From 25985edcedea6396277003854657b5f3cb31a628 Mon Sep 17 00:00:00 2001 From: Lucas De Marchi Date: Wed, 30 Mar 2011 22:57:33 -0300 Subject: Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi --- drivers/mtd/nand/Kconfig | 2 +- drivers/mtd/nand/ams-delta.c | 2 +- drivers/mtd/nand/autcpu12.c | 2 +- drivers/mtd/nand/cs553x_nand.c | 2 +- drivers/mtd/nand/denali.c | 6 +++--- drivers/mtd/nand/diskonchip.c | 8 ++++---- drivers/mtd/nand/fsl_elbc_nand.c | 2 +- drivers/mtd/nand/fsmc_nand.c | 10 +++++----- drivers/mtd/nand/nand_base.c | 2 +- drivers/mtd/nand/nand_bbt.c | 2 +- drivers/mtd/nand/nandsim.c | 2 +- drivers/mtd/nand/nomadik_nand.c | 2 +- drivers/mtd/nand/pasemi_nand.c | 2 +- drivers/mtd/nand/plat_nand.c | 2 +- drivers/mtd/nand/pxa3xx_nand.c | 2 +- drivers/mtd/nand/r852.c | 10 +++++----- drivers/mtd/nand/sh_flctl.c | 2 +- drivers/mtd/nand/sm_common.c | 2 +- drivers/mtd/nand/tmio_nand.c | 2 +- 19 files changed, 32 insertions(+), 32 deletions(-) (limited to 'drivers/mtd/nand') diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index a92054e945e..edec457d361 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -239,7 +239,7 @@ config MTD_NAND_BCM_UMI help This enables the NAND flash controller on the BCM UMI block. - No board specfic support is done by this driver, each board + No board specific support is done by this driver, each board must advertise a platform_device for the driver to attach. config MTD_NAND_BCM_UMI_HWCS diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c index a067d090cb3..bc65bf71e1a 100644 --- a/drivers/mtd/nand/ams-delta.c +++ b/drivers/mtd/nand/ams-delta.c @@ -228,7 +228,7 @@ static int __devinit ams_delta_init(struct platform_device *pdev) AMS_DELTA_LATCH2_NAND_NCE | AMS_DELTA_LATCH2_NAND_NWP); - /* Scan to find existance of the device */ + /* Scan to find existence of the device */ if (nand_scan(ams_delta_mtd, 1)) { err = -ENXIO; goto out_mtd; diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c index 7c95da1f612..0911cf03db8 100644 --- a/drivers/mtd/nand/autcpu12.c +++ b/drivers/mtd/nand/autcpu12.c @@ -176,7 +176,7 @@ static int __init autcpu12_init(void) */ this->options = NAND_USE_FLASH_BBT; - /* Scan to find existance of the device */ + /* Scan to find existence of the device */ if (nand_scan(autcpu12_mtd, 1)) { err = -ENXIO; goto out_ior; diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c index 9f1b451005c..71c35a0b982 100644 --- a/drivers/mtd/nand/cs553x_nand.c +++ b/drivers/mtd/nand/cs553x_nand.c @@ -241,7 +241,7 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr) /* Enable the following for a flash based bad block table */ this->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR; - /* Scan to find existance of the device */ + /* Scan to find existence of the device */ if (nand_scan(new_mtd, 1)) { err = -ENXIO; goto out_ior; diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 8c8d3c86c0e..4633f094c51 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -724,7 +724,7 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask) } /* This helper function setups the registers for ECC and whether or not - * the spare area will be transfered. */ + * the spare area will be transferred. */ static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en, bool transfer_spare) { @@ -965,7 +965,7 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf, if (ECC_ERROR_CORRECTABLE(err_correction_info)) { /* If err_byte is larger than ECC_SECTOR_SIZE, - * means error happend in OOB, so we ignore + * means error happened in OOB, so we ignore * it. It's no need for us to correct it * err_device is represented the NAND error * bits are happened in if there are more @@ -1109,7 +1109,7 @@ static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip, } /* This is the callback that the NAND core calls to write a page without ECC. - * raw access is similiar to ECC page writes, so all the work is done in the + * raw access is similar to ECC page writes, so all the work is done in the * write_page() function above. */ static void denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index b7f8de7b278..96c0b34ba8d 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -137,7 +137,7 @@ static struct rs_control *rs_decoder; * * Fabrice Bellard figured this out in the old docecc code. I added * some comments, improved a minor bit and converted it to make use - * of the generic Reed-Solomon libary. tglx + * of the generic Reed-Solomon library. tglx */ static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc) { @@ -400,7 +400,7 @@ static uint16_t __init doc200x_ident_chip(struct mtd_info *mtd, int nr) doc200x_hwcontrol(mtd, 0, NAND_CTRL_ALE | NAND_CTRL_CHANGE); doc200x_hwcontrol(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); - /* We cant' use dev_ready here, but at least we wait for the + /* We can't' use dev_ready