path: root/firmware/src/os/dbgu.c
AgeCommit message (Collapse)AuthorFilesLines
2017-03-17convert from u_int*_t to uint*_tHarald Welte1-1/+1
Change-Id: I33f6383535c5860b833f7ccb9bea122d38f28e3f
2014-11-11Allow some USB interrupts to be handled during dbgu_appendMin Xu1-1/+3
2014-11-11dbgu: make debug routines re-entrantMin Xu1-114/+191
2011-08-15DBGU: Print Reset controller Status Register on bootHarald Welte1-0/+4
This helps us to discover _why_ the CPU has been rebooted.
2011-06-16simtrace: add support for the analog bus switchHarald Welte1-1/+1
2006-12-18- add new DAC driver (instead of poti) for PICClaforge1-0/+11
- DFU: put all DEBUG_ defines in "#ifdef DEBUG" enclosure - alter GPIO defines for new OpenPICC v0.4 prototype - add new AT91F_DBGU_Fini() function - take care of new inverted USB pullip in OpenPICC v0.4 prototype - fix typo in 'opicc_reg_write' macro - add some more PICC related SSC code NOTE: this firmware is the first version that will _NOT_ run on a OpenPICC v0.3 anymore! (All changes by Henryk Ploetz) git-svn-id: https://svn.openpcd.org:2342/trunk@283 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
2006-10-15- add svn:ignore property to make 'svn st' output more realisticlaforge1-1/+7
- remove old copy+paste+edit port of parts of librfid - add ability to directly link librfid.a from mainline librfid - make usb string descriptors optional again (config.h) - fix TC_CDIV to reset correctly on swtrig (For OpenPICC) - temporarily re-implement ep0_send_data() in pcd_enumerate.c - make UDP_PUPv4 switching conditional to PCD - introduce DEBUG_UNBUFFERED define in dbgu.c - fix some signed/unsigned/typecast related compiler warnings - remove dead code from src/os/led.c - implement a 'mdelay' and 'usleep' stub function (FIXME!) - rename rc632_... functions into opcd_rc632_... to avoid confusion - introduce new 'main_librfid' TARGET - make main_{reqa,analog} work with librfid rather than old code - introduce mroe debugging options for FIQ handler code in Cstartup_app - lots of PICC work that doesn't need comments now git-svn-id: https://svn.openpcd.org:2342/trunk@266 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
2006-10-04v0.4 of the readers uses a different pin for the USB pulluplaforge1-2/+2
git-svn-id: https://svn.openpcd.org:2342/trunk@261 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
2006-10-01- add proper system interrupt (shared) demultiplexing codelaforge1-7/+5
- port debug unit, watchdog timer, periodic interval timer to system_irq.c git-svn-id: https://svn.openpcd.org:2342/trunk@252 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
2006-10-01clean up dbgu startup printout laforge1-8/+8
git-svn-id: https://svn.openpcd.org:2342/trunk@245 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
2006-09-27- add dbgu key '9' for software resetlaforge1-4/+8
- fix dbgu welcome message git-svn-id: https://svn.openpcd.org:2342/trunk@233 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
2006-09-22- move large rctx definitions to req_ctx.hlaforge1-0/+1
- add more fine-grained debugging macros in pcd_enumarate.c - resolve race conditions between main-loop ep_refill and irq-triggered ep_refill by adding one irq-[b]locking variant - consolidate endpoint reset code into reset_ep() - add code to handle correct transmission and reception of usb transfers larger than endpoint size - use new jump address (0x104000) in DFU Cstartup.S - move main_usb to pcd subdirectory - fix include/compile.h make dependencies - make usb benchmark code use new large req_ctx git-svn-id: https://svn.openpcd.org:2342/trunk@219 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
2006-09-20- Add OpenPICC register definition (and USB command handling)laforge1-1/+7
- Add automatic generation of include/compile.h with svn revision and compiletime - Add openpcd_compile_version structure to obtain version via USB - Move LED commands into new CMD_CLS_GENERIC family - Update TODO - Add support for large (2048 byte) request contexts in addition to 64byte - Shrink req_ctx size by collapsing rx and tx buffer into one - move definition of DFU_API_LOCATION to header file - Implement large req_ctx aware USB transmit / refill routines - Implement TX refilling for IRQ Endpoint - Print version information at startup time - move some generic req_ctx processing into usb_handler.c - Some further work on DFU (still not finished) - Only use '-Os' for DFU, use '-O2' for application code git-svn-id: https://svn.openpcd.org:2342/trunk@208 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
2006-09-13add GPL disclaimer to all C files that I wrotelaforge1-0/+21
git-svn-id: https://svn.openpcd.org:2342/trunk@195 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
2006-09-12move to new directorylaforge1-0/+303
git-svn-id: https://svn.openpcd.org:2342/trunk@191 6dc7ffe9-61d6-0310-9af1-9938baff3ed1