From 0fd615fd7b701fc0b3fd7f96429691e3eaa5a877 Mon Sep 17 00:00:00 2001 From: Neels Hofmeyr Date: Sat, 26 Jan 2019 20:36:12 +0100 Subject: add osmo_tdef API, originally adopted from osmo-bsc T_def Move T_def from osmo-bsc to libosmocore as osmo_tdef. Adjust naming to be more consistent. Upgrade to first class API: - add timer grouping - add generic vty support - add mising API doc - add C test - add VTY transcript tests, also as examples for using the API From osmo_fsm_inst_state_chg() API doc, cross reference to osmo_tdef API. The root reason for moving to libosmocore is that I want to use the mgw_endpoint_fsm in osmo-msc for inter-MSC handover, and hence want to move the FSM to libosmo-mgcp-client. This FSM uses the T_def from osmo-bsc. Though the mgw_endpoint_fsm's use of T_def is minimal, I intend to use the osmo_tdef API in osmo-msc (and probably elsewhere) as well. libosmocore is the most sensible place for this. osmo_tdef provides: - a list of Tnnnn (GSM) timers with description, unit and default value. - vty UI to allow users to configure non-default timeouts. - API to tie T timers to osmo_fsm states and set them on state transitions. - a few standard units (minute, second, millisecond) as well as a custom unit (which relies on the timer's human readable description to indicate the meaning of the value). - conversion for standard units: for example, some GSM timers are defined in minutes, while our FSM definitions need timeouts in seconds. Conversion is for convenience only and can be easily avoided via the custom unit. By keeping separate osmo_tdef arrays, several groups of timers can be kept separately. The VTY tests in tests/tdef/ showcase different schemes: - tests/vty/tdef_vty_test_config_root.c: Keep several timer definitions in separately named groups: showcase the osmo_tdef_vty_groups*() API. Each timer group exists exactly once. - tests/vty/tdef_vty_test_config_subnode.c: Keep a single list of timers without separate grouping. Put this list on a specific subnode below the CONFIG_NODE. There could be several separate subnodes with timers like this, i.e. continuing from this example, sets timers could be separated by placing timers in specific config subnodes instead of using the global group name. - tests/vty/tdef_vty_test_dynamic.c: Dynamically allocate timer definitions per each new created object. Thus there can be an arbitrary number of independent timer definitions, one per allocated object. T_def was introduced during the recent osmo-bsc refactoring for inter-BSC handover, and has proven useful: - without osmo_tdef, each invocation of osmo_fsm_inst_state_chg() needs to be programmed with the right timeout value, for all code paths that invoke this state change. It is a likely source of errors to get one of them wrong. By defining a T timer exactly for an FSM state, the caller can merely invoke the state change and trust on the original state definition to apply the correct timeout. - it is helpful to have a standardized config file UI to provide user configurable timeouts, instead of inventing new VTY commands for each separate application of T timer numbers. Change-Id: Ibd6b1ed7f1bd6e1f2e0fde53352055a4468f23e5 --- include/Makefile.am | 2 + include/osmocom/core/tdef.h | 172 +++++++++++ include/osmocom/vty/tdef_vty.h | 67 +++++ src/Makefile.am | 3 +- src/fsm.c | 4 + src/tdef.c | 282 ++++++++++++++++++ src/vty/Makefile.am | 3 +- src/vty/tdef_vty.c | 372 +++++++++++++++++++++++ tests/Makefile.am | 36 +++ tests/tdef/tdef_test.c | 445 ++++++++++++++++++++++++++++ tests/tdef/tdef_test.ok | 184 ++++++++++++ tests/tdef/tdef_vty_test_config_root.c | 292 ++++++++++++++++++ tests/tdef/tdef_vty_test_config_root.vty | 292 ++++++++++++++++++ tests/tdef/tdef_vty_test_config_subnode.c | 288 ++++++++++++++++++ tests/tdef/tdef_vty_test_config_subnode.vty | 107 +++++++ tests/tdef/tdef_vty_test_dynamic.c | 362 ++++++++++++++++++++++ tests/tdef/tdef_vty_test_dynamic.vty | 83 ++++++ tests/testsuite.at | 6 + 18 files changed, 2998 insertions(+), 2 deletions(-) create mode 100644 include/osmocom/core/tdef.h create mode 100644 include/osmocom/vty/tdef_vty.h create mode 100644 src/tdef.c create mode 100644 src/vty/tdef_vty.c create mode 100644 tests/tdef/tdef_test.c create mode 100644 tests/tdef/tdef_test.ok create mode 100644 tests/tdef/tdef_vty_test_config_root.c create mode 100644 tests/tdef/tdef_vty_test_config_root.vty create mode 100644 tests/tdef/tdef_vty_test_config_subnode.c create mode 100644 tests/tdef/tdef_vty_test_config_subnode.vty create mode 100644 tests/tdef/tdef_vty_test_dynamic.c create mode 100644 tests/tdef/tdef_vty_test_dynamic.vty diff --git a/include/Makefile.am b/include/Makefile.am index 25a6d75f..17f7d1ce 100644 --- a/include/Makefile.am +++ b/include/Makefile.am @@ -47,6 +47,7 @@ nobase_include_HEADERS = \ osmocom/core/statistics.h \ osmocom/core/strrb.h \ osmocom/core/talloc.h \ + osmocom/core/tdef.h \ osmocom/core/timer.h \ osmocom/core/timer_compat.h \ osmocom/core/utils.h \ @@ -154,6 +155,7 @@ nobase_include_HEADERS += \ osmocom/vty/vector.h \ osmocom/vty/vty.h \ osmocom/vty/ports.h \ + osmocom/vty/tdef_vty.h \ osmocom/ctrl/control_vty.h endif diff --git a/include/osmocom/core/tdef.h b/include/osmocom/core/tdef.h new file mode 100644 index 00000000..92b71597 --- /dev/null +++ b/include/osmocom/core/tdef.h @@ -0,0 +1,172 @@ +/*! \file tdef.h + * API to define Tnnn timers globally and use for FSM state changes. + */ +/* + * (C) 2018-2019 by sysmocom - s.f.m.c. GmbH + * + * All Rights Reserved + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Author: Neels Hofmeyr + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Affero General Public License as published by + * the Free Software Foundation; either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Affero General Public License for more details. + * + * You should have received a copy of the GNU Affero General Public License + * along with this program. If not, see . + */ +#pragma once + +#include +#include + +struct osmo_fsm_inst; + +/*! \defgroup Tdef Tnnn timer configuration + * @{ + * \file tdef.h + */ + +enum osmo_tdef_unit { + OSMO_TDEF_S = 0, /*!< most T are in seconds, keep 0 as default. */ + OSMO_TDEF_MS, /*!< milliseconds */ + OSMO_TDEF_M, /*!< minutes */ + OSMO_TDEF_CUSTOM, /*!< unspecified unit, explained in osmo_tdef.desc. */ +}; + +extern const struct value_string osmo_tdef_unit_names[]; +/*! \return enum osmo_tdef_unit value as human readable unit letter, or "custom-unit". */ +static inline const char *osmo_tdef_unit_name(enum osmo_tdef_unit val) +{ return get_value_string(osmo_tdef_unit_names, val); } + +/*! Define a GSM timer of the form Tnnn, with unit, default value and doc string. + * Typically used as an array with the last entry being left zero-initialized, e.g.: + * + * struct osmo_tdef tdefs[] = { + * { .T=10, .default_val=6, .desc="RR Assignment" }, + * { .T=101, .default_val=10, .desc="inter-BSC Handover MT, HO Request to HO Accept" }, + * { .T=3101, .default_val=3, .desc="RR Immediate Assignment" }, + * {} + * }; + * + * Program initialization should call osmo_tdefs_reset() so that all timers return the default_val, until e.g. the VTY + * configuration sets user-defined values (see osmo_tdef_vty_init()). + */ +struct osmo_tdef { + /*! T1234 number; type corresponds to struct osmo_fsm_inst.T. Negative and zero T numbers are actually possible, + * but be aware that osmo_tdef_fsm_inst_state_chg() interprets T == 0 as "no timer". */ + const int T; + /*! Timeout duration (according to unit), default value; type corresponds to osmo_fsm_inst_state_chg()'s + * timeout_secs argument. Note that osmo_fsm_inst_state_chg() clamps the range. */ + const unsigned long default_val; + const enum osmo_tdef_unit unit; + /*! Human readable description. For unit == OSMO_TDEF_CUSTOM, this should include an explanation of the value's + * unit. Best keep this a short one-liner (e.g. for VTY output). */ + const char *desc; + /*! Currently active timeout value, e.g. set by user config. This is the only mutable member: a user may + * configure the timeout value, but neither unit nor any other field. */ + unsigned long val; +}; + +/*! Iterate an array of struct osmo_tdef, the last item should be fully zero, i.e. "{}". + * Example: + * + * struct osmo_tdef *t; + * osmo_tdef_for_each(t, tdefs) { + * printf("%lu %s %s\n", t->val, osmo_tdef_unit_name(t->unit), t->desc); + * } + * + * \param[inout] t A struct osmo_tdef *t used for iteration, will point at the current entry inside the loop scope. + * \param[in] tdefs Array of struct osmo_tdef to iterate, zero-terminated. + */ +#define osmo_tdef_for_each(t, tdefs) \ + for (t = tdefs; t && (t->T || t->default_val || t->desc); t++) + +void osmo_tdefs_reset(struct osmo_tdef *tdefs); +unsigned long osmo_tdef_get(const struct osmo_tdef *tdefs, int T, enum osmo_tdef_unit as_unit, + unsigned long val_if_not_present); +struct osmo_tdef *osmo_tdef_get_entry(struct osmo_tdef *tdefs, int T); + +/*! Using osmo_tdef for osmo_fsm_inst: array entry for a mapping of state numbers to timeout definitions. + * For a usage example, see osmo_tdef_get_state_timeout() and test_tdef_state_timeout() in tdef_test.c. */ +struct osmo_tdef_state_timeout { + /*! Timer number to match struct osmo_tdef.T, and to pass to osmo_fsm_inst_state_chg(). */ + int T; + /*! If true, call osmo_fsm_inst_state_chg_keep_timer(). + * If T == 0, keep previous T number, otherwise also set fi->T. */ + bool keep_timer; +}; + +const struct osmo_tdef_state_timeout *osmo_tdef_get_state_timeout(uint32_t state, + const struct osmo_tdef_state_timeout *timeouts_array); + +/*! Call osmo_fsm_inst_state_chg() or osmo_fsm_inst_state_chg_keep_timer(), depending on the timeouts_array, tdefs and + * default_timeout. + * + * A T timer configured in sub-second precision is rounded up to the next full second. A timer in unit = + * OSMO_TDEF_CUSTOM is applied as if the unit is in seconds (i.e. this macro does not make sense for custom units!). + * + * See osmo_tdef_get_state_timeout() and osmo_tdef_get(). + * + * If no T timer is defined for the given state (T == 0), invoke the state change without a timeout. + * + * Should a T number be defined in timeouts_array that is not defined in tdefs, use default_timeout (in seconds). If + * default_timeout is negative, a missing T definition in tdefs instead causes a program abort. + * + * This is best used by wrapping this function call in a macro suitable for a specific FSM implementation, which can + * become as short as: my_fsm_state_chg(fi, NEXT_STATE): + * + * #define my_fsm_state_chg(fi, NEXT_STATE) \ + * osmo_tdef_fsm_inst_state_chg(fi, NEXT_STATE, my_fsm_timeouts, global_T_defs, 5) + * + * my_fsm_state_chg(fi, MY_FSM_STATE_1); + * // -> No timeout configured, will enter state without timeout. + * + * my_fsm_state_chg(fi, MY_FSM_STATE_3); + * // T423 configured for this state, will look up T423 in tdefs, or use 5 seconds if unset. + * + * my_fsm_state_chg(fi, MY_FSM_STATE_8); + * // keep_timer == true for this state, will invoke osmo_fsm_inst_state_chg_keep_timer(). + * + * \param[inout] fi osmo_fsm_inst to transition to another state. + * \param[in] state State number to transition to. + * \param[in] timeouts_array Array of struct osmo_tdef_state_timeout[32] to look up state in. + * \param[in] tdefs Array of struct osmo_tdef (last entry zero initialized) to look up T in. + * \param[in] default_timeout If a T is set in timeouts_array, but no timeout value is configured for T, then use this + * default timeout value as fallback, or pass -1 to abort the program. + * \return Return value from osmo_fsm_inst_state_chg() or osmo_fsm_inst_state_chg_keep_timer(). + */ +#define osmo_tdef_fsm_inst_state_chg(fi, state, timeouts_array, tdefs, default_timeout) \ + _osmo_tdef_fsm_inst_state_chg(fi, state, timeouts_array, tdefs, default_timeout, \ + __FILE__, __LINE__) +int _osmo_tdef_fsm_inst_state_chg(struct osmo_fsm_inst *fi, uint32_t state, + const struct osmo_tdef_state_timeout *timeouts_array, + const struct osmo_tdef *tdefs, unsigned long default_timeout, + const char *file, int line); + +/*! Manage timer definitions in named groups. + * This should be defined as an array with the final element kept fully zero-initialized, + * to be compatible with osmo_tdef_vty* API. There must not be any tdefs == NULL entries except on the final + * zero-initialized entry. */ +struct osmo_tdef_group { + const char *name; + const char *desc; + struct osmo_tdef *tdefs; +}; + +/*! Iterate an array of struct osmo_tdef_group, the last item should be fully zero, i.e. "{}". + * \param[inout] g A struct osmo_tdef_group *g used for iteration, will point at the current entry inside the loop scope. + * \param[in] tdefs Array of struct osmo_tdef_group to iterate, zero-terminated. + */ +#define osmo_tdef_groups_for_each(g, tdef_groups) \ + for (g = tdef_groups; g && g->tdefs; g++) + +/*! @} */ diff --git a/include/osmocom/vty/tdef_vty.h b/include/osmocom/vty/tdef_vty.h new file mode 100644 index 00000000..f55239ad --- /dev/null +++ b/include/osmocom/vty/tdef_vty.h @@ -0,0 +1,67 @@ +/*! \file tdef_vty.h + * API to configure osmo_tdef Tnnn timers from VTY configuration. + */ +/* (C) 2018-2019 by sysmocom - s.f.m.c. GmbH + * + * Author: Neels Hofmeyr + * + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Affero General Public License as published by + * the Free Software Foundation; either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Affero General Public License for more details. + * + * You should have received a copy of the GNU Affero General Public License + * along with this program. If not, see . + */ +#pragma once + +#include + +struct vty; + +/*! \defgroup Tdef_VTY Tnnn timer VTY configuration + * @{ + * \file tdef_vty.h + */ + +struct osmo_tdef; +struct osmo_tdef_group; + +#define OSMO_TDEF_VTY_ARG_T "TNNNN" +#define OSMO_TDEF_VTY_DOC_T "T-number, optionally preceded by 't' or 'T'.