_data_get_irq_chip(data);
struct intel_msic *msic = pdev_to_intel_msic(mg->pdev);
int i;
int bitnr;
u8 pin;
unsigned long pending = 0;
for (i = 0; i < (mg->chip.ngpio / BITS_PER_BYTE); i++) {
intel_msic_irq_read(msic, INTEL_MSIC_GPIO0LVIRQ + i, &pin);
pending = pin;
if (pending) {
for_each_set_bit(bitnr, &pending, BITS_PER_BYTE)
generic_handle_irq(mg->irq_base +
(i * BITS_PER_BYTE) + bitnr);
}
}
chip->irq_eoi(data);
}
static int __devinit platform_msic_gpio_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct intel_msic_gpio_pdata *pdata = dev->platform_data;
struct msic_gpio *mg;
int irq = platform_get_irq(pdev, 0);
int retval;
int i;
if (irq < 0) {
dev_err(dev, "no IRQ line\n");
return -EINVAL;
}
if (!pdata || !pdata->gpio_base) {
dev_err(dev, "incorrect or missing platform data\n");
return -EINVAL;
}
mg = kzalloc(sizeof(*mg), GFP_KERNEL);
if (!mg)
return -ENOMEM;
dev_set_drvdata(dev, mg);
mg->pdev = pdev;
mg->irq = irq;
mg->irq_base = pdata->gpio_base + MSIC_GPIO_IRQ_OFFSET;
mg->chip.label = "msic_gpio";
mg->chip.direction_input = msic_gpio_direction_input;
mg->chip.direction_output = msic_gpio_direction_output;
mg->chip.get = msic_gpio_get;
mg->chip.set = msic_gpio_set;
mg->chip.to_irq = msic_gpio_to_irq;
mg->chip.base = pdata->gpio_base;
mg->chip.ngpio = MSIC_NUM_GPIO;
mg->chip.can_sleep = 1;
mg->chip.dev = dev;
mutex_init(&mg->buslock);
retval = gpiochip_add(&mg->chip);
if (retval) {
dev_err(dev, "Adding MSIC gpio chip failed\n");
goto err;
}
for (i = 0; i < mg->chip.ngpio; i++) {
irq_set_chip_data(i + mg->irq_base, mg);
irq_set_chip_and_handler_name(i + mg->irq_base,
&msic_irqchip,
handle_simple_irq,
"demux");
}
irq_set_chained_handler(mg->irq, msic_gpio_irq_handler);
irq_set_handler_data(mg->irq, mg);
return 0;
err:
kfree(mg);
return retval;
}
static struct platform_driver platform_msic_gpio_driver = {
.driver = {
.name = "msic_gpio",
.owner = THIS_MODULE,
},
.probe = platform_msic_gpio_probe,
};
static int __init platform_msic_gpio_init(void)
{
return platform_driver_register(&platform_msic_gpio_driver);
}
subsys_initcall(platform_msic_gpio_init);
MODULE_AUTHOR("Mathias Nyman <mathias.nyman@linux.intel.com>");
MODULE_DESCRIPTION("Intel Medfield MSIC GPIO driver");
MODULE_LICENSE("GPL v2");

2
drivers/gpio/gpio-mxc.c
View File

@ -417,7 +417,7 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev)
err = bgpio_init(&port->bgc, &pdev->dev, 4,
port->base + GPIO_PSR,
port->base + GPIO_DR, NULL,
port->base + GPIO_GDIR, NULL, false);
port->base + GPIO_GDIR, NULL, 0);
if (err)
goto out_iounmap;

2
drivers/gpio/gpio-mxs.c
View File

@ -244,7 +244,7 @@ static int __devinit mxs_gpio_probe(struct platform_device *pdev)
err = bgpio_init(&port->bgc, &pdev->dev, 4,
port->base + PINCTRL_DIN(port->id),
port->base + PINCTRL_DOUT(port->id), NULL,
port->base + PINCTRL_DOE(port->id), NULL, false);
port->base + PINCTRL_DOE(port->id), NULL, 0);
if (err)
goto out_iounmap;

