From db0d4db22a78d31c59087f7057b8f1612fecc35d Mon Sep 17 00:00:00 2001
From: Marc Zyngier <marc.zyngier@arm.com>
Date: Sat, 12 Nov 2011 16:09:49 +0000
Subject: ARM: gic: allow GIC to support non-banked setups

The GIC support code is heavily using the fact that hardware
implementations are exposing banked registers. Unfortunately, it
looks like at least one GIC implementation (EXYNOS) offers both
the distributor and the CPU interfaces at different addresses,
depending on the CPU.

This problem is solved by allowing the distributor and CPU interface
addresses to be per-cpu variables for the platforms that require it.
The EXYNOS code is updated not to mess with the GIC internals while
handling interrupts, and struct gic_chip_data is back to being private.
The DT binding for the gic is updated to allow an optional "cpu-offset"
value, which is used to compute the various base addresses.

Finally, a new config option (GIC_NON_BANKED) is used to control this
feature, so the overhead is only present on kernels compiled with
support for EXYNOS.

Tested on Origen (EXYNOS4) and Panda (OMAP4).

Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
 arch/arm/mach-exynos/cpu.c     | 16 +---------------
 arch/arm/mach-exynos/platsmp.c | 28 +---------------------------
 2 files changed, 2 insertions(+), 42 deletions(-)

(limited to 'arch/arm/mach-exynos')

diff --git a/arch/arm/mach-exynos/cpu.c b/arch/arm/mach-exynos/cpu.c
index 90ec247f3b3..e92e464bdbb 100644
--- a/arch/arm/mach-exynos/cpu.c
+++ b/arch/arm/mach-exynos/cpu.c
@@ -207,27 +207,13 @@ void __init exynos4_init_clocks(int xtal)
 	exynos4_setup_clocks();
 }
 
-static void exynos4_gic_irq_fix_base(struct irq_data *d)
-{
-	struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
-
-	gic_data->cpu_base = S5P_VA_GIC_CPU +
-			    (gic_bank_offset * smp_processor_id());
-
-	gic_data->dist_base = S5P_VA_GIC_DIST +
-			    (gic_bank_offset * smp_processor_id());
-}
-
 void __init exynos4_init_irq(void)
 {
 	int irq;
 
 	gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
 
-	gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
-	gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
-	gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
-	gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
+	gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset);
 
 	for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
 
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 69ffb2fb387..60bc45e3e70 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -32,7 +32,6 @@
 
 #include <plat/cpu.h>
 
-extern unsigned int gic_bank_offset;
 extern void exynos4_secondary_startup(void);
 
 #define CPU1_BOOT_REG		(samsung_rev() == EXYNOS4210_REV_1_1 ? \
@@ -65,31 +64,6 @@ static void __iomem *scu_base_addr(void)
 
 static DEFINE_SPINLOCK(boot_lock);
 
-static void __cpuinit exynos4_gic_secondary_init(void)
-{
-	void __iomem *dist_base = S5P_VA_GIC_DIST +
-				(gic_bank_offset * smp_processor_id());
-	void __iomem *cpu_base = S5P_VA_GIC_CPU +
-				(gic_bank_offset * smp_processor_id());
-	int i;
-
-	/*
-	 * Deal with the banked PPI and SGI interrupts - disable all
-	 * PPI interrupts, ensure all SGI interrupts are enabled.
-	 */
-	__raw_writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
-	__raw_writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
-
-	/*
-	 * Set priority on PPI and SGI interrupts
-	 */
-	for (i = 0; i < 32; i += 4)
-		__raw_writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
-
-	__raw_writel(0xf0, cpu_base + GIC_CPU_PRIMASK);
-	__raw_writel(1, cpu_base + GIC_CPU_CTRL);
-}
-
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
 	/*
@@ -97,7 +71,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 * core (e.g. timer irq), then they will not have been enabled
 	 * for us: do so
 	 */
-	exynos4_gic_secondary_init();
+	gic_secondary_init(0);
 
 	/*
 	 * let the primary processor know we're out of the
-- 
cgit v1.2.3


From 4e44d2cb95bd93abe16a131dbcd4c052ae36665f Mon Sep 17 00:00:00 2001
From: Marc Zyngier <marc.zyngier@arm.com>
Date: Mon, 30 May 2011 11:04:53 +0100
Subject: ARM: exynos4: convert to CONFIG_MULTI_IRQ_HANDLER

Convert the Exynos4 platforms to be using the gic_handle_irq
function as their primary interrupt handler.

Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
 arch/arm/mach-exynos/cpu.c                      |  4 +-
 arch/arm/mach-exynos/include/mach/entry-macro.S | 75 -------------------------
 arch/arm/mach-exynos/mach-armlex4210.c          |  2 +
 arch/arm/mach-exynos/mach-nuri.c                |  2 +
 arch/arm/mach-exynos/mach-origen.c              |  2 +
 arch/arm/mach-exynos/mach-smdk4x12.c            |  3 +
 arch/arm/mach-exynos/mach-smdkv310.c            |  3 +
 arch/arm/mach-exynos/mach-universal_c210.c      |  4 +-
 8 files changed, 17 insertions(+), 78 deletions(-)

(limited to 'arch/arm/mach-exynos')

diff --git a/arch/arm/mach-exynos/cpu.c b/arch/arm/mach-exynos/cpu.c
index e92e464bdbb..6e34485caa3 100644
--- a/arch/arm/mach-exynos/cpu.c
+++ b/arch/arm/mach-exynos/cpu.c
@@ -15,6 +15,7 @@
 #include <asm/mach/irq.h>
 
 #include <asm/proc-fns.h>
+#include <asm/exception.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/hardware/gic.h>
 
@@ -33,8 +34,6 @@
 #include <mach/regs-irq.h>
 #include <mach/regs-pmu.h>
 
-unsigned int gic_bank_offset __read_mostly;
-
 extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
 			 unsigned int irq_start);
 extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
@@ -210,6 +209,7 @@ void __init exynos4_init_clocks(int xtal)
 void __init exynos4_init_irq(void)
 {
 	int irq;
+	unsigned int bank_offset;
 
 	gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
 
diff --git a/arch/arm/mach-exynos/include/mach/entry-macro.S b/arch/arm/mach-exynos/include/mach/entry-macro.S
index f5e9fd8e37b..3ba4f547534 100644
--- a/arch/arm/mach-exynos/include/mach/entry-macro.S
+++ b/arch/arm/mach-exynos/include/mach/entry-macro.S
@@ -9,83 +9,8 @@
  * warranty of any kind, whether express or implied.
 */
 
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <asm/hardware/gic.h>
-
 		.macro	disable_fiq
 		.endm
 
