summaryrefslogtreecommitdiffstats
path: root/src/target/firmware/board/gta0x/rf_tables.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/target/firmware/board/gta0x/rf_tables.c')
-rw-r--r--src/target/firmware/board/gta0x/rf_tables.c29
1 files changed, 0 insertions, 29 deletions
diff --git a/src/target/firmware/board/gta0x/rf_tables.c b/src/target/firmware/board/gta0x/rf_tables.c
index fd33b16b..9a08b3c7 100644
--- a/src/target/firmware/board/gta0x/rf_tables.c
+++ b/src/target/firmware/board/gta0x/rf_tables.c
@@ -23,35 +23,6 @@
#include <stdint.h>
#include <rf/txcal.h>
-#include <rf/vcxocal.h>
-
-/*
- * Here is a typical set of AFC Psi parameters for an FCDEV3B modem board,
- * computed by FreeCalypso fc-rfcal-vcxo calibration tool from frequency
- * offset measurements made with a CMU200 RF tester:
- *
- * Psi_sta_inv: 3462
- * Psi_st: 15
- * Psi_st_32: 992326
- * Psi_st_inv: 4328
- *
- * The following AFC slope number is the closest OsmocomBB-style afc_slope
- * integer corresponding to these Psi numbers; the true value is somewhere
- * between 454 and 455.
- *
- * This AFC slope setting is expected to be correct for both Openmoko and
- * FreeCalypso hardware as we use the same VCXO components as were used
- * by Openmoko.
- */
-int16_t afc_slope = 454;
-
-/*
- * The compiled-in AFC initial DAC value below is the same as was used by
- * the old OsmocomBB code written for Mot C1xx phones, but it will normally
- * be overridden by the per-unit factory calibration value read from the
- * /gsm/rf/afcdac file in FFS.
- */
-int16_t afc_initial_dac_value = -700;
/* APC offset (comes from the official firmware) for TI-classic targets */
uint8_t apc_offset = 48;