475 lines
18 KiB
C
475 lines
18 KiB
C
/*
|
|
* This file is provided under a dual BSD/GPLv2 license. When using or
|
|
* redistributing this file, you may do so under either license.
|
|
*
|
|
* GPL LICENSE SUMMARY
|
|
*
|
|
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
|
|
* The full GNU General Public License is included in this distribution
|
|
* in the file called LICENSE.GPL.
|
|
*
|
|
* BSD LICENSE
|
|
*
|
|
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* * Neither the name of Intel Corporation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/**
|
|
* This file defines all of the SCSI related constants, enumerations, and
|
|
* types. Please note that this file does not necessarily contain an
|
|
* exhaustive list of all constants, commands, sub-commands, etc.
|
|
*
|
|
*
|
|
*/
|
|
|
|
#ifndef _SCSI_H__
|
|
#define _SCSI_H__
|
|
|
|
|
|
/*
|
|
* ******************************************************************************
|
|
* * C O N S T A N T S A N D M A C R O S
|
|
* ****************************************************************************** */
|
|
|
|
/**
|
|
* enum _SCSI_TASK_MGMT_REQUEST_CODES - This enumberation contains the
|
|
* constants to be used for SCSI task management request codes. SAM does
|
|
* not specify any particular values for these codes so constants used here
|
|
* are the same as those specified in SAS.
|
|
*
|
|
*
|
|
*/
|
|
enum scsi_task_mgmt_request_codes {
|
|
SCSI_TASK_REQUEST_ABORT_TASK = 0x01,
|
|
SCSI_TASK_REQUEST_ABORT_TASK_SET = 0x02,
|
|
SCSI_TASK_REQUEST_CLEAR_TASK_SET = 0x04,
|
|
SCSI_TASK_REQUEST_LOGICAL_UNIT_RESET = 0x08,
|
|
SCSI_TASK_REQUEST_I_T_NEXUS_RESET = 0x10,
|
|
SCSI_TASK_REQUEST_CLEAR_ACA = 0x40,
|
|
SCSI_TASK_REQUEST_QUERY_TASK = 0x80,
|
|
SCSI_TASK_REQUEST_QUERY_TASK_SET = 0x81,
|
|
SCSI_TASK_REQUEST_QUERY_UNIT_ATTENTION = 0x82,
|
|
|
|
};
|
|
|
|
/**
|
|
* enum _SCSI_TASK_MGMT_RESPONSE_CODES - This enumeration contains all of the
|
|
* SCSI task management response codes.
|
|
*
|
|
*
|
|
*/
|
|
enum scsi_task_mgmt_response_codes {
|
|
SCSI_TASK_MGMT_FUNC_COMPLETE = 0,
|
|
SCSI_INVALID_FRAME = 2,
|
|
SCSI_TASK_MGMT_FUNC_NOT_SUPPORTED = 4,
|
|
SCSI_TASK_MGMT_FUNC_FAILED = 5,
|
|
SCSI_TASK_MGMT_FUNC_SUCCEEDED = 8,
|
|
SCSI_INVALID_LUN = 9
|
|
};
|
|
|
|
/**
|
|
* enum _SCSI_SENSE_RESPONSE_CODE - this enumeration depicts the types of sense
|
|
* data responses as per SPC-3.