-		.macro  get_irqnr_preamble, base, tmp
-		mov	\tmp, #0
-
-		mrc	p15, 0, \base, c0, c0, 5
-		and	\base, \base, #3
-		cmp	\base, #0
-		beq	1f
-
-		ldr	\tmp, =gic_bank_offset
-		ldr	\tmp, [\tmp]
-		cmp	\base, #1
-		beq	1f
-
-		cmp	\base, #2
-		addeq	\tmp, \tmp, \tmp
-		addne	\tmp, \tmp, \tmp, LSL #1
-
-1:		ldr	\base, =gic_cpu_base_addr
-		ldr	\base, [\base]
-		add	\base, \base, \tmp
-		.endm
-
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
-
-		/*
-		 * The interrupt numbering scheme is defined in the
-		 * interrupt controller spec.  To wit:
-		 *
-		 * Interrupts 0-15 are IPI
-		 * 16-28 are reserved
-		 * 29-31 are local.  We allow 30 to be used for the watchdog.
-		 * 32-1020 are global
-		 * 1021-1022 are reserved
-		 * 1023 is "spurious" (no interrupt)
-		 *
-		 * For now, we ignore all local interrupts so only return an interrupt if it's
-		 * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
-		 *
-		 * A simple read from the controller will tell us the number of the highest
-                 * priority enabled interrupt.  We then just need to check whether it is in the
-		 * valid range for an IRQ (30-1020 inclusive).
-		 */
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
-
-		ldr	\tmp, =1021
-
-		bic     \irqnr, \irqstat, #0x1c00
-
-		cmp     \irqnr, #15
-		cmpcc	\irqnr, \irqnr
-		cmpne	\irqnr, \tmp
-		cmpcs	\irqnr, \irqnr
-		addne	\irqnr, \irqnr, #32
-
-		.endm
-
-		/* We assume that irqstat (the raw value of the IRQ acknowledge
-		 * register) is preserved from the macro above.
-		 * If there is an IPI, we immediately signal end of interrupt on the
-		 * controller, since this requires the original irqstat value which
-		 * we won't easily be able to recreate later.
-		 */
-
-		.macro test_for_ipi, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		cmp	\irqnr, #16
-		strcc	\irqstat, [\base, #GIC_CPU_EOI]
-		cmpcs	\irqnr, \irqnr
-		.endm
diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c
index f0ca6c157d2..49da3089249 100644
--- a/arch/arm/mach-exynos/mach-armlex4210.c
+++ b/arch/arm/mach-exynos/mach-armlex4210.c
@@ -16,6 +16,7 @@
 #include <linux/smsc911x.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/cpu.h>
@@ -210,6 +211,7 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= armlex4210_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= armlex4210_machine_init,
 	.timer		= &exynos4_timer,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 236bbe18716..5acec11821a 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -32,6 +32,7 @@
 #include <media/v4l2-mediabus.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/adc.h>
@@ -1333,6 +1334,7 @@ MACHINE_START(NURI, "NURI")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= nuri_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= nuri_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve        = &nuri_reserve,
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index f80b563f2be..5561b06c38e 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -22,6 +22,7 @@
 #include <linux/lcd.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <video/platform_lcd.h>
@@ -694,6 +695,7 @@ MACHINE_START(ORIGEN, "ORIGEN")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= origen_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= origen_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve	= &origen_reserve,
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index fcf2e0e23d5..722d82d7f21 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -21,6 +21,7 @@
 #include <linux/serial_core.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/backlight.h>
@@ -287,6 +288,7 @@ MACHINE_START(SMDK4212, "SMDK4212")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdk4x12_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdk4x12_machine_init,
 	.timer		= &exynos4_timer,
 MACHINE_END
@@ -297,6 +299,7 @@ MACHINE_START(SMDK4412, "SMDK4412")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdk4x12_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdk4x12_machine_init,
 	.timer		= &exynos4_timer,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index cec2afabe7b..edc60b6108e 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -21,6 +21,7 @@
 #include <linux/pwm_backlight.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <video/platform_lcd.h>
@@ -375,6 +376,7 @@ MACHINE_START(SMDKV310, "SMDKV310")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdkv310_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdkv310_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve	= &smdkv310_reserve,
@@ -385,6 +387,7 @@ MACHINE_START(SMDKC210, "SMDKC210")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdkv310_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdkv310_machine_init,
 	.timer		= &exynos4_timer,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index a2a177ff4b4..48e85b03cb1 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -21,9 +21,10 @@
 #include <linux/mmc/host.h>
 #include <linux/i2c-gpio.h>
 #include <linux/i2c/mcs.h>
-#include <linux/i2c/atmel_mxt_ts.h>
+ <linux/i2c/atmel_mxt_ts.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
@@ -1058,6 +1059,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= universal_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= universal_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve        = &universal_reserve,
-- 
cgit v1.2.3


From 63b870f149cdcd253ae8da88d8b5a0b43a68965c Mon Sep 17 00:00:00 2001
From: Shawn Guo <shawn.guo@linaro.org>
Date: Thu, 17 Nov 2011 01:19:11 +0900
Subject: ARM: EXYNOS: remove exynos4_scu_enable()

The exynos4_scu_enable() is a duplication of scu_enable().  Since
commit '26a527e ARM: 7100/1: smp_scu: remove __init annotation from
scu_enable()' makes scu_enable() available for non-init codes, exynos
can directly call scu_enable() and save exynos4_scu_enable() now.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
[kgene.kim@samsung.com: added missing header]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos/pm.c | 24 ++----------------------
 1 file changed, 2 insertions(+), 22 deletions(-)

(limited to 'arch/arm/mach-exynos')

diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 509a435afd4..4093fea849c 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -23,6 +23,7 @@
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
+#include <asm/smp_scu.h>
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
@@ -213,27 +214,6 @@ static int exynos4_pm_add(struct sys_device *sysdev)
 	return 0;
 }
 
-/* This function copy from linux/arch/arm/kernel/smp_scu.c */
-
-void exynos4_scu_enable(void __iomem *scu_base)
-{
-	u32 scu_ctrl;
-
-	scu_ctrl = __raw_readl(scu_base);
-	/* already enabled? */
-	if (scu_ctrl & 1)
-		return;
-
-	scu_ctrl |= 1;
-	__raw_writel(scu_ctrl, scu_base);
-
-	/*
-	 * Ensure that the data accessed by CPU0 before the SCU was
-	 * initialised is visible to the other CPUs.
-	 */
-	flush_cache_all();
-}
-
 static unsigned long pll_base_rate;
 
 static void exynos4_restore_pll(void)
@@ -402,7 +382,7 @@ static void exynos4_pm_resume(void)
 
 	exynos4_restore_pll();
 
-	exynos4_scu_enable(S5P_VA_SCU);
+	scu_enable(S5P_VA_SCU);
 
 #ifdef CONFIG_CACHE_L2X0
 	s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save));
-- 
cgit v1.2.3


From d0e6b2236a26711939bfcdd97370fedcd526a191 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nicolas.pitre@linaro.org>
Date: Thu, 15 Sep 2011 16:30:54 -0400
Subject: ARM: big removal of now unused vmalloc.h files

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-exynos/include/mach/vmalloc.h | 22 ----------------------
 1 file changed, 22 deletions(-)
 delete mode 100644 arch/arm/mach-exynos/include/mach/vmalloc.h

(limited to 'arch/arm/mach-exynos')

diff --git a/arch/arm/mach-exynos/include/mach/vmalloc.h b/arch/arm/mach-exynos/include/mach/vmalloc.h
deleted file mode 100644
index 284330e571d..00000000000
--- a/arch/arm/mach-exynos/include/mach/vmalloc.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/vmalloc.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * Based on arch/arm/mach-s5p6440/include/mach/vmalloc.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * EXYNOS4 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H __FILE__
-
-#define VMALLOC_END	0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
-- 
cgit v1.2.3


From 69676c37290317910543ad0bd14e70544fb3dbf2 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Thu, 1 Dec 2011 23:24:30 +0800
Subject: ARM: exynos4: Fix build error due to 'gic_bank_offset' undeclared

Fix below build error:
  CC      arch/arm/mach-exynos/cpu.o
arch/arm/mach-exynos/cpu.c: In function 'exynos4_init_irq':
arch/arm/mach-exynos/cpu.c:245: error: 'gic_bank_offset' undeclared (first use in this function)
arch/arm/mach-exynos/cpu.c:245: error: (Each undeclared identifier is reported only once
arch/arm/mach-exynos/cpu.c:245: error: for each function it appears in.)
arch/arm/mach-exynos/cpu.c:243: warning: unused variable 'bank_offset'
make[1]: *** [arch/arm/mach-exynos/cpu.o] Error 1
make: *** [arch/arm/mach-exynos] Error 2

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
 arch/arm/mach-exynos/cpu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm/mach-exynos')

diff --git a/arch/arm/mach-exynos/cpu.c b/arch/arm/mach-exynos/cpu.c
index 6e34485caa3..22316cb31a8 100644
--- a/arch/arm/mach-exynos/cpu.c
+++ b/arch/arm/mach-exynos/cpu.c
@@ -209,7 +209,7 @@ void __init exynos4_init_clocks(int xtal)
 void __init exynos4_init_irq(void)
 {
 	int irq;
-	unsigned int bank_offset;
+	unsigned int gic_bank_offset;
 
 	gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
 
-- 
cgit v1.2.3


From e1d95eaf005b7edd3e63ba9312994c3f834a78ac Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Thu, 1 Dec 2011 23:25:45 +0800
Subject: ARM: exynos4: Fix build error

Trivial fix to fix below build error:

  CC      arch/arm/mach-exynos/mach-universal_c210.o
arch/arm/mach-exynos/mach-universal_c210.c:24: error: expected identifier or '(' before '<' token

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
 arch/arm/mach-exynos/mach-universal_c210.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm/mach-exynos')

diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 48e85b03cb1..cfc7d5076f5 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -21,7 +21,7 @@
 #include <linux/mmc/host.h>
 #include <linux/i2c-gpio.h>
 #include <linux/i2c/mcs.h>
- <linux/i2c/atmel_mxt_ts.h>
+#include <linux/i2c/atmel_mxt_ts.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
-- 
cgit v1.2.3


From ce5ea9f3767e8589521319cae2eb6e05c52bd056 Mon Sep 17 00:00:00 2001
From: Dave Martin <dave.martin@linaro.org>
Date: Tue, 29 Nov 2011 15:56:19 +0000
Subject: ARM: l2x0/pl310: Refactor Kconfig to be more maintainable

Making CACHE_L2X0 depend on (huge list of MACH_ and ARCH_ configs)
is bothersome to maintain and likely to lead to merge conflicts.