\n" +#define OSMO_TDEF_VTY_ARG_T_OPTIONAL "[" OSMO_TDEF_VTY_ARG_T "]" + +#define OSMO_TDEF_VTY_ARG_VAL "(<0-2147483647>|default)" +#define OSMO_TDEF_VTY_DOC_VAL "New timer value\n" "Set to default timer value\n" +#define OSMO_TDEF_VTY_ARG_VAL_OPTIONAL "[" OSMO_TDEF_VTY_ARG_VAL "]" + +#define OSMO_TDEF_VTY_ARG_SET OSMO_TDEF_VTY_ARG_T " " OSMO_TDEF_VTY_ARG_VAL +#define OSMO_TDEF_VTY_DOC_SET OSMO_TDEF_VTY_DOC_T OSMO_TDEF_VTY_DOC_VAL +#define OSMO_TDEF_VTY_ARG_SET_OPTIONAL OSMO_TDEF_VTY_ARG_T_OPTIONAL " " OSMO_TDEF_VTY_ARG_VAL_OPTIONAL + +int osmo_tdef_vty_set_cmd(struct vty *vty, struct osmo_tdef *tdefs, const char **args); +int osmo_tdef_vty_show_cmd(struct vty *vty, struct osmo_tdef *tdefs, const char *T_arg, + const char *prefix_fmt, ...); +void osmo_tdef_vty_write(struct vty *vty, struct osmo_tdef *tdefs, + const char *prefix_fmt, ...); + +void osmo_tdef_vty_out_one(struct vty *vty, struct osmo_tdef *t, const char *prefix_fmt, ...); +void osmo_tdef_vty_out_all(struct vty *vty, struct osmo_tdef *tdefs, const char *prefix_fmt, ...); + +void osmo_tdef_vty_out_one_va(struct vty *vty, struct osmo_tdef *t, const char *prefix_fmt, va_list va); +void osmo_tdef_vty_out_all_va(struct vty *vty, struct osmo_tdef *tdefs, const char *prefix_fmt, va_list va); + +struct osmo_tdef *osmo_tdef_vty_parse_T_arg(struct vty *vty, struct osmo_tdef *tdefs, const char *osmo_tdef_str); +unsigned long osmo_tdef_vty_parse_val_arg(const char *val_arg, unsigned long default_val); + +void osmo_tdef_vty_groups_init(enum node_type parent_node, struct osmo_tdef_group *groups); +void osmo_tdef_vty_groups_write(struct vty *vty, const char *indent); + +/*! @} */ diff --git a/src/Makefile.am b/src/Makefile.am index 6840f798..27ab7026 100644 --- a/src/Makefile.am +++ b/src/Makefile.am @@ -23,7 +23,8 @@ libosmocore_la_SOURCES = timer.c timer_gettimeofday.c timer_clockgettime.c \ loggingrb.c crc8gen.c crc16gen.c crc32gen.c crc64gen.c \ macaddr.c stat_item.c stats.c stats_statsd.c prim.c \ conv_acc.c conv_acc_generic.c sercomm.c prbs.c \ - isdnhdlc.c + isdnhdlc.c \ + tdef.c if HAVE_SSSE3 libosmocore_la_SOURCES += conv_acc_sse.c diff --git a/src/fsm.c b/src/fsm.c index 0d31f872..6e15ab70 100644 --- a/src/fsm.c +++ b/src/fsm.c @@ -498,6 +498,10 @@ static int state_chg(struct osmo_fsm_inst *fi, uint32_t new_state, * timer_cb. If passing timeout_secs == 0, it is recommended to also pass T == * 0, so that fi->T is reset to 0 when no timeout is invoked. * + * See also osmo_tdef_fsm_inst_state_chg() from the osmo_tdef API, which + * provides a unified way to configure and apply GSM style Tnnnn timers to FSM + * state transitions. + * * Range: since time_t's maximum value is not well defined in a cross platform * way, clamp timeout_secs to the maximum of the signed 32bit range, or roughly * 68 years (float(0x7fffffff) / (60. * 60 * 24 * 365.25) = 68.0497). Thus diff --git a/src/tdef.c b/src/tdef.c new file mode 100644 index 00000000..7e79d680 --- /dev/null +++ b/src/tdef.c @@ -0,0 +1,282 @@ +/*! \file tdef.c + * Implementation to define Tnnn timers globally and use for FSM state changes. + */ +/* + * (C) 2018-2019 by sysmocom - s.f.m.c. GmbH + * + * All Rights Reserved + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Author: Neels Hofmeyr + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Affero General Public License as published by + * the Free Software Foundation; either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Affero General Public License for more details. + * + * You should have received a copy of the GNU Affero General Public License + * along with this program. If not, see . + */ + +#include + +#include +#include + +/*! \addtogroup Tdef + * + * Implementation to define Tnnn timers globally and use for FSM state changes. + * + * See also \ref Tdef_VTY + * + * osmo_tdef provides: + * + * - a list of Tnnnn (GSM) timers with description, unit and default value. + * - vty UI to allow users to configure non-default timeouts. + * - API to tie T timers to osmo_fsm states and set them on state transitions. + * + * - a few standard units (minute, second, millisecond) as well as a custom unit + * (which relies on the timer's human readable description to indicate the + * meaning of the value). + * - conversion for standard units: for example, some GSM timers are defined in + * minutes, while our FSM definitions need timeouts in seconds. Conversion is + * for convenience only and can be easily avoided via the custom unit. + * + * By keeping separate osmo_tdef arrays, several groups of timers can be kept + * separately. The VTY tests in tests/tdef/ showcase different schemes: + * + * - \ref tests/vty/tdef_vty_test_config_root.c: + * Keep several timer definitions in separately named groups: showcase the + * osmo_tdef_vty_groups*() API. Each timer group exists exactly once. + * + * - \ref tests/vty/tdef_vty_test_config_subnode.c: + * Keep a single list of timers without separate grouping. + * Put this list on a specific subnode below the CONFIG_NODE. + * There could be several separate subnodes with timers like this, i.e. + * continuing from this example, sets of timers could be separated by placing + * timers in specific config subnodes instead of using the global group name. + * + * - \ref tests/vty/tdef_vty_test_dynamic.c: + * Dynamically allocate timer definitions per each new created object. + * Thus there can be an arbitrary number of independent timer definitions, one + * per allocated object. + * + * osmo_tdef was introduced because: + * + * - without osmo_tdef, each invocation of osmo_fsm_inst_state_chg() needs to be + * programmed with the right timeout value, for all code paths that invoke this + * state change. It is a likely source of errors to get one of them wrong. By + * defining a T timer exactly for an FSM state, the caller can merely invoke the + * state change and trust on the original state definition to apply the correct + * timeout. + * + * - it is helpful to have a standardized config file UI to provide user + * configurable timeouts, instead of inventing new VTY commands for each + * separate application of T timer numbers. See \ref tdef_vty.h. + * + * @{ + * \file tdef.c + */ + +/*! a = return_val * b. \return 0 if factor is below 1. */ +static unsigned long osmo_tdef_factor(enum osmo_tdef_unit a, enum osmo_tdef_unit b) +{ + if (b == a + || b == OSMO_TDEF_CUSTOM || a == OSMO_TDEF_CUSTOM) + return 1; + + switch (b) { + case OSMO_TDEF_MS: + switch (a) { + case OSMO_TDEF_S: + return 1000; + case OSMO_TDEF_M: + return 60*1000; + default: + return 0; + } + case OSMO_TDEF_S: + switch (a) { + case OSMO_TDEF_M: + return 60; + default: + return 0; + } + default: + return 0; + } +} + +/*! \return val in unit to_unit, rounded up to the next integer value and clamped to ULONG_MAX, or 0 if val == 0. */ +static unsigned long osmo_tdef_round(unsigned long val, enum osmo_tdef_unit from_unit, enum osmo_tdef_unit to_unit) +{ + unsigned long f; + if (!val) + return 0; + + f = osmo_tdef_factor(from_unit, to_unit); + if (f == 1) + return val; + if (f < 1) { + f = osmo_tdef_factor(to_unit, from_unit); + return (val / f) + (val % f? 1 : 0); + } + /* range checking */ + if (f > (ULONG_MAX / val)) + return ULONG_MAX; + return val * f; +} + +/*! Set all osmo_tdef values to the default_val. + * It is convenient to define a tdefs array by setting only the default_val, and calling osmo_tdefs_reset() once for + * program startup. (See also osmo_tdef_vty_init()) + * \param[in] tdefs Array of timer definitions, last entry being fully zero. + */ +void osmo_tdefs_reset(struct osmo_tdef *tdefs) +{ + struct osmo_tdef *t; + osmo_tdef_for_each(t, tdefs) + t->val = t->default_val; +} + +/*! Return the value of a T timer from a list of osmo_tdef, in the given unit. + * If no such timer is defined, return the default value passed, or abort the program if default < 0. + * + * Round up any value match as_unit: 1100 ms as OSMO_TDEF_S becomes 2 seconds, as OSMO_TDEF_M becomes one minute. + * However, always return a value of zero as zero (0 ms as OSMO_TDEF_M still is 0 m). + * + * Range: even though the value range is unsigned long here, in practice, using ULONG_MAX as value for a timeout in + * seconds may actually wrap to negative or low timeout values (e.g. in struct timeval). It is recommended to stay below + * INT_MAX seconds. See also osmo_fsm_inst_state_chg(). + * + * Usage example: + * + * struct osmo_tdef global_T_defs[] = { + * { .T=7, .default_val=50, .desc="Water Boiling Timeout" }, // default is .unit=OSMO_TDEF_S == 0 + * { .T=8, .default_val=300, .desc="Tea brewing" }, + * { .T=9, .default_val=5, .unit=OSMO_TDEF_M, .desc="Let tea cool down before drinking" }, + * { .T=10, .default_val=20, .unit=OSMO_TDEF_M, .desc="Forgot to drink tea while it's warm" }, + * {} // <-- important! last entry shall be zero + * }; + * osmo_tdefs_reset(global_T_defs); // make all values the default + * osmo_tdef_vty_init(global_T_defs, CONFIG_NODE); + * + * val = osmo_tdef_get(global_T_defs, 7, OSMO_TDEF_S, -1); // -> 50 + * sleep(val); + * + * val = osmo_tdef_get(global_T_defs, 7, OSMO_TDEF_M, -1); // 50 seconds becomes 1 minute -> 1 + * sleep_minutes(val); + * + * val = osmo_tdef_get(global_T_defs, 99, OSMO_TDEF_S, 3); // not defined, returns 3 + * + * val = osmo_tdef_get(global_T_defs, 99, OSMO_TDEF_S, -1); // not defined, program aborts! + * + * \param[in] tdefs Array of timer definitions, last entry must be fully zero initialized. + * \param[in] T Timer number to get the value for. + * \param[in] as_unit Return timeout value in this unit. + * \param[in] val_if_not_present Fallback value to return if no timeout is defined. + * \return Timeout value in the unit given by as_unit, rounded up if necessary, or val_if_not_present. + */ +unsigned long osmo_tdef_get(const struct osmo_tdef *tdefs, int T, enum osmo_tdef_unit as_unit, unsigned long val_if_not_present) +{ + const struct osmo_tdef *t = osmo_tdef_get_entry((struct osmo_tdef*)tdefs, T); + if (!t) { + OSMO_ASSERT(val_if_not_present >= 0); + return val_if_not_present; + } + return osmo_tdef_round(t->val, t->unit, as_unit); +} + +/*! Find tdef entry matching T. + * This is useful for manipulation, which is usually limited to the VTY configuration. To retrieve a timeout value, + * most callers probably should use osmo_tdef_get() instead. + * \param[in] tdefs Array of timer definitions, last entry being fully zero. + * \param[in] T Timer number to get the entry for. + * \return osmo_tdef entry matching T in given array, or NULL if no match is found. + */ +struct osmo_tdef *osmo_tdef_get_entry(struct osmo_tdef *tdefs, int T) +{ + struct osmo_tdef *t; + osmo_tdef_for_each(t, tdefs) { + if (t->T == T) + return t; + } + return NULL; +} + +/*! Using osmo_tdef for osmo_fsm_inst: find a given state's osmo_tdef_state_timeout entry. + * + * The timeouts_array shall contain exactly 32 elements, regardless whether only some of them are actually populated + * with nonzero values. 