|
|
*
|
|
*
|
|
*/
|
|
enum scsi_sense_response_code {
|
|
SCSI_FIXED_CURRENT_RESPONSE_CODE = 0x70,
|
|
SCSI_FIXED_DEFERRED_RESPONSE_CODE = 0x71,
|
|
SCSI_DESCRIPTOR_CURRENT_RESPONSE_CODE = 0x72,
|
|
SCSI_DESCRIPTOR_DEFERRED_RESPONSE_CODE = 0x73
|
|
|
|
};
|
|
|
|
/*
|
|
* This constant represents the valid bit located in byte 0 of a FIXED
|
|
* format sense data. */
|
|
#define SCSI_FIXED_SENSE_DATA_VALID_BIT 0x80
|
|
|
|
#define SCSI_FIXED_SENSE_DATA_BASE_LENGTH 18
|
|
|
|
/* This value is used in the DATAPRES field of the SCSI Response IU. */
|
|
#define SCSI_RESPONSE_DATA_PRES_SENSE_DATA 0x02
|
|
|
|
/**
|
|
*
|
|
*
|
|
* SCSI_SENSE_KEYS These constants delineate all of the SCSI protocol sense key
|
|
* constants
|
|
*/
|
|
#define SCSI_SENSE_NO_SENSE 0x00
|
|
#define SCSI_SENSE_RECOVERED_ERROR 0x01
|
|
#define SCSI_SENSE_NOT_READY 0x02
|
|
#define SCSI_SENSE_MEDIUM_ERROR 0x03
|
|
#define SCSI_SENSE_HARDWARE_ERROR 0x04
|
|
#define SCSI_SENSE_ILLEGAL_REQUEST 0x05
|
|
#define SCSI_SENSE_UNIT_ATTENTION 0x06
|
|
#define SCSI_SENSE_DATA_PROTECT 0x07
|
|
#define SCSI_SENSE_BLANK_CHECK 0x08
|
|
#define SCSI_SENSE_VENDOR_SPECIFIC 0x09
|
|
#define SCSI_SENSE_COPY_ABORTED 0x0A
|
|
#define SCSI_SENSE_ABORTED_COMMAND 0x0B
|
|
#define SCSI_SENSE_VOLUME_OVERFLOW 0x0D
|
|
#define SCSI_SENSE_MISCOMPARE 0x0E
|
|
|
|
/**
|
|
*
|
|
*
|
|
* SCSI_ADDITIONAL_SENSE_CODES These constants delineate all of the SCSI
|
|
* protocol additional sense code constants.
|
|
*/
|
|
#define SCSI_ASC_NO_ADDITIONAL_SENSE 0x00
|
|
#define SCSI_ASC_INITIALIZING_COMMAND_REQUIRED 0x04
|
|
#define SCSI_ASC_LUN_SELF_TEST_IN_PROGRESS 0x04
|
|
#define SCSI_ASC_LUN_FORMAT_IN_PROGRESS 0x04
|
|
#define SCSI_ASC_LUN_NOT_RESPOND_TO_SELECTION 0x05
|
|
#define SCSI_ASC_UNRECOVERED_READ_ERROR 0x11
|
|
#define SCSI_ASC_INVALID_COMMAND_OPERATION_CODE 0x20
|
|
#define SCSI_ASC_LBA_OUT_OF_RANGE 0x21
|
|
#define SCSI_ASC_INVALID_FIELD_IN_CDB 0x24
|
|
#define SCSI_ASC_INVALID_FIELD_IN_PARM_LIST 0x26
|
|
#define SCSI_ASC_WRITE_PROTECTED 0x27
|
|
#define SCSI_ASC_NOT_READY_TO_READY_CHANGE 0x28
|
|
#define SCSI_ASC_SAVING_PARMS_NOT_SUPPORTED 0x39
|
|
#define SCSI_ASC_MEDIUM_NOT_PRESENT 0x3A
|
|
#define SCSI_ASC_INTERNAL_TARGET_FAILURE 0x44
|
|
#define SCSI_ASC_IU_CRC_ERROR_DETECTED 0x47
|
|
#define SCSI_ASC_MEDIUM_REMOVAL_REQUEST 0x5A
|
|
#define SCSI_ASC_COMMAND_SEQUENCE_ERROR 0x2C
|
|
#define SCSI_ASC_MEDIA_LOAD_OR_EJECT_FAILED 0x53
|
|
#define SCSI_ASC_HARDWARE_IMPENDING_FAILURE 0x5D
|
|
#define SCSI_ASC_POWER_STATE_CHANGE 0x5E
|
|
#define SCSI_DIAGNOSTIC_FAILURE_ON_COMPONENT 0x40
|
|
#define SCSI_ASC_ATA_DEVICE_FEATURE_NOT_ENABLED 0x67
|
|
|
|
/**
|
|
*
|
|
*
|
|
* SCSI_ADDITIONAL_SENSE_CODE_QUALIFIERS This enumeration contains all of the
|
|
* used SCSI protocol additional sense code qualifier constants.
