path: root/doc/manuals
diff options
authorNeels Hofmeyr <neels@hofmeyr.de>2016-12-01 03:02:03 +0100
committerNeels Hofmeyr <neels@hofmeyr.de>2018-11-27 17:54:20 +0100
commitdd4160e00331a9df8e0c5ce9a673f31bac0218a6 (patch)
treec0d7dac9aa08ff10aa508697f3b3015244cfb241 /doc/manuals
parent08b14a2fac56f5b376822c6f9c6907aad2e6cb7b (diff)
dynamic timeslots: add BSC level config instructions
Add high level description on and a config example for dynamic timeslots in a new chapter featured in the OsmoBSC and OsmoNITB manuals. From the OsmoBTS manual's chapter on dynamic timeslots, add references to the above. Change-Id: I44ff1e4c2340c65ff23e85408fc6d6a45ea9e046
Diffstat (limited to 'doc/manuals')
1 files changed, 6 insertions, 3 deletions
diff --git a/doc/manuals/chapters/dynamic-timeslots.adoc b/doc/manuals/chapters/dynamic-timeslots.adoc
index 29dff5b7..7c43d187 100644
--- a/doc/manuals/chapters/dynamic-timeslots.adoc
+++ b/doc/manuals/chapters/dynamic-timeslots.adoc
@@ -7,11 +7,14 @@ channel configurations, initiated by the BSC via (non-standard) Abis messages
The Abis message handling for dynamic timeslots is independent of the BTS
model. However, dynamic switchover will only work for BTS models that implement
the internal API to reconnect a timeslot (_bts_model_ts_disconnect()_ and
-_bts_model_ts_connect()_). Currently, these BTS models support dynamic
+_bts_model_ts_connect()_, see also <<osmobts_hardware_support>>).
+Currently, these OsmoBTS models support dynamic timeslots:
* _osmo-bts-sysmo_
* _osmo-bts-litecell15_
* _osmo-bts-trx_
-See also <<osmobts_hardware_support>>.
+Dynamic timeslots are driven by the BSC and need to be configured there. When
+using OsmoBSC or OsmoNITB, see the BTS configuration chapter on dynamic
+timeslots in <<userman-osmobsc>> or <<userman-osmonitb>>, respectively.