32 corresponds to the number of states allowed by the osmo_fsm_* API. Lookup is by array index. + * Not populated entries imply a state change invocation without timeout. + * + * For example: + * + * struct osmo_tdef_state_timeout my_fsm_timeouts[32] = { + * [MY_FSM_STATE_3] = { .T = 423 }, // look up timeout configured for T423 + * [MY_FSM_STATE_7] = { .T = 235 }, + * [MY_FSM_STATE_8] = { .keep_timer = true }, // keep previous state's T number, continue timeout. + * // any state that is omitted will remain zero == no timeout + * }; + * osmo_tdef_get_state_timeout(MY_FSM_STATE_0, &my_fsm_timeouts) -> NULL, + * osmo_tdef_get_state_timeout(MY_FSM_STATE_7, &my_fsm_timeouts) -> { .T = 235 } + * + * The intention is then to obtain the timer like osmo_tdef_get(global_T_defs, T=235); see also + * fsm_inst_state_chg_T() below. + * + * \param[in] state State constant to look up. + * \param[in] timeouts_array Array[32] of struct osmo_tdef_state_timeout defining which timer number to use per state. + * \return A struct osmo_tdef_state_timeout entry, or NULL if that entry is zero initialized. + */ +const struct osmo_tdef_state_timeout *osmo_tdef_get_state_timeout(uint32_t state, const struct osmo_tdef_state_timeout *timeouts_array) +{ + const struct osmo_tdef_state_timeout *t; + OSMO_ASSERT(state < 32); + t = &timeouts_array[state]; + if (!t->keep_timer && !t->T) + return NULL; + return t; +} + +/*! See invocation macro osmo_tdef_fsm_inst_state_chg() instead. + * \param[in] file Source file name, like __FILE__. + * \param[in] line Source file line number, like __LINE__. + */ +int _osmo_tdef_fsm_inst_state_chg(struct osmo_fsm_inst *fi, uint32_t state, + const struct osmo_tdef_state_timeout *timeouts_array, + const struct osmo_tdef *tdefs, unsigned long default_timeout, + const char *file, int line) +{ + const struct osmo_tdef_state_timeout *t = osmo_tdef_get_state_timeout(state, timeouts_array); + unsigned long val; + + /* No timeout defined for this state? */ + if (!t) + return _osmo_fsm_inst_state_chg(fi, state, 0, 0, file, line); + + if (t->keep_timer) { + int rc = _osmo_fsm_inst_state_chg_keep_timer(fi, state, file, line); + if (t->T && !rc) + fi->T = t->T; + return rc; + } + + val = osmo_tdef_get(tdefs, t->T, OSMO_TDEF_S, default_timeout); + return _osmo_fsm_inst_state_chg(fi, state, val, t->T, file, line); +} + +const struct value_string osmo_tdef_unit_names[] = { + { OSMO_TDEF_S, "s" }, + { OSMO_TDEF_MS, "ms" }, + { OSMO_TDEF_M, "m" }, + { OSMO_TDEF_CUSTOM, "custom-unit" }, + {} +}; + +/*! @} */ diff --git a/src/vty/Makefile.am b/src/vty/Makefile.am index 2e494982..cdde0fa5 100644 --- a/src/vty/Makefile.am +++ b/src/vty/Makefile.am @@ -11,7 +11,8 @@ lib_LTLIBRARIES = libosmovty.la libosmovty_la_SOURCES = buffer.c command.c vty.c vector.c utils.c \ telnet_interface.c logging_vty.c stats_vty.c \ - fsm_vty.c talloc_ctx_vty.c + fsm_vty.c talloc_ctx_vty.c \ + tdef_vty.c libosmovty_la_LDFLAGS = -version-info $(LIBVERSION) -no-undefined libosmovty_la_LIBADD = $(top_builddir)/src/libosmocore.la $(TALLOC_LIBS) endif diff --git a/src/vty/tdef_vty.c b/src/vty/tdef_vty.c new file mode 100644 index 00000000..1c6af70a --- /dev/null +++ b/src/vty/tdef_vty.c @@ -0,0 +1,372 @@ +/*! \file tdef_vty.c + * Implementation to configure osmo_tdef Tnnn timers from VTY configuration. + */ +/* (C) 2018-2019 by sysmocom - s.f.m.c. GmbH + * + * Author: Neels Hofmeyr + * + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Affero General Public License as published by + * the Free Software Foundation; either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Affero General Public License for more details. + * + * You should have received a copy of the GNU Affero General Public License + * along with this program. If not, see . + * + */ + +#include +#include +#include +#include + +#include +#include +#include +#include + +/*! \addtogroup Tdef_VTY + * + * VTY API for \ref Tdef. + * + * @{ + * \file tdef_vty.c + */ + +/*! Parse an argument like "T1234", "t1234" or "1234", as from OSMO_TDEF_VTY_ARG_T. + * \param[in] vty VTY context for vty_out() of error messages. + * \param[in] tdefs Array of timer definitions to look up T timer. + * \param[in] T_str Argument string. It is not validated, expected to be checked by VTY input. + * \return the corresponding osmo_tdef entry from the tdefs array, or NULL if no such entry exists. + */ +struct osmo_tdef *osmo_tdef_vty_parse_T_arg(struct vty *vty, struct osmo_tdef *tdefs, const char *T_str) +{ + long l; + int T; + struct osmo_tdef *t; + char *endptr; + const char *T_nr_str; + + if (!tdefs) { + vty_out(vty, "%% Error: no timers found%s", VTY_NEWLINE); + return NULL; + } + + T_nr_str = T_str; + if (T_nr_str[0] == 't' || T_nr_str[0] == 'T') + T_nr_str++; + + errno = 0; + l = strtol(T_nr_str, &endptr, 10); + if (errno || *endptr || l > INT_MAX) { + vty_out(vty, "%% No such timer: '%s'%s", T_str, VTY_NEWLINE); + return NULL; + } + T = l; + + t = osmo_tdef_get_entry(tdefs, T); + if (!t) + vty_out(vty, "%% No such timer: T%d%s", T, VTY_NEWLINE); + return t; +} + +/*! Parse an argument of the form "(0-2147483647|default)", as from OSMO_TDEF_VTY_ARG_VAL. + * \param[in] val_arg Argument string (not format checked). + * \param[in] default_val Value to return in case of val_arg being "default". + * \return Parsed value or default_val. + */ +unsigned long osmo_tdef_vty_parse_val_arg(const char *val_arg, unsigned long default_val) +{ + if (!strcmp(val_arg, "default")) + return default_val; + return atoll(val_arg); +} + +/*! Apply a timer configuration from VTY argument strings. + * Employ both osmo_tdef_vty_parse_T_arg() and osmo_tdef_vty_parse_val_arg() to configure a T timer in an array of + * tdefs. Evaluate two arguments, a "T1234" argument and a "(0-2147483647|default)" argument, as from + * OSMO_TDEF_VTY_ARGS. If the T timer given in the first argument is found in tdefs, set it to the value given in the + * second argument. + * \param[in] vty VTY context for vty_out() of error messages. + * \param[in] tdefs Array of timer definitions to look up T timer. + * \param[in] args Array of string arguments like { "T1234", "23" }. + * \return CMD_SUCCESS, or CMD_WARNING if no such timer is found in tdefs. + */ +int osmo_tdef_vty_set_cmd(struct vty *vty, struct osmo_tdef *tdefs, const char **args) +{ + const char *T_arg = args[0]; + const char *val_arg = args[1]; + struct osmo_tdef *t = osmo_tdef_vty_parse_T_arg(vty, tdefs, T_arg); + if (!t) + return CMD_WARNING; + t->val = osmo_tdef_vty_parse_val_arg(val_arg, t->default_val); + return CMD_SUCCESS; +} + +/*! Output one or all timers to the VTY, as for a VTY command like 'show timer [TNNNN]'. + * If T_arg is NULL, print all timers in tdefs to the VTY. + * If T_arg is not NULL, employ osmo_tdef_vty_parse_T_arg() to select one timer from tdefs and print only that to the + * VTY. + * \param[in] vty VTY context for vty_out() of error messages. + * \param[in] tdefs Array of timer definitions. + * \param[in] T_arg Argument string like "T1234", or NULL. + * \param[in] prefix_fmt Arbitrary string to start each line with, with variable printf like arguments. + * \return CMD_SUCCESS, or CMD_WARNING if no such timer is found in tdefs. + */ +int osmo_tdef_vty_show_cmd(struct vty *vty, struct osmo_tdef *tdefs, const char *T_arg, + const char *prefix_fmt, ...) +{ + va_list va; + if (T_arg) { + struct osmo_tdef *t = osmo_tdef_vty_parse_T_arg(vty, tdefs, T_arg); + if (!t) + return CMD_WARNING; + va_start(va, prefix_fmt); + osmo_tdef_vty_out_one_va(vty, t, prefix_fmt, va); + va_end(va); + } else { + va_start(va, prefix_fmt); + osmo_tdef_vty_out_all_va(vty, tdefs, prefix_fmt, va); + va_end(va); + } + return CMD_SUCCESS; +} + +/*! Write to VTY the current status of one timer. + * \param[in] vty VTY context for vty_out(). + * \param[in] t The timer to print. + * \param[in] prefix_fmt Arbitrary string to start each line with, with variable vprintf like arguments. + * \param[in] va va_list instance. As always, call va_start() before, and va_end() after this call. + */ +void osmo_tdef_vty_out_one_va(struct vty *vty, struct osmo_tdef *t, const char *prefix_fmt, va_list va) +{ + if (!t) { + vty_out(vty, "%% Error: no such timer%s", VTY_NEWLINE); + return; + } + if (prefix_fmt) + vty_out_va(vty, prefix_fmt, va); + vty_out(vty, "T%d = %lu%s%s\t%s (default: %lu%s%s)%s", + t->T, t->val, + t->unit == OSMO_TDEF_CUSTOM ? "" : " ", t->unit == OSMO_TDEF_CUSTOM ? "" : osmo_tdef_unit_name(t->unit), + t->desc, t->default_val, + t->unit == OSMO_TDEF_CUSTOM ? "" : " ", t->unit == OSMO_TDEF_CUSTOM ? "" : osmo_tdef_unit_name(t->unit), + VTY_NEWLINE); +} + +/*! Write to VTY the current status of one timer. + * \param[in] vty VTY context for vty_out(). + * \param[in] t The timer to print. + * \param[in] prefix_fmt Arbitrary string to start each line with, with variable printf like arguments. + */ +void osmo_tdef_vty_out_one(struct vty *vty, struct osmo_tdef *t, const char *prefix_fmt, ...) +{ + va_list va; + va_start(va, prefix_fmt); + osmo_tdef_vty_out_one_va(vty, t, prefix_fmt, va); + va_end(va); +} + +/*! Write to VTY the current status of all given timers. + * \param[in] vty VTY context for vty_out(). + * \param[in] tdefs Array of timers to print, ended with a fully zero-initialized entry. + * \param[in] prefix_fmt Arbitrary string to start each line with, with variable vprintf like arguments. + * \param[in] va va_list instance. As always, call va_start() before, and va_end() after this call. + */ +void osmo_tdef_vty_out_all_va(struct vty *vty, struct osmo_tdef *tdefs, const char *prefix_fmt, va_list va) +{ + struct osmo_tdef *t; + if (!tdefs) { + vty_out(vty, "%% Error: no such timers%s", VTY_NEWLINE); + return; + } + osmo_tdef_for_each(t, tdefs) { + va_list va2; + va_copy(va2, va); + osmo_tdef_vty_out_one_va(vty, t, prefix_fmt, va); + va_end(va2); + } +} + +/*! Write to VTY the current status of all given timers. + * \param[in] vty VTY context for vty_out(). + * \param[in] tdefs Array of timers to print, ended with a fully zero-initialized entry. + * \param[in] prefix_fmt Arbitrary string to start each line with, with variable printf like arguments. + */ +void osmo_tdef_vty_out_all(struct vty *vty, struct osmo_tdef *tdefs, const char *prefix_fmt, ...) +{ + va_list va; + va_start(va, prefix_fmt); + osmo_tdef_vty_out_all_va(vty, tdefs, prefix_fmt, va); + va_end(va); +} + +/*! Write current timer configuration arguments to the vty. Skip all entries that reflect their default value. + * The passed prefix string must contain both necessary indent and the VTY command the specific implementation is using. + * See tdef_vty_test_config_subnode.c and tdef_vty_test_dynamic.c for examples. + * \param[in] vty VTY context. + * \param[in] tdefs Array of timers to print, ended with a fully zero-initialized entry. + * \param[in] prefix_fmt Arbitrary string to start each line with, with variable printf like arguments. + */ +void osmo_tdef_vty_write(struct vty *vty, struct osmo_tdef *tdefs, const char *prefix_fmt, ...) +{ + va_list va; + struct osmo_tdef *t; + osmo_tdef_for_each(t, tdefs) { + if (t->val == t->default_val) + continue; + if (prefix_fmt && *prefix_fmt) { + va_start(va, prefix_fmt); + vty_out_va(vty, prefix_fmt, va); + va_end(va); + } + vty_out(vty, "T%d %lu%s", t->T, t->val, VTY_NEWLINE); + } +} + +/*! Singleton Tnnn groups definition as set by osmo_tdef_vty_groups_init(). */ +static struct osmo_tdef_group *global_tdef_groups; + +/*! \return true iff the first characters of str fully match startswith_str or both are empty. */ +static bool startswith(const char *str, const char *startswith_str) +{ + if (!startswith_str) + return true; + if (!str) + return false; + return strncmp(str, startswith_str, strlen(startswith_str)) == 0; +} + +DEFUN(show_timer, show_timer_cmd, "DYNAMIC", "DYNAMIC") + /* show timer [(alpha|beta|gamma)] [TNNNN] */ +{ + const char *group_arg = argc > 0 ? argv[0] : NULL; + const char *T_arg = argc > 1 ? argv[1] : NULL; + struct osmo_tdef_group *g; + + /* The argument should be either "tea" or "software", but the VTY also allows partial arguments + * like "softw" or "t" (which can also be ambiguous). */ + + osmo_tdef_groups_for_each(g, global_tdef_groups) { + if (!group_arg || startswith(g->name, group_arg)) + osmo_tdef_vty_show_cmd(vty, g->tdefs, T_arg, "%s: ", g->name); + } + return CMD_SUCCESS; +} + +DEFUN(cfg_timer, cfg_timer_cmd, "DYNAMIC", "DYNAMIC") + /* show timer [(alpha|beta|gamma)] [TNNNN] [(<0-2147483647>|default)] */ +{ + const char *group_arg; + const char **timer_args; + struct osmo_tdef *tdefs = NULL; + struct osmo_tdef_group *g = NULL; + + /* If any arguments are missing, redirect to 'show' */ + if (argc < 3) + return show_timer(self, vty, argc, argv); + + /* If all arguments are passed, this is configuring a timer. */ + group_arg = argc > 0 ? argv[0] : NULL; + timer_args = argv + 1; + osmo_tdef_groups_for_each(g, global_tdef_groups) { + if (strcmp(g->name, group_arg)) + continue; + if (tdefs) { + vty_out(vty, "%% Error: ambiguous timer group match%s", VTY_NEWLINE); + return CMD_WARNING; + } + tdefs = g->tdefs; + } + + return osmo_tdef_vty_set_cmd(vty, tdefs, timer_args); +} + +static char *add_group_args(void *talloc_ctx, char *dest) +{ + struct osmo_tdef_group *g; + osmo_talloc_asprintf(talloc_ctx, dest, "[("); + osmo_tdef_groups_for_each(g, global_tdef_groups) { + osmo_talloc_asprintf(talloc_ctx, dest, "%s%s", + (g == global_tdef_groups) ? "" : "|", + g->name); + } + osmo_talloc_asprintf(talloc_ctx, dest, ")]"); + return dest; +} + +static char *add_group_docs(void *talloc_ctx, char *dest) +{ + struct osmo_tdef_group *g; + osmo_tdef_groups_for_each(g, global_tdef_groups) { + osmo_talloc_asprintf(talloc_ctx, dest, "%s\n", g->desc); + } + return dest; +} + +static char *timer_command_string(const char *prefix, const char *suffix) +{ + char *dest = NULL; + osmo_talloc_asprintf(tall_vty_cmd_ctx, dest, "%s ", prefix); + dest = add_group_args(tall_vty_cmd_ctx, dest); + osmo_talloc_asprintf(tall_vty_cmd_ctx, dest, " %s", suffix); + return dest; +} + +static char *timer_doc_string(const char *prefix, const char *suffix) +{ + char *dest = NULL; + osmo_talloc_asprintf(tall_vty_cmd_ctx, dest, "%s ", prefix); + dest = add_group_docs(tall_vty_cmd_ctx, dest); + osmo_talloc_asprintf(tall_vty_cmd_ctx, dest, " %s", suffix); + return dest; +} + +/*! Convenience