|
|
*/
|
|
#define SCSI_ASCQ_NO_ADDITIONAL_SENSE 0x00
|
|
#define SCSI_ASCQ_INVALID_FIELD_IN_CDB 0x00
|
|
#define SCSI_ASCQ_INVALID_FIELD_IN_PARM_LIST 0x00
|
|
#define SCSI_ASCQ_LUN_NOT_RESPOND_TO_SELECTION 0x00
|
|
#define SCSI_ASCQ_INTERNAL_TARGET_FAILURE 0x00
|
|
#define SCSI_ASCQ_LBA_OUT_OF_RANGE 0x00
|
|
#define SCSI_ASCQ_MEDIUM_NOT_PRESENT 0x00
|
|
#define SCSI_ASCQ_NOT_READY_TO_READY_CHANGE 0x00
|
|
#define SCSI_ASCQ_WRITE_PROTECTED 0x00
|
|
#define SCSI_ASCQ_UNRECOVERED_READ_ERROR 0x00
|
|
#define SCSI_ASCQ_SAVING_PARMS_NOT_SUPPORTED 0x00
|
|
#define SCSI_ASCQ_INVALID_COMMAND_OPERATION_CODE 0x00
|
|
#define SCSI_ASCQ_MEDIUM_REMOVAL_REQUEST 0x01
|
|
#define SCSI_ASCQ_INITIALIZING_COMMAND_REQUIRED 0x02
|
|
#define SCSI_ASCQ_IU_CRC_ERROR_DETECTED 0x03
|
|
#define SCSI_ASCQ_LUN_FORMAT_IN_PROGRESS 0x04
|
|
#define SCSI_ASCQ_LUN_SELF_TEST_IN_PROGRESS 0x09
|
|
#define SCSI_ASCQ_GENERAL_HARD_DRIVE_FAILURE 0x10
|
|
#define SCSI_ASCQ_IDLE_CONDITION_ACTIVATE_BY_COMMAND 0x03
|
|
#define SCSI_ASCQ_STANDBY_CONDITION_ACTIVATE_BY_COMMAND 0x04
|
|
#define SCSI_ASCQ_POWER_STATE_CHANGE_TO_IDLE 0x42
|
|
#define SCSI_ASCQ_POWER_STATE_CHANGE_TO_STANDBY 0x43
|
|
#define SCSI_ASCQ_ATA_DEVICE_FEATURE_NOT_ENABLED 0x0B
|
|
#define SCSI_ASCQ_UNRECOVERED_READ_ERROR_AUTO_REALLOCATE_FAIL 0x04
|
|
|
|
|
|
|
|
/**
|
|
*
|
|
*
|
|
* SCSI_STATUS_CODES These constants define all of the used SCSI status values.
|
|
*/
|
|
#define SCSI_STATUS_GOOD 0x00
|
|
#define SCSI_STATUS_CHECK_CONDITION 0x02
|
|
#define SCSI_STATUS_CONDITION_MET 0x04
|
|
#define SCSI_STATUS_BUSY 0x08
|
|
#define SCSI_STATUS_TASKFULL 0x28
|
|
#define SCSI_STATUS_ACA 0x30
|
|
#define SCSI_STATUS_ABORT 0x40
|
|
|
|
/**
|
|
*
|
|
*
|
|
* SCSI_OPERATION_CODES These constants delineate all of the SCSI
|
|
* command/operation codes.
