aboutsummaryrefslogtreecommitdiffstats
path: root/openbsc/tests/bsc-nat/bsc_nat_test.c
AgeCommit message (Collapse)AuthorFilesLines
2010-08-30nat: Replace the MGCP Endpoint if that is requiredHolger Hans Peter Freyther1-1/+1
Add code to replace the Endpoint number for the mgcp.
2010-08-29nat: Attempt to assign the BSC Timeslot based on a free listHolger Hans Peter Freyther1-4/+9
Do attempt to not reassign an endpoint immediately but go to the next free one.
2010-08-29nat: Make the code work in terms of endpoints instead of timeslot/multiplexHolger Hans Peter Freyther1-12/+5
We are going to have more than one trunk, so all code hardcoding the multiplex to zero must go. Avoid this kind of problem by saving the MGCP endpoint number and comparing that.
2010-08-03Use new include paths of libosmo-sccp 0.0.2Harald Welte1-1/+1
2010-07-31nat: Fix compilation with nat not being enabled.Holger Hans Peter Freyther1-0/+1
common_vty.c was including bsc_nat.h which tried to get the sccp/sccp_types.h which is not required to be installed. Move all structs using/embedding SCCP structures into the bsc_nat_sccp.h and include. This should fix the compilation.
2010-07-31sccp: Use the external libosmo-sccp as sccp implementationHolger Hans Peter Freyther1-0/+3
Add --enable-nat and --enable-osmo-bsc to build applications requiring the Osmo SCCP library to be installed. We are not using autodiscover as this is out of fashion.
2010-07-23nat: u_int16_t -> uint16_tHolger Hans Peter Freyther1-1/+1
2010-07-23nat: u_int8_t -> uint8_tHolger Hans Peter Freyther1-15/+15
2010-07-05nat: Fix the testcase and init the logging infrastructureHolger Hans Peter Freyther1-0/+1
2010-06-17bsc_api: Move gsm48_rcvmsg into the BSC API and dispatch.Holger Hans Peter Freyther1-4/+0
The next step in the way to the BSC API. We have a clear a new connection was opened signal now... and the MSC could use it...
2010-06-15nat: Make the test compile, no bssap.c, use log_targetHolger Hans Peter Freyther1-4/+4
2010-06-15nat: Allow to specify multiple entries in the access-list...Holger Hans Peter Freyther1-3/+10
Inside the access-list we have a list of entries that have either one allow or one deny rule... we do not allow to remove a single rule but one has to remove the whole list, in that case talloc will handle cleaning all entries. Right now the matching is O(n*m) as we traverse the list (multiple times) and run the regexp multiple times. One way to make it faster would be to concat all regexps into one.
2010-06-15nat: Shorten the access-list struct and method names (still way too long)Holger Hans Peter Freyther1-3/+3
2010-06-15[nat] Introduce the concept of access-listHolger Hans Peter Freyther1-3/+9
One can set one access-list to one BSC and one access-list to one NAT. The matching of IMSIs remains the same for now, also applying the white/blacklist. Access lists can not be deleted for now and no perf opt is done (e.g. one could cache the result of the last lookup in the bsc struct).
2010-06-15[nat] Make create_sccp_src_ref return the SCCP Connection.Holger Hans Peter Freyther1-3/+7
Right now it was not possible to just find a connection, by returning the connection that is created we will have direct access to it. It will be used by the local connection handling.
2010-06-15[nat] Remove parameter that is never accessed directlyHolger Hans Peter Freyther1-1/+1
The msgb needs to be around when we access the parsed structure but that needs to be guranteed by the caller handing out the parsed structure.
2010-06-15[nat] Set the connection type/reason as out parameterHolger Hans Peter Freyther1-2/+15
We are analyzing each CR message and it is nice to know the reason these connections were created. Change the nat method.
2010-06-15[nat] Parse the PAGING RESPONSE inside a CR message as well.Holger Hans Peter Freyther1-0/+16
Now we are parsing a CM Service Request, Location Updating Request and the Paging Response. For all other messages we claim to not support it and force a refuse.
2010-06-15[nat] Remove the imsi allow option on the nat level.Holger Hans Peter Freyther1-5/+0
For now we have: 1.) bsc imsi deny to deny at the BSC level 2.) bsc imsi allow to allow a SIM at the BSC level 3.) nat imsi deny to deny at the global level
2010-06-15[nat] Fix the regexp of the test and the command line.Holger Hans Peter Freyther1-3/+3
2010-06-15[nat] Implement IMSI filtering...Holger Hans Peter Freyther1-8/+104
2010-06-15nat: Start to add a test case.. with one CR message.Holger Hans Peter Freyther1-0/+19
2010-06-15nat: Change MGCP DLCX handling and send dummy MDCX to the BTS.Holger Hans Peter Freyther1-1/+13
When setting a new MSC timeslot to a SCCP connection check if any of the existing connections have this timeslot, if so we will send a DLCX down the stream to make sure it is closed there, when we will CRCX this new timeslot we will happily reallocate it. When the SCCP connection goes away, or we get a DLCX from the network, or the BSC is gone we will send a DLCX message down the stream as well. When we receive a CRCX from the network we will forward the CRCX as usual and send a dummy MDCX after it. For the DLCX and the dummy MDCX we send a custom MGCP message that will not provoke an answer. Even if the downstream MGCP GW will answer we will ignore it due the dummy transaction id that is not used anywhere else. This change should make sure that we close the dowstream endpoint all the time, even when the DLCX arrives after the SCCP connection is torndown.
