From 28bec7b845e10b68e6ba1ade5de0fc566690fc61 Mon Sep 17 00:00:00 2001 From: Nikolay Ledovskikh Date: Fri, 18 Feb 2011 19:59:53 +0300 Subject: ath5k: Correct channel setting for AR2317 chip Correct channel setting function must be used for AR2317. When I tested ahb patch on bullet2 all seemed to work fine, but it couldn't connect another host (using ibss for example). During an analysis I observed that it's transmitting on another channel. I looked into madwifi code and understood that the problem is in channel setting function. So atheros RF2317 not fully handled in the current ath5k version and must be patched. Signed-off-by: Nikolay Ledovskikh Acked-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/phy.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/wireless/ath/ath5k/phy.c') diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 78c26fdccad..c44111fc98b 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -1253,6 +1253,7 @@ static int ath5k_hw_channel(struct ath5k_hw *ah, case AR5K_RF5111: ret = ath5k_hw_rf5111_channel(ah, channel); break; + case AR5K_RF2317: case AR5K_RF2425: ret = ath5k_hw_rf2425_channel(ah, channel); break; -- cgit v1.2.3