here, but at least we wait for the * command to complete */ udelay(50); @@ -986,7 +986,7 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat, dummy = ReadDOC(docptr, ECCConf); } - /* Error occured ? */ + /* Error occurred ? */ if (dummy & 0x80) { for (i = 0; i < 6; i++) { if (DoC_is_MillenniumPlus(doc)) @@ -1160,7 +1160,7 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio /* NOTE: The lines below modify internal variables of the NAND and MTD layers; variables with have already been configured by nand_scan. Unfortunately, we didn't know before this point what these values - should be. Thus, this code is somewhat dependant on the exact + should be. Thus, this code is somewhat dependent on the exact implementation of the NAND layer. */ if (mh->UnitSizeFactor != 0xff) { this->bbt_erase_shift += (0xff - mh->UnitSizeFactor); diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 7a13d42cbab..537e380b8dc 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -59,7 +59,7 @@ struct fsl_elbc_mtd { unsigned int fmr; /* FCM Flash Mode Register value */ }; -/* Freescale eLBC FCM controller infomation */ +/* Freescale eLBC FCM controller information */ struct fsl_elbc_fcm_ctrl { struct nand_hw_control controller; diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c index 205b10b9f9b..0d45ef3883e 100644 --- a/drivers/mtd/nand/fsmc_nand.c +++ b/drivers/mtd/nand/fsmc_nand.c @@ -335,7 +335,7 @@ static void fsmc_enable_hwecc(struct mtd_info *mtd, int mode) /* * fsmc_read_hwecc_ecc4 - Hardware ECC calculator for ecc4 option supported by - * FSMC. ECC is 13 bytes for 512 bytes of data (supports error correction upto + * FSMC. ECC is 13 bytes for 512 bytes of data (supports error correction up to * max of 8-bits) */ static int fsmc_read_hwecc_ecc4(struct mtd_info *mtd, const uint8_t *data, @@ -381,7 +381,7 @@ static int fsmc_read_hwecc_ecc4(struct mtd_info *mtd, const uint8_t *data, /* * fsmc_read_hwecc_ecc1 - Hardware ECC calculator for ecc1 option supported by - * FSMC. ECC is 3 bytes for 512 bytes of data (supports error correction upto + * FSMC. ECC is 3 bytes for 512 bytes of data (supports error correction up to * max of 1-bit) */ static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data, @@ -408,10 +408,10 @@ static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data, * @buf: buffer to store read data * @page: page number to read * - * This routine is needed for fsmc verison 8 as reading from NAND chip has to be + * This routine is needed for fsmc version 8 as reading from NAND chip has to be * performed in a strict sequence as follows: * data(512 byte) -> ecc(13 byte) - * After this read, fsmc hardware generates and reports error data bits(upto a + * After this read, fsmc hardware generates and reports error data bits(up to a * max of 8 bits) */ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, @@ -686,7 +686,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) } /* - * Scan to find existance of the device + * Scan to find existence of the device */ if (nand_scan_ident(&host->mtd, 1, NULL)) { ret = -ENXIO; diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 85cfc061d41..c54a4cbac6b 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -1582,7 +1582,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, } /** - * nand_read - [MTD Interface] MTD compability function for nand_do_read_ecc + * nand_read - [MTD Interface] MTD compatibility function for nand_do_read_ecc * @mtd: MTD device structure * @from: offset to read from * @len: number of bytes to read diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index a1e8b30078d..af46428286f 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -945,7 +945,7 @@ static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc rd2 = NULL; /* Per chip or per device ? */ chipsel = (td->options & NAND_BBT_PERCHIP) ? i : -1; - /* Mirrored table avilable ? */ + /* Mirrored table available ? */ if (md) { if (td->pages[i] == -1 && md->pages[i] == -1) { writeops = 0x03; diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index 213181be0d9..893d95bfea4 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -162,7 +162,7 @@ MODULE_PARM_DESC(bitflips, "Maximum number of random bit flips per page (z MODULE_PARM_DESC(gravepages, "Pages that lose data [: maximum reads (defaults to 3)]" " separated by commas e.g. 1401:2 means page 1401" " can be read only twice before failing"); -MODULE_PARM_DESC(rptwear, "Number of erases inbetween reporting wear, if not zero"); +MODULE_PARM_DESC(rptwear, "Number of erases between reporting wear, if not zero"); MODULE_PARM_DESC(overridesize, "Specifies the NAND Flash size overriding the ID bytes. " "The size is specified in erase blocks and as the exponent of a power of two" " e.g. 5 means a size of 32 erase blocks"); diff --git a/drivers/mtd/nand/nomadik_nand.c b/drivers/mtd/nand/nomadik_nand.c