From a4b90739898a9cf652c8365518b87b01806d5e9c Mon Sep 17 00:00:00 2001 From: Pau Espin Pedrol Date: Tue, 29 Jun 2021 12:16:32 +0200 Subject: Rename osmo dyn ts enums to contain SDCCH8 They will gain support to be activated as SDCCH/8 soon too. Related: SYS#5309 Depends: libosmocore.git I56dcfe4d17899630b17f80145c3ced72f1e91e68 Change-Id: Ia617d20fc52f09dbab8f4516c06fa1efac08e898 --- doc/manuals/abis/rsl.adoc | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'doc/manuals') diff --git a/doc/manuals/abis/rsl.adoc b/doc/manuals/abis/rsl.adoc index b4c2609f..6d8cd36c 100644 --- a/doc/manuals/abis/rsl.adoc +++ b/doc/manuals/abis/rsl.adoc @@ -123,7 +123,7 @@ Specific additions and limitations apply, see the linked sections. ==== Channel Activation When used on a timeslot using the non-standard channel combination -'NM_CHANC_OSMO_TCHFull_TCHHalf_PDCH' as configured by OML, the regular +'NM_CHANC_OSMO_DYN' as configured by OML, the regular RSL channel activation procedures can not only be used for activation of circuit-switched channels, but also for activation of a PDCH. @@ -417,7 +417,7 @@ include::dyn_ts_ipa_style2.msc[] ==== Osmocom Style Dynamic Channels This method is in use when OML uses -'NM_CHANC_OSMO_TCHFull_TCHHalf_PDCH' (0x90) for the given time-slot. +'NM_CHANC_OSMO_DYN' (0x90) for the given time-slot. The activation of PDCH is performed by using the regular 'RSL CHANNEL ACTIVATE' procedure according to <>, with these modifications: -- cgit v1.2.3