|
|
*/
|
|
#define SCSI_INQUIRY 0x12
|
|
#define SCSI_READ_CAPACITY_10 0x25
|
|
#define SCSI_SERVICE_ACTION_IN_16 0x9E
|
|
#define SCSI_TEST_UNIT_READY 0x00
|
|
#define SCSI_START_STOP_UNIT 0x1B
|
|
#define SCSI_SYNCHRONIZE_CACHE_10 0x35
|
|
#define SCSI_SYNCHRONIZE_CACHE_16 0x91
|
|
#define SCSI_REQUEST_SENSE 0x03
|
|
#define SCSI_REPORT_LUNS 0xA0
|
|
#define SCSI_REASSIGN_BLOCKS 0x07
|
|
#define SCSI_READ_6 0x08
|
|
#define SCSI_READ_10 0x28
|
|
#define SCSI_READ_12 0xA8
|
|
#define SCSI_READ_16 0x88
|
|
#define SCSI_WRITE_6 0x0A
|
|
#define SCSI_WRITE_10 0x2A
|
|
#define SCSI_WRITE_12 0xAA
|
|
#define SCSI_WRITE_16 0x8A
|
|
#define SCSI_VERIFY_10 0x2F
|
|
#define SCSI_VERIFY_12 0xAF
|
|
#define SCSI_VERIFY_16 0x8F
|
|
#define SCSI_SEEK_6 0x01
|
|
#define SCSI_SEEK_10 0x02
|
|
#define SCSI_WRITE_VERIFY 0x2E
|
|
#define SCSI_FORMAT_UNIT 0x04
|
|
#define SCSI_READ_BUFFER 0x3C
|
|
#define SCSI_WRITE_BUFFER 0x3B
|
|
#define SCSI_SEND_DIAGNOSTIC 0x1D
|
|
#define SCSI_RECEIVE_DIAGNOSTIC 0x1C
|
|
#define SCSI_MODE_SENSE_6 0x1A
|
|
#define SCSI_MODE_SENSE_10 0x5A
|
|
#define SCSI_MODE_SELECT_6 0x15
|
|
#define SCSI_MODE_SELECT_10 0x55
|
|
#define SCSI_MAINTENANCE_IN 0xA3
|
|
#define SCSI_LOG_SENSE 0x4D
|
|
#define SCSI_LOG_SELECT 0x4C
|
|
#define SCSI_RESERVE_6 0x16
|
|
#define SCSI_RESERVE_10 0x56
|
|
#define SCSI_RELEASE_6 0x17
|
|
#define SCSI_RELEASE_10 0x57
|
|
#define SCSI_ATA_PASSTHRU_12 0xA1
|
|
#define SCSI_ATA_PASSTHRU_16 0x85
|
|
#define SCSI_WRITE_LONG_10 0x3F
|
|
#define SCSI_WRITE_LONG_16 0x9F
|
|
#define SCSI_PERSISTENT_RESERVE_IN 0x5E
|
|
#define SCSI_PERSISTENT_RESERVE_OUT 0x5F
|
|
|
|
/**
|
|
*
|
|
*
|
|
* SCSI_SERVICE_ACTION_IN_CODES Service action in operations.
|
|
*/
|
|
#define SCSI_SERVICE_ACTION_IN_CODES_READ_CAPACITY_16 0x10
|
|
|
|
#define SCSI_SERVICE_ACTION_MASK 0x1f
|
|
|
|
/**
|
|
*
|
|
*
|
|
* SCSI_MAINTENANCE_IN_SERVICE_ACTION_CODES MAINTENANCE IN service action codes.
|
|
*/
|
|
#define SCSI_REPORT_TASK_MGMT 0x0D
|
|
#define SCSI_REPORT_OP_CODES 0x0C
|
|
|
|
/**
|
|
*
|
|
*
|
|
* SCSI_MODE_PAGE_CONTROLS These constants delineate all of the used SCSI Mode
|
|
* Page control values.