106
drivers/gpio/gpio-omap.c
View File

@ -57,14 +57,10 @@ struct gpio_bank {
u16 irq;
int irq_base;
struct irq_domain *domain;
u32 suspend_wakeup;
u32 saved_wakeup;
u32 non_wakeup_gpios;
u32 enabled_non_wakeup_gpios;
struct gpio_regs context;
u32 saved_datain;
u32 saved_fallingdetect;
u32 saved_risingdetect;
u32 level_mask;
u32 toggle_mask;
spinlock_t lock;
@ -516,11 +512,11 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
spin_lock_irqsave(&bank->lock, flags);
if (enable)
bank->suspend_wakeup |= gpio_bit;
bank->context.wake_en |= gpio_bit;
else
bank->suspend_wakeup &= ~gpio_bit;
bank->context.wake_en &= ~gpio_bit;
__raw_writel(bank->suspend_wakeup, bank->base + bank->regs->wkup_en);
__raw_writel(bank->context.wake_en, bank->base + bank->regs->wkup_en);
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
@ -640,7 +636,6 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
u32 isr;
unsigned int gpio_irq, gpio_index;
struct gpio_bank *bank;
u32 retrigger = 0;
int unmasked = 0;
struct irq_chip *chip = irq_desc_get_chip(desc);
@ -677,8 +672,6 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
chained_irq_exit(chip, desc);
}
isr |= retrigger;
retrigger = 0;
if (!isr)
break;
@ -789,8 +782,7 @@ static int omap_mpuio_suspend_noirq(struct device *dev)
unsigned long flags;
spin_lock_irqsave(&bank->lock, flags);
bank->saved_wakeup = __raw_readl(mask_reg);
__raw_writel(0xffff & ~bank->suspend_wakeup, mask_reg);
__raw_writel(0xffff & ~bank->context.wake_en, mask_reg);
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
@ -805,7 +797,7 @@ static int omap_mpuio_resume_noirq(struct device *dev)
unsigned long flags;
spin_lock_irqsave(&bank->lock, flags);
__raw_writel(bank->saved_wakeup, mask_reg);
__raw_writel(bank->context.wake_en, mask_reg);
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
@ -1152,54 +1144,6 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
#ifdef CONFIG_ARCH_OMAP2PLUS
#if defined(CONFIG_PM_SLEEP)
static int omap_gpio_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct gpio_bank *bank = platform_get_drvdata(pdev);
void __iomem *base = bank->base;
void __iomem *wakeup_enable;
unsigned long flags;
if (!bank->mod_usage || !bank->loses_context)
return 0;
if (!bank->regs->wkup_en || !bank->suspend_wakeup)
return 0;
wakeup_enable = bank->base + bank->regs->wkup_en;
spin_lock_irqsave(&bank->lock, flags);
bank->saved_wakeup = __raw_readl(wakeup_enable);
_gpio_rmw(base, bank->regs->wkup_en, 0xffffffff, 0);
_gpio_rmw(base, bank->regs->wkup_en, bank->suspend_wakeup, 1);
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
}
static int omap_gpio_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct gpio_bank *bank = platform_get_drvdata(pdev);
void __iomem *base = bank->base;
unsigned long flags;
if (!bank->mod_usage || !bank->loses_context)
return 0;
if (!bank->regs->wkup_en || !bank->saved_wakeup)
return 0;
spin_lock_irqsave(&bank->lock, flags);
_gpio_rmw(base, bank->regs->wkup_en, 0xffffffff, 0);
_gpio_rmw(base, bank->regs->wkup_en, bank->saved_wakeup, 1);
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
}
#endif /* CONFIG_PM_SLEEP */
#if defined(CONFIG_PM_RUNTIME)
static void omap_gpio_restore_context(struct gpio_bank *bank);
@ -1233,6 +1177,9 @@ static int omap_gpio_runtime_suspend(struct device *dev)
__raw_writel(wake_hi | bank->context.risingdetect,
bank->base + bank->regs->risingdetect);
if (!bank->enabled_non_wakeup_gpios)
goto update_gpio_context_count;
if (bank->power_mode != OFF_MODE) {
bank->power_mode = 0;
goto update_gpio_context_count;
@ -1244,11 +1191,9 @@ static int omap_gpio_runtime_suspend(struct device *dev)
*/
bank->saved_datain = __raw_readl(bank->base +
bank->regs->datain);
l1 = __raw_readl(bank->base + bank->regs->fallingdetect);
l2 = __raw_readl(bank->base + bank->regs->risingdetect);
l1 = bank->context.fallingdetect;
l2 = bank->context.risingdetect;
bank->saved_fallingdetect = l1;
bank->saved_risingdetect = l2;
l1 &= ~bank->enabled_non_wakeup_gpios;
l2 &= ~bank->enabled_non_wakeup_gpios;
@ -1290,16 +1235,10 @@ static int omap_gpio_runtime_resume(struct device *dev)
__raw_writel(bank->context.risingdetect,
bank->base + bank->regs->risingdetect);
if (!bank->workaround_enabled) {
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
}
if (bank->get_context_loss_count) {
context_lost_cnt_after =
bank->get_context_loss_count(bank->dev);
if (context_lost_cnt_after != bank->context_loss_count ||
!context_lost_cnt_after) {
if (context_lost_cnt_after != bank->context_loss_count) {
omap_gpio_restore_context(bank);
} else {
spin_unlock_irqrestore(&bank->lock, flags);
@ -1307,9 +1246,14 @@ static int omap_gpio_runtime_resume(struct device *dev)
}
}
__raw_writel(bank->saved_fallingdetect,
if (!bank->workaround_enabled) {
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
}
__raw_writel(bank->context.fallingdetect,
bank->base + bank->regs->fallingdetect);
__raw_writel(bank->saved_risingdetect,
__raw_writel(bank->context.risingdetect,
bank->base + bank->regs->risingdetect);
l = __raw_readl(bank->base + bank->regs->datain);
@ -1326,14 +1270,15 @@ static int omap_gpio_runtime_resume(struct device *dev)
* No need to generate IRQs for the rising edge for gpio IRQs
* configured with falling edge only; and vice versa.
*/
gen0 = l & bank->saved_fallingdetect;
gen0 = l & bank->context.fallingdetect;
gen0 &= bank->saved_datain;
gen1 = l & bank->saved_risingdetect;
gen1 = l & bank->context.risingdetect;
gen1 &= ~(bank->saved_datain);
/* FIXME: Consider GPIO IRQs with level detections properly! */
gen = l & (~(bank->saved_fallingdetect) & ~(bank->saved_risingdetect));
gen = l & (~(bank->context.fallingdetect) &
~(bank->context.risingdetect));
/* Consider all GPIO IRQs needed to be updated */
gen |= gen0 | gen1;
@ -1343,14 +1288,14 @@ static int omap_gpio_runtime_resume(struct device *dev)
old0 = __raw_readl(bank->base + bank->regs->leveldetect0);
old1 = __raw_readl(bank->base + bank->regs->leveldetect1);
if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
if (!bank->regs->irqstatus_raw0) {
__raw_writel(old0 | gen, bank->base +
bank->regs->leveldetect0);
__raw_writel(old1 | gen, bank->base +
bank->regs->leveldetect1);
}
if (cpu_is_omap44xx()) {
if (bank->regs->irqstatus_raw0) {
__raw_writel(old0 | l, bank->base +
bank->regs->leveldetect0);
__raw_writel(old1 | l, bank->base +
@ -1429,14 +1374,11 @@ static void omap_gpio_restore_context(struct gpio_bank *bank)
}
#endif /* CONFIG_PM_RUNTIME */
#else
#define omap_gpio_suspend NULL
#define omap_gpio_resume NULL
#define omap_gpio_runtime_suspend NULL
#define omap_gpio_runtime_resume NULL
#endif
static const struct dev_pm_ops gpio_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(omap_gpio_suspend, omap_gpio_resume)
SET_RUNTIME_PM_OPS(omap_gpio_runtime_suspend, omap_gpio_runtime_resume,
NULL)
};

