summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2013-09-29Menu App to select highram images from phone's flash memoryjolly/menuAndreas Eversberg2-1/+355
2013-05-23host/mobile: Add 'extern' qualifier to config_dir in app_mobile.hBhaskar1-1/+1
This prevents duplication definition with main.c From: Bhaskar <niceguy108@gmail.com> Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-05-23host/mobile: Fixup in error checking path of l23_app_initBhaskar1-3/+6
From: Bhaskar <niceguy108@gmail.com> Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-05-23host/osmocon: fix some printf format specifier in handle_write_dnloadBhaskar1-1/+1
From: Bhaskar <niceguy108@gmail.com> Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-05-23host/mobile: Fix trans_assign_trans_id() users error checkingSylvain Munaut2-2/+2
The returned value of trans_assign_trans_id() must be stored into a 'int' rather than uint8_t to allow proper testing of negative return values (errors). Thanks to Bhaskar <niceguy108@gmail.com> for the original patches. Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-05-23gsm48_mm.h: Added get_mm_name() to headerBhaskar1-0/+1
2013-05-23gsm48_mm.c: Bugfix: payload_len should be signed intBhaskar1-1/+1
As we later check if payload_len < 0, it should be signed, not unsigned.
2013-05-23osmoload: Fix fall-out from msgb_get() / msgb_pull() transitionBhaskar1-1/+1
Bugfix in Osmoload.c: Assigning correct value to data pointer in LOADER_MEM_READ. Wrong value was introduced in last update when msgb_get() was replaced by msgb_pull() which returns end of data instead of start of data.
2013-04-14host/mobile: Remove duplicate A5/1 support indication in vty 'show support'Sylvain Munaut1-1/+0
Patch-by: Martin Hauke <mardnh@gmx.de> Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-04-14host/mobile: Fix comment typoSylvain Munaut1-1/+1
Patch-by: Martin Hauke <mardnh@gmx.de> Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-04-13doc: Fix build readme with system-wide libosmocore detailsSylvain Munaut1-4/+12
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-04-07fw: remove deprecated chainload appSteve Markgraf2-56/+1
Signed-off-by: Steve Markgraf <steve@steve-m.de>
2013-04-07osmocon: embed chainloaderSteve Markgraf1-44/+65
This allows to directly load highram-images on compal phones with the commandline-switch -c. Signed-off-by: Steve Markgraf <steve@steve-m.de>
2013-03-07support.c: fix typo in commentHarald Welte1-1/+1
2013-01-13layer23: Be sure to close mncc socket on exit of mobile instanceAndreas Eversberg1-5/+5
2013-01-12layer23: Send SIM APDUs via GSMTAP, if enabledAndreas Eversberg1-1/+18
2013-01-10mobile: Fixed CLIR invokation / suppressionAndreas Eversberg1-2/+4
If "clip" is given at vty, CLIR must be suppressed, which results in presentation of caller ID digits, even if suppressed by network. If "clir" is given at vty, CLIR must be invoked, which results in restriction of caller ID digits, even if not suppressed by network. Note: This only work for outgoing caller ID. Incomming caller ID restriction cannot be suppressed.
2013-01-08misc: Fix typosDario Lombardo2-2/+2
2013-01-08mobile: Fixed ignoring of MDL-ERROR-INDAndreas Eversberg1-0/+1
Some MDL-ERROR causes must not lead to link failure. The missing "return 0" causes all errors to be ignored which are not listed inside switch/case statement.
2013-01-08fix: Use only single CCCH block to determine path lossAndreas Eversberg1-0/+7
The downlink singalling failure counter DSC is decremented by 4 in case of unsuccessfull decoding of CCCH block and incremented by 1 in case of successfull decoding of CCCH block. The initial and maximum value of 90 requires to check the signal only once per 51 multiframe. If DRX would be supported, only a subset of 51 multiframes are received, so the initial / maximum value of 90 must be reduced accordingly.
2013-01-07mobile: Allow test card to be maked as already attachedAndreas Eversberg5-16/+73
This way it is possible to use test card without making attachment to the network, if the LAI matches. It can be used to do faster testing.
2013-01-07mobile: Improved exit of mobile process, reset phoneAndreas Eversberg3-19/+62
If mobile phone has started, it is reset after shutdown. This ensures that the phone is not transmitting anymore, especially while shutting down in dedicated mode. Using CTRL+c: The first signal causes initiating of shutdown with detach procedure. The second signal causes initiating of shutdown without detach procedure. The third signal will exit process immidiately. (in case it hangs) Using CTRL+z: The first signal causes initiating of shutdown without detach procedure. A subsequent CTRL+c would exit process immidiately.