|
|
*/
|
|
#define SCSI_MODE_SENSE_PC_CURRENT 0x0
|
|
#define SCSI_MODE_SENSE_PC_CHANGEABLE 0x1
|
|
#define SCSI_MODE_SENSE_PC_DEFAULT 0x2
|
|
#define SCSI_MODE_SENSE_PC_SAVED 0x3
|
|
|
|
#define SCSI_MODE_SENSE_PC_SHIFT 0x06
|
|
#define SCSI_MODE_SENSE_PAGE_CODE_ENABLE 0x3F
|
|
#define SCSI_MODE_SENSE_DBD_ENABLE 0x08
|
|
#define SCSI_MODE_SENSE_LLBAA_ENABLE 0x10
|
|
|
|
/**
|
|
*
|
|
*
|
|
* SCSI_MODE_PAGE_CODES These constants delineate all of the used SCSI Mode
|
|
* Page codes.
|
|
*/
|
|
#define SCSI_MODE_PAGE_READ_WRITE_ERROR 0x01
|
|
#define SCSI_MODE_PAGE_DISCONNECT_RECONNECT 0x02
|
|
#define SCSI_MODE_PAGE_CACHING 0x08
|
|
#define SCSI_MODE_PAGE_CONTROL 0x0A
|
|
#define SCSI_MODE_PAGE_PROTOCOL_SPECIFIC_PORT 0x19
|
|
#define SCSI_MODE_PAGE_POWER_CONDITION 0x1A
|
|
#define SCSI_MODE_PAGE_INFORMATIONAL_EXCP_CONTROL 0x1C
|
|
#define SCSI_MODE_PAGE_ALL_PAGES 0x3F
|
|
|
|
#define SCSI_MODE_SENSE_ALL_SUB_PAGES_CODE 0xFF
|
|
#define SCSI_MODE_SENSE_NO_SUB_PAGES_CODE 0x0
|
|
#define SCSI_MODE_SENSE_PROTOCOL_PORT_NUM_SUBPAGES 0x1
|
|
#define SCSI_MODE_PAGE_CACHE_PAGE_WCE_BIT 0x04
|
|
#define SCSI_MODE_PAGE_CACHE_PAGE_DRA_BIT 0x20
|
|
#define SCSI_MODE_PAGE_DEXCPT_ENABLE 0x08
|
|
#define SCSI_MODE_SENSE_HEADER_FUA_ENABLE 0x10
|
|
#define SCSI_MODE_PAGE_POWER_CONDITION_STANDBY 0x1
|
|
#define SCSI_MODE_PAGE_POWER_CONDITION_IDLE 0x2
|
|
|
|
#define SCSI_MODE_SENSE_6_HEADER_LENGTH 4
|
|
#define SCSI_MODE_SENSE_10_HEADER_LENGTH 8
|
|
#define SCSI_MODE_SENSE_STD_BLOCK_DESCRIPTOR_LENGTH 8
|
|
#define SCSI_MODE_SENSE_LLBA_BLOCK_DESCRIPTOR_LENGTH 16
|
|
|
|
#define SCSI_MODE_PAGE_INFORMATIONAL_EXCP_DXCPT_ENABLE 0x08
|
|
#define SCSI_MODE_PAGE_19_SAS_ID 0x6
|
|
#define SCSI_MODE_PAGE_19_SUB1_PAGE_NUM 0x1
|
|
#define SCSI_MODE_PAGE_19_SUB1_PC 0x59
|
|
|
|
#define SCSI_MODE_HEADER_MEDIUM_TYPE_SBC 0x00
|
|
|
|
/* Mode Select constrains related masks value */
|
|
#define SCSI_MODE_SELECT_PF_BIT 0x1
|
|
#define SCSI_MODE_SELECT_PF_MASK 0x10
|
|
#define SCSI_MODE_SELECT_MODE_PAGE_MRIE_BYTE 0x6
|
|
#define SCSI_MODE_SELECT_MODE_PAGE_MRIE_MASK 0x0F
|
|
#define SCSI_MODE_SELECT_MODE_PAGE_SPF_MASK 0x40
|
|
#define SCSI_MODE_SELECT_MODE_PAGE_01_AWRE_MASK 0x80
|
|
#define SCSI_MODE_SELECT_MODE_PAGE_01_ARRE_MASK 0x40
|
|