43
drivers/gpio/gpio-pca953x.c
View File

@ -28,6 +28,8 @@
#define PCA953X_INVERT 2
#define PCA953X_DIRECTION 3
#define REG_ADDR_AI 0x80
#define PCA957X_IN 0
#define PCA957X_INVRT 1
#define PCA957X_BKEN 2
@ -63,15 +65,15 @@ static const struct i2c_device_id pca953x_id[] = {
{ "pca6107", 8 | PCA953X_TYPE | PCA_INT, },
{ "tca6408", 8 | PCA953X_TYPE | PCA_INT, },
{ "tca6416", 16 | PCA953X_TYPE | PCA_INT, },
/* NYET: { "tca6424", 24, }, */
{ "tca6424", 24 | PCA953X_TYPE | PCA_INT, },
{ }
};
MODULE_DEVICE_TABLE(i2c, pca953x_id);
struct pca953x_chip {
unsigned gpio_start;
uint16_t reg_output;
uint16_t reg_direction;
u32 reg_output;
u32 reg_direction;
struct mutex i2c_lock;
#ifdef CONFIG_GPIO_PCA953X_IRQ
@ -89,12 +91,20 @@ struct pca953x_chip {
int chip_type;
};
static int pca953x_write_reg(struct pca953x_chip *chip, int reg, uint16_t val)
static int pca953x_write_reg(struct pca953x_chip *chip, int reg, u32 val)
{
int ret = 0;
if (chip->gpio_chip.ngpio <= 8)
ret = i2c_smbus_write_byte_data(chip->client, reg, val);
else if (chip->gpio_chip.ngpio == 24) {
ret = i2c_smbus_write_word_data(chip->client,
(reg << 2) | REG_ADDR_AI,
val & 0xffff);
ret = i2c_smbus_write_byte_data(chip->client,
(reg << 2) + 2,
(val & 0xff0000) >> 16);
}
else {
switch (chip->chip_type) {
case PCA953X_TYPE:
@ -121,12 +131,17 @@ static int pca953x_write_reg(struct pca953x_chip *chip, int reg, uint16_t val)
return 0;
}
static int pca953x_read_reg(struct pca953x_chip *chip, int reg, uint16_t *val)
static int pca953x_read_reg(struct pca953x_chip *chip, int reg, u32 *val)
{
int ret;
if (chip->gpio_chip.ngpio <= 8)
ret = i2c_smbus_read_byte_data(chip->client, reg);
else if (chip->gpio_chip.ngpio == 24) {
ret = i2c_smbus_read_word_data(chip->client, reg << 2);
ret |= (i2c_smbus_read_byte_data(chip->client,
(reg << 2) + 2)<<16);
}
else
ret = i2c_smbus_read_word_data(chip->client, reg << 1);
@ -135,14 +150,14 @@ static int pca953x_read_reg(struct pca953x_chip *chip, int reg, uint16_t *val)
return ret;
}
*val = (uint16_t)ret;
*val = (u32)ret;
return 0;
}
static int pca953x_gpio_direction_input(struct gpio_chip *gc, unsigned off)
{
struct pca953x_chip *chip;
uint16_t reg_val;
uint reg_val;
int ret, offset = 0;
chip = container_of(gc, struct pca953x_chip, gpio_chip);
@ -173,7 +188,7 @@ static int pca953x_gpio_direction_output(struct gpio_chip *gc,
unsigned off, int val)
{
struct pca953x_chip *chip;
uint16_t reg_val;
uint reg_val;
int ret, offset = 0;
chip = container_of(gc, struct pca953x_chip, gpio_chip);
@ -223,7 +238,7 @@ exit:
static int pca953x_gpio_get_value(struct gpio_chip *gc, unsigned off)
{
struct pca953x_chip *chip;
uint16_t reg_val;
u32 reg_val;
int ret, offset = 0;
chip = container_of(gc, struct pca953x_chip, gpio_chip);
@ -253,7 +268,7 @@ static int pca953x_gpio_get_value(struct gpio_chip *gc, unsigned off)
static void pca953x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val)
{
struct pca953x_chip *chip;
uint16_t reg_val;
u32 reg_val;
int ret, offset = 0;
chip = container_of(gc, struct pca953x_chip, gpio_chip);
@ -386,7 +401,7 @@ static struct irq_chip pca953x_irq_chip = {
static uint16_t pca953x_irq_pending(struct pca953x_chip *chip)
{
uint16_t cur_stat;
u32 cur_stat;
uint16_t old_stat;
uint16_t pending;
uint16_t trigger;
@ -449,6 +464,7 @@ static int pca953x_irq_setup(struct pca953x_chip *chip,
{
struct i2c_client *client = chip->client;
int ret, offset = 0;
u32 temporary;
if (irq_base != -1
&& (id->driver_data & PCA_INT)) {
@ -462,7 +478,8 @@ static int pca953x_irq_setup(struct pca953x_chip *chip,
offset = PCA957X_IN;
break;
}
ret = pca953x_read_reg(chip, offset, &chip->irq_stat);
ret = pca953x_read_reg(chip, offset, &temporary);
chip->irq_stat = temporary;
if (ret)
goto out_failed;
@ -603,7 +620,7 @@ out:
static int __devinit device_pca957x_init(struct pca953x_chip *chip, int invert)
{
int ret;
uint16_t val = 0;
u32 val = 0;
/* Let every port in proper state, that could save power */
pca953x_write_reg(chip, PCA957X_PUPD, 0x0);

12
drivers/gpio/gpio-pch.c
View File

@ -538,17 +538,7 @@ static struct pci_driver pch_gpio_driver = {
.resume = pch_gpio_resume
};
static int __init pch_gpio_pci_init(void)
{
return pci_register_driver(&pch_gpio_driver);
}
module_init(pch_gpio_pci_init);
static void __exit pch_gpio_pci_exit(void)
{
pci_unregister_driver(&pch_gpio_driver);
}
module_exit(pch_gpio_pci_exit);
module_pci_driver(pch_gpio_driver);
MODULE_DESCRIPTION("PCH GPIO PCI Driver");
MODULE_LICENSE("GPL");