index 8c0b6937522..a045a4a581b 100644 --- a/drivers/mtd/nand/nomadik_nand.c +++ b/drivers/mtd/nand/nomadik_nand.c @@ -151,7 +151,7 @@ static int nomadik_nand_probe(struct platform_device *pdev) nand->options = pdata->options; /* - * Scan to find existance of the device + * Scan to find existence of the device */ if (nand_scan(&host->mtd, 1)) { ret = -ENXIO; diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c index 59efa829ef2..20bfe5f15af 100644 --- a/drivers/mtd/nand/pasemi_nand.c +++ b/drivers/mtd/nand/pasemi_nand.c @@ -157,7 +157,7 @@ static int __devinit pasemi_nand_probe(struct platform_device *ofdev) /* Enable the following for a flash based bad block table */ chip->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR; - /* Scan to find existance of the device */ + /* Scan to find existence of the device */ if (nand_scan(pasemi_nand_mtd, 1)) { err = -ENXIO; goto out_lpc; diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c index 317aff428e4..caf5a736340 100644 --- a/drivers/mtd/nand/plat_nand.c +++ b/drivers/mtd/nand/plat_nand.c @@ -95,7 +95,7 @@ static int __devinit plat_nand_probe(struct platform_device *pdev) goto out; } - /* Scan to find existance of the device */ + /* Scan to find existence of the device */ if (nand_scan(&data->mtd, pdata->chip.nr_chips)) { err = -ENXIO; goto out; diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index ab7f4c33ced..ff0701276d6 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -184,7 +184,7 @@ struct pxa3xx_nand_info { static int use_dma = 1; module_param(use_dma, bool, 0444); -MODULE_PARM_DESC(use_dma, "enable DMA for data transfering to/from NAND HW"); +MODULE_PARM_DESC(use_dma, "enable DMA for data transferring to/from NAND HW"); /* * Default NAND flash controller configuration setup by the diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c index 6322d1fb5d6..cae2e013c98 100644 --- a/drivers/mtd/nand/r852.c +++ b/drivers/mtd/nand/r852.c @@ -185,7 +185,7 @@ static void r852_do_dma(struct r852_device *dev, uint8_t *buf, int do_read) dbg_verbose("doing dma %s ", do_read ? "read" : "write"); - /* Set intial dma state: for reading first fill on board buffer, + /* Set initial dma state: for reading first fill on board buffer, from device, for writes first fill the buffer from memory*/ dev->dma_state = do_read ? DMA_INTERNAL : DMA_MEMORY; @@ -766,7 +766,7 @@ static irqreturn_t r852_irq(int irq, void *data) ret = IRQ_HANDLED; dev->card_detected = !!(card_status & R852_CARD_IRQ_INSERT); - /* we shouldn't recieve any interrupts if we wait for card + /* we shouldn't receive any interrupts if we wait for card to settle */ WARN_ON(dev->card_unstable); @@ -794,13 +794,13 @@ static irqreturn_t r852_irq(int irq, void *data) ret = IRQ_HANDLED; if (dma_status & R852_DMA_IRQ_ERROR) { - dbg("recieved dma error IRQ"); + dbg("received dma error IRQ"); r852_dma_done(dev, -EIO); complete(&dev->dma_done); goto out; } - /* recieved DMA interrupt out of nowhere? */ + /* received DMA interrupt out of nowhere? */ WARN_ON_ONCE(dev->dma_stage == 0); if (dev->dma_stage == 0) @@ -960,7 +960,7 @@ int r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id) &dev->card_detect_work, 0); - printk(KERN_NOTICE DRV_NAME ": driver loaded succesfully\n"); + printk(KERN_NOTICE DRV_NAME ": driver loaded successfully\n"); return 0; error10: diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c index 546c2f0eb2e..81bbb5ee148 100644 --- a/drivers/mtd/nand/sh_flctl.c +++ b/drivers/mtd/nand/sh_flctl.c @@ -78,7 +78,7 @@ static void start_translation(struct sh_flctl *flctl) static void timeout_error(struct sh_flctl *flctl, const char *str) { - dev_err(&flctl->pdev->dev, "Timeout occured in %s\n", str); + dev_err(&flctl->pdev->dev, "Timeout occurred in %s\n", str); } static void wait_completion(struct sh_flctl *flctl) diff --git a/drivers/mtd/nand/sm_common.c b/drivers/mtd/nand/sm_common.c index 4a8f367c295..57cc80cd01a 100644 --- a/drivers/mtd/nand/sm_common.c +++ b/drivers/mtd/nand/sm_common.c @@ -121,7 +121,7 @@ int sm_register_device(struct mtd_info *mtd, int smartmedia) if (ret) return ret; - /* Bad block marker postion */ + /* Bad block marker position */ chip->badblockpos = 0x05; chip->badblockbits = 7; chip->block_markbad = sm_block_markbad; diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c index 38fb16771f8..14c57870782 100644 --- a/drivers/mtd/nand/tmio_nand.c +++ b/drivers/mtd/nand/tmio_nand.c @@ -4,7 +4,7 @@ * Slightly murky pre-git history of the driver: * * Copyright (c) Ian Molton 2004, 2005, 2008 - * Original work, independant of sharps code. Included hardware ECC support. + * Original work, independent of sharps code. Included hardware ECC support. * Hard ECC did not work for writes in the early revisions. * Copyright (c) Dirk Opfer 2005. * Modifications developed from sharps code but -- cgit v1.2.3