#define SCSI_MODE_SELECT_MODE_PAGE_01_RC_ERBITS_MASK 0x1F
|
|
#define SCSI_MODE_SELECT_MODE_PAGE_08_FSW_LBCSS_NVDIS 0xC1
|
|
#define SCSI_MODE_SELECT_MODE_PAGE_1C_PERF_TEST 0x84
|
|
#define SCSI_MODE_SELECT_MODE_PAGE_0A_TST_TMF_RLEC 0xF1
|
|
#define SCSI_MODE_SELECT_MODE_PAGE_0A_MODIFIER 0xF0
|
|
#define SCSI_MODE_SELECT_MODE_PAGE_0A_UA_SWP 0x38
|
|
#define SCSI_MODE_SELECT_MODE_PAGE_0A_TAS_AUTO 0x47
|
|
|
|
|
|
#define SCSI_CONTROL_BYTE_NACA_BIT_ENABLE 0x04
|
|
#define SCSI_MOVE_FUA_BIT_ENABLE 0x08
|
|
#define SCSI_READ_CAPACITY_PMI_BIT_ENABLE 0x01
|
|
#define SCSI_READ_CAPACITY_10_DATA_LENGTH 8
|
|
#define SCSI_READ_CAPACITY_16_DATA_LENGTH 32
|
|
|
|
/* Inquiry constants */
|
|
#define SCSI_INQUIRY_EVPD_ENABLE 0x01
|
|
#define SCSI_INQUIRY_PAGE_CODE_OFFSET 0x02
|
|
#define SCSI_INQUIRY_SUPPORTED_PAGES_PAGE 0x00
|
|
#define SCSI_INQUIRY_UNIT_SERIAL_NUM_PAGE 0x80
|
|
#define SCSI_INQUIRY_DEVICE_ID_PAGE 0x83
|
|
#define SCSI_INQUIRY_ATA_INFORMATION_PAGE 0x89
|
|
#define SCSI_INQUIRY_BLOCK_DEVICE_PAGE 0xB1
|
|
#define SCSI_INQUIRY_BLOCK_DEVICE_LENGTH 0x3C
|
|
#define SCSI_INQUIRY_STANDARD_ALLOCATION_LENGTH 0x24 /* 36 */
|
|
|
|
#define SCSI_REQUEST_SENSE_ALLOCATION_LENGTH 0xFC /* 252 */
|
|
|
|
/** Defines the log page codes that are use in gathing Smart data
|
|
*/
|
|
#define SCSI_LOG_PAGE_SUPPORTED_PAGES 0x00
|
|
#define SCSI_LOG_PAGE_INFORMATION_EXCEPTION 0x2F
|
|
#define SCSI_LOG_PAGE_SELF_TEST 0x10
|
|
|
|
/**
|
|
*
|
|
*
|
|
* SCSI_INQUIRY_VPD The following are constants used with vital product data
|
|
* inquiry pages. Values are already shifted into the proper nibble location.
|
|
*/
|
|
#define SCSI_PIV_ENABLE 0x80
|
|
#define SCSI_LUN_ASSOCIATION 0x00
|
|
#define SCSI_TARGET_PORT_ASSOCIATION 0x10
|
|
|
|
#define SCSI_VEN_UNIQUE_IDENTIFIER_TYPE 0x00
|
|
#define SCSI_NAA_IDENTIFIER_TYPE 0x03
|
|
|
|
#define SCSI_T10_IDENTIFIER_TYPE 0x01
|
|
#define SCSI_BINARY_CODE_SET 0x01
|
|
#define SCSI_ASCII_CODE_SET 0x02
|
|
#define SCSI_FC_PROTOCOL_IDENTIFIER 0x00
|
|
#define SCSI_SAS_PROTOCOL_IDENTIFIER 0x60
|
|
|
|
#define SCSI_VERIFY_BYTCHK_ENABLED 0x02
|
|
|
|
#define SCSI_SYNCHRONIZE_CACHE_IMMED_ENABLED 0x02
|
|
/**
|
|
*
|
|
*
|
|
* SCSI_START_STOP_UNIT_POWER_CONDITION_CODES The following are SCSI Start Stop
|
|
* Unit command Power Condition codes.
