aboutsummaryrefslogtreecommitdiffstats
path: root/example
AgeCommit message (Collapse)AuthorFilesLines
2020-04-10Move example/ and ttcn3/ to sysmocom/ and sysmocom/ttcn3Pau Espin Pedrol111-3059/+0
This content is mostly specific to sysmocom's setup (thought it can still be re-used by other people if willing to). symlinks in ttcn3/ pointing to example/ are redone to point to sysmocom/. Change-Id: I364e0859c0851b9167907a4d948b659a0f6a19fb
2020-04-07Move suites/ dir inside example/Pau Espin Pedrol55-1/+1840
example/paths.conf and documentation are updated accordingly. Test suites should have been moved a long time ago, since the they are user or setup-specific based on what needs to be tested. Change-Id: I154b19979b545deba8b232b60172903f63fd9e28
2020-04-07enb: add measurement modifier to scenario filesAndre Puschmann2-0/+20
this commit adds basic support for configuring measurements in the eNB config. It currently support A1, A2, and A3 events. By default UE measurements are turned off and need to be enabled by configuring an event with: +mod-enb-meas-event@{name},{report_type},{value},{hysterisis},{time to trigger} For example one can update the a2 and a3 event with: +mod-enb-meas-event@a2,rsrq,-40,2,480+mod-enb-meas-event@a3,rsrp,6,1,512 Change-Id: Ia7657be2396886840570bc41645450a268b4cfff
2020-04-07amarisoftUE: adding basic support for Amarisoft UEPau Espin Pedrol1-0/+4
Change-Id: Idda0d3a040663969dd71781814198b47fff7daf3
2020-04-06epc: Replace rlc_drb_mode with qci attributePau Espin Pedrol3-4/+5
Change-Id: I21b7d7009f9b0df8ec4f59189a65cfc26f164f04
2020-04-03Add modem resource features attributes: 2g, 3g, 4gPau Espin Pedrol2-12/+14
This allows selecting modem by supported network type. It will allow using 4G modems with type different than srsue in 4g suite in the future. Change-Id: I38bcf6abf789f52c3ed0bee7911567fa872e2491
2020-04-01srs_{ue,enb}: Add modifier to pass arbitrary cmd line argumentsPau Espin Pedrol2-0/+6
Change-Id: Ie438c8aa9992dbc61b2133473a83d565cf5c7056
2020-04-01srs{enb,ue}: Use lowcase UHD as rf_type stringPau Espin Pedrol1-1/+1
Older versions of srsLTe.git required passing UHD in caps to the conf file, but that's not the case anymore. Let's use lowcase then. Change-Id: If8a289ba110229d31b62b0d3adc1ae97324e6d27
2020-04-01iperf3: add config to adjust the duration of the iperf runAndre Puschmann2-0/+6
the time is passed as a string param and is then converted into seconds when literals "h" or "m" are found. So it would accept 2m and would convert it to 120s, for example. Example: +cfg-iperf3-time@15+ Change-Id: Iff28816f83670751e9e91de31ec59b1b0ad8fc0d
2020-04-01Make amarisoft license server optionalPau Espin Pedrol2-3/+5
* Since license_server_addr logic is generic among all amarisoft software, let's move it to its own config category "amarisoft", which all amarisoft classes (amarisoft_{enb,epc}.py as of now) will import during configure(). * The license server is disabled by default (value 0.0.0.0) since the usual case is to have a license in the local system. * the license server can be enabled using scenario cfg-amarisoft-license@A.B.C.D where A.B.C.D is the address to use. Change-Id: Id5456ad9497e91370857b80ff9a389111d3611ff
2020-04-01srs_{ue,enb}: change UHD stream args and buffer size as function of cell ↵Andre Puschmann1-1/+1
width for B2XX Change-Id: I2de0526ee9bd2f7bb75c7d529b3f52d75117c5cc
2020-03-31Introduce support for AmarisoftEPCPau Espin Pedrol2-1/+9