This patch moves the knowledge of which platforms have a L2x0 or
PL310 cache controller to the individual machines.  To enable this,
a new MIGHT_HAVE_CACHE_L2X0 config option is introduced to allow
machines to indicate that they may have such a cache controller
independently of each other.

Boards/SoCs which cannot reliably operate without the L2 cache
controller support will need to select CACHE_L2X0 directly from
their own Kconfigs instead.  This applies to some TrustZone-enabled
boards where Linux runs in the Normal World, for example.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
        (for cns3xxx)
Acked-by: Tony Lindgren <tony@atomide.com>
        (for omap)
Acked-by: Shawn Guo <shawn.guo@linaro.org>
        (for imx)
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
        (for exynos)
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
        (for imx)
Acked-by: Olof Johansson <olof@lixom.net>
        (for tegra)
---
 arch/arm/mach-exynos/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm/mach-exynos')

diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 724ec0f3560..7f2347bd6cc 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -17,6 +17,7 @@ choice
 
 config ARCH_EXYNOS4
 	bool "SAMSUNG EXYNOS4"
+	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Samsung EXYNOS4 SoCs based systems
 
-- 
cgit v1.2.3


From 3b55658aefbf82646a246f3c8a14b9b8a24198a9 Mon Sep 17 00:00:00 2001
From: Dave Martin <dave.martin@linaro.org>
Date: Wed, 7 Dec 2011 15:38:04 +0000
Subject: ARM: SMP: Refactor Kconfig to be more maintainable

Making SMP depend on (huge list of MACH_ and ARCH_ configs) is
bothersome to maintain and likely to lead to merge conflicts.

This patch moves the knowledge of which platforms are SMP-capable
to the individual machines.  To enable this, a new HAVE_SMP config
option is introduced to allow machines to indicate that they can
run in a SMP configuration.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
        (for nomadik, ux500)
Acked-by: Tony Lindgren <tony@atomide.com>
        (for omap)
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
        (for exynos)
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
        (for imx)
Acked-by: Olof Johansson <olof@lixom.net>
        (for tegra)
---
 arch/arm/mach-exynos/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm/mach-exynos')

diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 7f2347bd6cc..e1efbca2a53 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -17,6 +17,7 @@ choice
 
 config ARCH_EXYNOS4
 	bool "SAMSUNG EXYNOS4"
+	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Samsung EXYNOS4 SoCs based systems
-- 
cgit v1.2.3


From 321655efad26e03141b0bbfcfa9875056c1acb65 Mon Sep 17 00:00:00 2001
From: Jingoo Han <jg1.han@samsung.com>
Date: Sat, 24 Dec 2011 11:58:32 +0900
Subject: ARM: EXYNOS: Use gpio_request_one

By using gpio_request_one it is possible to set the direction
and initial value in one shot. Thus, using gpio_request_one can
make the code simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos/mach-nuri.c           |  9 ++-------
 arch/arm/mach-exynos/mach-smdkv310.c       |  4 +---
 arch/arm/mach-exynos/mach-universal_c210.c | 10 +++-------
 3 files changed, 6 insertions(+), 17 deletions(-)

(limited to 'arch/arm/mach-exynos')

diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 236bbe18716..205dfed4121 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -247,13 +247,8 @@ static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power)
 
 static int nuri_bl_init(struct device *dev)
 {
-	int ret, gpio = EXYNOS4_GPE2(3);
-
-	ret = gpio_request(gpio, "LCD_LDO_EN");
-	if (!ret)
-		gpio_direction_output(gpio, 0);
-
-	return ret;
+	return gpio_request_one(EXYNOS4_GPE2(3), GPIOF_OUT_INIT_LOW,
+				"LCD_LD0_EN");
 }
 
 static int nuri_bl_notify(struct device *dev, int brightness)
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index cec2afabe7b..cbf31bd0e2c 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -129,9 +129,7 @@ static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
 		gpio_free(EXYNOS4_GPD0(1));
 #endif
 		/* fire nRESET on power up */
-		gpio_request(EXYNOS4_GPX0(6), "GPX0");
-
-		gpio_direction_output(EXYNOS4_GPX0(6), 1);
+		gpio_request_one(EXYNOS4_GPX0(6), GPIOF_OUT_INIT_HIGH, "GPX0");
 		mdelay(100);
 
 		gpio_set_value(EXYNOS4_GPX0(6), 0);
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index a2a177ff4b4..0a04cd643b0 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -608,8 +608,7 @@ static void __init universal_tsp_init(void)
 
 	/* TSP_LDO_ON: XMDMADDR_11 */
 	gpio = EXYNOS4_GPE2(3);
-	gpio_request(gpio, "TSP_LDO_ON");
-	gpio_direction_output(gpio, 1);
+	gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "TSP_LDO_ON");
 	gpio_export(gpio, 0);
 
 	/* TSP_INT: XMDMADDR_7 */
@@ -669,8 +668,7 @@ static void __init universal_touchkey_init(void)
 	i2c_gpio12_devs[0].irq = gpio_to_irq(gpio);
 
 	gpio = EXYNOS4_GPE3(3);			/* XMDMDATA_3 */
-	gpio_request(gpio, "3_TOUCH_EN");
-	gpio_direction_output(gpio, 1);
+	gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "3_TOUCH_EN");
 }
 
 static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = {
@@ -1000,9 +998,7 @@ static void __init universal_map_io(void)
 void s5p_tv_setup(void)
 {
 	/* direct HPD to HDMI chip */
-	gpio_request(EXYNOS4_GPX3(7), "hpd-plug");
-
-	gpio_direction_input(EXYNOS4_GPX3(7));
+	gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
 	s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
 	s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
 
-- 
cgit v1.2.3


From 9edf52621de9b1822be2576f66269ad2cb6292b6 Mon Sep 17 00:00:00 2001
From: Thomas Abraham <thomas.abraham@linaro.org>
Date: Wed, 28 Dec 2011 15:07:32 +0900
Subject: ARM: EXYNOS: Remove duplicated SROMC static memory mapping

SROMC static memory mapping is included in the common s5p initialization
code. Hence, remove the duplicated SROMC static memory mapping for EXYNOS.

Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Cc: stable@kernel.org
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos/cpu.c | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'arch/arm/mach-exynos')

diff --git a/arch/arm/mach-exynos/cpu.c b/arch/arm/mach-exynos/cpu.c
index 90ec247f3b3..cc8d4bd6d0f 100644
--- a/arch/arm/mach-exynos/cpu.c
+++ b/arch/arm/mach-exynos/cpu.c
@@ -110,11 +110,6 @@ static struct map_desc exynos4_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_DMC0),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_SROMC,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_SROMC),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_HSPHY),
-- 
cgit v1.2.3


From cc511b8d84d88ab788cddbfe8d21485b1c387493 Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Tue, 27 Dec 2011 08:18:36 +0100
Subject: ARM: 7257/1: EXYNOS: introduce arch/arm/mach-exynos/common.[ch]

This patch introduces common.[ch] which are used only in the
arch/arm/mach-exynos/ directory. The common.c file merges
the cpu.c, init.c, irq-combiner.c and irq-eint.c files which
are used commonly on EXYNOS SoCs and the common.h file replaces
with plat/exynos4.h file.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-exynos/Makefile              |   9 +-
 arch/arm/mach-exynos/clock-exynos4210.c    |   3 +-
 arch/arm/mach-exynos/clock-exynos4212.c    |   3 +-
 arch/arm/mach-exynos/clock.c               |   3 +-
 arch/arm/mach-exynos/common.c              | 723 +++++++++++++++++++++++++++++
 arch/arm/mach-exynos/common.h              |  39 ++
 arch/arm/mach-exynos/cpu.c                 | 298 ------------
 arch/arm/mach-exynos/include/mach/map.h    |  12 +-
 arch/arm/mach-exynos/init.c                |  42 --
 arch/arm/mach-exynos/irq-combiner.c        | 124 -----
 arch/arm/mach-exynos/irq-eint.c            | 237 ----------
 arch/arm/mach-exynos/mach-armlex4210.c     |   5 +-
 arch/arm/mach-exynos/mach-nuri.c           |   5 +-
 arch/arm/mach-exynos/mach-origen.c         |   5 +-
 arch/arm/mach-exynos/mach-smdk4x12.c       |   5 +-
 arch/arm/mach-exynos/mach-smdkv310.c       |   5 +-
 arch/arm/mach-exynos/mach-universal_c210.c |   5 +-
 17 files changed, 793 insertions(+), 730 deletions(-)
 create mode 100644 arch/arm/mach-exynos/common.c
 create mode 100644 arch/arm/mach-exynos/common.h
 delete mode 100644 arch/arm/mach-exynos/cpu.c
 delete mode 100644 arch/arm/mach-exynos/init.c
 delete mode 100644 arch/arm/mach-exynos/irq-combiner.c
 delete mode 100644 arch/arm/mach-exynos/irq-eint.c

