From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- arch/arm/mm/proc-arm925.S | 562 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 562 insertions(+) create mode 100644 arch/arm/mm/proc-arm925.S (limited to 'arch/arm/mm/proc-arm925.S') diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S new file mode 100644 index 00000000000..ee49aa2ca78 --- /dev/null +++ b/arch/arm/mm/proc-arm925.S @@ -0,0 +1,562 @@ +/* + * linux/arch/arm/mm/arm925.S: MMU functions for ARM925 + * + * Copyright (C) 1999,2000 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * Copyright (C) 2002 RidgeRun, Inc. + * Copyright (C) 2002-2003 MontaVista Software, Inc. + * + * Update for Linux-2.6 and cache flush improvements + * Copyright (C) 2004 Nokia Corporation by Tony Lindgren + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * + * These are the low level assembler for performing cache and TLB + * functions on the arm925. + * + * CONFIG_CPU_ARM925_CPU_IDLE -> nohlt + * + * Some additional notes based on deciphering the TI TRM on OMAP-5910: + * + * NOTE1: The TI925T Configuration Register bit "D-cache clean and flush + * entry mode" must be 0 to flush the entries in both segments + * at once. This is the default value. See TRM 2-20 and 2-24 for + * more information. + * + * NOTE2: Default is the "D-cache clean and flush entry mode". It looks + * like the "Transparent mode" must be on for partial cache flushes + * to work in this mode. This mode only works with 16-bit external + * memory. See TRM 2-24 for more information. + * + * NOTE3: Write-back cache flushing seems to be flakey with devices using + * direct memory access, such as USB OHCI. The workaround is to use + * write-through cache with CONFIG_CPU_DCACHE_WRITETHROUGH (this is + * the default for OMAP-1510). + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "proc-macros.S" + +/* + * The size of one data cache line. + */ +#define CACHE_DLINESIZE 16 + +/* + * The number of data cache segments. + */ +#define CACHE_DSEGMENTS 2 + +/* + * The number of lines in a cache segment. + */ +#define CACHE_DENTRIES 256 + +/* + * This is the size at which it becomes more efficient to + * clean the whole cache, rather than using the individual + * cache line maintainence instructions. + */ +#define CACHE_DLIMIT 8192 + + .text +/* + * cpu_arm925_proc_init() + */ +ENTRY(cpu_arm925_proc_init) + mov pc, lr + +/* + * cpu_arm925_proc_fin() + */ +ENTRY(cpu_arm925_proc_fin) + stmfd sp!, {lr} + mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE + msr cpsr_c, ip + bl arm925_flush_kern_cache_all + mrc p15, 0, r0, c1, c0, 0 @ ctrl register + bic r0, r0, #0x1000 @ ...i............ + bic r0, r0, #0x000e @ ............wca. + mcr p15, 0, r0, c1, c0, 0 @ disable caches + ldmfd sp!, {pc} + +/* + * cpu_arm925_reset(loc) + * + * Perform a soft reset of the system. Put the CPU into the + * same state as it would be if it had been reset, and branch + * to what would be the reset vector. + * + * loc: location to jump to for soft reset + */ + .align 5 +ENTRY(cpu_arm925_reset) + /* Send software reset to MPU and DSP */ + mov ip, #0xff000000 + orr ip, ip, #0x00fe0000 + orr ip, ip, #0x0000ce00 + mov r4, #1 + strh r4, [ip, #0x10] + + mov ip, #0 + mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches + mcr p15, 0, ip, c7, c10, 4 @ drain WB + mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs + mrc p15, 0, ip, c1, c0, 0 @ ctrl register + bic ip, ip, #0x000f @ ............wcam + bic ip, ip, #0x1100 @ ...i...s........ + mcr p15, 0, ip, c1, c0, 0 @ ctrl register + mov pc, r0 + +/* + * cpu_arm925_do_idle() + * + * Called with IRQs disabled + */ + .align 10 +ENTRY(cpu_arm925_do_idle) + mov r0, #0 + mrc p15, 0, r1, c1, c0, 0 @ Read control register + mcr p15, 0, r0, c7, c10, 4 @ Drain write buffer + bic r2, r1, #1 << 12 + mcr p15, 0, r2, c1, c0, 0 @ Disable I cache + mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt + mcr p15, 0, r1, c1, c0, 0 @ Restore ICache enable + mov pc, lr + +/* + * flush_user_cache_all() + * + * Clean and invalidate all cache entries in a particular + * address space. + */ +ENTRY(arm925_flush_user_cache_all) + /* FALLTHROUGH */ + +/* + * flush_kern_cache_all() + * + * Clean and invalidate the entire cache. + */ +ENTRY(arm925_flush_kern_cache_all) + mov r2, #VM_EXEC + mov ip, #0 +__flush_whole_cache: +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache +#else + /* Flush entries in both segments at once, see NOTE1 above */ + mov r3, #(CACHE_DENTRIES - 1) << 4 @ 256 entries in segment +2: mcr p15, 0, r3, c7, c14, 2 @ clean+invalidate D index + subs r3, r3, #1 << 4 + bcs 2b @ entries 