* A new abstract generic base class EPC is created * srsEPC and AmarisoftEPC inherit from that class * options are loaded from defaults.conf in cascade. First generic "epc", afterwards the specific enb type. * A new scenario is added to select the EPC type to use. srsEPC is the default unless stated by an scenario. * AmarisoftEPC delegates setup of the tun IP address to an "ifup" script. As a result, since we run without root permissions (ony with CAP_NET_ADMIN), the ifup script itself is unablet o set the IP address. To solve this, we introduce a new osmo-gsm-tester helper script which must be installed in the slave node which can be called through sudo to increase privileges to do so. With this commit, I can already get srsUE<->amarisoftENB<->amarisoftEPC to pass ping and iperf3 4g tests. Change-Id: Ia50ea6a74b63b2d688c8d683aea11416ad40a6d3
2020-03-31Introduce initial Amarisoft ENB supportPau Espin Pedrol2-3/+14
* object class expects the amarisoft software to be placed in directory provided by env var AMARISOFT_PATH_ENB. On local runs, it will run the software from there. On remote runs it will copy over that directory to the slave. * Configuration provided works with 6 PRBs, but probably won't work for other values (yet). * ZMQ support not yet available, only UHD. One can select the Amarisoft ENB by declaring it in resources.conf: """ - label: AmarisoftENB-B200 type: amarisoftenb rf_dev_type: uhd rf_dev_args: "type=b200,serial=317B9FE,recv_frame_size=9232,send_frame_size=9232" remote_user: jenkins addr: 10.12.1.206 """ And running: """ $ export AMARISOFT_PATH_ENB=/path/to/binaries $ osmo-gsm-tester.py ... -s 4g:amarisoftenb-rftype@uhd+srsue-rftype@UHD+mod-enb-nprb@6 -t ping """ Change-Id: I1ddf4962ea6438ad977382ab201b724028ca46b3
2020-03-24defaults.conf: set num_carriers default valueAndre Puschmann1-0/+1
Change-Id: Ibe94fada0a40c499dd516408756c4ef7988ccec5
2020-03-24srs_ue: adding num_carriers paramter and corresponding modifierAndre Puschmann1-0/+3
this allows to configure a UE to support multiple carriers Change-Id: I4fa0a0c6e52efb17aa0b07e55abb5470d8028e8b
2020-03-24srs_enb: add num_cells param to srsENBAndre Puschmann2-0/+4
this is needed to support the upcoming multi-cell feature in srsENB. It's required for carrier aggregation (CA) but can also be used for (currently) two independent 4G cells. This commit adds baseline support for the parameter. Upcoming commits will add hooks to configure the cell's EARFCN, etc. Change-Id: I6d1658bf820163aee03b64b0f4ac68046c243f37
2020-03-23srs_ue: add scenario for airplane mode simulation in srsUEAndre Puschmann2-0/+6
Change-Id: I5db2ff325ce4b4236c1ceec0831dd7420d52dedb
2020-03-17scenarios: Drop unnecessary srsue-rftype-soapy.confPau Espin Pedrol1-4/+0
There's already a parametrized scenario handling it. We don't use any soapy backend for srsue anyway yet. Change-Id: Ie680178d2b16139473b5899803fb69a715a79216
2020-03-16srs{ue,enb,epc}: Disable pcap by default, allow enabling by paramPau Espin Pedrol2-0/+12
Take the change to fix several small things and support recording pcap in srsENB. pcap generation can be enabled with scenario cfg-srs-enable-pcap. Change-Id: Ia096a9be7efb2123f95115c751e2402fb4fec935
2020-03-04scenarios: Use parametrized scenario for rftypePau Espin Pedrol5-11/+3
Change-Id: Ib3d7db13d7de492eee5ad25cf5c88239be9e9fbf
2020-02-27Introduce LTE Transmission Mode and RLC DRB mode paramsPau Espin Pedrol3-0/+8
Change-Id: I38f247f266ba736cdbb6f36ba5673b8fd46a8d67
2020-02-27Use parametrized scenario to set ENB num_prbPau Espin Pedrol7-18/+3
Change-Id: Iec7d7e6312aee6f4e4ce6710bc78a144beff2f39
2020-02-27enb: Add modifiers for num_prbPau Espin Pedrol6-0/+18
Change-Id: I0b8c834f1c67cc4bf4d07d03358ba2012331cbde
2020-02-27srs_enb: Make num_prb a config parameterPau Espin Pedrol1-0/+1