2010-06-15[nat] Lookup by BSC Connection otherwise the point of reassigning the is ↵Holger Hans Peter Freyther1-5/+5
defeated When sending a MSG to the MSC try to find the to be used "src" reference by comparing the reference on the BSC and the BSC connection. Only this tuple needs to be unique. Actually only when looking at the SRC REF we need to compare the BSC as the dest reference should be unique but we are just making the check a bit stronger to make it look symmetric.
2010-06-15[nat] Add unit test to forward Proto Error messages back both ways.Holger Hans Peter Freyther1-0/+19
2010-06-15nat: Fix the test case by allocating a config.Holger Hans Peter Freyther1-0/+1
For the statistics we do need to have an allocated config, otherwise we will nicely crash.
2010-06-15nat: Return the SCCP Connection again...Holger Hans Peter Freyther1-2/+2
We will reset the multiplex in a DLCX message and then we can reset the multiplex as well...even if the MGCP connection is staying open. or at least this is a theory. The MSC likes to leave a connection open during CallControl when hanging up early enough in the process.
2010-06-15nat: Print the LAC that was searched for and not found.Holger Hans Peter Freyther1-3/+4
2010-06-15nat: Store the config in the connection instead of the lacHolger Hans Peter Freyther1-2/+4
This allows that we can print the Nr. next to the lac and it allows us to change the lac at runtime without reconnecting the BSC.
2010-06-15Revert "nat: Remember where the BTS is listening for things."Holger Hans Peter Freyther1-14/+0
Remove the code to parse port as we need to discover the BTS behind the nat and most likely it will have a different port than the one advertised by the BTS. This reverts commit c6a1fe773d16eb20d4cb1d3097761419436f4537.
2010-06-15nat: Test forwarding Inactivity Test messages.Holger Hans Peter Freyther1-0/+19
No change needed to the code.
2010-06-15nat: remove is called on already patched connections..Holger Hans Peter Freyther1-0/+4
Fix the test to search for the original message instead of the already patched one that should not find any items anyway. The remove is called on already patched connections so we need to match it with the patch reference count.
2010-06-15nat: Remember where the BTS is listening for things.Holger Hans Peter Freyther1-0/+14
Extract the port from the BSS's MGCP Gateway so we know where to forward the data to.
2010-06-15nat: Make rewrite work on string, read to a string first, copy to msgbHolger Hans Peter Freyther1-7/+4
The MGCP protocol parsing is adding '\0' to make sure we do not parse beyond where we should parse. This does not mix with strtok or similiar routines. For now we will read the msg into a global array first, then copy it to the msgb for mgcp protocol handling and if we are required to forward it to the MGCP we have a untouched copy we will modify into our own msgb.
2010-06-15nat: Return MGCP messages to the call agentHolger Hans Peter Freyther1-0/+30
Attempt to find the message by transaction id, then patch the response and use the IP/PORT of the local network, update the ci with the one from the BSC. This is currently not tracking any state of the MGCP and will not handle two bsc's... this will need to happen later. With this in we should be feature complete and now enter the mode of making all of this work reliable and fixing thinko's and other bugs.
2010-06-15nat: Allow to send MGCP messages from the BSC to the networkHolger Hans Peter Freyther1-0/+12
2010-06-15nat: Test rewriting of MGCP messages to patch ip and portHolger Hans Peter Freyther1-0/+35
Add code to change the ip and port for audio data inside MGCP messages. This is needed because the BSS might be behind the NAT and can not reach the network directly and might be behind a nat so the announced sourceport is not the one as we see it.
2010-06-15nat: Add code to find a BSC connection by the given msc multiplexHolger Hans Peter Freyther1-2/+43
2010-06-15nat: Look at the assignment command and remember on which timeslot the data isHolger Hans Peter Freyther1-2/+36
This information will be needed when we are trying to forward MGCP connections to and from the BSC through the IPA protocol.
2010-06-15nat: Return the SCCP connection, change order of patching and updatingHolger Hans Peter Freyther1-7/+8
* Return the SCCP connection. This will be needed to store the assigned timeslot in there. * Update code to work with this change * This uncovered a bug in the CC handling, at the time the BSC was passed it was still a null pointer and the code would have failed.
2010-06-15misc: Do not prepend 0x when using %p in printf.Holger Hans Peter Freyther1-5/+5
2010-06-15nat: Add test case and data for paging by lac test.Holger Hans Peter Freyther1-1/+45
2010-06-15nat: Add a test case for the connection trackingHolger Hans Peter Freyther1-1/+141
This test case tests connectiont tracking by sending a CR, getting a CC, sending a DTAP, receiving a DTAP, receiving a RLSD, sending a RLC. It verifies that the messages are properly patched specially the references at the BSC.
2010-06-15Correct the company name. It should be On-Waves (ehf)Holger Hans Peter Freyther1-1/+1
2010-06-15[nat] Specify the direction of the messageHolger Hans Peter Freyther1-9/+18
Do not run into the situation where we need to filter in one direction but it should not be filtered..
2010-06-15[nat] Prepare more sophisicated filtering and patchingHolger Hans Peter Freyther1-0/+170
Introduce a bsc_nat_parse method to parse a IP Access method into various parts. Write out the IPA Proto, in case SCCP is used, store the msg type, pointers to the source/dest local reference and other information. Use the result of bsc_nat_parse inside the bsc_nat_filter method to decide if the message should be dropped or not. In the future the bsc_nat_parse result will be used for patching SCCP references and other parts of the message. The filter language should be able to filter the msg type of SCCP messages and gain the "NOT" word in the filter language.