(limited to 'arch/arm/mach-exynos')

diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 59069a35e40..bcb9efc576e 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -10,15 +10,17 @@ obj-m				:=
 obj-n				:=
 obj-				:=
 
-# Core support for EXYNOS4 system
+# Core
 
-obj-$(CONFIG_ARCH_EXYNOS4)	+= cpu.o init.o clock.o irq-combiner.o setup-i2c0.o
-obj-$(CONFIG_ARCH_EXYNOS4)	+= irq-eint.o dma.o pmu.o
+obj-$(CONFIG_ARCH_EXYNOS4)	+= common.o clock.o
 obj-$(CONFIG_CPU_EXYNOS4210)	+= clock-exynos4210.o
 obj-$(CONFIG_SOC_EXYNOS4212)	+= clock-exynos4212.o
+
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
+obj-$(CONFIG_ARCH_EXYNOS4)	+= dma.o pmu.o
+
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 
 obj-$(CONFIG_EXYNOS4_MCT)	+= mct.o
@@ -45,6 +47,7 @@ obj-$(CONFIG_EXYNOS4_DEV_PD)		+= dev-pd.o
 obj-$(CONFIG_EXYNOS4_DEV_SYSMMU)	+= dev-sysmmu.o
 obj-$(CONFIG_EXYNOS4_DEV_DWMCI)		+= dev-dwmci.o
 
+obj-$(CONFIG_ARCH_EXYNOS4)		+= setup-i2c0.o
 obj-$(CONFIG_EXYNOS4_SETUP_FIMC)	+= setup-fimc.o
 obj-$(CONFIG_EXYNOS4_SETUP_FIMD0)	+= setup-fimd0.o
 obj-$(CONFIG_EXYNOS4_SETUP_I2C1)	+= setup-i2c1.o
diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c
index b9d5ef670eb..a5823a7f249 100644
--- a/arch/arm/mach-exynos/clock-exynos4210.c
+++ b/arch/arm/mach-exynos/clock-exynos4210.c
@@ -23,7 +23,6 @@
 #include <plat/pll.h>
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
-#include <plat/exynos4.h>
 #include <plat/pm.h>
 
 #include <mach/hardware.h>
@@ -31,6 +30,8 @@
 #include <mach/regs-clock.h>
 #include <mach/exynos4-clock.h>
 
+#include "common.h"
+
 static struct sleep_save exynos4210_clock_save[] = {
 	SAVE_ITEM(S5P_CLKSRC_IMAGE),
 	SAVE_ITEM(S5P_CLKSRC_LCD1),
diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c
index 77d5decb34f..26a668b0d10 100644
--- a/arch/arm/mach-exynos/clock-exynos4212.c
+++ b/arch/arm/mach-exynos/clock-exynos4212.c
@@ -23,7 +23,6 @@
 #include <plat/pll.h>
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
-#include <plat/exynos4.h>
 #include <plat/pm.h>
 
 #include <mach/hardware.h>
@@ -31,6 +30,8 @@
 #include <mach/regs-clock.h>
 #include <mach/exynos4-clock.h>
 
+#include "common.h"
+
 static struct sleep_save exynos4212_clock_save[] = {
 	SAVE_ITEM(S5P_CLKSRC_IMAGE),
 	SAVE_ITEM(S5P_CLKDIV_IMAGE),
diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c
index 2894f0adef5..83616a039b1 100644
--- a/arch/arm/mach-exynos/clock.c
+++ b/arch/arm/mach-exynos/clock.c
@@ -21,7 +21,6 @@
 #include <plat/pll.h>
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
-#include <plat/exynos4.h>
 #include <plat/pm.h>
 
 #include <mach/map.h>
@@ -29,6 +28,8 @@
 #include <mach/sysmmu.h>
 #include <mach/exynos4-clock.h>
 
