From 22b1908610dd7ff68471cd4fbd383dbdfe5e0ecd Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 29 Jun 2006 15:09:57 +0100 Subject: [ARM] nommu: provide a way for correct control register value selection Most MMU-based CPUs have a restriction on the setting of the data cache enable and mmu enable bits in the control register, whereby if the data cache is enabled, the MMU must also be enabled. Enabling the data cache without the MMU is an invalid combination. However, there are CPUs where the data cache can be enabled without the MMU. In order to allow these CPUs to take advantage of that, provide a method whereby each proc-*.S file defines the control regsiter value for use with nommu (with the MMU disabled.) Later on, when we add support for enabling the MMU on these devices, we can adjust the "crval" macro to also enable the data cache for nommu. Signed-off-by: Russell King --- arch/arm/mm/proc-arm925.S | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) (limited to 'arch/arm/mm/proc-arm925.S') diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index aaa9f985b24..07f2a888c93 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -455,11 +455,10 @@ __arm925_setup: mcr p15, 7, r0, c15, c0, 0 #endif + adr r5, {r5, r6} mrc p15, 0, r0, c1, c0 @ get control register v4 - ldr r5, arm925_cr1_clear bic r0, r0, r5 - ldr r5, arm925_cr1_set - orr r0, r0, r5 + orr r0, r0, r6 #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN orr r0, r0, #0x4000 @ .1.. .... .... .... #endif @@ -472,12 +471,9 @@ __arm925_setup: * .011 0001 ..11 1101 * */ - .type arm925_cr1_clear, #object - .type arm925_cr1_set, #object -arm925_cr1_clear: - .word 0x7f3f -arm925_cr1_set: - .word 0x313d + .type arm925_crval, #object +arm925_crval: + crval clear=0x00007f3f, mmuset=0x0000313d, ucset=0x00001130 __INITDATA -- cgit v1.2.3