180
drivers/gpio/gpio-rc5t583.c Normal file
View File

@ -0,0 +1,180 @@
/*
* GPIO driver for RICOH583 power management chip.
*
* Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
* Author: Laxman dewangan <ldewangan@nvidia.com>
*
* Based on code
* Copyright (C) 2011 RICOH COMPANY,LTD
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/device.h>
#include <linux/gpio.h>
#include <linux/mfd/rc5t583.h>
struct rc5t583_gpio {
struct gpio_chip gpio_chip;
struct rc5t583 *rc5t583;
};
static inline struct rc5t583_gpio *to_rc5t583_gpio(struct gpio_chip *chip)
{
return container_of(chip, struct rc5t583_gpio, gpio_chip);
}
static int rc5t583_gpio_get(struct gpio_chip *gc, unsigned int offset)
{
struct rc5t583_gpio *rc5t583_gpio = to_rc5t583_gpio(gc);
struct device *parent = rc5t583_gpio->rc5t583->dev;
uint8_t val = 0;
int ret;
ret = rc5t583_read(parent, RC5T583_GPIO_MON_IOIN, &val);
if (ret < 0)
return ret;
return !!(val & BIT(offset));
}
static void rc5t583_gpio_set(struct gpio_chip *gc, unsigned int offset, int val)
{
struct rc5t583_gpio *rc5t583_gpio = to_rc5t583_gpio(gc);
struct device *parent = rc5t583_gpio->rc5t583->dev;
if (val)
rc5t583_set_bits(parent, RC5T583_GPIO_IOOUT, BIT(offset));
else
rc5t583_clear_bits(parent, RC5T583_GPIO_IOOUT, BIT(offset));
}
static int rc5t583_gpio_dir_input(struct gpio_chip *gc, unsigned int offset)
{
struct rc5t583_gpio *rc5t583_gpio = to_rc5t583_gpio(gc);
struct device *parent = rc5t583_gpio->rc5t583->dev;
int ret;
ret = rc5t583_clear_bits(parent, RC5T583_GPIO_IOSEL, BIT(offset));
if (ret < 0)
return ret;
/* Set pin to gpio mode */
return rc5t583_clear_bits(parent, RC5T583_GPIO_PGSEL, BIT(offset));
}
static int rc5t583_gpio_dir_output(struct gpio_chip *gc, unsigned offset,
int value)
{
struct rc5t583_gpio *rc5t583_gpio = to_rc5t583_gpio(gc);
struct device *parent = rc5t583_gpio->rc5t583->dev;
int ret;
rc5t583_gpio_set(gc, offset, value);
ret = rc5t583_set_bits(parent, RC5T583_GPIO_IOSEL, BIT(offset));
if (ret < 0)
return ret;
/* Set pin to gpio mode */
return rc5t583_clear_bits(parent, RC5T583_GPIO_PGSEL, BIT(offset));
}
static int rc5t583_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
{
struct rc5t583_gpio *rc5t583_gpio = to_rc5t583_gpio(gc);
if ((offset >= 0) && (offset < 8))
return rc5t583_gpio->rc5t583->irq_base +
RC5T583_IRQ_GPIO0 + offset;
return -EINVAL;
}
static void rc5t583_gpio_free(struct gpio_chip *gc, unsigned offset)
{
struct rc5t583_gpio *rc5t583_gpio = to_rc5t583_gpio(gc);
struct device *parent = rc5t583_gpio->rc5t583->dev;
rc5t583_set_bits(parent, RC5T583_GPIO_PGSEL, BIT(offset));
}
static int __devinit rc5t583_gpio_probe(struct platform_device *pdev)
{
struct rc5t583 *rc5t583 = dev_get_drvdata(pdev->dev.parent);
struct rc5t583_platform_data *pdata = dev_get_platdata(rc5t583->dev);
struct rc5t583_gpio *rc5t583_gpio;
rc5t583_gpio = devm_kzalloc(&pdev->dev, sizeof(*rc5t583_gpio),
GFP_KERNEL);
if (!rc5t583_gpio) {
dev_warn(&pdev->dev, "Mem allocation for rc5t583_gpio failed");
return -ENOMEM;
}
rc5t583_gpio->gpio_chip.label = "gpio-rc5t583",
rc5t583_gpio->gpio_chip.owner = THIS_MODULE,
rc5t583_gpio->gpio_chip.free = rc5t583_gpio_free,
rc5t583_gpio->gpio_chip.direction_input = rc5t583_gpio_dir_input,
rc5t583_gpio->gpio_chip.direction_output = rc5t583_gpio_dir_output,
rc5t583_gpio->gpio_chip.set = rc5t583_gpio_set,
rc5t583_gpio->gpio_chip.get = rc5t583_gpio_get,
rc5t583_gpio->gpio_chip.to_irq = rc5t583_gpio_to_irq,
rc5t583_gpio->gpio_chip.ngpio = RC5T583_MAX_GPIO,
rc5t583_gpio->gpio_chip.can_sleep = 1,
rc5t583_gpio->gpio_chip.dev = &pdev->dev;
rc5t583_gpio->gpio_chip.base = -1;
rc5t583_gpio->rc5t583 = rc5t583;
if (pdata && pdata->gpio_base)
rc5t583_gpio->gpio_chip.base = pdata->gpio_base;
platform_set_drvdata(pdev, rc5t583_gpio);
return gpiochip_add(&rc5t583_gpio->gpio_chip);
}
static int __devexit rc5t583_gpio_remove(struct platform_device *pdev)
{
struct rc5t583_gpio *rc5t583_gpio = platform_get_drvdata(pdev);
return gpiochip_remove(&rc5t583_gpio->gpio_chip);
}
static struct platform_driver rc5t583_gpio_driver = {
.driver = {
.name = "rc5t583-gpio",
.owner = THIS_MODULE,
},
.probe = rc5t583_gpio_probe,
.remove = __devexit_p(rc5t583_gpio_remove),
};
static int __init rc5t583_gpio_init(void)
{
return platform_driver_register(&rc5t583_gpio_driver);
}
subsys_initcall(rc5t583_gpio_init);
static void __exit rc5t583_gpio_exit(void)
{
platform_driver_unregister(&rc5t583_gpio_driver);
}
module_exit(rc5t583_gpio_exit);
MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
MODULE_DESCRIPTION("GPIO interface for RC5T583");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:rc5t583-gpio");