+#include "common.h"
+
 static struct sleep_save exynos4_clock_save[] = {
 	SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
 	SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
new file mode 100644
index 00000000000..eecac125307
--- /dev/null
+++ b/arch/arm/mach-exynos/common.c
@@ -0,0 +1,723 @@
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Common Codes for EXYNOS
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/gpio.h>
+#include <linux/sched.h>
+#include <linux/serial_core.h>
+
+#include <asm/proc-fns.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-pmu.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/pm.h>
+#include <plat/reset.h>
+#include <plat/sdhci.h>
+#include <plat/gpio-cfg.h>
+#include <plat/adc-core.h>
+#include <plat/fb-core.h>
+#include <plat/fimc-core.h>
+#include <plat/iic-core.h>
+#include <plat/tv-core.h>
+#include <plat/regs-serial.h>
+
+#include "common.h"
+
+unsigned int gic_bank_offset __read_mostly;
+
+static const char name_exynos4210[] = "EXYNOS4210";
+static const char name_exynos4212[] = "EXYNOS4212";
+static const char name_exynos4412[] = "EXYNOS4412";
+
+static struct cpu_table cpu_ids[] __initdata = {
+	{
+		.idcode		= EXYNOS4210_CPU_ID,
+		.idmask		= EXYNOS4_CPU_MASK,
+		.map_io		= exynos4_map_io,
+		.init_clocks	= exynos4_init_clocks,
+		.init_uarts	= exynos4_init_uarts,
+		.init		= exynos_init,
+		.name		= name_exynos4210,
+	}, {
+		.idcode		= EXYNOS4212_CPU_ID,
+		.idmask		= EXYNOS4_CPU_MASK,
+		.map_io		= exynos4_map_io,
+		.init_clocks	= exynos4_init_clocks,
+		.init_uarts	= exynos4_init_uarts,
+		.init		= exynos_init,
+		.name		= name_exynos4212,
+	}, {
+		.idcode		= EXYNOS4412_CPU_ID,
+		.idmask		= EXYNOS4_CPU_MASK,
+		.map_io		= exynos4_map_io,
+		.init_clocks	= exynos4_init_clocks,
+		.init_uarts	= exynos4_init_uarts,
+		.init		= exynos_init,
+		.name		= name_exynos4412,
+	},
+};
+
+/* Initial IO mappings */
+
+static struct map_desc exynos_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_CHIPID,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_CHIPID),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_SYS,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSCON),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_TIMER,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_TIMER),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_WATCHDOG),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_SROMC,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_SROMC),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSTIMER),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_PMU,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_PMU),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_COMBINER_BASE,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_COMBINER),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GIC_CPU,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_GIC_CPU),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GIC_DIST,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_GIC_DIST),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_UART),
+		.length		= SZ_512K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc exynos4_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_CMU,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_CMU),
+		.length		= SZ_128K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_COREPERI_BASE,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_COREPERI),
+		.length		= SZ_8K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_L2CC,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_L2CC),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GPIO1,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_GPIO1),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GPIO2,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_GPIO2),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GPIO3,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_GPIO3),
+		.length		= SZ_256,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_DMC0,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_DMC0),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_SROMC,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_SROMC),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_HSPHY),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc exynos4_iodesc0[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSRAM,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc exynos4_iodesc1[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSRAM,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void exynos_idle(void)
+{
+	if (!need_resched())
+		cpu_do_idle();
+
+	local_irq_enable();
+}
+
+static void exynos4_sw_reset(void)
+{
+	__raw_writel(0x1, S5P_SWRESET);
+}
+
+/*
+ * exynos_map_io
+ *
+ * register the standard cpu IO areas
+ */
+
+void __init exynos_init_io(struct map_desc *mach_desc, int size)
+{
+	/* initialize the io descriptors we need for initialization */
+	iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc));
+	if (mach_desc)
+		iotable_init(mach_desc, size);
+
+	/* detect cpu id and rev. */
+	s5p_init_cpu(S5P_VA_CHIPID);
+
+	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
+void __init exynos4_map_io(void)
+{
+	iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
+
+	if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
+		iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0));
+	else
+		iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
+
+	/* initialize device information early */
+	exynos4_default_sdhci0();
+	exynos4_default_sdhci1();
+	exynos4_default_sdhci2();
+	exynos4_default_sdhci3();
+
+	s3c_adc_setname("samsung-adc-v3");
+
+	s3c_fimc_setname(0, "exynos4-fimc");
+	s3c_fimc_setname(1, "exynos4-fimc");
+	s3c_fimc_setname(2, "exynos4-fimc");
+	s3c_fimc_setname(3, "exynos4-fimc");
+
+	/* The I2C bus controllers are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+	s3c_i2c1_setname("s3c2440-i2c");
+	s3c_i2c2_setname("s3c2440-i2c");
+
+	s5p_fb_setname(0, "exynos4-fb");
+	s5p_hdmi_setname("exynos4-hdmi");
+}
+
+void __init exynos4_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+	s3c24xx_register_baseclocks(xtal);
+	s5p_register_clocks(xtal);
+
+	if (soc_is_exynos4210())
+		exynos4210_register_clocks();
+	else if (soc_is_exynos4212() || soc_is_exynos4412())
+		exynos4212_register_clocks();
+
+	exynos4_register_clocks();
+	exynos4_setup_clocks();
+}
+
+#define COMBINER_ENABLE_SET	0x0
+#define COMBINER_ENABLE_CLEAR	0x4
+#define COMBINER_INT_STATUS	0xC
+
+static DEFINE_SPINLOCK(irq_controller_lock);
+
+struct combiner_chip_data {
+	unsigned int irq_offset;
+	unsigned int irq_mask;
+	void __iomem *base;
+};
+
+static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
+
+static inline void __iomem *combiner_base(struct irq_data *data)
+{
+	struct combiner_chip_data *combiner_data =
+		irq_data_get_irq_chip_data(data);
+
+	return combiner_data->base;
+}
+
+static void combiner_mask_irq(struct irq_data *data)
+{
+	u32 mask = 1 << (data->irq % 32);
+
+	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
+}
+
+static void combiner_unmask_irq(struct irq_data *data)
+{
+	u32 mask = 1 << (data->irq % 32);
+
+	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
+}
+
+static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
+{
+	struct combiner_chip_data *chip_data = irq_get_handler_data(irq);
+	struct irq_chip *chip = irq_get_chip(irq);
+	unsigned int cascade_irq, combiner_irq;
+	unsigned long status;
+
+	chained_irq_enter(chip, desc);
+
+	spin_lock(&irq_controller_lock);
+	status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
+	spin_unlock(&irq_controller_lock);
+	status &= chip_data->irq_mask;
+
+	if (status == 0)
+		goto out;
+
+	combiner_irq = __ffs(status);
+
+	cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
+	if (unlikely(cascade_irq >= NR_IRQS))
+		do_bad_IRQ(cascade_irq, desc);
+	else
+		generic_handle_irq(cascade_irq);
+
+ out:
+	chained_irq_exit(chip, desc);
+}
+
+static struct irq_chip combiner_chip = {
+	.name		= "COMBINER",
+	.irq_mask	= combiner_mask_irq,
+	.irq_unmask	= combiner_unmask_irq,
+};
+
+static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
+{
+	if (combiner_nr >= MAX_COMBINER_NR)
+		BUG();
+	if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
+		BUG();
+	irq_set_chained_handler(irq, combiner_handle_cascade_irq);
+}
+
+static void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
+			  unsigned int irq_start)
+{
+	unsigned int i;
+
+	if (combiner_nr >= MAX_COMBINER_NR)
+		BUG();
+
+	combiner_data[combiner_nr].base = base;
+	combiner_data[combiner_nr].irq_offset = irq_start;
+	combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
+
+	/* Disable all interrupts */
+
+	__raw_writel(combiner_data[combiner_nr].irq_mask,
+		     base + COMBINER_ENABLE_CLEAR);
+
+	/* Setup the Linux IRQ subsystem */
+
+	for (i = irq_start; i < combiner_data[combiner_nr].irq_offset
+				+ MAX_IRQ_IN_COMBINER; i++) {
+		irq_set_chip_and_handler(i, &combiner_chip, handle_level_irq);
+		irq_set_chip_data(i, &combiner_data[combiner_nr]);
+		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+	}
+}
+
+static void exynos4_gic_irq_fix_base(struct irq_data *d)
+{
+	struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
+
+	gic_data->cpu_base = S5P_VA_GIC_CPU +
+			    (gic_bank_offset * smp_processor_id());
+
+	gic_data->dist_base = S5P_VA_GIC_DIST +
+			    (gic_bank_offset * smp_processor_id());
+}
+
+void __init exynos4_init_irq(void)
+{
+	int irq;
+
+	gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
+
+	gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+	gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
+	gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
+	gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
+
+	for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
+
+		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
+				COMBINER_IRQ(irq, 0));
+		combiner_cascade_irq(irq, IRQ_SPI(irq));
+	}
+
+	/*
+	 * The parameters of s5p_init_irq() are for VIC init.
+	 * Theses parameters should be NULL and 0 because EXYNOS4
+	 * uses GIC instead of VIC.
+	 */
+	s5p_init_irq(NULL, 0);
+}
+
+struct sysdev_class exynos4_sysclass = {
+	.name	= "exynos4-core",
+};
+
+static struct sys_device exynos4_sysdev = {
+	.cls	= &exynos4_sysclass,
+};
+
+static int __init exynos4_core_init(void)
+{
+	return sysdev_class_register(&exynos4_sysclass);
+}
+core_initcall(exynos4_core_init);
+
+#ifdef CONFIG_CACHE_L2X0
+static int __init exynos4_l2x0_cache_init(void)
+{
+	/* TAG, Data Latency Control: 2cycle */
+	__raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
+
+	if (soc_is_exynos4210())
+		__raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+	else if (soc_is_exynos4212() || soc_is_exynos4412())
+		__raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+
+	/* L2X0 Prefetch Control */
+	__raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
+
+	/* L2X0 Power Control */
+	__raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN,
+		     S5P_VA_L2CC + L2X0_POWER_CTRL);
+
+	l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff);
+
+	return 0;
+}
+
+early_initcall(exynos4_l2x0_cache_init);
+#endif
+
+int __init exynos_init(void)
+{
+	printk(KERN_INFO "EXYNOS: Initializing architecture\n");
+
+	/* set idle function */
+	pm_idle = exynos_idle;
+
+	/* set sw_reset function */
+	if (soc_is_exynos4210() || soc_is_exynos4212() || soc_is_exynos4412())
+		s5p_reset_hook = exynos4_sw_reset;
+
+	return sysdev_register(&exynos4_sysdev);
+}
+
+static struct s3c24xx_uart_clksrc exynos4_serial_clocks[] = {
+	[0] = {
+		.name		= "uclk1",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+};
+
+/* uart registration process */
+
+void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	struct s3c2410_uartcfg *tcfg = cfg;
+	u32 ucnt;
+
+	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+		if (!tcfg->clocks) {
+			tcfg->has_fracval = 1;
+			tcfg->clocks = exynos4_serial_clocks;
+			tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks);
+		}
+		tcfg->flags |= NO_NEED_CHECK_CLKSRC;
+	}
+
+	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
+}
+
+static DEFINE_SPINLOCK(eint_lock);
+
+static unsigned int eint0_15_data[16];
+
+static unsigned int exynos4_get_irq_nr(unsigned int number)
+{
+	u32 ret = 0;
+
+	switch (number) {
+	case 0 ... 3:
+		ret = (number + IRQ_EINT0);
+		break;
+	case 4 ... 7:
+		ret = (number + (IRQ_EINT4 - 4));
+		break;
+	case 8 ... 15:
+		ret = (number + (IRQ_EINT8 - 8));
+		break;
+	default:
+		printk(KERN_ERR "number available : %d\n", number);
+	}
+
+	return ret;
+}
+
+static inline void exynos4_irq_eint_mask(struct irq_data *data)
+{
+	u32 mask;
+
+	spin_lock(&eint_lock);
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+	mask |= eint_irq_to_bit(data->irq);
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+	spin_unlock(&eint_lock);
+}
+
+static void exynos4_irq_eint_unmask(struct irq_data *data)
+{
+	u32 mask;
+
+	spin_lock(&eint_lock);
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+	mask &= ~(eint_irq_to_bit(data->irq));
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+	spin_unlock(&eint_lock);
+}
+
+static inline void exynos4_irq_eint_ack(struct irq_data *data)
+{
+	__raw_writel(eint_irq_to_bit(data->irq),
+		     S5P_EINT_PEND(EINT_REG_NR(data->irq)));
+}
+
+static void exynos4_irq_eint_maskack(struct irq_data *data)
+{
+	exynos4_irq_eint_mask(data);
+	exynos4_irq_eint_ack(data);
+}
+
+static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type)
+{
+	int offs = EINT_OFFSET(data->irq);
+	int shift;
+	u32 ctrl, mask;
+	u32 newvalue = 0;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		newvalue = S5P_IRQ_TYPE_EDGE_RISING;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
+		break;
+
+	default:
+		printk(KERN_ERR "No such irq type %d", type);
+		return -EINVAL;
+	}
+
+	shift = (offs & 0x7) * 4;
+	mask = 0x7 << shift;
+
+	spin_lock(&eint_lock);
+	ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
+	ctrl &= ~mask;
+	ctrl |= newvalue << shift;
+	__raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
+	spin_unlock(&eint_lock);
+
+	switch (offs) {
+	case 0 ... 7:
+		s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
+		break;
+	case 8 ... 15:
+		s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
+		break;
+	case 16 ... 23:
+		s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
+		break;
+	case 24 ... 31:
+		s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
+		break;
+	default:
+		printk(KERN_ERR "No such irq number %d", offs);
+	}
+
+	return 0;
+}
+
+static struct irq_chip exynos4_irq_eint = {
+	.name		= "exynos4-eint",
+	.irq_mask	= exynos4_irq_eint_mask,
+	.irq_unmask	= exynos4_irq_eint_unmask,
+	.irq_mask_ack	= exynos4_irq_eint_maskack,
+	.irq_ack	= exynos4_irq_eint_ack,
+	.irq_set_type	= exynos4_irq_eint_set_type,
+#ifdef CONFIG_PM
+	.irq_set_wake	= s3c_irqext_wake,
+#endif
+};
+
+/*
+ * exynos4_irq_demux_eint
+ *
+ * This function demuxes the IRQ from from EINTs 16 to 31.
+ * It is designed to be inlined into the specific handler
+ * s5p_irq_demux_eintX_Y.
+ *
+ * Each EINT pend/mask registers handle eight of them.
+ */
+static inline void exynos4_irq_demux_eint(unsigned int start)
+{
+	unsigned int irq;
+
+	u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
+	u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
+
+	status &= ~mask;
+	status &= 0xff;
+
+	while (status) {
+		irq = fls(status) - 1;
+		generic_handle_irq(irq + start);
+		status &= ~(1 << irq);
+	}
+}
+
+static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_get_chip(irq);
+	chained_irq_enter(chip, desc);
+	exynos4_irq_demux_eint(IRQ_EINT(16));
+	exynos4_irq_demux_eint(IRQ_EINT(24));
+	chained_irq_exit(chip, desc);
+}
+
+static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
+{
+	u32 *irq_data = irq_get_handler_data(irq);
+	struct irq_chip *chip = irq_get_chip(irq);
+
+	chained_irq_enter(chip, desc);
+	chip->irq_mask(&desc->irq_data);
+
+	if (chip->irq_ack)
+		chip->irq_ack(&desc->irq_data);
+
+	generic_handle_irq(*irq_data);
+
+	chip->irq_unmask(&desc->irq_data);
+	chained_irq_exit(chip, desc);
+}
+
+int __init exynos4_init_irq_eint(void)
+{
+	int irq;
+
+	for (irq = 0 ; irq <= 31 ; irq++) {
+		irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint,
+					 handle_level_irq);
+		set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
+	}
+
+	irq_set_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
+
+	for (irq = 0 ; irq <= 15 ; irq++) {
+		eint0_15_data[irq] = IRQ_EINT(irq);
+
+		irq_set_handler_data(exynos4_get_irq_nr(irq),
+				     &eint0_15_data[irq]);
+		irq_set_chained_handler(exynos4_get_irq_nr(irq),
+					exynos4_irq_eint0_15);
+	}
+
+	return 0;
+}
+arch_initcall(exynos4_init_irq_eint);
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
new file mode 100644
index 00000000000..0476c5f0887
--- /dev/null
+++ b/arch/arm/mach-exynos/common.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Common Header for EXYNOS machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
+#define __ARCH_ARM_MACH_EXYNOS_COMMON_H
+
+void exynos_init_io(struct map_desc *mach_desc, int size);
+void exynos4_init_irq(void);
+
+void exynos4_register_clocks(void);
+void exynos4_setup_clocks(void);
+
+void exynos4210_register_clocks(void);
+void exynos4212_register_clocks(void);
+
+extern struct sys_timer exynos4_timer;
+
+#ifdef CONFIG_ARCH_EXYNOS
+extern  int exynos_init(void);
+extern void exynos4_map_io(void);
+extern void exynos4_init_clocks(int xtal);
+extern void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define exynos4_init_clocks NULL
+#define exynos4_init_uarts NULL
+#define exynos4_map_io NULL
+#define exynos_init NULL
+#endif
+
+#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
diff --git a/arch/arm/mach-exynos/cpu.c b/arch/arm/mach-exynos/cpu.c
deleted file mode 100644
index 90ec247f3b3..00000000000
--- a/arch/arm/mach-exynos/cpu.c
+++ /dev/null
@@ -1,298 +0,0 @@
-/* linux/arch/arm/mach-exynos/cpu.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/sched.h>
-#include <linux/sysdev.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/proc-fns.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/exynos4.h>
-#include <plat/adc-core.h>
-#include <plat/sdhci.h>
-#include <plat/fb-core.h>
-#include <plat/fimc-core.h>
-#include <plat/iic-core.h>
-#include <plat/reset.h>
-#include <plat/tv-core.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-pmu.h>
-
-unsigned int gic_bank_offset __read_mostly;
-
-extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
-			 unsigned int irq_start);
-extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
-
-/* Initial IO mappings */
-static struct map_desc exynos_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
-		.pfn		= __phys_to_pfn(EXYNOS_PA_SYSTIMER),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_PMU,
-		.pfn		= __phys_to_pfn(EXYNOS_PA_PMU),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_COMBINER_BASE,
-		.pfn		= __phys_to_pfn(EXYNOS_PA_COMBINER),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GIC_CPU,
-		.pfn		= __phys_to_pfn(EXYNOS_PA_GIC_CPU),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GIC_DIST,
-		.pfn		= __phys_to_pfn(EXYNOS_PA_GIC_DIST),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(S3C_PA_UART),
-		.length		= SZ_512K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc exynos4_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_CMU,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_CMU),
-		.length		= SZ_128K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_COREPERI_BASE,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_COREPERI),
-		.length		= SZ_8K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_L2CC,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_L2CC),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GPIO1,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_GPIO1),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GPIO2,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_GPIO2),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GPIO3,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_GPIO3),
-		.length		= SZ_256,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_DMC0,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_DMC0),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_SROMC,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_SROMC),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_HSPHY),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc exynos4_iodesc0[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_SYSRAM,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc exynos4_iodesc1[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_SYSRAM,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static void exynos_idle(void)
-{
-	if (!need_resched())
-		cpu_do_idle();
-
-	local_irq_enable();
-}
-
-static void exynos4_sw_reset(void)
-{
-	__raw_writel(0x1, S5P_SWRESET);
-}
-
-/*
- * exynos_map_io
- *
- * register the standard cpu IO areas
- */
-void __init exynos4_map_io(void)
-{
-	iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc));
-	iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
-
-	if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
-		iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0));
-	else
-		iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
-
-	/* initialize device information early */
-	exynos4_default_sdhci0();
-	exynos4_default_sdhci1();
-	exynos4_default_sdhci2();
-	exynos4_default_sdhci3();
-
-	s3c_adc_setname("samsung-adc-v3");
-
-	s3c_fimc_setname(0, "exynos4-fimc");
-	s3c_fimc_setname(1, "exynos4-fimc");
-	s3c_fimc_setname(2, "exynos4-fimc");
-	s3c_fimc_setname(3, "exynos4-fimc");
-
-	/* The I2C bus controllers are directly compatible with s3c2440 */
-	s3c_i2c0_setname("s3c2440-i2c");
-	s3c_i2c1_setname("s3c2440-i2c");
-	s3c_i2c2_setname("s3c2440-i2c");
-
-	s5p_fb_setname(0, "exynos4-fb");
-	s5p_hdmi_setname("exynos4-hdmi");
-}
-
-void __init exynos4_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
-	s3c24xx_register_baseclocks(xtal);
-	s5p_register_clocks(xtal);
-
-	if (soc_is_exynos4210())
-		exynos4210_register_clocks();
-	else if (soc_is_exynos4212() || soc_is_exynos4412())
-		exynos4212_register_clocks();
-
-	exynos4_register_clocks();
-	exynos4_setup_clocks();
-}
-
-static void exynos4_gic_irq_fix_base(struct irq_data *d)
-{
-	struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
-
-	gic_data->cpu_base = S5P_VA_GIC_CPU +
-			    (gic_bank_offset * smp_processor_id());
-
-	gic_data->dist_base = S5P_VA_GIC_DIST +
-			    (gic_bank_offset * smp_processor_id());
-}
-
-void __init exynos4_init_irq(void)
-{
-	int irq;
-
-	gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
-
-	gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
-	gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
-	gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
-	gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
-
-	for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
-
-		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
-				COMBINER_IRQ(irq, 0));
-		combiner_cascade_irq(irq, IRQ_SPI(irq));
-	}
-
-	/* The parameters of s5p_init_irq() are for VIC init.
-	 * Theses parameters should be NULL and 0 because EXYNOS4
-	 * uses GIC instead of VIC.
-	 */
-	s5p_init_irq(NULL, 0);
-}
-
-struct sysdev_class exynos4_sysclass = {
-	.name	= "exynos4-core",
-};
-
-static struct sys_device exynos4_sysdev = {
-	.cls	= &exynos4_sysclass,
-};
-
-static int __init exynos4_core_init(void)
-{
-	return sysdev_class_register(&exynos4_sysclass);
-}
-core_initcall(exynos4_core_init);
-
-#ifdef CONFIG_CACHE_L2X0
-static int __init exynos4_l2x0_cache_init(void)
-{
-	/* TAG, Data Latency Control: 2cycle */
-	__raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
-
-	if (soc_is_exynos4210())
-		__raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
-	else if (soc_is_exynos4212() || soc_is_exynos4412())
-		__raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
-
-	/* L2X0 Prefetch Control */
-	__raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
-
-	/* L2X0 Power Control */
-	__raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN,
-		     S5P_VA_L2CC + L2X0_POWER_CTRL);
-
-	l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff);
-
-	return 0;
-}
-
-early_initcall(exynos4_l2x0_cache_init);
-#endif
-
-int __init exynos_init(void)
-{
-	printk(KERN_INFO "EXYNOS: Initializing architecture\n");
-
-	/* set idle function */
-	pm_idle = exynos_idle;
-
-	/* set sw_reset function */
-	if (soc_is_exynos4210() || soc_is_exynos4212() || soc_is_exynos4412())
-		s5p_reset_hook = exynos4_sw_reset;
-
-	return sysdev_register(&exynos4_sysdev);
-}
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 058541d45af..d1829860a0e 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -149,7 +149,6 @@
 #define S3C_PA_WDT			EXYNOS4_PA_WATCHDOG
 #define S3C_PA_UART			EXYNOS4_PA_UART
 