Change-Id: I336e71f53556596050cf3eb55a7810a009dbf7a8
2020-02-20srsLTE: Support configuring different RF backendsPau Espin Pedrol7-1/+41
Before this patch, only virtual RF through ZeroMQ was supported. This patch allows configuring srsUE and srsENB to use a real SDR with UHD/SoapySDR backend connected through a physical RF network, while still keeping compatibility to run on virtual RF ZeroMQ network, based on the resources used (controlled by scenarios). For instance, one can first run a suite through the phyisical RF (using 2 UHD-controlled SDRs) and afterwards with ZeroMQ using the following default-suites.conf: - 4g:srsenb-rftype-uhd+srsue-rftype-uhd - 4g:srsenb-rftype-zmq+srsue-rftype-zmq Change-Id: I7dbbe328f4c0225fe74e878bb2da13fe39ccf049
2020-02-13default-suites.conf: Run 4g test suite (srsLTE ZeroMQ)Pau Espin Pedrol1-0/+2
Change-Id: I3f8c3588d7b139f044462d02069919256126bf57
2020-02-13Initial srsLTE supportPau Espin Pedrol2-0/+29
2 tests (iperf3, ping) working against a full srs{UE,ENB,EPC} network using ZeroMQ backend for RF (so no real RF support yet, that will come next). Related: OS##4295, OS#4296 Change-Id: I290c0d79258a9f94f00c7ff2e1c6c5579c0e32f4
2020-02-12resources.conf.prod: sysmocell500 new firmware now supports TRXDv1Pau Espin Pedrol1-1/+0
Change-Id: Iec50662580479bf7b6dc08d08a1de8075b2da078
2019-11-26default-suites.confg: Add suites to test LimeNet-microPau Espin Pedrol1-0/+18
Change-Id: I7f774e7bf6539c5afd1d3e35da765ba8d702fdb7
2019-11-26bts_osmotrx: Add support to run osmo-trx on LimeNet-microPau Espin Pedrol2-0/+18
bts_osmotrx will check if target host can run the inst, and otherwise run osmo-trx-lms already present in the system (installed by other means). This way same class can be used both ways, since the only real difference between the 2 scenarios is: * copying inst vs not copying it. * Running binary from inst vs running it from PATH. This commit does not provide a mechanism to make sure the osmo-trx or its dependencies are up-to-date in the target system. A solution for that will be provided separately. Related: SYS#4663 Change-Id: I6bd76f6d7e0cb2b6f7bdde971b6515846048a341
2019-11-26bts_osmotrx: Allow Setting Rx/TX paths through resources.confPau Espin Pedrol1-0/+2
Change-Id: Iddb0f20366c3242098bdf869f39fc3e2244c13e7
2019-11-26resources.conf: Mark osmo-bts-trx as supporting a5/3Pau Espin Pedrol2-5/+5
Change-Id: I478e0719589a8055e7b16536e679d2801efc5caf
2019-09-10Revert "resources.conf.prod: Use different ARFCN for sysmocell-5k"Pau Espin Pedrol1-2/+1
This reverts commit 91199a31377fe94a79376eca9232151a3f637bce. Since we now support powercycling the SC5, we don't longer need to use a different ARFCN for it. Change-Id: Ie8b49c556c90b4a97a73695a93ac4108660a217f
2019-09-10Support SC5 power cycling through powersupplyPau Espin Pedrol1-1/+7
* Add powersupply related code to bts_osmotrx.py to power cycle the board. * Each time the board is started, we need to unlock the RF (start TRX implementation). Change-Id: I8a1428c1ff90c9f5b42d7ffe86a6fc763819cba2
2019-09-10Add testsuite to check osmo-trx with TRXDv0Pau Espin Pedrol2-0/+5
Change-Id: I8e87aa5e24d1ed0737ec50e6a0f7fd8779a3c15b
2019-09-10resources.conf.prod: Fix indentationPau Espin Pedrol1-4/+4
Change-Id: Ic124c51aac26769058f0e90dc5497d16b44be085
2019-08-14default-suites: Drop multi-trx osmo-trx-lms testsPau Espin Pedrol1-2/+0
The feature is not supported yet and it seems to be leaving osmo-trx-lms in a zombie state preventing it to exit and blocking other tests. Let's disable it until this feature is working properly under manual use. Related: OS#4151 Change-Id: Ic255481e6f1fbbf06c4576f924cf27ae80567801