407
drivers/gpio/gpio-samsung.c
View File

@ -2716,14 +2716,224 @@ static __init void exynos_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
}
#endif /* defined(CONFIG_ARCH_EXYNOS) && defined(CONFIG_OF) */
static __init void exynos4_gpiolib_init(void)
{
#ifdef CONFIG_CPU_EXYNOS4210
struct samsung_gpio_chip *chip;
int i, nr_chips;
void __iomem *gpio_base1, *gpio_base2, *gpio_base3;
int group = 0;
void __iomem *gpx_base;
/* gpio part1 */
gpio_base1 = ioremap(EXYNOS4_PA_GPIO1, SZ_4K);
if (gpio_base1 == NULL) {
pr_err("unable to ioremap for gpio_base1\n");
goto err_ioremap1;
}
chip = exynos4_gpios_1;
nr_chips = ARRAY_SIZE(exynos4_gpios_1);
for (i = 0; i < nr_chips; i++, chip++) {
if (!chip->config) {
chip->config = &exynos_gpio_cfg;
chip->group = group++;
}
exynos_gpiolib_attach_ofnode(chip,
EXYNOS4_PA_GPIO1, i * 0x20);
}
samsung_gpiolib_add_4bit_chips(exynos4_gpios_1,
nr_chips, gpio_base1);
/* gpio part2 */
gpio_base2 = ioremap(EXYNOS4_PA_GPIO2, SZ_4K);
if (gpio_base2 == NULL) {
pr_err("unable to ioremap for gpio_base2\n");
goto err_ioremap2;
}
/* need to set base address for gpx */
chip = &exynos4_gpios_2[16];
gpx_base = gpio_base2 + 0xC00;
for (i = 0; i < 4; i++, chip++, gpx_base += 0x20)
chip->base = gpx_base;
chip = exynos4_gpios_2;
nr_chips = ARRAY_SIZE(exynos4_gpios_2);
for (i = 0; i < nr_chips; i++, chip++) {
if (!chip->config) {
chip->config = &exynos_gpio_cfg;
chip->group = group++;
}
exynos_gpiolib_attach_ofnode(chip,
EXYNOS4_PA_GPIO2, i * 0x20);
}
samsung_gpiolib_add_4bit_chips(exynos4_gpios_2,
nr_chips, gpio_base2);
/* gpio part3 */
gpio_base3 = ioremap(EXYNOS4_PA_GPIO3, SZ_256);
if (gpio_base3 == NULL) {
pr_err("unable to ioremap for gpio_base3\n");
goto err_ioremap3;
}
chip = exynos4_gpios_3;
nr_chips = ARRAY_SIZE(exynos4_gpios_3);
for (i = 0; i < nr_chips; i++, chip++) {
if (!chip->config) {
chip->config = &exynos_gpio_cfg;
chip->group = group++;
}
exynos_gpiolib_attach_ofnode(chip,
EXYNOS4_PA_GPIO3, i * 0x20);
}
samsung_gpiolib_add_4bit_chips(exynos4_gpios_3,
nr_chips, gpio_base3);
#if defined(CONFIG_CPU_EXYNOS4210) && defined(CONFIG_S5P_GPIO_INT)
s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS);
s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS);
#endif
return;
err_ioremap3:
iounmap(gpio_base2);
err_ioremap2:
iounmap(gpio_base1);
err_ioremap1:
return;
#endif /* CONFIG_CPU_EXYNOS4210 */
}
static __init void exynos5_gpiolib_init(void)
{
#ifdef CONFIG_SOC_EXYNOS5250
struct samsung_gpio_chip *chip;
int i, nr_chips;
void __iomem *gpio_base1, *gpio_base2, *gpio_base3, *gpio_base4;
int group = 0;
void __iomem *gpx_base;
/* gpio part1 */
gpio_base1 = ioremap(EXYNOS5_PA_GPIO1, SZ_4K);
if (gpio_base1 == NULL) {
pr_err("unable to ioremap for gpio_base1\n");
goto err_ioremap1;
}
/* need to set base address for gpx */
chip = &exynos5_gpios_1[20];
gpx_base = gpio_base1 + 0xC00;
for (i = 0; i < 4; i++, chip++, gpx_base += 0x20)
chip->base = gpx_base;
chip = exynos5_gpios_1;
nr_chips = ARRAY_SIZE(exynos5_gpios_1);
for (i = 0; i < nr_chips; i++, chip++) {
if (!chip->config) {
chip->config = &exynos_gpio_cfg;
chip->group = group++;
}
exynos_gpiolib_attach_ofnode(chip,
EXYNOS5_PA_GPIO1, i * 0x20);
}
samsung_gpiolib_add_4bit_chips(exynos5_gpios_1,
nr_chips, gpio_base1);
/* gpio part2 */
gpio_base2 = ioremap(EXYNOS5_PA_GPIO2, SZ_4K);
if (gpio_base2 == NULL) {
pr_err("unable to ioremap for gpio_base2\n");
goto err_ioremap2;
}
chip = exynos5_gpios_2;
nr_chips = ARRAY_SIZE(exynos5_gpios_2);
for (i = 0; i < nr_chips; i++, chip++) {
if (!chip->config) {
chip->config = &exynos_gpio_cfg;
chip->group = group++;
}
exynos_gpiolib_attach_ofnode(chip,
EXYNOS5_PA_GPIO2, i * 0x20);
}
samsung_gpiolib_add_4bit_chips(exynos5_gpios_2,
nr_chips, gpio_base2);
/* gpio part3 */
gpio_base3 = ioremap(EXYNOS5_PA_GPIO3, SZ_4K);
if (gpio_base3 == NULL) {
pr_err("unable to ioremap for gpio_base3\n");
goto err_ioremap3;
}
/* need to set base address for gpv */
exynos5_gpios_3[0].base = gpio_base3;
exynos5_gpios_3[1].base = gpio_base3 + 0x20;
exynos5_gpios_3[2].base = gpio_base3 + 0x60;
exynos5_gpios_3[3].base = gpio_base3 + 0x80;
exynos5_gpios_3[4].base = gpio_base3 + 0xC0;
chip = exynos5_gpios_3;
nr_chips = ARRAY_SIZE(exynos5_gpios_3);
for (i = 0; i < nr_chips; i++, chip++) {
if (!chip->config) {
chip->config = &exynos_gpio_cfg;
chip->group = group++;
}
exynos_gpiolib_attach_ofnode(chip,
EXYNOS5_PA_GPIO3, i * 0x20);
}
samsung_gpiolib_add_4bit_chips(exynos5_gpios_3,
nr_chips, gpio_base3);
/* gpio part4 */
gpio_base4 = ioremap(EXYNOS5_PA_GPIO4, SZ_4K);
if (gpio_base4 == NULL) {
pr_err("unable to ioremap for gpio_base4\n");
goto err_ioremap4;
}
chip = exynos5_gpios_4;
nr_chips = ARRAY_SIZE(exynos5_gpios_4);
for (i = 0; i < nr_chips; i++, chip++) {
if (!chip->config) {
chip->config = &exynos_gpio_cfg;
chip->group = group++;
}
exynos_gpiolib_attach_ofnode(chip,
EXYNOS5_PA_GPIO4, i * 0x20);
}
samsung_gpiolib_add_4bit_chips(exynos5_gpios_4,
nr_chips, gpio_base4);
return;
err_ioremap4:
iounmap(gpio_base3);
err_ioremap3:
iounmap(gpio_base2);
err_ioremap2:
iounmap(gpio_base1);
err_ioremap1:
return;
#endif /* CONFIG_SOC_EXYNOS5250 */
}
/* TODO: cleanup soc_is_* */
static __init int samsung_gpiolib_init(void)