255 to 0 +#endif + tst r2, #VM_EXEC + mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache + mcrne p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * flush_user_cache_range(start, end, flags) + * + * Clean and invalidate a range of cache entries in the + * specified address range. + * + * - start - start address (inclusive) + * - end - end address (exclusive) + * - flags - vm_flags describing address space + */ +ENTRY(arm925_flush_user_cache_range) + mov ip, #0 + sub r3, r1, r0 @ calculate total size + cmp r3, #CACHE_DLIMIT + bgt __flush_whole_cache +1: tst r2, #VM_EXEC +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry + mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry + add r0, r0, #CACHE_DLINESIZE + mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry + mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry + add r0, r0, #CACHE_DLINESIZE +#else + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry + mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry + add r0, r0, #CACHE_DLINESIZE + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry + mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry + add r0, r0, #CACHE_DLINESIZE +#endif + cmp r0, r1 + blo 1b + tst r2, #VM_EXEC + mcrne p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * coherent_kern_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start, end. If you have non-snooping + * Harvard caches, you need to implement this function. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(arm925_coherent_kern_range) + /* FALLTHROUGH */ + +/* + * coherent_user_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start, end. If you have non-snooping + * Harvard caches, you need to implement this function. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(arm925_coherent_user_range) + bic r0, r0, #CACHE_DLINESIZE - 1 +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * flush_kern_dcache_page(void *page) + * + * Ensure no D cache aliasing occurs, either with itself or + * the I cache + * + * - addr - page aligned address + */ +ENTRY(arm925_flush_kern_dcache_page) + add r1, r0, #PAGE_SZ +1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * dma_inv_range(start, end) + * + * Invalidate (discard) the specified virtual address range. + * May not write back any entries. If 'start' or 'end' + * are not cache line aligned, those lines must be written + * back. + * + * - start - virtual start address + * - end - virtual end address + * + * (same as v4wb) + */ +ENTRY(arm925_dma_inv_range) +#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH + tst r0, #CACHE_DLINESIZE - 1 + mcrne p15, 0, r0, c7, c10, 1 @ clean D entry + tst r1, #CACHE_DLINESIZE - 1 + mcrne p15, 0, r1, c7, c10, 1 @ clean D entry +#endif + bic r0, r0, #CACHE_DLINESIZE - 1 +1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * dma_clean_range(start, end) + * + * Clean the specified virtual address range. + * + * - start - virtual start address + * - end - virtual end address + * + * (same as v4wb) + */ +ENTRY(arm925_dma_clean_range) +#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH + bic r0, r0, #CACHE_DLINESIZE - 1 +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b +#endif + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * dma_flush_range(start, end) + * + * Clean and invalidate the specified virtual address range. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(arm925_dma_flush_range) + bic r0, r0, #CACHE_DLINESIZE - 1 +1: +#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH + mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry +#else + mcr p15, 0, r0, c7, c10, 1 @ clean D entry +#endif + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +ENTRY(arm925_cache_fns) + .long arm925_flush_kern_cache_all + .long arm925_flush_user_cache_all + .long arm925_flush_user_cache_range + .long arm925_coherent_kern_range + .long arm925_coherent_user_range + .long arm925_flush_kern_dcache_page + .long arm925_dma_inv_range + .long arm925_dma_clean_range + .long arm925_dma_flush_range + +ENTRY(cpu_arm925_dcache_clean_area) +#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + add r0, r0, #CACHE_DLINESIZE + subs r1, r1, #CACHE_DLINESIZE + bhi 1b +#endif + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +/* =============================== PageTable ============================== */ + +/* + * cpu_arm925_switch_mm(pgd) + * + * Set the translation base pointer to be as described by pgd. + * + * pgd: new page tables + */ + .align 5 +ENTRY(cpu_arm925_switch_mm) + mov ip, #0 +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache +#else + /* Flush