-#define S5P_PA_CHIPID			EXYNOS4_PA_CHIPID
 #define S5P_PA_EHCI			EXYNOS4_PA_EHCI
 #define S5P_PA_FIMC0			EXYNOS4_PA_FIMC0
 #define S5P_PA_FIMC1			EXYNOS4_PA_FIMC1
@@ -166,26 +165,17 @@
 #define S5P_PA_ONENAND_DMA		EXYNOS4_PA_ONENAND_DMA
 #define S5P_PA_SDO			EXYNOS4_PA_SDO
 #define S5P_PA_SDRAM			EXYNOS4_PA_SDRAM
-#define S5P_PA_SROMC			EXYNOS4_PA_SROMC
-#define S5P_PA_SYSCON			EXYNOS4_PA_SYSCON
-#define S5P_PA_TIMER			EXYNOS4_PA_TIMER
 #define S5P_PA_VP			EXYNOS4_PA_VP
 
 #define SAMSUNG_PA_ADC			EXYNOS4_PA_ADC
 #define SAMSUNG_PA_ADC1			EXYNOS4_PA_ADC1
 #define SAMSUNG_PA_KEYPAD		EXYNOS4_PA_KEYPAD
 
-#define EXYNOS_PA_COMBINER		EXYNOS4_PA_COMBINER
-#define EXYNOS_PA_GIC_CPU		EXYNOS4_PA_GIC_CPU
-#define EXYNOS_PA_GIC_DIST		EXYNOS4_PA_GIC_DIST
-#define EXYNOS_PA_PMU			EXYNOS4_PA_PMU
-#define EXYNOS_PA_SYSTIMER		EXYNOS4_PA_SYSTIMER
-
 /* Compatibility UART */
 