2019-07-26resources.conf.prod: Use different ARFCN for sysmocell-5kPau Espin Pedrol1-0/+2
Due to a bug in sysmocell-5K's TRX implementation, it may keep polluting the air transmitting after the BTS is disconnected. This could cause interferences with other tests. Correct fix would be to RF lock it after test finishes (through ccli), but let's simply use a different ARFCN for now. Related: OS#4129 Change-Id: I6d5555aa8740b262ee92110987189c076db44f76
2019-07-24Introduce and use osmo-bts-trx VTY cmd max_trxd_version on sysmocell-5KPau Espin Pedrol1-0/+1
Force TRXDv0 when using sysmocell-5k as a TRX, since its implementation (different than osmo-trx) doesn't support higher versions. Furthermore, it will crash upon receival of SETFORMAT string. By forcing maximum TRXD version to 0, osmo-bts-trx won't sent any SETFORMAT message since 0 is the initial version to use. Depends: osmo-bts.git I5eb1fdc002f9d7f4acf475356d8fc998dc8f6326 Related: OS#4006 Change-Id: Ic95c38d91dba354ae64c5edbfcea3fbbf34a7de3
2019-04-18resources.conf.prod: Update config to use new smart socket HW setupPau Espin Pedrol1-6/+6
Change-Id: I5cfce927569b6a2d8ca57d3394116bbcff3eee56
2019-03-27default-suites.conf: Add tests for OC2GPau Espin Pedrol1-0/+18
Change-Id: I5599c86565ebb6d7d6931d36fd49e57fe2020d1f
2019-03-27Integrate osmo-{bts,pcu}-oc2gPau Espin Pedrol3-0/+16
Change-Id: I446e27039f75e63c2870d751c190a4fd76947000
2019-03-07nitb_netreg_mass: Provide 100 subscriberszecke/testHolger Hans Peter Freyther1-1/+179
Change-Id: I386885f4179d4fc2df23cc48cd1eda850b5a990b
2019-03-07resource: Add a mobile resource for the virtual testHolger Hans Peter Freyther1-0/+24
Add a new resource and make a reservation in the suite. Change-Id: Ic26aa63cad62323bb85f952640672eb28af0eadc
2019-03-06resources.conf.prod: Add dev_args to select specific Lime devicePau Espin Pedrol1-0/+1
Change-Id: I6ef234edb06031644758174e93a9d3817d0acc1f
2019-02-20resources: Introduce a separate resource file for the virtual testsHolger Hans Peter Freyther1-0/+41
Create a dedicated resources file for running "virtual" tests. If all components run on the same machine we can avoid having to manage separate network. Change-Id: I0da1267a71dc06fd06f3cf4fc3dcfefda4bcf40b
2018-12-13ms_driver: Add a virtual bts and make use of itHolger Hans Peter Freyther2-0/+9
It's very close to the osmo-bts-trx but without osmo-trx. Modify the suite to make use of this BTS. Change-Id: I9f5a2501eb4473ccf2287c902ee207c6a45a1bc5
2018-11-30Add and use compatible scenario when testing IPA dynts with nanoBTSPau Espin Pedrol2-2/+15
nanoBTS doesn't support SDCCH8 in TS!=1 according to osmo-bsc code. Let's use in this case TCH/H to make sure they are not used for the test (since we require osmo-bsc to use full rate codecs for the call). Change-Id: I37f3fe813d4074fbfe64ff3176048e7d25d470e2
2018-11-23resources.conf: Set UHD identifiers on B200 devicesPau Espin Pedrol2-1/+3
osmo-trx-uhd uses these args during device search/selection process. As those were not set until now for B200, it means when a B200 was used by osmo-gsm-tester any UHD device could be picked up and used by UHD. That was actually happening since inclusion of UmTRX devices in Prod setup, when running tests against desired B200, actually the UmTRX device was being used. Change-Id: I696bbc800b05fdd9a68a77f363d76dcc53ef24ee
2018-11-19resources.conf.rnd: gobi2k changed by ec20Pau Espin Pedrol1-3/+3
Given current bad support of most features used, gobi2k modem was removed and an EC20 was added instead. Change-Id: I2df38547978c7d2b1a1309f6e73b5a59413e08ff
generated by cgit v1.2.1 (git 2.18.0) at 2021-04-13 02:02:02 +0000