{
struct samsung_gpio_chip *chip;
int i, nr_chips;
#if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS5250)
void __iomem *gpio_base1, *gpio_base2, *gpio_base3, *gpio_base4;
#endif
int group = 0;
samsung_gpiolib_set_cfg(samsung_gpio_cfgs, ARRAY_SIZE(samsung_gpio_cfgs));
@ -2789,202 +2999,15 @@ static __init int samsung_gpiolib_init(void)
s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
#endif
} else if (soc_is_exynos4210()) {
#ifdef CONFIG_CPU_EXYNOS4210
void __iomem *gpx_base;
/* gpio part1 */
gpio_base1 = ioremap(EXYNOS4_PA_GPIO1, SZ_4K);
if (gpio_base1 == NULL) {
pr_err("unable to ioremap for gpio_base1\n");
goto err_ioremap1;
}
chip = exynos4_gpios_1;
nr_chips = ARRAY_SIZE(exynos4_gpios_1);
for (i = 0; i < nr_chips; i++, chip++) {
if (!chip->config) {
chip->config = &exynos_gpio_cfg;
chip->group = group++;
}
exynos_gpiolib_attach_ofnode(chip,
EXYNOS4_PA_GPIO1, i * 0x20);
}
samsung_gpiolib_add_4bit_chips(exynos4_gpios_1,
nr_chips, gpio_base1);
/* gpio part2 */
gpio_base2 = ioremap(EXYNOS4_PA_GPIO2, SZ_4K);
if (gpio_base2 == NULL) {
pr_err("unable to ioremap for gpio_base2\n");
goto err_ioremap2;
}
/* need to set base address for gpx */
chip = &exynos4_gpios_2[16];
gpx_base = gpio_base2 + 0xC00;
for (i = 0; i < 4; i++, chip++, gpx_base += 0x20)
chip->base = gpx_base;
chip = exynos4_gpios_2;
nr_chips = ARRAY_SIZE(exynos4_gpios_2);
for (i = 0; i < nr_chips; i++, chip++) {
if (!chip->config) {
chip->config = &exynos_gpio_cfg;
chip->group = group++;
}
exynos_gpiolib_attach_ofnode(chip,
EXYNOS4_PA_GPIO2, i * 0x20);
}
samsung_gpiolib_add_4bit_chips(exynos4_gpios_2,
nr_chips, gpio_base2);
/* gpio part3 */
gpio_base3 = ioremap(EXYNOS4_PA_GPIO3, SZ_256);
if (gpio_base3 == NULL) {
pr_err("unable to ioremap for gpio_base3\n");
goto err_ioremap3;
}
chip = exynos4_gpios_3;
nr_chips = ARRAY_SIZE(exynos4_gpios_3);
for (i = 0; i < nr_chips; i++, chip++) {
if (!chip->config) {
chip->config = &exynos_gpio_cfg;
chip->group = group++;
}
exynos_gpiolib_attach_ofnode(chip,
EXYNOS4_PA_GPIO3, i * 0x20);
}
samsung_gpiolib_add_4bit_chips(exynos4_gpios_3,
nr_chips, gpio_base3);
#if defined(CONFIG_CPU_EXYNOS4210) && defined(CONFIG_S5P_GPIO_INT)
s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS);
s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS);
#endif
#endif /* CONFIG_CPU_EXYNOS4210 */
exynos4_gpiolib_init();
} else if (soc_is_exynos5250()) {
#ifdef CONFIG_SOC_EXYNOS5250
void __iomem *gpx_base;
/* gpio part1 */
gpio_base1 = ioremap(EXYNOS5_PA_GPIO1, SZ_4K);
if (gpio_base1 == NULL) {
pr_err("unable to ioremap for gpio_base1\n");
goto err_ioremap1;
}
/* need to set base address for gpx */
chip = &exynos5_gpios_1[20];
gpx_base = gpio_base1 + 0xC00;
for (i = 0; i < 4; i++, chip++, gpx_base += 0x20)
chip->base = gpx_base;
chip = exynos5_gpios_1;
nr_chips = ARRAY_SIZE(exynos5_gpios_1);
for (i = 0; i < nr_chips; i++, chip++) {
if (!chip->config) {
chip->config = &exynos_gpio_cfg;
chip->group = group++;
}
exynos_gpiolib_attach_ofnode(chip,
EXYNOS5_PA_GPIO1, i * 0x20);
}
samsung_gpiolib_add_4bit_chips(exynos5_gpios_1,
nr_chips, gpio_base1);
/* gpio part2 */
gpio_base2 = ioremap(EXYNOS5_PA_GPIO2, SZ_4K);
if (gpio_base2 == NULL) {
pr_err("unable to ioremap for gpio_base2\n");
goto err_ioremap2;
}
chip = exynos5_gpios_2;
nr_chips = ARRAY_SIZE(exynos5_gpios_2);
for (i = 0; i < nr_chips; i++, chip++) {
if (!chip->config) {
chip->config = &exynos_gpio_cfg;
chip->group = group++;
}
exynos_gpiolib_attach_ofnode(chip,
EXYNOS5_PA_GPIO2, i * 0x20);
}
samsung_gpiolib_add_4bit_chips(exynos5_gpios_2,
nr_chips, gpio_base2);
/* gpio part3 */
gpio_base3 = ioremap(EXYNOS5_PA_GPIO3, SZ_4K);
if (gpio_base3 == NULL) {
pr_err("unable to ioremap for gpio_base3\n");
goto err_ioremap3;
}
/* need to set base address for gpv */
exynos5_gpios_3[0].base = gpio_base3;
exynos5_gpios_3[1].base = gpio_base3 + 0x20;
exynos5_gpios_3[2].base = gpio_base3 + 0x60;
exynos5_gpios_3[3].base = gpio_base3 + 0x80;
exynos5_gpios_3[4].base = gpio_base3 + 0xC0;
chip = exynos5_gpios_3;
nr_chips = ARRAY_SIZE(exynos5_gpios_3);
for (i = 0; i < nr_chips; i++, chip++) {
if (!chip->config) {
chip->config = &exynos_gpio_cfg;
chip->group = group++;
}
exynos_gpiolib_attach_ofnode(chip,
EXYNOS5_PA_GPIO3, i * 0x20);
}
samsung_gpiolib_add_4bit_chips(exynos5_gpios_3,
nr_chips, gpio_base3);
/* gpio part4 */
gpio_base4 = ioremap(EXYNOS5_PA_GPIO4, SZ_4K);
if (gpio_base4 == NULL) {
pr_err("unable to ioremap for gpio_base4\n");
goto err_ioremap4;
}
chip = exynos5_gpios_4;
nr_chips = ARRAY_SIZE(exynos5_gpios_4);
for (i = 0; i < nr_chips; i++, chip++) {
if (!chip->config) {
chip->config = &exynos_gpio_cfg;
chip->group = group++;
}
exynos_gpiolib_attach_ofnode(chip,
EXYNOS5_PA_GPIO4, i * 0x20);
}
samsung_gpiolib_add_4bit_chips(exynos5_gpios_4,
nr_chips, gpio_base4);
#endif /* CONFIG_SOC_EXYNOS5250 */
exynos5_gpiolib_init();
} else {
WARN(1, "Unknown SoC in gpio-samsung, no GPIOs added\n");
return -ENODEV;
}
return 0;
#if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS5250)
err_ioremap4:
iounmap(gpio_base3);
err_ioremap3:
iounmap(gpio_base2);
err_ioremap2:
iounmap(gpio_base1);
err_ioremap1:
return -ENOMEM;
#endif
}
core_initcall(samsung_gpiolib_init);