implementation for keeping a fixed set of timer groups in a program. + * Install a 'timer [(group|names|...)] [TNNN] [(|default)]' command under the given parent_node, + * and install a 'show timer...' command on VIEW_NODE and ENABLE_NODE. + * For a usage example, see \ref tdef_test_config_root.c. + * The given timer definitions group is stored in a global pointer, so this can be done only once per main() scope. + * It would also be possible to have distinct timer groups on separate VTY subnodes, with a "manual" implementation, but + * not with this API. + * \param[in] parent_node VTY node id at which to add the timer group commands, e.g. CONFIG_NODE. + * \param[in] groups Global timer groups definition. + */ +void osmo_tdef_vty_groups_init(enum node_type parent_node, struct osmo_tdef_group *groups) +{ + struct osmo_tdef_group *g; + OSMO_ASSERT(!global_tdef_groups); + global_tdef_groups = groups; + + osmo_tdef_groups_for_each(g, global_tdef_groups) + osmo_tdefs_reset(g->tdefs); + + show_timer_cmd.string = timer_command_string("show timer", OSMO_TDEF_VTY_ARG_T_OPTIONAL); + show_timer_cmd.doc = timer_doc_string(SHOW_STR "Show timers\n", OSMO_TDEF_VTY_DOC_T); + + cfg_timer_cmd.string = timer_command_string("timer", OSMO_TDEF_VTY_ARG_SET_OPTIONAL); + cfg_timer_cmd.doc = timer_doc_string("Configure or show timers\n", OSMO_TDEF_VTY_DOC_SET); + + install_element_ve(&show_timer_cmd); + install_element(parent_node, &cfg_timer_cmd); +} + +/*! Write the global osmo_tdef_group configuration to VTY, as previously passed to osmo_tdef_vty_groups_init(). + * \param[in] vty VTY context. + * \param[in] indent String to print before each line. + */ +void osmo_tdef_vty_groups_write(struct vty *vty, const char *indent) +{ + struct osmo_tdef_group *g; + osmo_tdef_groups_for_each(g, global_tdef_groups) + osmo_tdef_vty_write(vty, g->tdefs, "%stimer %s ", indent ? : "", g->name); +} + +/*! @} */ diff --git a/tests/Makefile.am b/tests/Makefile.am index 91f042e8..54fb11f0 100644 --- a/tests/Makefile.am +++ b/tests/Makefile.am @@ -27,6 +27,9 @@ check_PROGRAMS = timer/timer_test sms/sms_test ussd/ussd_test \ oap/oap_client_test gsm29205/gsm29205_test \ logging/logging_vty_test \ vty/vty_transcript_test \ + tdef/tdef_test tdef/tdef_vty_test_config_root \ + tdef/tdef_vty_test_config_subnode \ + tdef/tdef_vty_test_dynamic \ $(NULL) if ENABLE_MSGFILE @@ -221,6 +224,18 @@ prbs_prbs_test_SOURCES = prbs/prbs_test.c gsm23003_gsm23003_test_SOURCES = gsm23003/gsm23003_test.c gsm23003_gsm23003_test_LDADD = $(LDADD) $(top_builddir)/src/gsm/libosmogsm.la +tdef_tdef_test_SOURCES = tdef/tdef_test.c +tdef_tdef_test_LDADD = $(LDADD) + +tdef_tdef_vty_test_config_root_SOURCES = tdef/tdef_vty_test_config_root.c +tdef_tdef_vty_test_config_root_LDADD = $(LDADD) $(top_builddir)/src/vty/libosmovty.la + +tdef_tdef_vty_test_config_subnode_SOURCES = tdef/tdef_vty_test_config_subnode.c +tdef_tdef_vty_test_config_subnode_LDADD = $(LDADD) $(top_builddir)/src/vty/libosmovty.la + +tdef_tdef_vty_test_dynamic_SOURCES = tdef/tdef_vty_test_dynamic.c +tdef_tdef_vty_test_dynamic_LDADD = $(LDADD) $(top_builddir)/src/vty/libosmovty.la + # The `:;' works around a Bash 3.2 bug when the output is not writeable. $(srcdir)/package.m4: $(top_srcdir)/configure.ac :;{ \ @@ -284,6 +299,10 @@ EXTRA_DIST = testsuite.at $(srcdir)/package.m4 $(TESTSUITE) \ timer/clk_override_test.ok \ oap/oap_client_test.ok oap/oap_client_test.err \ vty/vty_transcript_test.vty \ + tdef/tdef_test.ok \ + tdef/tdef_vty_test_config_root.vty \ + tdef/tdef_vty_test_config_subnode.vty \ + tdef/tdef_vty_test_dynamic.vty \ $(NULL) DISTCLEANFILES = atconfig atlocal conv/gsm0503_test_vectors.c @@ -328,6 +347,7 @@ endif # To update the VTY script from current application behavior, # pass -u to osmo_verify_transcript_vty.py by doing: # make vty-test U=-u + vty-test-logging: osmo_verify_transcript_vty.py -v \ -p 42042 \ @@ -340,9 +360,25 @@ vty-test-vty: -r "$(top_builddir)/tests/vty/vty_transcript_test" \ $(U) $(srcdir)/vty/*.vty +vty-test-tdef: + osmo_verify_transcript_vty.py -v \ + -p 42042 \ + -r "$(top_builddir)/tests/tdef/tdef_vty_test_config_root" \ + $(U) $(srcdir)/tdef/tdef_vty_test_config_root.vty + osmo_verify_transcript_vty.py -v \ + -p 42042 \ + -r "$(top_builddir)/tests/tdef/tdef_vty_test_config_subnode" \ + $(U) $(srcdir)/tdef/tdef_vty_test_config_subnode.vty + osmo_verify_transcript_vty.py -v \ + -p 42042 \ + -r "$(top_builddir)/tests/tdef/tdef_vty_test_dynamic" \ + $(U) $(srcdir)/tdef/tdef_vty_test_dynamic.vty + +# don't run vty tests concurrently so that the ports don't conflict vty-test: $(MAKE) vty-test-logging $(MAKE) vty-test-vty + $(MAKE) vty-test-tdef ctrl-test: echo "No CTRL tests exist currently" diff --git a/tests/tdef/tdef_test.c b/tests/tdef/tdef_test.c new file mode 100644 index 00000000..682c7ac7 --- /dev/null +++ b/tests/tdef/tdef_test.c @@ -0,0 +1,445 @@ +/* Test implementation for osmo_tdef API. */ +/* + * (C) 2019 by sysmocom s.f.m.c. GmbH + * + * All Rights Reserved + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Author: Neels Hofmeyr + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include +#include +#include + +#include +#include +#include + +#include + +static void *ctx = NULL; + +static struct osmo_tdef tdefs[] = { + { .T=1, .default_val=100, .desc="100s" }, + { .T=2, .default_val=100, .unit=OSMO_TDEF_MS, .desc="100ms" }, + { .T=3, .default_val=100, .unit=OSMO_TDEF_M, .desc="100m" }, + { .T=4, .default_val=100, .unit=OSMO_TDEF_CUSTOM, .desc="100 potatoes" }, + + { .T=7, .default_val=50, .desc="Water Boiling Timeout" }, // default is .unit=OSMO_TDEF_S == 0 + { .T=8, .default_val=300, .desc="Tea brewing" }, + { .T=9, .default_val=5, .unit=OSMO_TDEF_M, .desc="Let tea cool down before drinking" }, + { .T=10, .default_val=20, .unit=OSMO_TDEF_M, .desc="Forgot to drink tea while it's warm" }, + + /* test conversions */ + { .T=1000, .default_val=2*1000, .unit=OSMO_TDEF_MS, .desc="two seconds from ms" }, + { .T=1001, .default_val=60*1000, .unit=OSMO_TDEF_MS, .desc="one minute from ms" }, + { .T=1002, .default_val=(ULONG_MAX/60), .unit=OSMO_TDEF_M, .desc="almost too many seconds" }, + { .T=1003, .default_val=ULONG_MAX, .unit=OSMO_TDEF_M, .desc="too many seconds" }, + { .T=1004, .default_val=1, .unit=OSMO_TDEF_MS, .desc="one ms" }, + { .T=1005, .default_val=0, .unit=OSMO_TDEF_MS, .desc="zero ms" }, + { .T=1006, .default_val=0, .unit=OSMO_TDEF_S, .desc="zero s" }, + { .T=1007, .default_val=0, .unit=OSMO_TDEF_M, .desc="zero m" }, + { .T=1008, .default_val=0, .unit=OSMO_TDEF_CUSTOM, .desc="zero" }, + + /* test range */ + { .T=INT_MAX, .default_val=ULONG_MAX, .unit=OSMO_TDEF_S, .desc="very large" }, + { .T=INT_MAX-1, .default_val=ULONG_MAX-1, .unit=OSMO_TDEF_S, .desc="very large" }, + { .T=INT_MAX-2, .default_val=LONG_MAX, .unit=OSMO_TDEF_S, .desc="very large" }, + { .T=INT_MAX-3, .default_val=ULONG_MAX, .unit=OSMO_TDEF_M, .desc="very large in minutes" }, + { .T=INT_MIN, .default_val=ULONG_MAX, .unit=OSMO_TDEF_S, .desc="negative" }, + + { .T=0, .default_val=1, .unit=OSMO_TDEF_CUSTOM, .desc="zero" }, + + /* no desc */ + { .T=123, .default_val=1 }, + + {} // <-- important! last entry shall be zero +}; + +#define print_tdef_get(T, AS_UNIT) do { \ + unsigned long val = osmo_tdef_get(tdefs, T, AS_UNIT, 999); \ + printf("osmo_tdef_get(tdefs, %d, %s, 999)\t= %lu\n", T, osmo_tdef_unit_name(AS_UNIT), val); \ + } while (0) + +#define print_tdef_get_short(T, AS_UNIT) do { \ + unsigned long val = osmo_tdef_get(tdefs, T, AS_UNIT, 999); \ + printf("osmo_tdef_get(%d, %s)\t= %lu\n", T, osmo_tdef_unit_name(AS_UNIT), val); \ + } while (0) + +void print_tdef_info(unsigned int T) +{ + const struct osmo_tdef *t = osmo_tdef_get_entry(tdefs, T); + if (!t) { + printf("T%d=NULL", T); + return; + } + printf("T%d=%lu%s", T, t->val, osmo_tdef_unit_name(t->unit)); + if (t->val != t->default_val) + printf("(def=%lu)", t->default_val); + printf("\n"); +} + +static void test_tdef_get() +{ + int i; + enum osmo_tdef_unit as_unit; + + printf("\n%s()\n", __func__); + + osmo_tdefs_reset(tdefs); // make all values the default + + for (i = 0; i < ARRAY_SIZE(tdefs)-1; i++) { + unsigned int T = tdefs[i].T; + print_tdef_info(T); + for (as_unit = OSMO_TDEF_S; as_unit <= OSMO_TDEF_CUSTOM; as_unit++) { + print_tdef_get_short(T, as_unit); + } + } +} + +static void test_tdef_get_nonexisting() +{ + printf("\n%s()\n", __func__); + + print_tdef_get(5, OSMO_TDEF_S); + print_tdef_get(5, OSMO_TDEF_MS); + print_tdef_get(5, OSMO_TDEF_M); + print_tdef_get(5, OSMO_TDEF_CUSTOM); +} + +static void test_tdef_set_and_get() +{ + struct osmo_tdef *t; + printf("\n%s()\n", __func__); + + t = osmo_tdef_get_entry(tdefs, 7); + printf("setting 7 = 42\n"); + t->val = 42; + print_tdef_info(7); + print_tdef_get_short(7, OSMO_TDEF_MS); + print_tdef_get_short(7, OSMO_TDEF_S); + print_tdef_get_short(7, OSMO_TDEF_M); + print_tdef_get_short(7, OSMO_TDEF_CUSTOM); + + printf("setting 7 = 420\n"); + t->val = 420; + print_tdef_info(7); + print_tdef_get_short(7, OSMO_TDEF_MS); + print_tdef_get_short(7, OSMO_TDEF_S); + print_tdef_get_short(7, OSMO_TDEF_M); + print_tdef_get_short(7, OSMO_TDEF_CUSTOM); + + printf("resetting\n"); + osmo_tdefs_reset(tdefs); + print_tdef_info(7); + print_tdef_get_short(7, OSMO_TDEF_S); +} + +enum test_tdef_fsm_states { + S_A = 0, + S_B, + S_C, + S_D, + S_G, + S_H, + S_I, + S_J, + S_K, + S_L, + S_M, + S_N, + S_O, + S_X, + S_Y, + S_Z, +}; + +static const struct osmo_tdef_state_timeout test_tdef_state_timeouts[32] = { + [S_A] = { .T = 1 }, + [S_B] = { .T = 2 }, + [S_C] = { .T = 3 }, + [S_D] = { .T = 4 }, + + [S_G] = { .T = 7 }, + [S_H] = { .T = 8 }, + [S_I] = { .T = 9 }, + [S_J] = { .T = 10 }, + + /* keep_timer: adopt whichever T was running before and continue the timeout. */ + [S_K] = { .keep_timer = true }, + /* S_F defines an undefined T, but should continue previous state's timeout. */ + [S_L] = { .T = 123, .keep_timer = true }, + + /* range */ + [S_M] = { .T = INT_MAX }, + [S_N] = { .T = INT_MIN }, + + /* T0 is not addressable from osmo_tdef_state_timeout, since it is indistinguishable from an unset entry. Even + * though a timeout value is set for T=0, the transition to state S_O will show "no timer configured". */ + [S_O] = { .T = 0 }, + + /* S_X undefined on purpose */ + /* S_Y defines a T that does not exist */ + [S_Y] = { .T = 666 }, + /* S_Z undefined on purpose */ +}; + +#define S(x) (1 << (x)) + +static const struct osmo_fsm_state test_tdef_fsm_states[] = { +#define DEF_STATE(NAME) \ + [S_##NAME] = { \ + .name = #NAME, \ + .out_state_mask = 0 \ + | S(S_A) \ + | S(S_B) \ + | S(S_C) \ + | S(S_D) \ + | S(S_G) \ + | S(S_H) \ + | S(S_I) \ + | S(S_J) \ + | S(S_K) \ + | S(S_L) \ + | S(S_M) \ + | S(S_N) \ + | S(S_O) \ + | S(S_X) \ + | S(S_Y) \ + | S(S_Z) \ + , \ + } + + DEF_STATE(A), + DEF_STATE(B), + DEF_STATE(C), + DEF_STATE(D), + + DEF_STATE(G), + DEF_STATE(H), + DEF_STATE(I), + DEF_STATE(J), + + DEF_STATE(K), + DEF_STATE(L), + + DEF_STATE(M), + DEF_STATE(N), + DEF_STATE(O), + + DEF_STATE(X), + DEF_STATE(Y), + /* Z: test not being allowed to transition to other states. */ + [S_Z] = { + .name = "Z", + .out_state_mask = 0 + | S(S_A) + , + }, +}; + +static const struct value_string test_tdef_fsm_event_names[] = { {} }; + +static struct osmo_fsm test_tdef_fsm = { + .name = "tdef_test", + .states = test_tdef_fsm_states, + .event_names = test_tdef_fsm_event_names, + .num_states = ARRAY_SIZE(test_tdef_fsm_states), + .log_subsys = DLGLOBAL, +}; + +const struct timeval fake_time_start_time = { 123, 456 }; + +#define fake_time_passes(secs, usecs) do \ +{ \ + struct timeval diff; \ + osmo_gettimeofday_override_add(secs, usecs); \ + osmo_clock_override_add(CLOCK_MONOTONIC, secs, usecs * 1000); \ + timersub(&osmo_gettimeofday_override_time, &fake_time_start_time, &diff); \ + printf("Total time passed: %ld.%06ld s\n", diff.tv_sec, diff.tv_usec); \ + osmo_timers_prepare(); \ + osmo_timers_update(); \ +} while (0) + +void fake_time_start() +{ + struct timespec *clock_override; + + osmo_gettimeofday_override_time = fake_time_start_time; + osmo_gettimeofday_override = true; + clock_override = osmo_clock_override_gettimespec(CLOCK_MONOTONIC); + OSMO_ASSERT(clock_override); + clock_override->tv_sec = fake_time_start_time.tv_sec; + clock_override->tv_nsec = fake_time_start_time.tv_usec * 1000; + osmo_clock_override_enable(CLOCK_MONOTONIC, true); + fake_time_passes(0, 0); +} + +static void print_fsm_state(struct osmo_fsm_inst *fi) +{ + struct timeval remaining; + printf("state=%s T=%d", osmo_fsm_inst_state_name(fi), fi->T); + + if (!osmo_timer_pending(&fi->timer)) { + printf(", no timeout\n"); + return; + } + + osmo_timer_remaining(&fi->timer, &osmo_gettimeofday_override_time, &remaining); + printf(", %lu.