From 285f2ddae03ca207877262f5a9dbd9cddd8b3913 Mon Sep 17 00:00:00 2001 From: Sujith Date: Fri, 8 Jan 2010 10:36:07 +0530 Subject: ath9k: Cleanup init/deinit routines The device initialization and termination functions were messy and convoluted. Introduce helper functions to clarify init_softc() and simplify things in general. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/pci.c | 57 ++++++++++++++++++------------------ 1 file changed, 29 insertions(+), 28 deletions(-) (limited to 'drivers/net/wireless/ath/ath9k/pci.c') diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index f7af5ea5475..95b9a07597e 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -113,25 +113,22 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) u16 subsysid; u32 val; int ret = 0; - struct ath_hw *ah; char hw_name[64]; if (pci_enable_device(pdev)) return -EIO; ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); - if (ret) { printk(KERN_ERR "ath9k: 32-bit DMA not available\n"); - goto bad; + goto err_dma; } ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); - if (ret) { printk(KERN_ERR "ath9k: 32-bit DMA consistent " "DMA enable failed\n"); - goto bad; + goto err_dma; } /* @@ -171,22 +168,22 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (ret) { dev_err(&pdev->dev, "PCI memory region reserve error\n"); ret = -ENODEV; - goto bad; + goto err_region; } mem = pci_iomap(pdev, 0, 0); if (!mem) { printk(KERN_ERR "PCI memory map error\n") ; ret = -EIO; - goto bad1; + goto err_iomap; } hw = ieee80211_alloc_hw(sizeof(struct ath_wiphy) + sizeof(struct ath_softc), &ath9k_ops); if (!hw) { - dev_err(&pdev->dev, "no memory for ieee80211_hw\n"); + dev_err(&pdev->dev, "No memory for ieee80211_hw\n"); ret = -ENOMEM; - goto bad2; + goto err_alloc_hw; } SET_IEEE80211_DEV(hw, &pdev->dev); @@ -201,25 +198,22 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) sc->dev = &pdev->dev; sc->mem = mem; - pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &subsysid); - ret = ath_init_device(id->device, sc, subsysid, &ath_pci_bus_ops); - if (ret) { - dev_err(&pdev->dev, "failed to initialize device\n"); - goto bad3; - } - - /* setup interrupt service routine */ - ret = request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath9k", sc); if (ret) { dev_err(&pdev->dev, "request_irq failed\n"); - goto bad4; + goto err_irq; } sc->irq = pdev->irq; - ah = sc->sc_ah; - ath9k_hw_name(ah, hw_name, sizeof(hw_name)); + pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &subsysid); + ret = ath9k_init_device(id->device, sc, subsysid, &ath_pci_bus_ops); + if (ret) { + dev_err(&pdev->dev, "Failed to initialize device\n"); + goto err_init; + } + + ath9k_hw_name(sc->sc_ah, hw_name, sizeof(hw_name)); printk(KERN_INFO "%s: %s mem=0x%lx, irq=%d\n", wiphy_name(hw->wiphy), @@ -227,15 +221,18 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) (unsigned long)mem, pdev->irq); return 0; -bad4: - ath_detach(sc); -bad3: + +err_init: + free_irq(sc->irq, sc); +err_irq: ieee80211_free_hw(hw); -bad2: +err_alloc_hw: pci_iounmap(pdev, mem); -bad1: +err_iomap: pci_release_region(pdev, 0); -bad: +err_region: + /* Nothing */ +err_dma: pci_disable_device(pdev); return ret; } @@ -245,8 +242,12 @@ static void ath_pci_remove(struct pci_dev *pdev) struct ieee80211_hw *hw = pci_get_drvdata(pdev); struct ath_wiphy *aphy = hw->priv; struct ath_softc *sc = aphy->sc; + struct ath_common *common = ath9k_hw_common(sc->sc_ah); - ath_cleanup(sc); + ath9k_deinit_device(sc); + free_irq(sc->irq, sc); + ieee80211_free_hw(sc->hw); + ath_bus_cleanup(common); } #ifdef CONFIG_PM -- cgit v1.2.3