14
drivers/gpio/gpio-sodaville.c
View File

@ -224,7 +224,7 @@ static int __devinit sdv_gpio_probe(struct pci_dev *pdev,
ret = bgpio_init(&sd->bgpio, &pdev->dev, 4,
sd->gpio_pub_base + GPINR, sd->gpio_pub_base + GPOUTR,
NULL, sd->gpio_pub_base + GPOER, NULL, false);
NULL, sd->gpio_pub_base + GPOER, NULL, 0);
if (ret)
goto unmap;
sd->bgpio.gc.ngpio = SDV_NUM_PUB_GPIOS;
@ -282,17 +282,7 @@ static struct pci_driver sdv_gpio_driver = {
.remove = sdv_gpio_remove,
};
static int __init sdv_gpio_init(void)
{
return pci_register_driver(&sdv_gpio_driver);
}
module_init(sdv_gpio_init);
static void __exit sdv_gpio_exit(void)
{
pci_unregister_driver(&sdv_gpio_driver);
}
module_exit(sdv_gpio_exit);
module_pci_driver(sdv_gpio_driver);
MODULE_AUTHOR("Hans J. Koch <hjk@linutronix.de>");
MODULE_DESCRIPTION("GPIO interface for Intel Sodaville SoCs");

84
drivers/of/gpio.c → drivers/gpio/gpiolib-of.c
View File

@ -15,11 +15,39 @@
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_gpio.h>
#include <linux/slab.h>
/* Private data structure for of_gpiochip_is_match */
struct gg_data {
enum of_gpio_flags *flags;
struct of_phandle_args gpiospec;
int out_gpio;
};
/* Private function for resolving node pointer to gpio_chip */
static int of_gpiochip_find_and_xlate(struct gpio_chip *gc, void *data)
{
struct gg_data *gg_data = data;
int ret;
if ((gc->of_node != gg_data->gpiospec.np) ||
(gc->of_gpio_n_cells != gg_data->gpiospec.args_count) ||
(!gc->of_xlate))
return false;
ret = gc->of_xlate(gc, &gg_data->gpiospec, gg_data->flags);
if (ret < 0)
return false;
gg_data->out_gpio = ret + gc->base;
return true;
}
/**
* of_get_named_gpio_flags() - Get a GPIO number and flags to use with GPIO API
* @np: device node to get GPIO from
@ -34,46 +62,25 @@
int of_get_named_gpio_flags(struct device_node *np, const char *propname,
int index, enum of_gpio_flags *flags)
{
struct gg_data gg_data = { .flags = flags, .out_gpio = -ENODEV };
int ret;
struct gpio_chip *gc;
struct of_phandle_args gpiospec;
ret = of_parse_phandle_with_args(np, propname, "#gpio-cells", index,
&gpiospec);
if (ret) {
pr_debug("%s: can't parse gpios property\n", __func__);
goto err0;
}
gc = of_node_to_gpiochip(gpiospec.np);
if (!gc) {
pr_debug("%s: gpio controller %s isn't registered\n",
np->full_name, gpiospec.np->full_name);
ret = -ENODEV;
goto err1;
}
if (gpiospec.args_count != gc->of_gpio_n_cells) {
pr_debug("%s: wrong #gpio-cells for %s\n",
np->full_name, gpiospec.np->full_name);
ret = -EINVAL;
goto err1;
}
/* .xlate might decide to not fill in the flags, so clear it. */
/* .of_xlate might decide to not fill in the flags, so clear it. */
if (flags)
*flags = 0;
ret = gc->of_xlate(gc, &gpiospec, flags);
if (ret < 0)
goto err1;
ret = of_parse_phandle_with_args(np, propname, "#gpio-cells", index,
&gg_data.gpiospec);
if (ret) {
pr_debug("%s: can't parse gpios property\n", __func__);
return -EINVAL;
}
ret += gc->base;
err1:
of_node_put(gpiospec.np);
err0:
gpiochip_find(&gg_data, of_gpiochip_find_and_xlate);
of_node_put(gg_data.gpiospec.np);
pr_debug("%s exited with status %d\n", __func__, ret);
return ret;
return gg_data.out_gpio;
}
EXPORT_SYMBOL(of_get_named_gpio_flags);
@ -227,14 +234,3 @@ void of_gpiochip_remove(struct gpio_chip *chip)
if (chip->of_node)
of_node_put(chip->of_node);
}
/* Private function for resolving node pointer to gpio_chip */
static int of_gpiochip_is_match(struct gpio_chip *chip, const void *data)
{
return chip->of_node == data;
}
struct gpio_chip *of_node_to_gpiochip(struct device_node *np)
{
return gpiochip_find(np, of_gpiochip_is_match);
}

18
drivers/gpio/gpiolib.c
View File

@ -1093,7 +1093,7 @@ unlock:
if (status)
goto fail;
pr_info("gpiochip_add: registered GPIOs %d to %d on device: %s\n",
pr_debug("gpiochip_add: registered GPIOs %d to %d on device: %s\n",
chip->base, chip->base + chip->ngpio - 1,
chip->label ? : "generic");
@ -1154,9 +1154,9 @@ EXPORT_SYMBOL_GPL(gpiochip_remove);
* non-zero, this function will return to the caller and not iterate over any
* more gpio_chips.
*/
struct gpio_chip *gpiochip_find(const void *data,
struct gpio_chip *gpiochip_find(void *data,
int (*match)(struct gpio_chip *chip,
const void *data))
void *data))
{
struct gpio_chip *chip = NULL;
unsigned long flags;
@ -1302,8 +1302,18 @@ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
(flags & GPIOF_INIT_HIGH) ? 1 : 0);
if (err)
gpio_free(gpio);
goto free_gpio;
if (flags & GPIOF_EXPORT) {
err = gpio_export(gpio, flags & GPIOF_EXPORT_CHANGEABLE);
if (err)
goto free_gpio;
}
return 0;
free_gpio:
gpio_free(gpio);
return err;
}
EXPORT_SYMBOL_GPL(gpio_request_one);