%06lu s remaining\n", remaining.tv_sec, remaining.tv_usec); +} + + +#define test_tdef_fsm_state_chg(NEXT_STATE) do { \ + const struct osmo_tdef_state_timeout *st = osmo_tdef_get_state_timeout(NEXT_STATE, \ + test_tdef_state_timeouts); \ + if (!st) { \ + printf(" --> %s (no timer configured for this state)\n", \ + osmo_fsm_state_name(&test_tdef_fsm, NEXT_STATE)); \ + } else { \ + struct osmo_tdef *t = osmo_tdef_get_entry(tdefs, st->T); \ + int rc = osmo_tdef_fsm_inst_state_chg(fi, NEXT_STATE, test_tdef_state_timeouts, tdefs, 999); \ + printf(" --> %s (configured as T%d%s %lu %s) rc=%d;\t", osmo_fsm_state_name(&test_tdef_fsm, \ + NEXT_STATE), \ + st->T, st->keep_timer ? "(keep_timer)" : "", \ + t? t->val : -1, t? osmo_tdef_unit_name(t->unit) : "-", \ + rc); \ + print_fsm_state(fi); \ + } \ + } while(0) + + + +static void test_tdef_state_timeout(bool test_range) +{ + struct osmo_fsm_inst *fi; + struct osmo_tdef *m = osmo_tdef_get_entry(tdefs, INT_MAX); + unsigned long m_secs; + printf("\n%s()\n", __func__); + + osmo_tdefs_reset(tdefs); + + fake_time_start(); + + fi = osmo_fsm_inst_alloc(&test_tdef_fsm, ctx, NULL, LOGL_DEBUG, __func__); + OSMO_ASSERT(fi); + print_fsm_state(fi); + + test_tdef_fsm_state_chg(S_A); + test_tdef_fsm_state_chg(S_B); + test_tdef_fsm_state_chg(S_C); + test_tdef_fsm_state_chg(S_D); + + test_tdef_fsm_state_chg(S_G); + test_tdef_fsm_state_chg(S_H); + test_tdef_fsm_state_chg(S_I); + test_tdef_fsm_state_chg(S_J); + + printf("- test keep_timer:\n"); + fake_time_passes(123, 45678); + print_fsm_state(fi); + test_tdef_fsm_state_chg(S_K); + test_tdef_fsm_state_chg(S_A); + fake_time_passes(23, 45678); + print_fsm_state(fi); + test_tdef_fsm_state_chg(S_K); + + test_tdef_fsm_state_chg(S_A); + fake_time_passes(23, 45678); + print_fsm_state(fi); + test_tdef_fsm_state_chg(S_L); + + printf("- test large T:\n"); + test_tdef_fsm_state_chg(S_M); + + printf("- test T<0:\n"); + test_tdef_fsm_state_chg(S_N); + + printf("- test T=0:\n"); + test_tdef_fsm_state_chg(S_O); + + printf("- test no timer:\n"); + test_tdef_fsm_state_chg(S_X); + + printf("- test undefined timer, using default_val arg of osmo_tdef_fsm_inst_state_chg(), here passed as 999:\n"); + test_tdef_fsm_state_chg(S_Y); + + /* the range of unsigned long is architecture dependent. This test can be invoked manually to see whether + * clamping the timeout values works, but the output will be of varying lengths depending on the system's + * unsigned long range, and would cause differences in expected output. */ + if (test_range) { + printf("- test range:\n"); + test_tdef_fsm_state_chg(S_M); + /* sweep through all the bits, shifting in 0xfffff.. from the right. */ + m_secs = 0; + do { + m_secs = (m_secs << 1) + 1; + switch (m_secs) { + case 0x7fff: + printf("--- int32_t max ---\n"); + break; + case 0xffff: + printf("--- uint32_t max ---\n"); + break; + case 0x7fffffff: + printf("--- int64_t max ---\n"); + break; + case 0xffffffff: + printf("--- uint64_t max ---\n"); + break; + default: + break; + } + + m->val = m_secs - 1; + test_tdef_fsm_state_chg(S_M); + m->val = m_secs; + test_tdef_fsm_state_chg(S_M); + m->val = m_secs + 1; + test_tdef_fsm_state_chg(S_M); + } while (m_secs < ULONG_MAX); + } + + printf("- test disallowed transition:\n"); + test_tdef_fsm_state_chg(S_Z); + test_tdef_fsm_state_chg(S_B); + test_tdef_fsm_state_chg(S_C); + test_tdef_fsm_state_chg(S_D); +} + +int main(int argc, char **argv) +{ + ctx = talloc_named_const(NULL, 0, "tdef_test.c"); + osmo_init_logging2(ctx, NULL); + + log_set_print_filename(osmo_stderr_target, 0); + log_set_print_category(osmo_stderr_target, 1); + log_set_use_color(osmo_stderr_target, 0); + + osmo_fsm_register(&test_tdef_fsm); + + test_tdef_get(); + test_tdef_get_nonexisting(); + test_tdef_set_and_get(); + /* Run range test iff any argument is passed on the cmdline. For the rationale, see the comment in + * test_tdef_state_timeout(). */ + test_tdef_state_timeout(argc > 1); + + return EXIT_SUCCESS; +} diff --git a/tests/tdef/tdef_test.ok b/tests/tdef/tdef_test.ok new file mode 100644 index 00000000..cf4b77f5 --- /dev/null +++ b/tests/tdef/tdef_test.ok @@ -0,0 +1,184 @@ + +test_tdef_get() +T1=100s +osmo_tdef_get(1, s) = 100 +osmo_tdef_get(1, ms) = 100000 +osmo_tdef_get(1, m) = 2 +osmo_tdef_get(1, custom-unit) = 100 +T2=100ms +osmo_tdef_get(2, s) = 1 +osmo_tdef_get(2, ms) = 100 +osmo_tdef_get(2, m) = 1 +osmo_tdef_get(2, custom-unit) = 100 +T3=100m +osmo_tdef_get(3, s) = 6000 +osmo_tdef_get(3, ms) = 6000000 +osmo_tdef_get(3, m) = 100 +osmo_tdef_get(3, custom-unit) = 100 +T4=100custom-unit +osmo_tdef_get(4, s) = 100 +osmo_tdef_get(4, ms) = 100 +osmo_tdef_get(4, m) = 100 +osmo_tdef_get(4, custom-unit) = 100 +T7=50s +osmo_tdef_get(7, s) = 50 +osmo_tdef_get(7, ms) = 50000 +osmo_tdef_get(7, m) = 1 +osmo_tdef_get(7, custom-unit) = 50 +T8=300s +osmo_tdef_get(8, s) = 300 +osmo_tdef_get(8, ms) = 300000 +osmo_tdef_get(8, m) = 5 +osmo_tdef_get(8, custom-unit) = 300 +T9=5m +osmo_tdef_get(9, s) = 300 +osmo_tdef_get(9, ms) = 300000 +osmo_tdef_get(9, m) = 5 +osmo_tdef_get(9, custom-unit) = 5 +T10=20m +osmo_tdef_get(10, s) = 1200 +osmo_tdef_get(10, ms) = 1200000 +osmo_tdef_get(10, m) = 20 +osmo_tdef_get(10, custom-unit) = 20 +T1000=2000ms +osmo_tdef_get(1000, s) = 2 +osmo_tdef_get(1000, ms) = 2000 +osmo_tdef_get(1000, m) = 1 +osmo_tdef_get(1000, custom-unit) = 2000 +T1001=60000ms +osmo_tdef_get(1001, s) = 60 +osmo_tdef_get(1001, ms) = 60000 +osmo_tdef_get(1001, m) = 1 +osmo_tdef_get(1001, custom-unit) = 60000 +T1002=307445734561825860m +osmo_tdef_get(1002, s) = 18446744073709551600 +osmo_tdef_get(1002, ms) = 18446744073709551615 +osmo_tdef_get(1002, m) = 307445734561825860 +osmo_tdef_get(1002, custom-unit) = 307445734561825860 +T1003=18446744073709551615m +osmo_tdef_get(1003, s) = 18446744073709551615 +osmo_tdef_get(1003, ms) = 18446744073709551615 +osmo_tdef_get(1003, m) = 18446744073709551615 +osmo_tdef_get(1003, custom-unit) = 18446744073709551615 +T1004=1ms +osmo_tdef_get(1004, s) = 1 +osmo_tdef_get(1004, ms) = 1 +osmo_tdef_get(1004, m) = 1 +osmo_tdef_get(1004, custom-unit) = 1 +T1005=0ms +osmo_tdef_get(1005, s) = 0 +osmo_tdef_get(1005, ms) = 0 +osmo_tdef_get(1005, m) = 0 +osmo_tdef_get(1005, custom-unit) = 0 +T1006=0s +osmo_tdef_get(1006, s) = 0 +osmo_tdef_get(1006, ms) = 0 +osmo_tdef_get(1006, m) = 0 +osmo_tdef_get(1006, custom-unit) = 0 +T1007=0m +osmo_tdef_get(1007, s) = 0 +osmo_tdef_get(1007, ms) = 0 +osmo_tdef_get(1007, m) = 0 +osmo_tdef_get(1007, custom-unit) = 0 +T1008=0custom-unit +osmo_tdef_get(1008, s) = 0 +osmo_tdef_get(1008, ms) = 0 +osmo_tdef_get(1008, m) = 0 +osmo_tdef_get(1008, custom-unit) = 0 +T2147483647=18446744073709551615s +osmo_tdef_get(2147483647, s) = 18446744073709551615 +osmo_tdef_get(2147483647, ms) = 18446744073709551615 +osmo_tdef_get(2147483647, m) = 307445734561825861 +osmo_tdef_get(2147483647, custom-unit) = 18446744073709551615 +T2147483646=18446744073709551614s +osmo_tdef_get(2147483646, s) = 18446744073709551614 +osmo_tdef_get(2147483646, ms) = 18446744073709551615 +osmo_tdef_get(2147483646, m) = 307445734561825861 +osmo_tdef_get(2147483646, custom-unit) = 18446744073709551614 +T2147483645=9223372036854775807s +osmo_tdef_get(2147483645, s) = 9223372036854775807 +osmo_tdef_get(2147483645, ms) = 18446744073709551615 +osmo_tdef_get(2147483645, m) = 153722867280912931 +osmo_tdef_get(2147483645, custom-unit) = 9223372036854775807 +T2147483644=18446744073709551615m +osmo_tdef_get(2147483644, s) = 18446744073709551615 +osmo_tdef_get(2147483644, ms) = 18446744073709551615 +osmo_tdef_get(2147483644, m) = 18446744073709551615 +osmo_tdef_get(2147483644, custom-unit) = 18446744073709551615 +T-2147483648=18446744073709551615s +osmo_tdef_get(-2147483648, s) = 18446744073709551615 +osmo_tdef_get(-2147483648, ms) = 18446744073709551615 +osmo_tdef_get(-2147483648, m) = 307445734561825861 +osmo_tdef_get(-2147483648, custom-unit) = 18446744073709551615 +T0=1custom-unit +osmo_tdef_get(0, s) = 1 +osmo_tdef_get(0, ms) = 1 +osmo_tdef_get(0, m) = 1 +osmo_tdef_get(0, custom-unit) = 1 +T123=1s +osmo_tdef_get(123, s) = 1 +osmo_tdef_get(123, ms) = 1000 +osmo_tdef_get(123, m) = 1 +osmo_tdef_get(123, custom-unit) = 1 + +test_tdef_get_nonexisting() +osmo_tdef_get(tdefs, 5, s, 999) = 999 +osmo_tdef_get(tdefs, 5, ms, 999) = 999 +osmo_tdef_get(tdefs, 5, m, 999) = 999 +osmo_tdef_get(tdefs, 5, custom-unit, 999) = 999 + +test_tdef_set_and_get() +setting 7 = 42 +T7=42s(def=50) +osmo_tdef_get(7, ms) = 42000 +osmo_tdef_get(7, s) = 42 +osmo_tdef_get(7, m) = 1 +osmo_tdef_get(7, custom-unit) = 42 +setting 7 = 420 +T7=420s(def=50) +osmo_tdef_get(7, ms) = 420000 +osmo_tdef_get(7, s) = 420 +osmo_tdef_get(7, m) = 7 +osmo_tdef_get(7, custom-unit) = 420 +resetting +T7=50s +osmo_tdef_get(7, s) = 50 + +test_tdef_state_timeout() +Total time passed: 0.000000 s +state=A T=0, no timeout + --> A (configured as T1 100 s) rc=0; state=A T=1, 100.000000 s remaining + --> B (configured as T2 100 ms) rc=0; state=B T=2, 1.000000 s remaining + --> C (configured as T3 100 m) rc=0; state=C T=3, 6000.000000 s remaining + --> D (configured as T4 100 custom-unit) rc=0; state=D T=4, 100.000000 s remaining + --> G (configured as T7 50 s) rc=0; state=G T=7, 50.000000 s remaining + --> H (configured as T8 300 s) rc=0; state=H T=8, 300.000000 s remaining + --> I (configured as T9 5 m) rc=0; state=I T=9, 300.000000 s remaining + --> J (configured as T10 20 m) rc=0; state=J T=10, 1200.000000 s remaining +- test keep_timer: +Total time passed: 123.045678 s +state=J T=10, 1076.954322 s remaining + --> K (configured as T0(keep_timer) 1 custom-unit) rc=0; state=K T=10, 1076.954322 s remaining + --> A (configured as T1 100 s) rc=0; state=A T=1, 100.000000 s remaining +Total time passed: 146.091356 s +state=A T=1, 76.954322 s remaining + --> K (configured as T0(keep_timer) 1 custom-unit) rc=0; state=K T=1, 76.954322 s remaining + --> A (configured as T1 100 s) rc=0; state=A T=1, 100.000000 s remaining +Total time passed: 169.137034 s +state=A T=1, 76.954322 s remaining + --> L (configured as T123(keep_timer) 1 s) rc=0; state=L T=123, 76.954322 s remaining +- test large T: + --> M (configured as T2147483647 18446744073709551615 s) rc=0; state=M T=2147483647, 2147483647.000000 s remaining +- test T<0: + --> N (configured as T-2147483648 18446744073709551615 s) rc=0; state=N T=-2147483648, 2147483647.000000 s remaining +- test T=0: + --> O (no timer configured for this state) +- test no timer: + --> X (no timer configured for this state) +- test undefined timer, using default_val arg of osmo_tdef_fsm_inst_state_chg(), here passed as 999: + --> Y (configured as T666 18446744073709551615 -) rc=0; state=Y T=666, 999.000000 s remaining +- test disallowed transition: + --> Z (no timer configured for this state) + --> B (configured as T2 100 ms) rc=0; state=B T=2, 1.000000 s remaining + --> C (configured as T3 100 m) rc=0; state=C T=3, 6000.000000 s remaining + --> D (configured as T4 100 custom-unit) rc=0; state=D T=4, 100.000000 s remaining diff --git a/tests/tdef/tdef_vty_test_config_root.c b/tests/tdef/tdef_vty_test_config_root.c new file mode 100644 index 00000000..138ac00a --- /dev/null +++ b/tests/tdef/tdef_vty_test_config_root.c @@ -0,0 +1,292 @@ +/* Test implementation for osmo_tdef VTY configuration API. */ +/* + * (C) 2019 by sysmocom s.f.m.c. GmbH + * + * All Rights Reserved + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Author: Neels Hofmeyr + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#define _GNU_SOURCE +#include +#include +#include +#include + +#include + +#include +#include +#include + +#include +#include + +#include + +#include "config.h" + +/* ------------------- HERE IS THE INTERESTING TDEF RELEVANT PART ------------------- */ + +/* This example keeps several separate timer groups and offers 'timer' VTY commands at the root of the config node. See + * the tdef_vty_test_config_root.vty transcript test. + */ + +static struct osmo_tdef tdefs_test[] = { + { .T=1, .default_val=100, .desc="Testing a hundred seconds" }, // default is .unit=OSMO_TDEF_S == 0 + { .T=2, .default_val=100, .unit=OSMO_TDEF_MS, .desc="Testing a hundred milliseconds" }, + { .T=3, .default_val=100, .unit=OSMO_TDEF_M, .desc="Testing a hundred minutes" }, + { .T=4, .default_val=100, .unit=OSMO_TDEF_CUSTOM, .desc="Testing a hundred potatoes" }, + { .T=INT_MAX, .default_val=ULONG_MAX, .unit=OSMO_TDEF_M, .desc="Very large" }, + { .T=-23, .default_val=-15, .desc="Negative T number" }, + {} // <-- important! last entry shall be zero +}; + +static struct osmo_tdef tdefs_tea[] = { + { .T=1, .default_val=50, .desc="Water Boiling Timeout" }, + { .T=2, .default_val=300, .desc="Tea brewing" }, + { .T=3, .default_val=5, .unit=OSMO_TDEF_M, .desc="Let tea cool down before drinking" }, + { .T=4, .default_val=20, .unit=OSMO_TDEF_M, .desc="Forgot to drink tea while it's warm" }, + {} +}; + +static struct osmo_tdef tdefs_software[] = { + { .T=1, .default_val=30, .unit=OSMO_TDEF_M, .desc="Write code" }, + { .T=2, .default_val=20, .unit=OSMO_TDEF_MS, .desc="Hit segfault" }, + { .T=3, .default_val=480, .unit=OSMO_TDEF_M, .desc="Fix bugs" }, + {} +}; + +static struct osmo_tdef_group tdef_groups[] = { + { + .name = "tea", + .desc = "Tea time", + .tdefs = tdefs_tea, + }, + { + .name = "test", + .desc = "Test timers", + .tdefs = tdefs_test, + }, + { + .name = "software", + .desc = "Typical software development cycle", + .tdefs = tdefs_software, + }, + {} +}; + +enum tdef_vty_test_nodes { + TIMER_NODE = _LAST_OSMOVTY_NODE + 1, +}; + +/* This example puts 'timer' configuration commands directly at the root of the CONFIG_NODE. + * This TIMER_NODE is merely needed as a hook for the vty_write() command, but becomes an empty node in the VTY docs. + * It is possible to cheat around needing this if you choose to config_write_timer() in another root nodes' write cb. + * Another example using a 'network' subnode is \ref tdef_vty_test_config_subnode.c */ +static struct cmd_node timer_node = { + TIMER_NODE, + "%s(config-timer)# ", + 1, +}; + +static int config_write_timer(struct vty *vty) +{ + osmo_tdef_vty_groups_write(vty, ""); + return CMD_SUCCESS; +} + +static void timer_init_vty() +{ + /* Again, this is merely to get a vty write hook, see above. */ + install_node(&timer_node, config_write_timer); + + osmo_tdef_vty_groups_init(CONFIG_NODE, tdef_groups); +} + +/* ------------------- THE REST is just boilerplate osmo main() ------------------- */ + +void *root_ctx = NULL; + +static void print_help() +{ + printf( "options:\n" + " -h --help this text\n" + " -d --debug MASK Enable debugging (e.g. -d DRSL:DOML:DLAPDM)\n" + " -D --daemonize For the process into a background daemon\n" + " -c --config-file Specify the filename of the config file\n" + " -s --disable-color Don't use colors in stderr log output\n" + " -T --timestamp Prefix every log line with a timestamp\n" + " -V --version Print version information and exit\n" + " -e --log-level Set a global log-level\n" + ); +} + +static struct { + const char *config_file; + int daemonize; +} cmdline_config = {}; + +static void handle_options(int argc, char **argv) +{ + while (1) { + int option_idx = 0, c; + static const struct option long_options[] = { + { "help", 0, 0, 'h' }, + { "debug", 1, 0, 'd' }, + { "daemonize", 0, 0, 'D' }, + { "config-file", 1, 0, 'c' }, + { "disable-color", 0, 0, 's' }, + { "timestamp", 0, 0, 'T' }, + { "version", 0, 0, 'V' }, + { "log-level", 1, 0, 'e' }, + {} + }; + + c = getopt_long(argc, argv, "hc:d:Dc:sTVe:", + long_options, &option_idx); + if (c == -1) + break; + + switch (c) { + case 'h': + print_help(); + exit(0); + case 's': + log_set_use_color(osmo_stderr_target, 0); + break; + case 'd': + log_parse_category_mask(osmo_stderr_target, optarg); + break; + case 'D': + cmdline_config.daemonize = 1; + break; + case 'c': + cmdline_config.config_file = optarg; + break; + case 'T': + log_set_print_timestamp(osmo_stderr_target, 1); + break; + case 'e': + log_set_log_level(osmo_stderr_target, atoi(optarg)); + break; + case 'V': + print_version(1); + exit(0); + break; + default: + /* catch unknown options *as well as* missing arguments. */ + fprintf(stderr, "Error in command line options. Exiting.\n"); + exit(-1); + } + } +} + +static int quit = 0; + +static void signal_handler(int signal) +{ + fprintf(stdout, "signal %u received\n", signal); + + switch (signal) { + case SIGINT: + case SIGTERM: + quit++; + break; + case SIGABRT: + osmo_generate_backtrace(); + /* in case of abort, we want to obtain a talloc report + * and then return to the caller, who will abort the process */ + case SIGUSR1: + talloc_report(tall_vty_ctx, stderr); + talloc_report_full(root_ctx, stderr); + break; + case SIGUSR2: + talloc_report_full(tall_vty_ctx, stderr); + break; + default: + break; + } +} + +static struct vty_app_info vty_info = { + .name = "tdef_vty_test", + .version = PACKAGE_VERSION, +}; + +static const struct log_info_cat default_categories[] = {}; + +const struct log_info log_info = { + .cat = default_categories, + .num_cat = ARRAY_SIZE(default_categories), +}; + +int main(int argc, char **argv) +{ + int rc; + + root_ctx = talloc_named_const(NULL, 0, "tdef_vty_test"); + + osmo_init_logging2(root_ctx, &log_info); + + vty_info.tall_ctx = root_ctx; + vty_init(&vty_info); + osmo_talloc_vty_add_cmds(); + + timer_init_vty(); /* <---- the only tdef relevant init */ + + handle_options(argc, argv); + + if (cmdline_config.config_file) { + rc = vty_read_config_file(cmdline_config.config_file, NULL); + if (rc < 0) { + fprintf(stderr, "Failed to parse the config file: '%s'\n", cmdline_config.config_file); + return 1; + } + } + + rc = telnet_init_dynif(root_ctx, NULL, vty_get_bind_addr(), 42042); + if (rc < 0) + return 2; + + signal(SIGINT, &signal_handler); + signal(SIGTERM, &signal_handler); + signal(SIGABRT, &signal_handler); + signal(SIGUSR1, &signal_handler); + signal(SIGUSR2, &signal_handler); + osmo_init_ignore_signals(); + + if (cmdline_config.daemonize) { + rc = osmo_daemonize(); + if (rc < 0) { + perror("Error during daemonize"); + return 6; + } + } + + while (!quit) { + log_reset_context(); + osmo_select_main(0); + } + + talloc_free(root_ctx); + talloc_free(tall_vty_ctx); + + return 0; +} diff --git a/tests/tdef/tdef_vty_test_config_root.vty b/tests/tdef/tdef_vty_test_config_root.vty new file mode 100644 index 00000000..12876a68 --- /dev/null +++ b/tests/tdef/tdef_vty_test_config_root.vty @@ -0,0 +1,292 @@ +tdef_vty_test> list +... + show timer [(tea|test|software)] [TNNNN] +... + +tdef_vty_test> show timer ? + [tea] Tea time + [test] Test timers + [software] Typical software development cycle + +tdef_vty_test> show timer test ? + [TNNNN] T-number, optionally preceded by 't' or 'T'. + +tdef_vty_test> show timer +tea: T1 = 50 s Water Boiling Timeout (default: 50 s) +tea: T2 = 300 s Tea brewing (default: 300 s) +tea: T3 = 5 m Let tea cool down before drinking (default: 5 m) +tea: T4 = 20 m Forgot to drink tea while it's warm (default: 20 m) +test: T1 = 100 s Testing a hundred seconds (default: 100 s) +test: T2 = 100 ms Testing a hundred milliseconds (default: 100 ms) +test: T3 = 100 m Testing a hundred minutes (default: 100 m) +test: T4 = 100 Testing a hundred potatoes (default: 100) +test: T2147483647 = 18446744073709551615 m Very large (default: 18446744073709551615 m) +test: T-23 = 18446744073709551601 s Negative T number (default: 18446744073709551601 s) +software: T1 = 30 m Write code (default: 30 m) +software: T2 = 20 ms Hit segfault (default: 20 ms) +software: T3 = 480 m Fix bugs (default: 480 m) + +tdef_vty_test> enable +tdef_vty_test# show timer +tea: T1 = 50 s Water Boiling Timeout (default: 50 s) +tea: T2 = 300 s Tea brewing (default: 300 s) +tea: T3 = 5 m Let tea cool down before drinking (default: 5 m) +tea: T4 = 20 m Forgot to drink tea while it's warm (default: 20 m) +test: T1 = 100 s Testing a hundred seconds (default: 100 s) +test: T2 = 100 ms Testing a hundred milliseconds (default: 100 ms) +test: T3 = 100 m Testing a hundred minutes (default: 100 m) +test: T4 = 100 Testing a hundred potatoes (default: 100) +test: T2147483647 = 18446744073709551615 m Very large (default: 18446744073709551615 m) +test: T-23 = 18446744073709551601 s Negative T number (default: 18446744073709551601 s) +software: T1 = 30 m Write code (default: 30 m) +software: T2 = 20 ms Hit segfault (default: 20 ms) +software: T3 = 480 m Fix bugs (default: 480 m) + +tdef_vty_test# configure terminal + +tdef_vty_test(config)# show running-config +... !timer + +tdef_vty_test(config)# list +... + timer [(tea|test|software)] [TNNNN] [(<0-2147483647>|default)] +... + +tdef_vty_test(config)# timer ? + [tea] Tea time + [test] Test timers + [software] Typical software development cycle + +tdef_vty_test(config)# timer sof T123 ? + [<0-2147483647>] New timer value + [default] Set to default timer value + +tdef_vty_test(config)# timer sof T123 ? + [<0-2147483647>] New timer value + [default] Set to default timer value + +tdef_vty_test(config)# timer test ? + [TNNNN] T-number, optionally preceded by 't' or 'T'. + +tdef_vty_test(config)# timer test t2 ? + [<0-2147483647>] New timer value + [default] Set to default timer value + +tdef_vty_test(config)# do show timer +tea: T1 = 50 s Water Boiling Timeout (default: 50 s) +tea: T2 = 300 s Tea brewing (default: 300 s) +tea: T3 = 5 m Let tea cool down before drinking (default: 5 m) +tea: T4 = 20 m Forgot to drink tea while it's warm (default: 20 m) +test: T1 = 100 s Testing a hundred seconds (default: 100 s) +test: T2 = 100 ms Testing a hundred milliseconds (default: 100 ms) +test: T3 = 100 m Testing a hundred minutes (default: 100 m) +test: T4 = 100 Testing a hundred potatoes (default: 100) +test: T2147483647 = 18446744073709551615 m Very large (default: 18446744073709551615 m) +test: T-23 = 18446744073709551601 s Negative T number (default: 18446744073709551601 s) +software: T1 = 30 m Write code (default: 30 m) +software: T2 = 20 ms Hit segfault (default: 20 ms) +software: T3 = 480 m Fix bugs (default: 480 m) + +tdef_vty_test(config)# do show timer tea +tea: T1 = 50 s Water Boiling Timeout (default: 50 s) +tea: T2 = 300 s Tea brewing (default: 300 s) +tea: T3 = 5 m Let tea cool down before drinking (default: 5 m) +tea: T4 = 20 m Forgot to drink tea while it's warm (default: 20 m) + +tdef_vty_test(config)# do show timer tea 2 +tea: T2 = 300 s Tea brewing (default: 300 s) + +tdef_vty_test(config)# do show timer tea t2 +tea: T2 = 300 s Tea brewing (default: 300 s) + +tdef_vty_test(config)# do show timer tea T2 +tea: T2 = 300 s Tea brewing (default: 300 s) + +tdef_vty_test(config)# do show timer tea T5 +% No such timer: T5 + +tdef_vty_test(config)# do show timer tea T0 +% No such timer: T0 + +tdef_vty_test(config)# do show timer tea T-123 +% No such timer: T-123 + +tdef_vty_test(config)# do show timer t +tea: T1 = 50 s Water Boiling Timeout (default: 50 s) +tea: T2 = 300 s Tea brewing (default: 300 s) +tea: T3 = 5 m Let tea cool down before drinking (default: 5 m) +tea: T4 = 20 m Forgot to drink tea while it's warm (default: 20 m) +test: T1 = 100 s Testing a hundred seconds (default: 100 s) +test: T2 = 100 ms Testing a hundred milliseconds (default: 100 ms) +test: T3 = 100 m Testing a hundred minutes (default: 100 m) +test: T4 = 100 Testing a hundred potatoes (default: 100) +test: T2147483647 = 18446744073709551615 m Very large (default: 18446744073709551615 m) +test: T-23 = 18446744073709551601 s Negative T number (default: 18446744073709551601 s) + +tdef_vty_test(config)# do show timer te +tea: T1 = 50 s Water Boiling Timeout (default: 50 s) +tea: T2 = 300 s Tea brewing (default: 300 s) +tea: T3 = 5 m Let tea cool down before drinking (default: 5 m) +tea: T4 = 20 m Forgot to drink tea while it's warm (default: 20 m) +test: T1 = 100 s Testing a hundred seconds (default: 100 s) +test: T2 = 100 ms Testing a hundred milliseconds (default: 100 ms) +test: T3 = 100 m Testing a hundred minutes (default: 100 m) +test: T4 = 100 Testing a hundred potatoes (default: 100) +test: T2147483647 = 18446744073709551615 m Very large (default: 18446744073709551615 m) +test: T-23 = 18446744073709551601 s Negative T number (default: 18446744073709551601 s) + +tdef_vty_test(config)# do show timer te T2 +tea: T2 = 300 s Tea brewing (default: 300 s) +test: T2 = 100 ms Testing a hundred milliseconds (default: 100 ms) + + +tdef_vty_test(config)# timer tea 3 30 +tdef_vty_test(config)# timer tea T3 +tea: T3 = 30 m Let tea cool down before drinking (default: 5 m) + +tdef_vty_test(config)# timer tea t3 31 +tdef_vty_test(config)# timer tea T3 +tea: T3 = 31 m Let tea cool down before drinking (default: 5 m) + +tdef_vty_test(config)# timer tea T3 32 +tdef_vty_test(config)# timer tea T3 +tea: T3 = 32 m Let tea cool down before drinking (default: 5 m) + +tdef_vty_test(config)# timer tea T-123 99 +% No such timer: T-123 + +tdef_vty_test(config)# timer tea T0 0 +% No such timer: T0 + +tdef_vty_test(config)# timer tea T123 default +% No such timer: T123 + +tdef_vty_test(config)# timer tea +tea: T1 = 50 s Water Boiling Timeout (default: 50 s) +tea: T2 = 300 s Tea brewing (default: 300 s) +tea: T3 = 32 m Let tea cool down before drinking (default: 5 m) +tea: T4 = 20 m Forgot to drink tea while it's warm (default: 20 m) + +tdef_vty_test(config)# timer t +tea: T1 = 50 s Water Boiling Timeout (default: 50 s) +tea: T2 = 300 s Tea brewing (default: 300 s) +tea: T3 = 32 m Let tea cool down before drinking (default: 5 m) +tea: T4 = 20 m Forgot to drink tea while it's warm (default: 20 m) +test: T1 = 100 s Testing a hundred seconds (default: 100 s) +test: T2 = 100 ms Testing a hundred milliseconds (default: 100 ms) +test: T3 = 100 m Testing a hundred minutes (default: 100 m) +test: T4 = 100 Testing a hundred potatoes (default: 100) +test: T2147483647 = 18446744073709551615 m Very large (default: 18446744073709551615 m) +test: T-23 = 18446744073709551601 s Negative T number (default: 18446744073709551601 s) + +tdef_vty_test(config)# timer te T2 +tea: T2 = 300 s Tea brewing (default: 300 s) +test: T2 = 100 ms Testing a hundred milliseconds (default: 100 ms) + +tdef_vty_test(config)# timer test T2 100 + +tdef_vty_test(config)# timer tes T2 100 +% Error: no timers found + +tdef_vty_test(config)# timer te T2 100 +% Error: no timers found + + +tdef_vty_test(config)# do show timer software +software: T1 = 30 m Write code (default: 30 m) +software: T2 = 20 ms Hit segfault (default: 20 ms) +software: T3 = 480 m Fix bugs (default: 480 m) + +tdef_vty_test(config)# do show timer software 1 +software: T1 = 30 m Write code (default: 