summaryrefslogtreecommitdiffstats
path: root/src
AgeCommit message (Collapse)AuthorFilesLines
2013-01-10mobile: Fixed CLIR invokation / suppressionAndreas Eversberg1-2/+4
If "clip" is given at vty, CLIR must be suppressed, which results in presentation of caller ID digits, even if suppressed by network. If "clir" is given at vty, CLIR must be invoked, which results in restriction of caller ID digits, even if not suppressed by network. Note: This only work for outgoing caller ID. Incomming caller ID restriction cannot be suppressed.
2013-01-08misc: Fix typosDario Lombardo2-2/+2
2013-01-08mobile: Fixed ignoring of MDL-ERROR-INDAndreas Eversberg1-0/+1
Some MDL-ERROR causes must not lead to link failure. The missing "return 0" causes all errors to be ignored which are not listed inside switch/case statement.
2013-01-08fix: Use only single CCCH block to determine path lossAndreas Eversberg1-0/+7
The downlink singalling failure counter DSC is decremented by 4 in case of unsuccessfull decoding of CCCH block and incremented by 1 in case of successfull decoding of CCCH block. The initial and maximum value of 90 requires to check the signal only once per 51 multiframe. If DRX would be supported, only a subset of 51 multiframes are received, so the initial / maximum value of 90 must be reduced accordingly.
2013-01-07mobile: Allow test card to be maked as already attachedAndreas Eversberg5-16/+73
This way it is possible to use test card without making attachment to the network, if the LAI matches. It can be used to do faster testing.
2013-01-07mobile: Improved exit of mobile process, reset phoneAndreas Eversberg3-19/+62
If mobile phone has started, it is reset after shutdown. This ensures that the phone is not transmitting anymore, especially while shutting down in dedicated mode. Using CTRL+c: The first signal causes initiating of shutdown with detach procedure. The second signal causes initiating of shutdown without detach procedure. The third signal will exit process immidiately. (in case it hangs) Using CTRL+z: The first signal causes initiating of shutdown without detach procedure. A subsequent CTRL+c would exit process immidiately.
2013-01-05fw: pirelli_dpl10: initialize address line 22 for flash accessSteve Markgraf1-0/+6
Signed-off-by: Steve Markgraf <steve@steve-m.de>
2013-01-05fw: apps/loader: initialize framebuffer and show somethingSteve Markgraf1-0/+23
Since we now initialize the display for all apps, it otherwise just shows the last content of the display ram, which is weird. Signed-off-by: Steve Markgraf <steve@steve-m.de>
2013-01-05fw: keypad driver overhaul, support for different keymapsSteve Markgraf10-80/+90
Now the Pirelli DP-L10 keymap is supported. Signed-off-by: Steve Markgraf <steve@steve-m.de>
2013-01-05fw: introduce per-board uart mappingSteve Markgraf17-65/+123
Signed-off-by: Steve Markgraf <steve@steve-m.de>
2013-01-05fw: introduce with_irq parameter for board_init()Steve Markgraf15-64/+53
So far the loader-app used to do the init on its own, which brought a lot of problems for board- specific initialization. Signed-off-by: Steve Markgraf <steve@steve-m.de>
2013-01-05osmocon: make romloader output much less verboseSteve Markgraf1-20/+5
Most of the output was only for debug purposes anyway. Signed-off-by: Steve Markgraf <steve@steve-m.de>
2013-01-02target: Add support for IQ swap when requiredSylvain Munaut12-8/+82
Operation in GSM850 band requires IQ swap because of the offset PLL used in the TRF causing spectrum reversal. Thanks to Dieter Spaar for noticing the issue and the original patch Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-01-02fw: Fix link scripts to represent reality more accuratelySylvain Munaut2-17/+16
Previously they were hacks to allow build ... Not needed now. Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-01-02fw/build: Allow applications to filter environmentsSylvain Munaut3-1/+47
We use an external python script to solve which env to build, to mix board and app env list Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-01-02fw/build: Add ENV_ APP_ BOARD_ prefix to variables to cleanup namespaceSylvain Munaut6-49/+49