2013-01-05fw: pirelli_dpl10: initialize address line 22 for flash accessSteve Markgraf1-0/+6
Signed-off-by: Steve Markgraf <steve@steve-m.de>
2013-01-05fw: apps/loader: initialize framebuffer and show somethingSteve Markgraf1-0/+23
Since we now initialize the display for all apps, it otherwise just shows the last content of the display ram, which is weird. Signed-off-by: Steve Markgraf <steve@steve-m.de>
2013-01-05fw: keypad driver overhaul, support for different keymapsSteve Markgraf10-80/+90
Now the Pirelli DP-L10 keymap is supported. Signed-off-by: Steve Markgraf <steve@steve-m.de>
2013-01-05fw: introduce per-board uart mappingSteve Markgraf17-65/+123
Signed-off-by: Steve Markgraf <steve@steve-m.de>
2013-01-05fw: introduce with_irq parameter for board_init()Steve Markgraf15-64/+53
So far the loader-app used to do the init on its own, which brought a lot of problems for board- specific initialization. Signed-off-by: Steve Markgraf <steve@steve-m.de>
2013-01-05osmocon: make romloader output much less verboseSteve Markgraf1-20/+5
Most of the output was only for debug purposes anyway. Signed-off-by: Steve Markgraf <steve@steve-m.de>
2013-01-02target: Add support for IQ swap when requiredSylvain Munaut12-8/+82
Operation in GSM850 band requires IQ swap because of the offset PLL used in the TRF causing spectrum reversal. Thanks to Dieter Spaar for noticing the issue and the original patch Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-01-02fw: Fix link scripts to represent reality more accuratelySylvain Munaut2-17/+16
Previously they were hacks to allow build ... Not needed now. Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-01-02fw/build: Allow applications to filter environmentsSylvain Munaut3-1/+47
We use an external python script to solve which env to build, to mix board and app env list Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-01-02fw/build: Add ENV_ APP_ BOARD_ prefix to variables to cleanup namespaceSylvain Munaut6-49/+49
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-01-02fw/build: Group env / boards / applicationsSylvain Munaut1-42/+66
No functional changes, just moving things around Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-01-02fw/build: The app/board/env combo macro need to be lastSylvain Munaut1-5/+5
The app template will create the list of app specific objs so that needs to be before Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-01-02fw/build: Include app / board / env specific objs during buildSylvain Munaut1-2/+2
Just put the env with the rest and not manifest and also allow app additional files Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-01-02fw/build: Add a silent rule for the 'size' call as wellSylvain Munaut1-1/+2
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-01-02mobile/gsm411: Fix printf format warningSylvain Munaut1-1/+1
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-01-02mobile/gsm411: Adapt to new libosmocore API for SMC/SMR by adding idSylvain Munaut1-8/+8
Here we just use the transaction ID Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-01-02build: Use the system wide libosmocore for host applicationsSylvain Munaut1-31/+9
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-01-02host/cell_log: Prevent buffer overflow when displaying arfcn rangeSylvain Munaut1-5/+4
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-01-02host/l23: Added custom frequecy range to cell_log.Dario Lombardo2-5/+59
Written-by: Dario Lombardo <lomato@libero.it> Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-01-02l23 sysinfo: defer SI4 CBCH mobile allocation until SI1 is receivedAlex Badea1-0/+1
When parsing SI4, there's a check and a log message saying that CBCH MA is ignored until SI1 is received. Then the MA is decoded anyway -- incorrectly -- such that it remains incorrect even after receiving the next SI1. Fix that with an "else". Signed-off-by: Alex Badea <vamposdecampos@gmail.com> Signed-off-by: Andreas Eversberg <jolly@eversberg.eu>
2012-12-29Fix: Check if cell is barred, before performing location updatingAndreas Eversberg1-0/+9
If not checked, the MM process will crash, due to an endless loop of trying to do location updating to barred cell.
2012-11-22Rename various "rxlev" variable to "rxlev_dbm" and correct their signessAndreas Eversberg10-47/+47
All levels in range of 0..63 are now uint8_t and use "rxlev" as variable name. All levels in range of -110..-47 are now int8_t and use "rxlev_dbm" as variable name.
2012-11-22fix previous commit: use dbm2rxlev()Harald Welte2-2/+2
As andreas points out, there are structure members that are called 'rxlev' but which don't use the scaling (0..63) of the GSM specs, but which are already a signed type and in dBm. So they need to be converted. TODO: Rename those structure members to rxlev_dbm or something that explicitly states it is _not_ an 'RXLEV' value in terms of GSM.
2012-11-20Tell L1CTL_FBSB_REQ the expected received signal levelHarald Welte9-8/+14
As Dieter points out, this drastically improves the resiliance to high receive levels on the C155. We cannot blindly assume a received signal level of -85 dBm if the BTS is 2m away and we actually receive -40 dBm. This patch extends the L1CTL_FBSB_REQ data structure in layer 1 with the respective field, as well as the l1ctl_tx_fbsb_req() API function called from the various layer23 apps. "mobile" and "bcch_scan" already did a PM request and thus know the expected signal power. "ccch_scan" and "cbch_sniff" apparently don't do, so the -85 dBm constant is now hardcoded into the host-side source code there, and should probably be fixed in a follow-up patch.
2012-11-16Fix wrong print of scan freq when using gsm_print_arfcn twice for the same ↵Pavel Baturko1-4/+12
log message
2012-11-15Fix: Correctly convert ARFCN to index.Joshua Lackey1-1/+4
If you enable PCS, you'll never make it out of power-measurement without this patch.
2012-11-14Merge commit '5905d5be60249b2d9ca9abce4c801bc3bceed6d9'Sylvain Munaut16-24/+48
2012-11-14msgb: fix msgb_pull_u*()Steve Markgraf1-3/+3
msgb_pull returns a pointer to the new begin of the buffer, unlike msgb_get(), where those functions were originally taken from. Signed-off-by: Steve Markgraf <steve@steve-m.de>