30 m) + +tdef_vty_test(config)# do show timer software t1 +software: T1 = 30 m Write code (default: 30 m) + +tdef_vty_test(config)# do show timer software T1 +software: T1 = 30 m Write code (default: 30 m) + +tdef_vty_test(config)# do show timer software T99 +% No such timer: T99 + +tdef_vty_test(config)# do show timer software T-123123 +% No such timer: T-123123 + +tdef_vty_test(config)# do show timer software T0 +% No such timer: T0 + +tdef_vty_test(config)# timer software 1 11 +tdef_vty_test(config)# timer software T1 +software: T1 = 11 m Write code (default: 30 m) + +tdef_vty_test(config)# timer software t1 12 +tdef_vty_test(config)# timer software T1 +software: T1 = 12 m Write code (default: 30 m) + +tdef_vty_test(config)# timer software T1 13 +tdef_vty_test(config)# timer software T2 0 +tdef_vty_test(config)# timer software +software: T1 = 13 m Write code (default: 30 m) +software: T2 = 0 ms Hit segfault (default: 20 ms) +software: T3 = 480 m Fix bugs (default: 480 m) + +tdef_vty_test(config)# timer softw +software: T1 = 13 m Write code (default: 30 m) +software: T2 = 0 ms Hit segfault (default: 20 ms) +software: T3 = 480 m Fix bugs (default: 480 m) + +tdef_vty_test(config)# timer softw T3 +software: T3 = 480 m Fix bugs (default: 480 m) + +tdef_vty_test(config)# timer softw T3 23 +% Error: no timers found + +tdef_vty_test(config)# timer +tea: T1 = 50 s Water Boiling Timeout (default: 50 s) +tea: T2 = 300 s Tea brewing (default: 300 s) +tea: T3 = 32 m Let tea cool down before drinking (default: 5 m) +tea: T4 = 20 m Forgot to drink tea while it's warm (default: 20 m) +test: T1 = 100 s Testing a hundred seconds (default: 100 s) +test: T2 = 100 ms Testing a hundred milliseconds (default: 100 ms) +test: T3 = 100 m Testing a hundred minutes (default: 100 m) +test: T4 = 100 Testing a hundred potatoes (default: 100) +test: T2147483647 = 18446744073709551615 m Very large (default: 18446744073709551615 m) +test: T-23 = 18446744073709551601 s Negative T number (default: 18446744073709551601 s) +software: T1 = 13 m Write code (default: 30 m) +software: T2 = 0 ms Hit segfault (default: 20 ms) +software: T3 = 480 m Fix bugs (default: 480 m) + +tdef_vty_test(config)# do show timer +tea: T1 = 50 s Water Boiling Timeout (default: 50 s) +tea: T2 = 300 s Tea brewing (default: 300 s) +tea: T3 = 32 m Let tea cool down before drinking (default: 5 m) +tea: T4 = 20 m Forgot to drink tea while it's warm (default: 20 m) +test: T1 = 100 s Testing a hundred seconds (default: 100 s) +test: T2 = 100 ms Testing a hundred milliseconds (default: 100 ms) +test: T3 = 100 m Testing a hundred minutes (default: 100 m) +test: T4 = 100 Testing a hundred potatoes (default: 100) +test: T2147483647 = 18446744073709551615 m Very large (default: 18446744073709551615 m) +test: T-23 = 18446744073709551601 s Negative T number (default: 18446744073709551601 s) +software: T1 = 13 m Write code (default: 30 m) +software: T2 = 0 ms Hit segfault (default: 20 ms) +software: T3 = 480 m Fix bugs (default: 480 m) + +tdef_vty_test(config)# show running-config +... !timer +timer tea T3 32 +timer software T1 13 +timer software T2 0 +... !timer + +tdef_vty_test(config)# timer tea T3 default +tdef_vty_test(config)# timer software T1 default +tdef_vty_test(config)# show running-config +... !timer +timer software T2 0 +... !timer + +tdef_vty_test(config)# timer softw 2 default +% Error: no timers found +tdef_vty_test(config)# timer software 2 default +tdef_vty_test(config)# show running-config +... !timer diff --git a/tests/tdef/tdef_vty_test_config_subnode.c b/tests/tdef/tdef_vty_test_config_subnode.c new file mode 100644 index 00000000..c371c8d6 --- /dev/null +++ b/tests/tdef/tdef_vty_test_config_subnode.c @@ -0,0 +1,288 @@ +/* Test implementation for osmo_tdef VTY configuration API. */ +/* + * (C) 2019 by sysmocom s.f.m.c. GmbH + * + * All Rights Reserved + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Author: Neels Hofmeyr + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#define _GNU_SOURCE +#include +#include +#include +#include + +#include + +#include +#include +#include + +#include +#include + +#include + +#include "config.h" + +/* ------------------- HERE IS THE INTERESTING TDEF RELEVANT PART ------------------- */ + +/* This example keeps a single global timer group and offers a custom 'timer' VTY command in a 'network' subnode below + * the CONFIG_NODE. + * the tdef_vty_test_config_subnode.vty transcript test. + */ + +static struct osmo_tdef global_tdefs[] = { + { .T=1, .default_val=100, .desc="Testing a hundred seconds" }, // default is .unit=OSMO_TDEF_S == 0 + { .T=2, .default_val=100, .unit=OSMO_TDEF_MS, .desc="Testing a hundred milliseconds" }, + { .T=3, .default_val=100, .unit=OSMO_TDEF_M, .desc="Testing a hundred minutes" }, + { .T=4, .default_val=100, .unit=OSMO_TDEF_CUSTOM, .desc="Testing a hundred potatoes" }, + { .T=INT_MAX, .default_val=ULONG_MAX, .unit=OSMO_TDEF_M, .desc="Very large" }, + { .T=-23, .default_val=-15, .desc="Negative T number" }, + {} // <-- important! last entry shall be zero +}; + +enum tdef_vty_test_nodes { + GSMNET_NODE = _LAST_OSMOVTY_NODE + 1, +}; + +/* This example offers 'timer T123' commands within an "unrelated" already existing subnode. */ +static struct cmd_node gsmnet_node = { + GSMNET_NODE, + "%s(config-net)# ", + 1, +}; + +DEFUN(show_timer, show_timer_cmd, + "show timer " OSMO_TDEF_VTY_ARG_T_OPTIONAL, + SHOW_STR "Show timers\n" + OSMO_TDEF_VTY_DOC_T) +{ + const char *T_arg = argc > 0 ? argv[0] : NULL; + return osmo_tdef_vty_show_cmd(vty, global_tdefs, T_arg, NULL); +} + +DEFUN(cfg_net_timer, cfg_net_timer_cmd, + "timer " OSMO_TDEF_VTY_ARG_SET_OPTIONAL, + "Configure or show timers\n" + OSMO_TDEF_VTY_DOC_SET) +{ + /* If any arguments are missing, redirect to 'show' */ + if (argc < 2) + return show_timer(self, vty, argc, argv); + return osmo_tdef_vty_set_cmd(vty, global_tdefs, argv); +} + +DEFUN(cfg_net, cfg_net_cmd, + "network", "Enter network node\n") +{ + vty->node = GSMNET_NODE; + return CMD_SUCCESS; +} + +static int config_write_gsmnet(struct vty *vty) +{ + vty_out(vty, "net%s", VTY_NEWLINE); + /* usually, here would be the output of any other 'net' config items... */ + + osmo_tdef_vty_write(vty, global_tdefs, " timer "); + return CMD_SUCCESS; +} + +static void gsmnet_init_vty() +{ + install_node(&gsmnet_node, config_write_gsmnet); + install_element(CONFIG_NODE, &cfg_net_cmd); + + osmo_tdefs_reset(global_tdefs); + install_element_ve(&show_timer_cmd); + install_element(GSMNET_NODE, &cfg_net_timer_cmd); +} + +/* ------------------- THE REST is just boilerplate osmo main() ------------------- */ + +void *root_ctx = NULL; + +static void print_help() +{ + printf( "options:\n" + " -h --help this text\n" + " -d --debug MASK Enable debugging (e.g. -d DRSL:DOML:DLAPDM)\n" + " -D --daemonize For the process into a background daemon\n" + " -c --config-file Specify the filename of the config file\n" + " -s --disable-color Don't use colors in stderr log output\n" + " -T --timestamp Prefix every log line with a timestamp\n" + " -V --version Print version information and exit\n" + " -e --log-level Set a global log-level\n" + ); +} + +static struct { + const char *config_file; + int daemonize; +} cmdline_config = {}; + +static void handle_options(int argc, char **argv) +{ + while (1) { + int option_idx = 0, c; + static const struct option long_options[] = { + { "help", 0, 0, 'h' }, + { "debug", 1, 0, 'd' }, + { "daemonize", 0, 0, 'D' }, + { "config-file", 1, 0, 'c' }, + { "disable-color", 0, 0, 's' }, + { "timestamp", 0, 0, 'T' }, + { "version", 0, 0, 'V' }, + { "log-level", 1, 0, 'e' }, + {} + }; + + c = getopt_long(argc, argv, "hc:d:Dc:sTVe:", + long_options, &option_idx); + if (c == -1) + break; + + switch (c) { + case 'h': + print_help(); + exit(0); + case 's': + log_set_use_color(osmo_stderr_target, 0); + break; + case 'd': + log_parse_category_mask(osmo_stderr_target, optarg); + break; + case 'D': + cmdline_config.daemonize = 1; + break; + case 'c': + cmdline_config.config_file = optarg; + break; + case 'T': + log_set_print_timestamp(osmo_stderr_target, 1); + break; + case 'e': + log_set_log_level(osmo_stderr_target, atoi(optarg)); + break; + case 'V': + print_version(1); + exit(0); + break; + default: + /* catch unknown options *as well as* missing arguments. */ + fprintf(stderr, "Error in command line options. Exiting.\n"); + exit(-1); + } + } +} + +static int quit = 0; + +static void signal_handler(int signal) +{ + fprintf(stdout, "signal %u received\n", signal); + + switch (signal) { + case SIGINT: + case SIGTERM: + quit++; + break; + case SIGABRT: + osmo_generate_backtrace(); + /* in case of abort, we want to obtain a talloc report + * and then return to the caller, who will abort the process */ + case SIGUSR1: + talloc_report(tall_vty_ctx, stderr); + talloc_report_full(root_ctx, stderr); + break; + case SIGUSR2: + talloc_report_full(tall_vty_ctx, stderr); + break; + default: + break; + } +} + +static struct vty_app_info vty_info = { + .name = "tdef_vty_test", + .version = PACKAGE_VERSION, +}; + +static const struct log_info_cat default_categories[] = {}; + +const struct log_info log_info = { + .cat = default_categories, + .num_cat = ARRAY_SIZE(default_categories), +}; + +int main(int argc, char **argv) +{ + int rc; + + root_ctx = talloc_named_const(NULL, 0, "tdef_vty_test"); + + osmo_init_logging2(root_ctx, &log_info); + + vty_info.tall_ctx = root_ctx; + vty_init(&vty_info); + osmo_talloc_vty_add_cmds(); + + gsmnet_init_vty(); /* <--- relevant init for this example */ + + handle_options(argc, argv); + + if (cmdline_config.config_file) { + rc = vty_read_config_file(cmdline_config.config_file, NULL); + if (rc < 0) { + fprintf(stderr, "Failed to parse the config file: '%s'\n", cmdline_config.config_file); + return 1; + } + } + + rc = telnet_init_dynif(root_ctx, NULL, vty_get_bind_addr(), 42042); + if (rc < 0) + return 2; + + signal(SIGINT, &signal_handler); + signal(SIGTERM, &signal_handler); + signal(SIGABRT, &signal_handler); + signal(SIGUSR1, &signal_handler); + signal(SIGUSR2, &signal_handler); + osmo_init_ignore_signals(); + + if (cmdline_config.daemonize) { + rc = osmo_daemonize(); + if (rc < 0) { + perror("Error during daemonize"); + return 6; + } + } + + while (!quit) { + log_reset_context(); + osmo_select_main(0); + } + + talloc_free(root_ctx); + talloc_free(tall_vty_ctx); + + return 0; +} diff --git a/tests/tdef/tdef_vty_test_config_subnode.vty b/tests/tdef/tdef_vty_test_config_subnode.vty new file mode 100644 index 00000000..6cfd3bf3 --- /dev/null +++ b/tests/tdef/tdef_vty_test_config_subnode.vty @@ -0,0 +1,107 @@ +tdef_vty_test> list +... !timer + show timer [TNNNN] +... !timer + +tdef_vty_test> show timer ? + [TNNNN] T-number, optionally preceded by 't' or 'T'. + +tdef_vty_test> show timer +T1 = 100 s Testing a hundred seconds (default: 100 s) +T2 = 100 ms Testing a hundred milliseconds (default: 100 ms) +T3 = 100 m Testing a hundred minutes (default: 100 m) +T4 = 100 Testing a hundred potatoes (default: 100) +T2147483647 = 18446744073709551615 m Very large (default: 18446744073709551615 m) +T-23 = 18446744073709551601 s Negative T number (default: 18446744073709551601 s) + +tdef_vty_test> enable +tdef_vty_test# show timer +T1 = 100 s Testing a hundred seconds (default: 100 s) +T2 = 100 ms Testing a hundred milliseconds (default: 100 ms) +T3 = 100 m Testing a hundred minutes (default: 100 m) +T4 = 100 Testing a hundred potatoes (default: 100) +T2147483647 = 18446744073709551615 m Very large (default: 18446744073709551615 m) +T-23 = 18446744073709551601 s Negative T number (default: 18446744073709551601 s) + +tdef_vty_test# configure terminal +tdef_vty_test(config)# show running-config +... !timer + +tdef_vty_test(config)# network + +tdef_vty_test(config-net)# do show timer +T1 = 100 s Testing a hundred seconds (default: 100 s) +T2 = 100 ms Testing a hundred milliseconds (default: 100 ms) +T3 = 100 m Testing a hundred minutes (default: 100 m) +T4 = 100 Testing a hundred potatoes (default: 100) +T2147483647 = 18446744073709551615 m Very large (default: 18446744073709551615 m) +T-23 = 18446744073709551601 s Negative T number (default: 18446744073709551601 s) + +tdef_vty_test(config-net)# do show timer T3 +T3 = 100 m Testing a hundred minutes (default: 100 m) +tdef_vty_test(config-net)# do show timer 3 +T3 = 100 m Testing a hundred minutes (default: 100 m) +tdef_vty_test(config-net)# do show timer t3 +T3 = 100 m Testing a hundred minutes (default: 100 m) + +tdef_vty_test(config-net)# timer T1 5 +tdef_vty_test(config-net)# timer T1 +T1 = 5 s Testing a hundred seconds (default: 100 s) + +tdef_vty_test(config-net)# timer t1 678 +tdef_vty_test(config-net)# timer T1 +T1 = 678 s Testing a hundred seconds (default: 100 s) + +tdef_vty_test(config-net)# timer 1 9012345 +tdef_vty_test(config-net)# timer T1 +T1 = 9012345 s Testing a hundred seconds (default: 100 s) + +tdef_vty_test(config-net)# do show timer T666 +% No such timer: T666 +tdef_vty_test(config-net)# do show timer t666 +% No such timer: T666 +tdef_vty_test(config-net)# do