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-01-02fw/build: Group env / boards / applicationsSylvain Munaut1-42/+66
No functional changes, just moving things around Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-01-02fw/build: The app/board/env combo macro need to be lastSylvain Munaut1-5/+5
The app template will create the list of app specific objs so that needs to be before Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-01-02fw/build: Include app / board / env specific objs during buildSylvain Munaut1-2/+2
Just put the env with the rest and not manifest and also allow app additional files Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-01-02fw/build: Add a silent rule for the 'size' call as wellSylvain Munaut1-1/+2
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-01-02mobile/gsm411: Fix printf format warningSylvain Munaut1-1/+1
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-01-02mobile/gsm411: Adapt to new libosmocore API for SMC/SMR by adding idSylvain Munaut1-8/+8
Here we just use the transaction ID Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-01-02build: Use the system wide libosmocore for host applicationsSylvain Munaut1-31/+9
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-01-02host/cell_log: Prevent buffer overflow when displaying arfcn rangeSylvain Munaut1-5/+4
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-01-02host/l23: Added custom frequecy range to cell_log.Dario Lombardo2-5/+59
Written-by: Dario Lombardo <lomato@libero.it> Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-01-02l23 sysinfo: defer SI4 CBCH mobile allocation until SI1 is receivedAlex Badea1-0/+1
When parsing SI4, there's a check and a log message saying that CBCH MA is ignored until SI1 is received. Then the MA is decoded anyway -- incorrectly -- such that it remains incorrect even after receiving the next SI1. Fix that with an "else". Signed-off-by: Alex Badea <vamposdecampos@gmail.com> Signed-off-by: Andreas Eversberg <jolly@eversberg.eu>
2012-12-29Fix: Check if cell is barred, before performing location updatingAndreas Eversberg1-0/+9
If not checked, the MM process will crash, due to an endless loop of trying to do location updating to barred cell.
2012-11-22Rename various "rxlev" variable to "rxlev_dbm" and correct their signessAndreas Eversberg10-47/+47
All levels in range of 0..63 are now uint8_t and use "rxlev" as variable name. All levels in range of -110..-47 are now int8_t and use "rxlev_dbm" as variable name.
2012-11-22fix previous commit: use dbm2rxlev()Harald Welte2-2/+2
As andreas points out, there are structure members that are called 'rxlev' but which don't use the scaling (0..63) of the GSM specs, but which are already a signed type and in dBm. So they need to be converted. TODO: Rename those structure members to rxlev_dbm or something that explicitly states it is _not_ an 'RXLEV' value in terms of GSM.
2012-11-20Tell L1CTL_FBSB_REQ the expected received signal levelHarald Welte8-8/+13
As Dieter points out, this drastically improves the resiliance to high receive levels on the C155. We cannot blindly assume a received signal level of -85 dBm if the BTS is 2m away and we actually receive -40 dBm. This patch extends the L1CTL_FBSB_REQ data structure in layer 1 with the respective field, as well as the l1ctl_tx_fbsb_req() API function called from the various layer23 apps. "mobile" and "bcch_scan" already did a PM request and thus know the expected signal power. "ccch_scan" and "cbch_sniff" apparently don't do, so the -85 dBm constant is now hardcoded into the host-side source code there, and should probably be fixed in a follow-up patch.
2012-11-16Fix wrong print of scan freq when using gsm_print_arfcn twice for the same ↵Pavel Baturko1-4/+12
log message
2012-11-15Fix: Correctly convert ARFCN to index.Joshua Lackey1-1/+4
If you enable PCS, you'll never make it out of power-measurement without this patch.
