From 24e8c1a611a706f51d4d9dc39b2c9977e25a54c4 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Fri, 14 Sep 2012 14:47:10 +0200 Subject: MIPS: Alchemy: merge PB1550 support into DB1550 code The PB1550 is more or less a DB1550 without the PCI IDE controller, a more complicated (read: configurable) Flash setup and some other minor changes. Like the DB1550 it can be automatically detected by reading the CPLD ID register bits. This patch adds PB1550 detection and setup to the DB1550 code. Signed-off-by: Manuel Lauss Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4337/ Signed-off-by: Ralf Baechle --- arch/mips/alchemy/devboards/pb1550.c | 244 ----------------------------------- 1 file changed, 244 deletions(-) delete mode 100644 arch/mips/alchemy/devboards/pb1550.c (limited to 'arch/mips/alchemy/devboards/pb1550.c') diff --git a/arch/mips/alchemy/devboards/pb1550.c b/arch/mips/alchemy/devboards/pb1550.c deleted file mode 100644 index b37e7de8d92..00000000000 --- a/arch/mips/alchemy/devboards/pb1550.c +++ /dev/null @@ -1,244 +0,0 @@ -/* - * Pb1550 board support. - * - * Copyright (C) 2009-2011 Manuel Lauss - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "platform.h" - -const char *get_system_type(void) -{ - return "PB1550"; -} - -void __init board_setup(void) -{ - u32 pin_func; - - bcsr_init(PB1550_BCSR_PHYS_ADDR, - PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS); - - alchemy_gpio2_enable(); - - /* - * Enable PSC1 SYNC for AC'97. Normaly done in audio driver, - * but it is board specific code, so put it here. - */ - pin_func = au_readl(SYS_PINFUNC); - au_sync(); - pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; - au_writel(pin_func, SYS_PINFUNC); - - bcsr_write(BCSR_PCMCIA, 0); /* turn off PCMCIA power */ - - printk(KERN_INFO "AMD Alchemy Pb1550 Board\n"); -} - -/******************************************************************************/ - -static int pb1550_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) -{ - if ((slot < 12) || (slot > 13) || pin == 0) - return -1; - if (slot == 12) { - switch (pin) { - case 1: return AU1500_PCI_INTB; - case 2: return AU1500_PCI_INTC; - case 3: return AU1500_PCI_INTD; - case 4: return AU1500_PCI_INTA; - } - } - if (slot == 13) { - switch (pin) { - case 1: return AU1500_PCI_INTA; - case 2: return AU1500_PCI_INTB; - case 3: return AU1500_PCI_INTC; - case 4: return AU1500_PCI_INTD; - } - } - return -1; -} - -static struct resource alchemy_pci_host_res[] = { - [0] = { - .start = AU1500_PCI_PHYS_ADDR, - .end = AU1500_PCI_PHYS_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct alchemy_pci_platdata pb1550_pci_pd = { - .board_map_irq = pb1550_map_pci_irq, -}; - -static struct platform_device pb1550_pci_host = { - .dev.platform_data = &pb1550_pci_pd, - .name = "alchemy-pci", - .id = 0, - .num_resources = ARRAY_SIZE(alchemy_pci_host_res), - .resource = alchemy_pci_host_res, -}; - -static struct resource au1550_psc2_res[] = { - [0] = { - .start = AU1550_PSC2_PHYS_ADDR, - .end = AU1550_PSC2_PHYS_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1550_PSC2_INT, - .end = AU1550_PSC2_INT, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = AU1550_DSCR_CMD0_PSC2_TX, - .end = AU1550_DSCR_CMD0_PSC2_TX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = AU1550_DSCR_CMD0_PSC2_RX, - .end = AU1550_DSCR_CMD0_PSC2_RX, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device pb1550_i2c_dev = { - .name = "au1xpsc_smbus", - .id = 0, /* bus number */ - .num_resources = ARRAY_SIZE(au1550_psc2_res), - .resource = au1550_psc2_res, -}; - -static struct mtd_partition pb1550_nand_parts[] = { - [0] = { - .name = "NAND FS 0", - .offset = 0, - .size = 8 * 1024 * 1024, - }, - [1] = { - .name = "NAND FS 1", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct au1550nd_platdata pb1550_nand_pd = { - .parts = pb1550_nand_parts, - .num_parts = ARRAY_SIZE(pb1550_nand_parts), - .devwidth = 0, /* x8 NAND default, needs fixing up */ -}; - -static struct resource pb1550_nand_res[] = { - [0] = { - .start = 0x20000000, - .end = 0x20000fff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device pb1550_nand_dev = { - .name = "au1550-nand", - .id = -1, - .resource = pb1550_nand_res, - .num_resources = ARRAY_SIZE(pb1550_nand_res), - .dev = { - .platform_data = &pb1550_nand_pd, - }, -}; - -static void __init pb1550_nand_setup(void) -{ - int boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | - ((bcsr_read(BCSR_STATUS) >> 6) & 0x1); - - switch (boot_swapboot) { - case 0: - case 2: - case 8: - case 0xC: - case 0xD: - /* x16 NAND Flash */ - pb1550_nand_pd.devwidth = 1; - /* fallthrough */ - case 1: - case 9: - case 3: - case 0xE: - case 0xF: - /* x8 NAND, already set up */ - platform_device_register(&pb1550_nand_dev); - } -} - -static int __init pb1550_dev_init(void) -{ - int swapped; - - irq_set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1550_GPIO201_205_INT, IRQF_TRIGGER_HIGH); - - /* enable both PCMCIA card irqs in the shared line */ - alchemy_gpio2_enable_int(201); - alchemy_gpio2_enable_int(202); - - /* Pb1550, like all others, also has statuschange irqs; however they're - * wired up on one of the Au1550's shared GPIO201_205 line, which also - * services the PCMCIA card interrupts. So we ignore statuschange and - * use the GPIO201_205 exclusively for card interrupts, since a) pcmcia - * drivers are used to shared irqs and b) statuschange isn't really use- - * ful anyway. - */ - db1x_register_pcmcia_socket( - AU1000_PCMCIA_ATTR_PHYS_ADDR, - AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, - AU1000_PCMCIA_MEM_PHYS_ADDR, - AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, - AU1000_PCMCIA_IO_PHYS_ADDR, - AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, - AU1550_GPIO201_205_INT, AU1550_GPIO0_INT, 0, 0, 0); - - db1x_register_pcmcia_socket( - AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008000000, - AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1, - AU1000_PCMCIA_MEM_PHYS_ADDR + 0x008000000, - AU1000_PCMCIA_MEM_PHYS_ADDR + 0x008400000 - 1, - AU1000_PCMCIA_IO_PHYS_ADDR + 0x008000000, - AU1000_PCMCIA_IO_PHYS_ADDR + 0x008010000 - 1, - AU1550_GPIO201_205_INT, AU1550_GPIO1_INT, 0, 0, 1); - - /* NAND setup */ - gpio_direction_input(206); /* GPIO206 high */ - pb1550_nand_setup(); - - swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_PB1550_SWAPBOOT; - db1x_register_norflash(128 * 1024 * 1024, 4, swapped); - platform_device_register(&pb1550_pci_host); - platform_device_register(&pb1550_i2c_dev); - - return 0; -} -arch_initcall(pb1550_dev_init); -- cgit v1.2.3