From d090dddaba7c8da6401bb259340dce05ca32f564 Mon Sep 17 00:00:00 2001 From: "Hyok S. Choi" Date: Wed, 28 Jun 2006 14:10:01 +0100 Subject: [ARM] nommu: Initial uCLinux support for MMU-based CPUs In noMMU mode, various of functions which are defined in mm/proc-*.S is not valid or needed to be avoided. i.g. switch_mm is not needed, just returns and this makes the I & D caches are valid which shows great improvement of performance including task switching and IPC. Signed-off-by: Hyok S. Choi Signed-off-by: Russell King --- arch/arm/mm/proc-arm720.S | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch/arm/mm/proc-arm720.S') diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index 26f00ee2ad9..86102467d37 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -4,6 +4,7 @@ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com) * Rob Scott (rscott@mtrob.fdns.net) * Copyright (C) 2000 ARM Limited, Deep Blue Solutions Ltd. + * hacked for non-paged-MM by Hyok S. Choi, 2004. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -29,6 +30,7 @@ * out of 'proc-arm6,7.S' per RMK discussion * 07-25-2000 SJH Added idle function. * 08-25-2000 DBS Updated for integration of ARM Ltd version. + * 04-20-2004 HSC modified for non-paged memory management mode. */ #include #include @@ -75,10 +77,12 @@ ENTRY(cpu_arm720_do_idle) * the new. */ ENTRY(cpu_arm720_switch_mm) +#ifdef CONFIG_MMU mov r1, #0 mcr p15, 0, r1, c7, c7, 0 @ invalidate cache mcr p15, 0, r0, c2, c0, 0 @ update page table ptr mcr p15, 0, r1, c8, c7, 0 @ flush TLB (v4) +#endif mov pc, lr /* @@ -89,6 +93,7 @@ ENTRY(cpu_arm720_switch_mm) */ .align 5 ENTRY(cpu_arm720_set_pte) +#ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY @@ -107,6 +112,7 @@ ENTRY(cpu_arm720_set_pte) movne r2, #0 str r2, [r0] @ hardware version +#endif mov pc, lr /* @@ -117,7 +123,9 @@ ENTRY(cpu_arm720_set_pte) ENTRY(cpu_arm720_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate cache +#ifdef CONFIG_MMU mcr p15, 0, ip, c8, c7, 0 @ flush TLB (v4) +#endif mrc p15, 0, ip, c1, c0, 0 @ get ctrl register bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x2100 @ ..v....s........ @@ -130,7 +138,9 @@ ENTRY(cpu_arm720_reset) __arm710_setup: mov r0, #0 mcr p15, 0, r0, c7, c7, 0 @ invalidate caches +#ifdef CONFIG_MMU mcr p15, 0, r0, c8, c7, 0 @ flush TLB (v4) +#endif mrc p15, 0, r0, c1, c0 @ get control register ldr r5, arm710_cr1_clear bic r0, r0, r5 @@ -156,7 +166,9 @@ arm710_cr1_set: __arm720_setup: mov r0, #0 mcr p15, 0, r0, c7, c7, 0 @ invalidate caches +#ifdef CONFIG_MMU mcr p15, 0, r0, c8, c7, 0 @ flush TLB (v4) +#endif mrc p15, 0, r0, c1, c0 @ get control register ldr r5, arm720_cr1_clear bic r0, r0, r5 -- cgit v1.2.3