6
drivers/of/Kconfig
View File

@ -51,12 +51,6 @@ config OF_IRQ
config OF_DEVICE
def_bool y
config OF_GPIO
def_bool y
depends on GPIOLIB && !SPARC
help
OpenFirmware GPIO accessors
config OF_I2C
def_tristate I2C
depends on I2C && !SPARC

1
drivers/of/Makefile
View File

@ -4,7 +4,6 @@ obj-$(CONFIG_OF_PROMTREE) += pdt.o
obj-$(CONFIG_OF_ADDRESS) += address.o
obj-$(CONFIG_OF_IRQ) += irq.o
obj-$(CONFIG_OF_DEVICE) += device.o platform.o
obj-$(CONFIG_OF_GPIO) += gpio.o
obj-$(CONFIG_OF_I2C) += of_i2c.o
obj-$(CONFIG_OF_NET) += of_net.o
obj-$(CONFIG_OF_SELFTEST) += selftest.o

6
include/asm-generic/gpio.h
View File

@ -142,9 +142,9 @@ extern int __must_check gpiochip_reserve(int start, int ngpio);
/* add/remove chips */
extern int gpiochip_add(struct gpio_chip *chip);
extern int __must_check gpiochip_remove(struct gpio_chip *chip);
extern struct gpio_chip *gpiochip_find(const void *data,
extern struct gpio_chip *gpiochip_find(void *data,
int (*match)(struct gpio_chip *chip,
const void *data));
void *data));
/* Always use the library code for GPIO management calls,
@ -179,6 +179,8 @@ extern void gpio_free_array(const struct gpio *array, size_t num);
/* bindings for managed devices that want to request gpios */
int devm_gpio_request(struct device *dev, unsigned gpio, const char *label);
int devm_gpio_request_one(struct device *dev, unsigned gpio,
unsigned long flags, const char *label);
void devm_gpio_free(struct device *dev, unsigned int gpio);
#ifdef CONFIG_GPIO_SYSFS

6
include/linux/basic_mmio_gpio.h
View File

@ -67,6 +67,10 @@ int bgpio_remove(struct bgpio_chip *bgc);
int bgpio_init(struct bgpio_chip *bgc, struct device *dev,
unsigned long sz, void __iomem *dat, void __iomem *set,
void __iomem *clr, void __iomem *dirout, void __iomem *dirin,
bool big_endian);
unsigned long flags);
#define BGPIOF_BIG_ENDIAN BIT(0)
#define BGPIOF_UNREADABLE_REG_SET BIT(1) /* reg_set is unreadable */
#define BGPIOF_UNREADABLE_REG_DIR BIT(2) /* reg_dir is unreadable */
#endif /* __BASIC_MMIO_GPIO_H */

59
include/linux/gpio.h
View File

@ -1,6 +1,8 @@
#ifndef __LINUX_GPIO_H
#define __LINUX_GPIO_H
#include <linux/errno.h>
/* see Documentation/gpio.txt */
/* make these flag values available regardless of GPIO kconfig options */
@ -20,6 +22,11 @@
/* Gpio pin is open source */
#define GPIOF_OPEN_SOURCE (1 << 3)
#define GPIOF_EXPORT (1 << 2)
#define GPIOF_EXPORT_CHANGEABLE (1 << 3)
#define GPIOF_EXPORT_DIR_FIXED (GPIOF_EXPORT)
#define GPIOF_EXPORT_DIR_CHANGEABLE (GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE)
/**
* struct gpio - a structure describing a GPIO with configuration
* @gpio: the GPIO number
@ -33,7 +40,39 @@ struct gpio {
};
#ifdef CONFIG_GENERIC_GPIO
#ifdef CONFIG_ARCH_HAVE_CUSTOM_GPIO_H
#include <asm/gpio.h>
#else
#include <asm-generic/gpio.h>
static inline int gpio_get_value(unsigned int gpio)
{
return __gpio_get_value(gpio);
}
static inline void gpio_set_value(unsigned int gpio, int value)
{
__gpio_set_value(gpio, value);
}
static inline int gpio_cansleep(unsigned int gpio)
{
return __gpio_cansleep(gpio);
}
static inline int gpio_to_irq(unsigned int gpio)
{
return __gpio_to_irq(gpio);
}
static inline int irq_to_gpio(unsigned int irq)
{
return -EINVAL;
}
#endif
#else
@ -55,12 +94,24 @@ static inline int gpio_request(unsigned gpio, const char *label)
return -ENOSYS;
}
static inline int devm_gpio_request(struct device *dev, unsigned gpio,
const char *label)
{
return -ENOSYS;
}
static inline int gpio_request_one(unsigned gpio,
unsigned long flags, const char *label)
{
return -ENOSYS;
}
static inline int devm_gpio_request_one(struct device *dev, unsigned gpio,
unsigned long flags, const char *label)
{
return -ENOSYS;
}
static inline int gpio_request_array(const struct gpio *array, size_t num)
{
return -ENOSYS;
@ -74,6 +125,14 @@ static inline void gpio_free(unsigned gpio)
WARN_ON(1);
}
static inline void devm_gpio_free(struct device *dev, unsigned gpio)
{
might_sleep();
/* GPIO can never have been requested */
WARN_ON(1);
}
static inline void gpio_free_array(const struct gpio *array, size_t num)
{
might_sleep();

2
include/linux/mfd/rc5t583.h
View File

@ -292,6 +292,7 @@ struct rc5t583 {
* rc5t583_platform_data: Platform data for ricoh rc5t583 pmu.
* The board specific data is provided through this structure.
* @irq_base: Irq base number on which this device registers their interrupts.
* @gpio_base: GPIO base from which gpio of this device will start.
* @enable_shutdown: Enable shutdown through the input pin "shutdown".
* @regulator_deepsleep_slot: The slot number on which device goes to sleep
* in device sleep mode.
@ -303,6 +304,7 @@ struct rc5t583 {
struct rc5t583_platform_data {
int irq_base;
int gpio_base;
bool enable_shutdown;
int regulator_deepsleep_slot[RC5T583_REGULATOR_MAX];
unsigned long regulator_ext_pwr_control[RC5T583_REGULATOR_MAX];

1
include/linux/of_gpio.h
View File

@ -58,7 +58,6 @@ extern int of_mm_gpiochip_add(struct device_node *np,
extern void of_gpiochip_add(struct gpio_chip *gc);
extern void of_gpiochip_remove(struct gpio_chip *gc);
extern struct gpio_chip *of_node_to_gpiochip(struct device_node *np);
extern int of_gpio_simple_xlate(struct gpio_chip *gc,
const struct of_phandle_args *gpiospec,
u32 *flags);