From 027c0a6af42efa4f2f6034421349bd26a3ca4923 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 26 Nov 2012 14:11:22 -0200 Subject: ARM: imx: Move platform-mx2-emma to arch/arm/mach-imx/devices Move platform-mx2-emma to arch/arm/mach-imx/devices and fix the following build error: make[2]: *** No rule to make target `arch/arm/mach-imx/devices/platform-mx2-emma.o', needed by `arch/arm/mach-imx/devices/built-in.o'. Stop. Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/devices/platform-mx2-emma.c | 40 +++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 arch/arm/mach-imx/devices/platform-mx2-emma.c (limited to 'arch/arm/mach-imx/devices/platform-mx2-emma.c') diff --git a/arch/arm/mach-imx/devices/platform-mx2-emma.c b/arch/arm/mach-imx/devices/platform-mx2-emma.c new file mode 100644 index 00000000000..11bd01d402f --- /dev/null +++ b/arch/arm/mach-imx/devices/platform-mx2-emma.c @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include "../hardware.h" +#include "devices-common.h" + +#define imx_mx2_emmaprp_data_entry_single(soc) \ + { \ + .iobase = soc ## _EMMAPRP_BASE_ADDR, \ + .iosize = SZ_32, \ + .irq = soc ## _INT_EMMAPRP, \ + } + +#ifdef CONFIG_SOC_IMX27 +const struct imx_mx2_emma_data imx27_mx2_emmaprp_data __initconst = + imx_mx2_emmaprp_data_entry_single(MX27); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +struct platform_device *__init imx_add_mx2_emmaprp( + const struct imx_mx2_emma_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + return imx_add_platform_device_dmamask("m2m-emmaprp", 0, + res, 2, NULL, 0, DMA_BIT_MASK(32)); +} -- cgit v1.2.3