entries in bothe segments at once, see NOTE1 above */ + mov r3, #(CACHE_DENTRIES - 1) << 4 @ 256 entries in segment +2: mcr p15, 0, r3, c7, c14, 2 @ clean & invalidate D index + subs r3, r3, #1 << 4 + bcs 2b @ entries 255 to 0 +#endif + mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache + mcr p15, 0, ip, c7, c10, 4 @ drain WB + mcr p15, 0, r0, c2, c0, 0 @ load page table pointer + mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs + mov pc, lr + +/* + * cpu_arm925_set_pte(ptep, pte) + * + * Set a PTE and flush it out + */ + .align 5 +ENTRY(cpu_arm925_set_pte) + str r1, [r0], #-2048 @ linux version + + eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY + + bic r2, r1, #PTE_SMALL_AP_MASK + bic r2, r2, #PTE_TYPE_MASK + orr r2, r2, #PTE_TYPE_SMALL + + tst r1, #L_PTE_USER @ User? + orrne r2, r2, #PTE_SMALL_AP_URO_SRW + + tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty? + orreq r2, r2, #PTE_SMALL_AP_UNO_SRW + + tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young? + movne r2, #0 + +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + eor r3, r2, #0x0a @ C & small page? + tst r3, #0x0b + biceq r2, r2, #4 +#endif + str r2, [r0] @ hardware version + mov r0, r0 +#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH + mcr p15, 0, r0, c7, c10, 1 @ clean D entry +#endif + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + + __INIT + + .type __arm925_setup, #function +__arm925_setup: + mov r0, #0 +#if defined(CONFIG_CPU_ICACHE_STREAMING_DISABLE) + orr r0,r0,#1 << 7 +#endif + + /* Transparent on, D-cache clean & flush mode. See NOTE2 above */ + orr r0,r0,#1 << 1 @ transparent mode on + mcr p15, 0, r0, c15, c1, 0 @ write TI config register + + mov r0, #0 + mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4 + mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4 + mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4 + +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + mov r0, #4 @ disable write-back on caches explicitly + mcr p15, 7, r0, c15, c0, 0 +#endif + + mrc p15, 0, r0, c1, c0 @ get control register v4 + ldr r5, arm925_cr1_clear + bic r0, r0, r5 + ldr r5, arm925_cr1_set + orr r0, r0, r5 +#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN + orr r0, r0, #0x4000 @ .1.. .... .... .... +#endif + mov pc, lr + .size __arm925_setup, . - __arm925_setup + + /* + * R + * .RVI ZFRS BLDP WCAM + * .011 0001 ..11 1101 + * + */ + .type arm925_cr1_clear, #object + .type arm925_cr1_set, #object +arm925_cr1_clear: + .word 0x7f3f +arm925_cr1_set: + .word 0x313d + + __INITDATA + +/* + * Purpose : Function pointers used to access above functions - all calls + * come through these + */ + .type arm925_processor_functions, #object +arm925_processor_functions: + .word v4t_early_abort + .word cpu_arm925_proc_init + .word cpu_arm925_proc_fin + .word cpu_arm925_reset + .word cpu_arm925_do_idle + .word cpu_arm925_dcache_clean_area + .word cpu_arm925_switch_mm + .word cpu_arm925_set_pte + .size arm925_processor_functions, . - arm925_processor_functions + + .section ".rodata" + + .type cpu_arch_name, #object +cpu_arch_name: + .asciz "armv4t" + .size cpu_arch_name, . - cpu_arch_name + + .type cpu_elf_name, #object +cpu_elf_name: + .asciz "v4" + .size cpu_elf_name, . - cpu_elf_name + + .type cpu_arm925_name, #object +cpu_arm925_name: + .ascii "ARM925T" +#ifndef CONFIG_CPU_ICACHE_DISABLE + .ascii "i" +#endif +#ifndef CONFIG_CPU_DCACHE_DISABLE + .ascii "d" +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + .ascii "(wt)" +#else + .ascii "(wb)" +#endif +#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN + .ascii "RR" +#endif +#endif + .ascii "\0" + .size cpu_arm925_name, . - cpu_arm925_name + + .align + + .section ".proc.info", #alloc, #execinstr + + .type __arm925_proc_info,#object +__arm925_proc_info: + .long 0x54029250 + .long 0xfffffff0 + .long PMD_TYPE_SECT | \ + PMD_BIT4 | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + b __arm925_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB + .long cpu_arm925_name + .long arm925_processor_functions + .long v4wbi_tlb_fns + .long v4wb_user_fns + .long arm925_cache_fns + .size __arm925_proc_info, . - __arm925_proc_info + + .type __arm915_proc_info,#object +__arm915_proc_info: + .long 0x54029150 + .long 0xfffffff0 + .long PMD_TYPE_SECT | \ + PMD_BIT4 | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + b __arm925_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB + .long cpu_arm925_name + .long arm925_processor_functions + .long v4wbi_tlb_fns + .long v4wb_user_fns + .long arm925_cache_fns + .size __arm925_proc_info, . - __arm925_proc_info -- cgit v1.2.3