From d8f089d2ad35861c432618900fa08ca70c168d76 Mon Sep 17 00:00:00 2001 From: Siddarth Gore Date: Mon, 22 Mar 2010 02:28:20 -0700 Subject: [ARM] Kirkwood: Marvell GuruPlug support GuruPlug Standard: 1 Gb Ethernet, 2 USB 2.0 GuruPlug Plus: 2 Gb Ethernet, 2 USB 2.0, 1 eSATA, 1 uSD slot References: http://www.globalscaletechnologies.com/t-guruplugdetails.aspx http://plugcomputer.org This patch is for GuruPlug Plus, but it supports Standard version as well. Signed-off-by: Siddarth Gore Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/guruplug-setup.c | 131 ++++++++++++++++++++++++++++++++ 1 file changed, 131 insertions(+) create mode 100644 arch/arm/mach-kirkwood/guruplug-setup.c (limited to 'arch/arm/mach-kirkwood/guruplug-setup.c') diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c new file mode 100644 index 00000000000..54d07c89d4f --- /dev/null +++ b/arch/arm/mach-kirkwood/guruplug-setup.c @@ -0,0 +1,131 @@ +/* + * arch/arm/mach-kirkwood/guruplug-setup.c + * + * Marvell GuruPlug Reference Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mtd_partition guruplug_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_1M + }, { + .name = "uImage", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_4M + }, { + .name = "root", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct mv643xx_eth_platform_data guruplug_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv643xx_eth_platform_data guruplug_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(1), +}; + +static struct mv_sata_platform_data guruplug_sata_data = { + .n_ports = 1, +}; + +static struct mvsdio_platform_data guruplug_mvsdio_data = { + /* unfortunately the CD signal has not been connected */ +}; + +static struct gpio_led guruplug_led_pins[] = { + { + .name = "guruplug:red:health", + .gpio = 46, + .active_low = 1, + }, + { + .name = "guruplug:green:health", + .gpio = 47, + .active_low = 1, + }, + { + .name = "guruplug:red:wmode", + .gpio = 48, + .active_low = 1, + }, + { + .name = "guruplug:green:wmode", + .gpio = 49, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data guruplug_led_data = { + .leds = guruplug_led_pins, + .num_leds = ARRAY_SIZE(guruplug_led_pins), +}; + +static struct platform_device guruplug_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &guruplug_led_data, + } +}; + +static unsigned int guruplug_mpp_config[] __initdata = { + MPP46_GPIO, /* M_RLED */ + MPP47_GPIO, /* M_GLED */ + MPP48_GPIO, /* B_RLED */ + MPP49_GPIO, /* B_GLED */ + 0 +}; + +static void __init guruplug_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(guruplug_mpp_config); + + kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(guruplug_nand_parts), 25); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&guruplug_ge00_data); + kirkwood_ge01_init(&guruplug_ge01_data); + kirkwood_sata_init(&guruplug_sata_data); + kirkwood_sdio_init(&guruplug_mvsdio_data); + + platform_device_register(&guruplug_leds); +} + +MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board") + /* Maintainer: Siddarth Gore */ + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = guruplug_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END -- cgit v1.2.3