dect
/
linux-2.6
Archived
13
0
Fork 0
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
linux-2.6/drivers/scsi/isci/core/scic_sds_phy.h

492 lines
13 KiB
C

/*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _SCIC_SDS_PHY_H_
#define _SCIC_SDS_PHY_H_
/**
* This file contains the structures, constants and prototypes for the
* struct scic_sds_phy object.
*
*
*/
#include "intel_sata.h"
#include "intel_sas.h"
#include "sci_base_phy.h"
#include "scu_registers.h"
struct scic_sds_port;
/**
*
*
* This is the timeout value for the SATA phy to wait for a SIGNATURE FIS
* before restarting the starting state machine. Technically, the old parallel
* ATA specification required up to 30 seconds for a device to issue its
* signature FIS as a result of a soft reset. Now we see that devices respond
* generally within 15 seconds, but we'll use 25 for now.
*/
#define SCIC_SDS_SIGNATURE_FIS_TIMEOUT 25000
/**
*
*
* This is the timeout for the SATA OOB/SN because the hardware does not
* recognize a hot plug after OOB signal but before the SN signals. We need to
* make sure after a hotplug timeout if we have not received the speed event
* notification from the hardware that we restart the hardware OOB state
* machine.
*/
#define SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT 250
/**
* enum SCIC_SDS_PHY_STARTING_SUBSTATES -
*
*
*/
enum SCIC_SDS_PHY_STARTING_SUBSTATES {
/**
* Initial state
*/
SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL,
/**
* Wait state for the hardware OSSP event type notification
*/
SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN,
/**
* Wait state for the PHY speed notification
*/
SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN,
/**
* Wait state for the IAF Unsolicited frame notification
*/
SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF,
/**
* Wait state for the request to consume power
*/
SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER,
/**
* Wait state for request to consume power
*/
SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER,
/**
* Wait state for the SATA PHY notification
*/
SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN,
/**
* Wait for the SATA PHY speed notification
*/
SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN,
/**
* Wait state for the SIGNATURE FIS unsolicited frame notification
*/
SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF,
/**
* Exit state for this state machine
*/
SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL,
/**
* Maximum number of substates for the STARTING state machine
*/
SCIC_SDS_PHY_STARTING_MAX_SUBSTATES
};
struct scic_sds_port;
struct scic_sds_controller;
#ifdef SCIC_DEBUG_ENABLED
#define MAX_STATE_TRANSITION_RECORD (256)
/**
*
*
* Debug code to record the state transitions for the phy object
*/
struct scic_sds_phy_state_record {
struct sci_base_observer base_state_observer;
struct sci_base_observer starting_state_observer;
u16 index;
u32 state_transition_table[MAX_STATE_TRANSITION_RECORD];
};
#endif /* SCIC_DEBUG_ENABLED */
/**
* This enumeration provides a named phy type for the state machine
*
*
*/
enum SCIC_SDS_PHY_PROTOCOL {
/**
* This is an unknown phy type since there is either nothing on the other
* end or we have not detected the phy type as yet.
*/
SCIC_SDS_PHY_PROTOCOL_UNKNOWN,
/**
* This is a SAS PHY
*/
SCIC_SDS_PHY_PROTOCOL_SAS,
/**
* This is a SATA PHY
*/
SCIC_SDS_PHY_PROTOCOL_SATA,
SCIC_SDS_MAX_PHY_PROTOCOLS
};
/**
* struct scic_sds_phy - This structure contains or references all of the data
* necessary to represent the core phy object and SCU harware protocol
* engine.
*
*
*/
struct scic_sds_phy {
struct sci_base_phy parent;
/**
* This field specifies the port object that owns/contains this phy.
*/
struct scic_sds_port *owning_port;
/**
* This field indicates whether the phy supports 1.5 Gb/s, 3.0 Gb/s,
* or 6.0 Gb/s operation.
*/
enum sci_sas_link_rate max_negotiated_speed;
/**
* This member specifies the protocol being utilized on this phy. This
* field contains a legitamite value once the PHY has link trained with
* a remote phy.
*/
enum SCIC_SDS_PHY_PROTOCOL protocol;
/**
* This field specifies the index with which this phy is associated (0-3).
*/
u8 phy_index;
/**
* This member indicates if this particular PHY has received a BCN while
* it had no port assignement. This BCN will be reported once the phy is
* assigned to a port.
*/
bool bcn_received_while_port_unassigned;
/**
* This field indicates if this PHY is currently in the process of
* link training (i.e. it has started OOB, but has yet to perform
* IAF exchange/Signature FIS reception).
*/
bool is_in_link_training;
union {
struct {
struct sci_sas_identify_address_frame identify_address_frame_buffer;
} sas;
struct {
struct sata_fis_reg_d2h signature_fis_buffer;
} sata;
} phy_type;
/**
* This field contains a reference to the timer utilized in detecting
* when a signature FIS timeout has occurred. The signature FIS is the
* first FIS sent by an attached SATA device after OOB/SN.
*/
void *sata_timeout_timer;
struct scic_sds_phy_state_handler *state_handlers;
struct sci_base_state_machine starting_substate_machine;
#ifdef SCIC_DEBUG_ENABLED
struct scic_sds_phy_state_record state_record;
#endif /* SCIC_DEBUG_ENABLED */
/**
* This field points to the link layer register set within the SCU.
*/
struct scu_link_layer_registers *link_layer_registers;
};
typedef enum sci_status (*SCIC_SDS_PHY_EVENT_HANDLER_T)(struct scic_sds_phy *, u32);
typedef enum sci_status (*SCIC_SDS_PHY_FRAME_HANDLER_T)(struct scic_sds_phy *, u32);
typedef enum sci_status (*SCIC_SDS_PHY_POWER_HANDLER_T)(struct scic_sds_phy *);
/**
* struct scic_sds_phy_state_handler -
*
*
*/
struct scic_sds_phy_state_handler {
/**
* This is the struct sci_base_phy object state handlers.
