MNCC<->SIP bridge; attaches to OsmoMSC to interface with external SIP VoIP telephony https://osmocom.org/projects/osmo-sip-conector
Go to file
Vadim Yanitskiy 6122400451 build: include README.md into the release tarball
Change-Id: I4e1f0fd213fcc9e3b7e4a34f3380504696b2e08b
2024-01-26 23:38:07 +07:00
contrib Bump version: 1.6.2.6-47e6-dirty → 1.6.3 2023-09-12 17:24:27 +02:00
debian Bump version: 1.6.2.6-47e6-dirty → 1.6.3 2023-09-12 17:24:27 +02:00
doc Use uniform log format for default config files 2023-12-01 12:52:17 +01:00
src verbosely log MNCC and SDP 2024-01-25 02:55:58 +01:00
tests tests: $(BUILT_SOURCES) is not defined, depend on osmo-sip-connector 2023-03-30 02:13:00 +07:00
.gitignore .gitignore: Get rid of new autofoo tmp files 2021-02-02 16:42:12 +01:00
.gitreview Add git review config 2017-08-25 18:38:05 +02:00
COPYING Initial commit for a MNCC to SIP gateway (and maybe auth GW too) 2016-03-21 09:54:37 +01:00
Makefile.am build: include README.md into the release tarball 2024-01-26 23:38:07 +07:00
README.md Convert + Expand README file 2022-06-18 13:41:01 +02:00
TODO-RELEASE Add TODO-RELEASE 2022-01-03 12:26:58 +01:00
configure.ac Bump version: 1.6.2.6-47e6-dirty → 1.6.3 2023-09-12 17:24:27 +02:00
git-version-gen Fix git-version-gen 2017-10-28 18:20:00 +02:00
osmoappdesc.py osmoappdesc.py: switch to python 3 2019-12-11 09:43:11 +01:00

README.md

osmo-sip-connector - Osmocom SIP connector

This implements an interface between the MNCC (Mobile Network Call Control) interface of OsmoMSC (and also previously OsmoNITB) and SIP.

Call identities can be either the MSISDN or the IMSI of the subscriber.

Requirements of Equipment

  • DTMF need to be sent using SIP INFO messages. DTMF in RTP is not supported.
  • BTS+PBX and SIP connector+PBX must be in the same network (UDP must be able to flow directly between these elements)
  • No handover support.
  • IP based BTS (e.g. Sysmocom sysmoBTS but no Siemens BS11)
  • No emergency calls

Limitations

  • PT of RTP needs to match the one used by the BTS. E.g. AMR needs to use the same PT as the BTS. This is because rtp_payload2 is not yet supported by the osmo-bts software.

  • AMR SDP file doesn't include the mode-set params and allowed codec modes. This needs to be configured in some way.

Homepage

You can find the osmo-sip-connector issue tracker and wiki online at https://osmocom.org/projects/osmo-sip-conector and https://osmocom.org/projects/osmo-sip-conector/wiki

GIT Repository

You can clone from the official osmo-msc.git repository using

    git clone https://gitea.osmocom.org/cellular-infrastructure/osmo-sip-connector

There is a web interface at https://gitea.osmocom.org/cellular-infrastructure/osmo-sip-connector

Documentation

User Manuals and VTY reference manuals are [optionally] built in PDF form as part of the build process.

Pre-rendered PDF version of the current "master" can be found at User Manual as well as the VTY Reference Manual

Mailing List

Discussions related to osmo-sip-connector are happening on the openbsc@lists.osmocom.org mailing list, please see https://lists.osmocom.org/mailman/listinfo/openbsc for subscription options and the list archive.

Please observe the Osmocom Mailing List Rules when posting.

Contributing

Our coding standards are described at https://osmocom.org/projects/cellular-infrastructure/wiki/Coding_standards

We us a gerrit based patch submission/review process for managing contributions. Please see https://osmocom.org/projects/cellular-infrastructure/wiki/Gerrit for more details

The current patch queue for osmo-sip-connector can be seen at https://gerrit.osmocom.org/#/q/project:osmo-sip-connector+status:open