From 5599258b67f3af1ea764d983322d8b8d0199e2e5 Mon Sep 17 00:00:00 2001 From: Vadim Yanitskiy Date: Tue, 1 Dec 2020 13:42:56 +0100 Subject: firmware/layer1: invalidate hard-coded Measurement results This is what the L1 sends to the network before the first SACCH block is received from the higher layers. The indicated values are of course invalid because they're hard-coded. According to 3GPP TS 44.018, table 10.5.2.20.1: 0 The measurement results are valid 1 The measurement results are not valid Change-Id: I136307baef3fa2ddd1d5cec2a7f8c9e6d4602499 Related: I7da767e146aec7cef1de71e4d735d6a02b6c5642 Related: SYS#4918 --- src/target/firmware/layer1/prim_utils.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/src/target/firmware/layer1/prim_utils.c b/src/target/firmware/layer1/prim_utils.c index 9c58d15e..7beab5fe 100644 --- a/src/target/firmware/layer1/prim_utils.c +++ b/src/target/firmware/layer1/prim_utils.c @@ -51,13 +51,13 @@ static uint8_t ubMeas[23] = { * .0.. .... = DTX-USED: DTX was not used * ..11 0110 = RXLEV-FULL-SERVING-CELL: -57 <= x < -56 dBm (54) * 0... .... = 3G-BA-USED: 0 - * .0.. .... = MEAS-VALID: The measurement results are valid + * .1.. .... = MEAS-VALID: The measurement results are not valid * ..11 0110 = RXLEV-SUB-SERVING-CELL: -57 <= x < -56 dBm (54) * 0... .... = SI23_BA_USED: 0 * .000 .... = RXQUAL-FULL-SERVING-CELL: BER < 0.2%, Mean value 0.14% (0) * .... 000. = RXQUAL-SUB-SERVING-CELL: BER < 0.2%, Mean value 0.14% (0) * .... ...1 11.. .... = NO-NCELL-M: Neighbour cell information not available */ - 0x36, 0x36, 0x01, 0xc0, 0x00, 0x00, 0x00, 0x00, + 0x36, 0x76, 0x01, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, }; -- cgit v1.2.3