2012-11-14Merge commit '5905d5be60249b2d9ca9abce4c801bc3bceed6d9'Sylvain Munaut16-24/+48
2012-11-14fw/comm: remove unused, outdated copy of msgb.hSteve Markgraf1-161/+0
Signed-off-by: Steve Markgraf <steve@steve-m.de>
2012-11-14smc: Fix a typo in the smc codeHolger Hans Peter Freyther1-1/+1
2012-11-11smc: Print the current state of the SMSHolger Hans Peter Freyther1-1/+3
When the connection may not released print the name of the current state to ease with debugging and verification that this is not a valid state transition.
2012-11-11sms: Remove the commented out code that was the default in OpenBSCHolger Hans Peter Freyther1-1/+0
This code got copied from OpenBSC and we used the network specific and private numbering plan. Remove it as it can be easily set.
2012-11-11sms: Reduce the logging level to debugHolger Hans Peter Freyther1-3/+3
<001c> gsm0411_smr.c:175 TX: MNSMS-REL-REQ adds little value so I am reducing it to a debug statement.
2012-11-05GSM48: Avoid unaligned access in gsm48_construct_raAndreas Eversberg1-1/+3
This avoids an unaligned access on platforms that don't support them, such as ARMv4/ARMv5.
2012-10-30Fix: Change T200 of LAPDm if SAPI 0 and SAPI 3 share bandwidth on SDCCHAndreas Eversberg3-0/+42
We use 1 second on FACCH and 2 seconds on SACCH when SMS is transfered during a call on TCH. There is no impact on bandwidth, because SAPIs use differen channels. In order to correctly transfer SMS during SDCCH, the T200 must be raised from 1 (SAPI 0) to 2 (SAPI 0 and 3), so T200 will not timeout before receiving acknowledge from BTS. This is because both SAPIs share the same ressource on SDCCH. After release of SAPI 3, T200 is lowered back to 1.
2012-10-30Fixed decoding of hexadecimal LAI componentsAndreas Eversberg6-27/+44
libosmocore has changed its LAI decoding from hex to decimal. This caused wrong decoding of MCC and MNC. In order to provide required hex transcoding, special hex encoding and decoding function are added to mobile/sysinfo.c.
2012-10-27Do not use --version-script linker flag on OSXTobias Engel2-2/+2
Add a check to not use --version-script linker flag if compiled on OSX since it doesn't exist there
2012-10-27Define struct iphdr for OSXTobias Engel1-1/+1
Use FreeBSD struct iphdr definition for OSX also. From the commentary in the source file: On BSD the IPv4 struct is called struct ip and instead of iXX the members are called ip_XX. One could change this code to use struct ip but that would require to define _BSD_SOURCE and that might have other complications. Instead make sure struct iphdr is present on FreeBSD.
2012-10-22logging: Make sure to install standard "end" command in VTY nodeHarald Welte1-0/+2
When you are in the config-log VTY node, you expect "end" to work like in any other sub-node of config.
2012-10-22logging: Don't forget to save "logging filter all 1"Harald Welte1-0/+4
Prior to this fix, a persistent file or syslog log configuration didn't work across an application re-start, as the "logging filter all 1" was never saved and thus no messages were logged.
2012-10-14Merge commit 'b8d18f32a1676f05d73bc9d94eadeaf5cc43c9a5'Sylvain Munaut20-93/+440
2012-10-01Drop unused imports from the python utilities.Paul Wise2-2/+0
2012-09-30Doc: Adding new parameter descriptions in gprs_bssgp_bss.cAndreas Eversberg1-1/+9
2012-09-30Fix: Correcting bssgp_tx_fc_bvc, bssgp_tx_fc_ms, bssgp_tx_ul_udAndreas Eversberg2-9/+28
2012-09-29Fix: gprs_ns_destroy() now frees all NSVCs and its timersAndreas Eversberg1-4/+14
Freeing memory of registered timers and file descriptors cause corrupt lists.