show timer 666 +% No such timer: T666 + +tdef_vty_test(config-net)# timer T666 +% No such timer: T666 +tdef_vty_test(config-net)# timer t666 +% No such timer: T666 +tdef_vty_test(config-net)# timer 666 +% No such timer: T666 + +tdef_vty_test(config-net)# timer T666 5 +% No such timer: T666 + +tdef_vty_test(config-net)# timer T-23 42 +tdef_vty_test(config-net)# timer T-23 +T-23 = 42 s Negative T number (default: 18446744073709551601 s) + +tdef_vty_test(config-net)# timer t-23 43 +tdef_vty_test(config-net)# timer T-23 +T-23 = 43 s Negative T number (default: 18446744073709551601 s) + +tdef_vty_test(config-net)# timer -23 44 +tdef_vty_test(config-net)# timer T-23 +T-23 = 44 s Negative T number (default: 18446744073709551601 s) + +tdef_vty_test(config-net)# do show timer +T1 = 9012345 s Testing a hundred seconds (default: 100 s) +T2 = 100 ms Testing a hundred milliseconds (default: 100 ms) +T3 = 100 m Testing a hundred minutes (default: 100 m) +T4 = 100 Testing a hundred potatoes (default: 100) +T2147483647 = 18446744073709551615 m Very large (default: 18446744073709551615 m) +T-23 = 44 s Negative T number (default: 18446744073709551601 s) + +tdef_vty_test(config-net)# show running-config +... !timer +net + timer T1 9012345 + timer T-23 44 +... !timer + +tdef_vty_test(config-net)# timer T1 default +tdef_vty_test(config-net)# timer T-23 default + +tdef_vty_test(config-net)# show running-config +... !timer diff --git a/tests/tdef/tdef_vty_test_dynamic.c b/tests/tdef/tdef_vty_test_dynamic.c new file mode 100644 index 00000000..20dae535 --- /dev/null +++ b/tests/tdef/tdef_vty_test_dynamic.c @@ -0,0 +1,362 @@ +/* Test implementation for osmo_tdef VTY configuration API. */ +/* + * (C) 2019 by sysmocom s.f.m.c. GmbH + * + * All Rights Reserved + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Author: Neels Hofmeyr + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#define _GNU_SOURCE +#include +#include +#include +#include + +#include + +#include +#include +#include + +#include +#include + +#include + +#include "config.h" + +void *root_ctx = NULL; + +/* ------------------- HERE IS THE INTERESTING TDEF RELEVANT PART ------------------- */ + +/* This example keeps a separate list of timers for each instance of a dynamically allocated instance of a VTY node, + * for example of keeping separate timers for each BTS in a BSC. + */ + +static const struct osmo_tdef bts_default_tdefs[] = { + { .T=1111, .default_val=2, .desc="Dynamic Duo" }, + { .T=2222, .default_val=1, .desc="BATMAN" }, + { .T=3333, .default_val=12, .desc="Dadadadadadadadadadadada" }, + { .T=4444, .default_val=500, .unit=OSMO_TDEF_MS, .desc="POW!" }, + {} +}; + + +/* Boilerplate dynamic VTY node ... */ + +enum tdef_vty_test_nodes { + MEMBER_NODE = _LAST_OSMOVTY_NODE + 1, +}; + +static struct cmd_node member_node = { + MEMBER_NODE, + "%s(config-member)# ", + 1, +}; + +struct member { + struct llist_head entry; + char name[23]; + struct osmo_tdef *tdefs; +}; + +LLIST_HEAD(all_members); + +struct member *member_alloc(const char *name) +{ + struct member *m = talloc_zero(root_ctx, struct member); + osmo_strlcpy(m->name, name, sizeof(m->name)); + + /* DYNAMIC TDEF COPIES */ + m->tdefs = (struct osmo_tdef*)talloc_size(m, sizeof(bts_default_tdefs)); + memcpy((char*)m->tdefs, (char*)&bts_default_tdefs, sizeof(bts_default_tdefs)); + osmo_tdefs_reset(m->tdefs); + + llist_add_tail(&m->entry, &all_members); + return m; +} + +struct member *member_find(const char *name) +{ + struct member *m; + llist_for_each_entry(m, &all_members, entry) { + if (!strcmp(m->name, name)) + return m; + } + return NULL; +} + +DEFUN(cfg_member, cfg_member_cmd, + "member NAME", + "Enter member node\n" "Existing or new member node name\n") +{ + const char *name = argv[0]; + struct member *m = member_find(name); + if (!m) + m = member_alloc(name); + vty->index = m; + vty->node = MEMBER_NODE; + return CMD_SUCCESS; +} + + +/* TDEF SPECIFIC VTY */ + +static bool startswith(const char *str, const char *startswith_str) +{ + if (!startswith_str) + return true; + if (!str) + return false; + return strncmp(str, startswith_str, strlen(startswith_str)) == 0; +} + +DEFUN(show_timer, show_member_timer_cmd, + "show member-timer [NAME] " OSMO_TDEF_VTY_ARG_T_OPTIONAL, + SHOW_STR "Show timers for a specific member" "member name\n" + OSMO_TDEF_VTY_DOC_T) +{ + const char *name = argc > 0 ? argv[0] : NULL; + struct member *m; + const char *T_arg = argc > 1 ? argv[1] : NULL; + int shown = 0; + + llist_for_each_entry(m, &all_members, entry) { + if (!name || startswith(m->name, name)) { + osmo_tdef_vty_show_cmd(vty, m->tdefs, T_arg, "%11s: ", m->name); + shown ++; + } + } + if (!shown) { + vty_out(vty, "%% No such member: %s%s", name ? : "(none)", VTY_NEWLINE); + return CMD_WARNING; + } + return CMD_SUCCESS; +} + +DEFUN(cfg_member_timer, cfg_member_timer_cmd, + "timer " OSMO_TDEF_VTY_ARG_SET_OPTIONAL, + "Configure or show timers for this member\n" + OSMO_TDEF_VTY_DOC_SET) +{ + struct member *m = vty->index; + + if (!m || !m->tdefs) { + vty_out(vty, "%% No timers here%s", VTY_NEWLINE); + return CMD_WARNING; + } + + /* If any arguments are missing, redirect to 'show' */ + if (argc < 2) { + const char *T_arg = argc > 0 ? argv[0] : NULL; + return osmo_tdef_vty_show_cmd(vty, m->tdefs, T_arg, "%11s: ", m->name); + } + + return osmo_tdef_vty_set_cmd(vty, m->tdefs, argv); +} + +static int config_write_member(struct vty *vty) +{ + struct member *m; + llist_for_each_entry(m, &all_members, entry) { + vty_out(vty, "member %s%s", m->name, VTY_NEWLINE); + osmo_tdef_vty_write(vty, m->tdefs, " timer "); + } + + return CMD_SUCCESS; +} + +static void member_init_vty() +{ + install_node(&member_node, config_write_member); + install_element(CONFIG_NODE, &cfg_member_cmd); + + install_element_ve(&show_member_timer_cmd); + install_element(MEMBER_NODE, &cfg_member_timer_cmd); +} + +/* ------------------- THE REST is just boilerplate osmo main() ------------------- */ + +static void print_help() +{ + printf( "options:\n" + " -h --help this text\n" + " -d --debug MASK Enable debugging (e.g. -d DRSL:DOML:DLAPDM)\n" + " -D --daemonize For the process into a background daemon\n" + " -c --config-file Specify the filename of the config file\n" + " -s --disable-color Don't use colors in stderr log output\n" + " -T --timestamp Prefix every log line with a timestamp\n" + " -V --version Print version information and exit\n" + " -e --log-level Set a global log-level\n" + ); +} + +static struct { + const char *config_file; + int daemonize; +} cmdline_config = {}; + +static void handle_options(int argc, char **argv) +{ + while (1) { + int option_idx = 0, c; + static const struct option long_options[] = { + { "help", 0, 0, 'h' }, + { "debug", 1, 0, 'd' }, + { "daemonize", 0, 0, 'D' }, + { "config-file", 1, 0, 'c' }, + { "disable-color", 0, 0, 's' }, + { "timestamp", 0, 0, 'T' }, + { "version", 0, 0, 'V' }, + { "log-level", 1, 0, 'e' }, + {} + }; + + c = getopt_long(argc, argv, "hc:d:Dc:sTVe:", + long_options, &option_idx); + if (c == -1) + break; + + switch (c) { + case 'h': + print_help(); + exit(0); + case 's': + log_set_use_color(osmo_stderr_target, 0); + break; + case 'd': + log_parse_category_mask(osmo_stderr_target, optarg); + break; + case 'D': + cmdline_config.daemonize = 1; + break; + case 'c': + cmdline_config.config_file = optarg; + break; + case 'T': + log_set_print_timestamp(osmo_stderr_target, 1); + break; + case 'e': + log_set_log_level(osmo_stderr_target, atoi(optarg)); + break; + case 'V': + print_version(1); + exit(0); + break; + default: + /* catch unknown options *as well as* missing arguments. */ + fprintf(stderr, "Error in command line options. Exiting.\n"); + exit(-1); + } + } +} + +static int quit = 0; + +static void signal_handler(int signal) +{ + fprintf(stdout, "signal %u received\n", signal); + + switch (signal) { + case SIGINT: + case SIGTERM: + quit++; + break; + case SIGABRT: + osmo_generate_backtrace(); + /* in case of abort, we want to obtain a talloc report + * and then return to the caller, who will abort the process */ + case SIGUSR1: + talloc_report(tall_vty_ctx, stderr); + talloc_report_full(root_ctx, stderr); + break; + case SIGUSR2: + talloc_report_full(tall_vty_ctx, stderr); + break; + default: + break; + } +} + +static struct vty_app_info vty_info = { + .name = "tdef_vty_test", + .version = PACKAGE_VERSION, +}; + +static const struct log_info_cat default_categories[] = {}; + +const struct log_info log_info = { + .cat = default_categories, + .num_cat = ARRAY_SIZE(default_categories), +}; + +int main(int argc, char **argv) +{ + int rc; + + root_ctx = talloc_named_const(NULL, 0, "tdef_vty_test"); + + osmo_init_logging2(root_ctx, &log_info); + + vty_info.tall_ctx = root_ctx; + vty_init(&vty_info); + osmo_talloc_vty_add_cmds(); + + member_init_vty(); /* <--- relevant init for this example */ + + handle_options(argc, argv); + + if (cmdline_config.config_file) { + rc = vty_read_config_file(cmdline_config.config_file, NULL); + if (rc < 0) { + fprintf(stderr, "Failed to parse the config file: '%s'\n", cmdline_config.config_file); + return 1; + } + } + + rc = telnet_init_dynif(root_ctx, NULL, vty_get_bind_addr(), 42042); + if (rc < 0) + return 2; + + signal(SIGINT, &signal_handler); + signal(SIGTERM, &signal_handler); + signal(SIGABRT, &signal_handler); + signal(SIGUSR1, &signal_handler); + signal(SIGUSR2, &signal_handler); + osmo_init_ignore_signals(); + + if (cmdline_config.daemonize) { + rc = osmo_daemonize(); + if (rc < 0) { + perror("Error during daemonize"); + return 6; + } + } + + while (!quit) { + log_reset_context(); + osmo_select_main(0); + } + + talloc_free(root_ctx); + talloc_free(tall_vty_ctx); + + return 0; +} diff --git a/tests/tdef/tdef_vty_test_dynamic.vty b/tests/tdef/tdef_vty_test_dynamic.vty new file mode 100644 index 00000000..6aae746b --- /dev/null +++ b/tests/tdef/tdef_vty_test_dynamic.vty @@ -0,0 +1,83 @@ +tdef_vty_test> list +... + show member-timer [NAME] [TNNNN] +... + +tdef_vty_test> enable +tdef_vty_test# configure terminal + +tdef_vty_test(config)# member robin +tdef_vty_test(config-member)# timer + robin: T1111 = 2 s Dynamic Duo (default: 2 s) + robin: T2222 = 1 s BATMAN (default: 1 s) + robin: T3333 = 12 s Dadadadadadadadadadadada (default: 12 s) + robin: T4444 = 500 ms POW! (default: 500 ms) + +tdef_vty_test(config-member)# timer T2222 423 +tdef_vty_test(config-member)# timer T2222 + robin: T2222 = 423 s BATMAN (default: 1 s) + +tdef_vty_test(config-member)# timer + robin: T1111 = 2 s Dynamic Duo (default: 2 s) + robin: T2222 = 423 s BATMAN (default: 1 s) + robin: T3333 = 12 s Dadadadadadadadadadadada (default: 12 s) + robin: T4444 = 500 ms POW! (default: 500 ms) + +tdef_vty_test(config-member)# do show member-timer + robin: T1111 = 2 s Dynamic Duo (default: 2 s) + robin: T2222 = 423 s BATMAN (default: 1 s) + robin: T3333 = 12 s Dadadadadadadadadadadada (default: 12 s) + robin: T4444 = 500 ms POW! (default: 500 ms) + +tdef_vty_test(config-member)# exit + +tdef_vty_test(config)# member batman +tdef_vty_test(config-member)# timer 3333 17 +tdef_vty_test(config-member)# timer 3333 + batman: T3333 = 17 s Dadadadadadadadadadadada (default: 12 s) + +tdef_vty_test(config-member)# show running-config + +Current configuration: +... +member robin + timer T2222 423 +member batman + timer T3333 17 +... + +tdef_vty_test(config-member)# timer 3333 default + +tdef_vty_test(config-member)# show running-config +... +member robin + timer T2222 423 +member batman +... !timer + +tdef_vty_test(config-member)# exit +tdef_vty_test(config)# exit +tdef_vty_test# show member-timer + robin: T1111 = 2 s Dynamic Duo (default: 2 s) + robin: T2222 = 423 s BATMAN (default: 1 s) + robin: T3333 = 12 s Dadadadadadadadadadadada (default: 12 s) + robin: T4444 = 500 ms POW! (default: 500 ms) + batman: T1111 = 2 s Dynamic Duo (default: 2 s) + batman: T2222 = 1 s BATMAN (default: 1 s) + batman: T3333 = 12 s Dadadadadadadadadadadada (default: 12 s) + batman: T4444 = 500 ms POW! (default: 500 ms) + +tdef_vty_test# show member-timer batman + batman: T1111 = 2 s Dynamic Duo (default: 2 s) + batman: T2222 = 1 s BATMAN (default: 1 s) + batman: T3333 = 12 s Dadadadadadadadadadadada (default: 12 s) + batman: T4444 = 500 ms POW! (default: 500 ms) + +tdef_vty_test# show member-timer robin + robin: T1111 = 2 s Dynamic Duo (default: 2 s) + robin: T2222 = 423 s BATMAN (default: 1 s) + robin: T3333 = 12 s Dadadadadadadadadadadada (default: 12 s) + robin: T4444 = 500 ms POW! (default: 500 ms) + +tdef_vty_test# show member-timer joker +% No such member: joker diff --git a/tests/testsuite.at b/tests/testsuite.at index 6aaaa787..0093403a 100644 --- a/tests/testsuite.at +++ b/tests/testsuite.at @@ -325,3 +325,9 @@ AT_KEYWORDS([gsm23003]) cat $abs_srcdir/gsm23003/gsm23003_test.ok > expout AT_CHECK([$abs_top_builddir/tests/gsm23003/gsm23003_test], [0], [expout], [ignore]) AT_CLEANUP + +AT_SETUP([tdef]) +AT_KEYWORDS([tdef]) +cat $abs_srcdir/tdef/tdef_test.ok > expout +AT_CHECK([$abs_top_builddir/tests/tdef/tdef_test], [0], [expout], [ignore]) +AT_CLEANUP -- cgit v1.2.3