*/
struct sci_base_phy_state_handler parent;
/**
* The state handler for unsolicited frames received from the SCU hardware.
*/
SCIC_SDS_PHY_FRAME_HANDLER_T frame_handler;
/**
* The state handler for events received from the SCU hardware.
*/
SCIC_SDS_PHY_EVENT_HANDLER_T event_handler;
/**
* The state handler for staggered spinup.
*/
SCIC_SDS_PHY_POWER_HANDLER_T consume_power_handler;
};
extern struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[];
extern const struct sci_base_state scic_sds_phy_state_table[];
extern const struct sci_base_state scic_sds_phy_starting_substates[];
extern struct scic_sds_phy_state_handler
scic_sds_phy_starting_substate_handler_table[];
/**
* scic_sds_phy_get_index() -
*
* This macro returns the phy index for the specified phy
*/
#define scic_sds_phy_get_index(phy) \
((phy)->phy_index)
/**
* scic_sds_phy_get_controller() - This macro returns the controller for this
* phy
*
*
*/
#define scic_sds_phy_get_controller(phy) \
(scic_sds_port_get_controller((phy)->owning_port))
/**
* scic_sds_phy_get_base_state_machine() - This macro returns the state machine
* for the base phy
*
*
*/
#define scic_sds_phy_get_base_state_machine(phy) \
(&(phy)->parent.state_machine)
/**
* scic_sds_phy_get_starting_substate_machine() - This macro returns the
* starting substate machine for this phy
*
*
*/
#define scic_sds_phy_get_starting_substate_machine(phy) \
(&(phy)->starting_substate_machine)
/**
* scic_sds_phy_set_state_handlers() - This macro sets the state handlers for
* this phy object
*
*
*/
#define scic_sds_phy_set_state_handlers(phy, handlers) \
((phy)->state_handlers = (handlers))
/**
* scic_sds_phy_set_base_state_handlers() -
*
* This macro set the base state handlers for the phy object.
*/
#define scic_sds_phy_set_base_state_handlers(phy, state_id) \
scic_sds_phy_set_state_handlers(\
(phy), \
&scic_sds_phy_state_handler_table[(state_id)] \
)
/**
* scic_sds_phy_is_ready() -
*
* This macro returns true if the current base state for this phy is
* SCI_BASE_PHY_STATE_READY
*/
#define scic_sds_phy_is_ready(phy) \
(\
SCI_BASE_PHY_STATE_READY \
== sci_base_state_machine_get_state(\
scic_sds_phy_get_base_state_machine(phy) \
) \
)
/* --------------------------------------------------------------------------- */
/* --------------------------------------------------------------------------- */
void scic_sds_phy_construct(
struct scic_sds_phy *this_phy,
struct scic_sds_port *owning_port,
u8 phy_index);
struct scic_sds_port *scic_sds_phy_get_port(
struct scic_sds_phy *this_phy);
void scic_sds_phy_set_port(
struct scic_sds_phy *this_phy,
struct scic_sds_port *owning_port);
enum sci_status scic_sds_phy_initialize(
struct scic_sds_phy *this_phy,
struct scu_link_layer_registers *link_layer_registers);
enum sci_status scic_sds_phy_start(
struct scic_sds_phy *this_phy);
enum sci_status scic_sds_phy_stop(
struct scic_sds_phy *this_phy);
enum sci_status scic_sds_phy_reset(
struct scic_sds_phy *this_phy);
/* --------------------------------------------------------------------------- */
void scic_sds_phy_suspend(
struct scic_sds_phy *this_phy);
void scic_sds_phy_resume(
struct scic_sds_phy *this_phy);
/* --------------------------------------------------------------------------- */
enum sci_status scic_sds_phy_event_handler(
struct scic_sds_phy *this_phy,
u32 event_code);
enum sci_status scic_sds_phy_frame_handler(
struct scic_sds_phy *this_phy,
u32 frame_index);
enum sci_status scic_sds_phy_consume_power_handler(
struct scic_sds_phy *this_phy);
void scic_sds_phy_get_sas_address(
struct scic_sds_phy *this_phy,
struct sci_sas_address *sas_address);
void scic_sds_phy_get_attached_sas_address(
struct scic_sds_phy *this_phy,
struct sci_sas_address *sas_address);
void scic_sds_phy_get_protocols(
struct scic_sds_phy *this_phy,
struct sci_sas_identify_address_frame_protocols *protocols);
void scic_sds_phy_get_attached_phy_protocols(
struct scic_sds_phy *this_phy,
struct sci_sas_identify_address_frame_protocols *protocols);
/*
* ****************************************************************************-
* * SCIC SDS PHY Handler Methods
* ****************************************************************************- */
enum sci_status scic_sds_phy_default_start_handler(
struct sci_base_phy *phy);
enum sci_status scic_sds_phy_default_stop_handler(
struct sci_base_phy *phy);
enum sci_status scic_sds_phy_default_reset_handler(
struct sci_base_phy *phy);
enum sci_status scic_sds_phy_default_destroy_handler(
struct sci_base_phy *phy);
enum sci_status scic_sds_phy_default_frame_handler(
struct scic_sds_phy *phy,
u32 frame_index);
enum sci_status scic_sds_phy_default_event_handler(
struct scic_sds_phy *phy,
u32 evnet_code);
enum sci_status scic_sds_phy_default_consume_power_handler(
struct scic_sds_phy *phy);
#endif /* _SCIC_SDS_PHY_H_ */