From 0207c0c51a37659a92232e665f2a7fadec170556 Mon Sep 17 00:00:00 2001 From: Bruno Randolf Date: Tue, 21 Dec 2010 17:30:43 +0900 Subject: ath5k: Use helper function to get eeprom mode from channel Introduce a helper function to get the EEPROM mode from channel and remove multiple similar switch statements. Also since it's now easy to get the EEPROM mode from the channel, use them inside the functions which need it, instead of passing a redundant ee_mode parameter. Signed-off-by: Bruno Randolf Acked-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/phy.c | 68 ++++++++---------------------------- 1 file changed, 15 insertions(+), 53 deletions(-) (limited to 'drivers/net/wireless/ath/ath5k/phy.c') diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index b6e96213e92..9306d5fda67 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -1355,20 +1355,7 @@ void ath5k_hw_update_noise_floor(struct ath5k_hw *ah) return; } - switch (ah->ah_current_channel->hw_value & CHANNEL_MODES) { - case CHANNEL_A: - case CHANNEL_XR: - ee_mode = AR5K_EEPROM_MODE_11A; - break; - case CHANNEL_G: - ee_mode = AR5K_EEPROM_MODE_11G; - break; - default: - case CHANNEL_B: - ee_mode = AR5K_EEPROM_MODE_11B; - break; - } - + ee_mode = ath5k_eeprom_mode_from_channel(ah->ah_current_channel); /* completed NF calibration, test threshold */ nf = ath5k_hw_read_measured_noise_floor(ah); @@ -1941,18 +1928,8 @@ ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode) def_ant = ah->ah_def_ant; - switch (channel->hw_value & CHANNEL_MODES) { - case CHANNEL_A: - case CHANNEL_XR: - ee_mode = AR5K_EEPROM_MODE_11A; - break; - case CHANNEL_G: - ee_mode = AR5K_EEPROM_MODE_11G; - break; - case CHANNEL_B: - ee_mode = AR5K_EEPROM_MODE_11B; - break; - default: + ee_mode = ath5k_eeprom_mode_from_channel(channel); + if (ee_mode < 0) { ATH5K_ERR(ah->ah_sc, "invalid channel: %d\n", channel->center_freq); return; @@ -3100,11 +3077,11 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr, */ static int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, - u8 ee_mode, u8 txpower) + u8 txpower) { struct ath5k_rate_pcal_info rate_info; struct ieee80211_channel *curr_channel = ah->ah_current_channel; - u8 type; + u8 type, ee_mode; int ret; if (txpower > AR5K_TUNE_MAX_TXPOWER) { @@ -3112,6 +3089,13 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, return -EINVAL; } + ee_mode = ath5k_eeprom_mode_from_channel(channel); + if (ee_mode < 0) { + ATH5K_ERR(ah->ah_sc, + "invalid channel: %d\n", channel->center_freq); + return -EINVAL; + } + /* Initialize TX power table */ switch (ah->ah_radio) { case AR5K_RF5110: @@ -3208,31 +3192,10 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower) { - /*Just a try M.F.*/ - struct ieee80211_channel *channel = ah->ah_current_channel; - u8 ee_mode; - - switch (channel->hw_value & CHANNEL_MODES) { - case CHANNEL_A: - case CHANNEL_XR: - ee_mode = AR5K_EEPROM_MODE_11A; - break; - case CHANNEL_G: - ee_mode = AR5K_EEPROM_MODE_11G; - break; - case CHANNEL_B: - ee_mode = AR5K_EEPROM_MODE_11B; - break; - default: - ATH5K_ERR(ah->ah_sc, - "invalid channel: %d\n", channel->center_freq); - return -EINVAL; - } - ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_TXPOWER, "changing txpower to %d\n", txpower); - return ath5k_hw_txpower(ah, channel, ee_mode, txpower); + return ath5k_hw_txpower(ah, ah->ah_current_channel, txpower); } /*************\ @@ -3240,7 +3203,7 @@ int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower) \*************/ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, - u8 mode, u8 ee_mode, bool fast) + u8 mode, bool fast) { struct ieee80211_channel *curr_channel; int ret, i; @@ -3281,8 +3244,7 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, * RF buffer settings on 5211/5212+ so that we * properly set curve indices. */ - ret = ath5k_hw_txpower(ah, channel, ee_mode, - ah->ah_txpower.txp_cur_pwr ? + ret = ath5k_hw_txpower(ah, channel, ah->ah_txpower.txp_cur_pwr ? ah->ah_txpower.txp_cur_pwr / 2 : AR5K_TUNE_MAX_TXPOWER); if (ret) return ret; -- cgit v1.2.3