From 0c9ffe0f6286a02bf82f8d7fb7274aec2ad977f1 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 30 Dec 2010 13:27:36 -0800 Subject: USB: Disable auto-suspend for USB 3.0 hubs. USB 3.0 devices have a slightly different suspend sequence than USB 2.0/1.1 devices. There isn't support for USB 3.0 device suspend yet, so make khubd leave autosuspend disabled for USB 3.0 hubs. Make sure that USB 3.0 roothubs still have autosuspend enabled, since that path in the xHCI driver works fine. Signed-off-by: Sarah Sharp --- drivers/usb/core/hub.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers/usb/core/hub.c') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 13aafd1b45e..0968157f3be 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1290,8 +1290,14 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) desc = intf->cur_altsetting; hdev = interface_to_usbdev(intf); - /* Hubs have proper suspend/resume support */ - usb_enable_autosuspend(hdev); + /* Hubs have proper suspend/resume support. USB 3.0 device suspend is + * different from USB 2.0/1.1 device suspend, and unfortunately we + * don't support it yet. So leave autosuspend disabled for USB 3.0 + * external hubs for now. Enable autosuspend for USB 3.0 roothubs, + * since that isn't a "real" hub. + */ + if (!hub_is_superspeed(hdev) || !hdev->parent) + usb_enable_autosuspend(hdev); if (hdev->level == MAX_TOPO_LEVEL) { dev_err(&intf->dev, -- cgit v1.2.3