|
|
*/
|
|
#define SCSI_START_STOP_UNIT_POWER_CONDITION_START_VALID 0x0
|
|
#define SCSI_START_STOP_UNIT_POWER_CONDITION_ACTIVE 0x1
|
|
#define SCSI_START_STOP_UNIT_POWER_CONDITION_IDLE 0x2
|
|
#define SCSI_START_STOP_UNIT_POWER_CONDITION_STANDBY 0x3
|
|
#define SCSI_START_STOP_UNIT_POWER_CONDITION_LU_CONTROL 0x7
|
|
#define SCSI_START_STOP_UNIT_POWER_CONDITION_FORCE_S_CONTROL 0xB
|
|
|
|
#define SCSI_START_STOP_UNIT_IMMED_MASK 0x1
|
|
#define SCSI_START_STOP_UNIT_IMMED_SHIFT 0
|
|
|
|
#define SCSI_START_STOP_UNIT_START_BIT_MASK 0x1
|
|
#define SCSI_START_STOP_UNIT_START_BIT_SHIFT 0
|
|
|
|
#define SCSI_START_STOP_UNIT_LOEJ_BIT_MASK 0x2
|
|
#define SCSI_START_STOP_UNIT_LOEJ_BIT_SHIFT 1
|
|
|
|
#define SCSI_START_STOP_UNIT_NO_FLUSH_MASK 0x4
|
|
#define SCSI_START_STOP_UNIT_NO_FLUSH_SHIFT 2
|
|
|
|
#define SCSI_START_STOP_UNIT_POWER_CONDITION_MODIFIER_MASK 0xF
|
|
#define SCSI_START_STOP_UNIT_POWER_CONDITION_MODIFIER_SHIFT 0
|
|
|
|
#define SCSI_START_STOP_UNIT_POWER_CONDITION_MASK 0xF0
|
|
#define SCSI_START_STOP_UNIT_POWER_CONDITION_SHIFT 4
|
|
|
|
#define SCSI_LOG_SENSE_PC_FIELD_MASK 0xC0
|
|
#define SCSI_LOG_SENSE_PC_FIELD_SHIFT 6
|
|
|
|
#define SCSI_LOG_SENSE_PAGE_CODE_FIELD_MASK 0x3F
|
|
#define SCSI_LOG_SENSE_PAGE_CODE_FIELD_SHIFT 0
|
|
|
|
/**
|
|
*
|
|
*
|
|
* MRIE - Method of reporting informational exceptions codes
|
|
*/
|
|
#define NO_REPORTING_INFO_EXCEPTION_CONDITION 0x0
|
|
#define ASYNCHRONOUS_EVENT_REPORTING 0x1
|
|
#define ESTABLISH_UNIT_ATTENTION_CONDITION 0x2
|
|
#define CONDITIONALLY_GENERATE_RECOVERED_ERROR 0x3
|
|
#define UNCONDITIONALLY_GENERATE_RECOVERED_ERROR 0x4
|
|
#define GENERATE_NO_SENSE 0x5
|
|
#define REPORT_INFO_EXCEPTION_CONDITION_ON_REQUEST 0x6
|
|
|
|
#define SCSI_INFORMATION_EXCEPTION_DEXCPT_BIT 0x08
|
|
|
|
/* Reassign Blocks masks */
|
|
#define SCSI_REASSIGN_BLOCKS_LONGLBA_BIT 0x02
|
|
#define SCSI_REASSIGN_BLOCKS_LONGLIST_BIT 0x01
|
|
|
|
#endif /* _SCSI_H_ */
|
|
|