 #define S3C_VA_UARTx(x)			(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
 
-#define S5P_PA_UART(x)			(S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART(x)			(EXYNOS4_PA_UART + ((x) * S3C_UART_OFFSET))
 #define S5P_PA_UART0			S5P_PA_UART(0)
 #define S5P_PA_UART1			S5P_PA_UART(1)
 #define S5P_PA_UART2			S5P_PA_UART(2)
diff --git a/arch/arm/mach-exynos/init.c b/arch/arm/mach-exynos/init.c
deleted file mode 100644
index a8a83e3881a..00000000000
--- a/arch/arm/mach-exynos/init.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/* linux/arch/arm/mach-exynos4/init.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/regs-serial.h>
-
-static struct s3c24xx_uart_clksrc exynos4_serial_clocks[] = {
-	[0] = {
-		.name		= "uclk1",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	},
-};
-
-/* uart registration process */
-void __init exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	struct s3c2410_uartcfg *tcfg = cfg;
-	u32 ucnt;
-
-	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
-		if (!tcfg->clocks) {
-			tcfg->has_fracval = 1;
-			tcfg->clocks = exynos4_serial_clocks;
-			tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks);
-		}
-		tcfg->flags |= NO_NEED_CHECK_CLKSRC;
-	}
-
-	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
-}
diff --git a/arch/arm/mach-exynos/irq-combiner.c b/arch/arm/mach-exynos/irq-combiner.c
deleted file mode 100644
index 5a2758ab055..00000000000
--- a/arch/arm/mach-exynos/irq-combiner.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/* linux/arch/arm/mach-exynos4/irq-combiner.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Based on arch/arm/common/gic.c
- *
- * IRQ COMBINER support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-
-#include <asm/mach/irq.h>
-
-#define COMBINER_ENABLE_SET	0x0
-#define COMBINER_ENABLE_CLEAR	0x4
-#define COMBINER_INT_STATUS	0xC
-
-static DEFINE_SPINLOCK(irq_controller_lock);
-
-struct combiner_chip_data {
-	unsigned int irq_offset;
-	unsigned int irq_mask;
-	void __iomem *base;
-};
-
-static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
-
-static inline void __iomem *combiner_base(struct irq_data *data)
-{
-	struct combiner_chip_data *combiner_data =
-		irq_data_get_irq_chip_data(data);
-
-	return combiner_data->base;
-}
-
-static void combiner_mask_irq(struct irq_data *data)
-{
-	u32 mask = 1 << (data->irq % 32);
-
-	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
-}
-
-static void combiner_unmask_irq(struct irq_data *data)
-{
-	u32 mask = 1 << (data->irq % 32);
-
-	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
-}
-
-static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
-{
-	struct combiner_chip_data *chip_data = irq_get_handler_data(irq);
-	struct irq_chip *chip = irq_get_chip(irq);
-	unsigned int cascade_irq, combiner_irq;
-	unsigned long status;
-
-	chained_irq_enter(chip, desc);
-
-	spin_lock(&irq_controller_lock);
-	status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
-	spin_unlock(&irq_controller_lock);
-	status &= chip_data->irq_mask;
-
-	if (status == 0)
-		goto out;
-
-	combiner_irq = __ffs(status);
-
-	cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
-	if (unlikely(cascade_irq >= NR_IRQS))
-		do_bad_IRQ(cascade_irq, desc);
-	else
-		generic_handle_irq(cascade_irq);
-
- out:
-	chained_irq_exit(chip, desc);
-}
-
-static struct irq_chip combiner_chip = {
-	.name		= "COMBINER",
-	.irq_mask	= combiner_mask_irq,
-	.irq_unmask	= combiner_unmask_irq,
-};
-
-void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
-{
-	if (combiner_nr >= MAX_COMBINER_NR)
-		BUG();
-	if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
-		BUG();
-	irq_set_chained_handler(irq, combiner_handle_cascade_irq);
-}
-
-void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
-			  unsigned int irq_start)
-{
-	unsigned int i;
-
-	if (combiner_nr >= MAX_COMBINER_NR)
-		BUG();
-
-	combiner_data[combiner_nr].base = base;
-	combiner_data[combiner_nr].irq_offset = irq_start;
-	combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
-
-	/* Disable all interrupts */
-
-	__raw_writel(combiner_data[combiner_nr].irq_mask,
-		     base + COMBINER_ENABLE_CLEAR);
-
-	/* Setup the Linux IRQ subsystem */
-
-	for (i = irq_start; i < combiner_data[combiner_nr].irq_offset
-				+ MAX_IRQ_IN_COMBINER; i++) {
-		irq_set_chip_and_handler(i, &combiner_chip, handle_level_irq);
-		irq_set_chip_data(i, &combiner_data[combiner_nr]);
-		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-	}
-}
diff --git a/arch/arm/mach-exynos/irq-eint.c b/arch/arm/mach-exynos/irq-eint.c
deleted file mode 100644
index badb8c66fc9..00000000000
--- a/arch/arm/mach-exynos/irq-eint.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/* linux/arch/arm/mach-exynos4/irq-eint.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - IRQ EINT support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/gpio.h>
-
-#include <plat/pm.h>
-#include <plat/cpu.h>
-#include <plat/gpio-cfg.h>
-
-#include <mach/regs-gpio.h>
-
-#include <asm/mach/irq.h>
-
-static DEFINE_SPINLOCK(eint_lock);
-
-static unsigned int eint0_15_data[16];
-
-static unsigned int exynos4_get_irq_nr(unsigned int number)
-{
-	u32 ret = 0;
-
-	switch (number) {
-	case 0 ... 3:
-		ret = (number + IRQ_EINT0);
-		break;
-	case 4 ... 7:
-		ret = (number + (IRQ_EINT4 - 4));
-		break;
-	case 8 ... 15:
-		ret = (number + (IRQ_EINT8 - 8));
-		break;
-	default:
-		printk(KERN_ERR "number available : %d\n", number);
-	}
-
-	return ret;
-}
-
-static inline void exynos4_irq_eint_mask(struct irq_data *data)
-{
-	u32 mask;
-
-	spin_lock(&eint_lock);
-	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-	mask |= eint_irq_to_bit(data->irq);
-	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-	spin_unlock(&eint_lock);
-}
-
-static void exynos4_irq_eint_unmask(struct irq_data *data)
-{
-	u32 mask;
-
-	spin_lock(&eint_lock);
-	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-	mask &= ~(eint_irq_to_bit(data->irq));
-	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-	spin_unlock(&eint_lock);
-}
-
-static inline void exynos4_irq_eint_ack(struct irq_data *data)
-{
-	__raw_writel(eint_irq_to_bit(data->irq),
-		     S5P_EINT_PEND(EINT_REG_NR(data->irq)));
-}
-
-static void exynos4_irq_eint_maskack(struct irq_data *data)
-{
-	exynos4_irq_eint_mask(data);
-	exynos4_irq_eint_ack(data);
-}
-
-static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type)
-{
-	int offs = EINT_OFFSET(data->irq);
-	int shift;
-	u32 ctrl, mask;
-	u32 newvalue = 0;
-
-	switch (type) {
-	case IRQ_TYPE_EDGE_RISING:
-		newvalue = S5P_IRQ_TYPE_EDGE_RISING;
-		break;
-
-	case IRQ_TYPE_EDGE_FALLING:
-		newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
-		break;
-
-	case IRQ_TYPE_EDGE_BOTH:
-		newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
-		break;
-
-	case IRQ_TYPE_LEVEL_LOW:
-		newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
-		break;
-
-	case IRQ_TYPE_LEVEL_HIGH:
-		newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
-		break;
-
-	default:
-		printk(KERN_ERR "No such irq type %d", type);
-		return -EINVAL;
-	}
-
-	shift = (offs & 0x7) * 4;
-	mask = 0x7 << shift;
-
-	spin_lock(&eint_lock);
-	ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
-	ctrl &= ~mask;
-	ctrl |= newvalue << shift;
-	__raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
-	spin_unlock(&eint_lock);
-
-	switch (offs) {
-	case 0 ... 7:
-		s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
-		break;
-	case 8 ... 15:
-		s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
-		break;
-	case 16 ... 23:
-		s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
-		break;
-	case 24 ... 31:
-		s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
-		break;
-	default:
-		printk(KERN_ERR "No such irq number %d", offs);
-	}
-
-	return 0;
-}
-
-static struct irq_chip exynos4_irq_eint = {
-	.name		= "exynos4-eint",
-	.irq_mask	= exynos4_irq_eint_mask,
-	.irq_unmask	= exynos4_irq_eint_unmask,
-	.irq_mask_ack	= exynos4_irq_eint_maskack,
-	.irq_ack	= exynos4_irq_eint_ack,
-	.irq_set_type	= exynos4_irq_eint_set_type,
-#ifdef CONFIG_PM
-	.irq_set_wake	= s3c_irqext_wake,
-#endif
-};
-
-/* exynos4_irq_demux_eint
- *
- * This function demuxes the IRQ from from EINTs 16 to 31.
- * It is designed to be inlined into the specific handler
- * s5p_irq_demux_eintX_Y.
- *
- * Each EINT pend/mask registers handle eight of them.
- */
-static inline void exynos4_irq_demux_eint(unsigned int start)
-{
-	unsigned int irq;
-
-	u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
-	u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
-
-	status &= ~mask;
-	status &= 0xff;
-
-	while (status) {
-		irq = fls(status) - 1;
-		generic_handle_irq(irq + start);
-		status &= ~(1 << irq);
-	}
-}
-
-static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_get_chip(irq);
-	chained_irq_enter(chip, desc);
-	exynos4_irq_demux_eint(IRQ_EINT(16));
-	exynos4_irq_demux_eint(IRQ_EINT(24));
-	chained_irq_exit(chip, desc);
-}
-
-static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
-{
-	u32 *irq_data = irq_get_handler_data(irq);
-	struct irq_chip *chip = irq_get_chip(irq);
-
-	chained_irq_enter(chip, desc);
-	chip->irq_mask(&desc->irq_data);
-
-	if (chip->irq_ack)
-		chip->irq_ack(&desc->irq_data);
-
-	generic_handle_irq(*irq_data);
-
-	chip->irq_unmask(&desc->irq_data);
-	chained_irq_exit(chip, desc);
-}
-
-int __init exynos4_init_irq_eint(void)
-{
-	int irq;
-
-	for (irq = 0 ; irq <= 31 ; irq++) {
-		irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint,
-					 handle_level_irq);
-		set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
-	}
-
-	irq_set_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
-
-	for (irq = 0 ; irq <= 15 ; irq++) {
-		eint0_15_data[irq] = IRQ_EINT(irq);
-
-		irq_set_handler_data(exynos4_get_irq_nr(irq),
-				     &eint0_15_data[irq]);
-		irq_set_chained_handler(exynos4_get_irq_nr(irq),
-					exynos4_irq_eint0_15);
-	}
-
-	return 0;
-}
-
-arch_initcall(exynos4_init_irq_eint);
diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c
index f0ca6c157d2..eeba808625a 100644
--- a/arch/arm/mach-exynos/mach-armlex4210.c
+++ b/arch/arm/mach-exynos/mach-armlex4210.c
@@ -20,7 +20,6 @@
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/exynos4.h>
 #include <plat/gpio-cfg.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-srom.h>
@@ -28,6 +27,8 @@
 
 #include <mach/map.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define ARMLEX4210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -187,7 +188,7 @@ static void __init armlex4210_smsc911x_init(void)
 
 static void __init armlex4210_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(armlex4210_uartcfgs,
 			   ARRAY_SIZE(armlex4210_uartcfgs));
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 236bbe18716..97cd5af1505 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -37,7 +37,6 @@
 #include <plat/adc.h>
 #include <plat/regs-fb-v4.h>
 #include <plat/regs-serial.h>
-#include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/fb.h>
@@ -54,6 +53,8 @@
 
 #include <mach/map.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define NURI_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -1283,7 +1284,7 @@ static struct platform_device *nuri_devices[] __initdata = {
 
 static void __init nuri_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
 }
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index f80b563f2be..cc2c6708276 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -28,7 +28,6 @@
 
 #include <plat/regs-serial.h>
 #include <plat/regs-fb-v4.h>
-#include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/sdhci.h>
@@ -43,6 +42,8 @@
 
 #include <mach/map.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define ORIGEN_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -638,7 +639,7 @@ static void s5p_tv_setup(void)
 
 static void __init origen_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
 }
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index fcf2e0e23d5..2f4cb89aadb 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -27,7 +27,6 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/exynos4.h>
 #include <plat/gpio-cfg.h>
 #include <plat/iic.h>
 #include <plat/keypad.h>
@@ -36,6 +35,8 @@
 
 #include <mach/map.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define SMDK4X12_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -249,7 +250,7 @@ static void __init smdk4x12_map_io(void)
 {
 	clk_xusbxti.rate = 24000000;
 
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
 }
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index cec2afabe7b..cf21d666d12 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -27,7 +27,6 @@
 #include <plat/regs-serial.h>
 #include <plat/regs-srom.h>
 #include <plat/regs-fb-v4.h>
-#include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/fb.h>
@@ -43,6 +42,8 @@
 
 #include <mach/map.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define SMDKV310_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -332,7 +333,7 @@ static void s5p_tv_setup(void)
 
 static void __init smdkv310_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
 }
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index a2a177ff4b4..4826eabf9be 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -27,7 +27,6 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
-#include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/iic.h>
@@ -47,6 +46,8 @@
 #include <media/s5p_fimc.h>
 #include <media/m5mols.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define UNIVERSAL_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -992,7 +993,7 @@ static struct platform_device *universal_devices[] __initdata = {
 
 static void __init universal_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
 }
-- 
cgit v1.2.3


From 9eb4859564d6e104f78abde15e7f0ca996b71236 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Tue, 3 Jan 2012 11:56:53 +0100
Subject: ARM: 7262/1: restart: EXYNOS: use new restart hook

Hook these platforms restart code into the new restart hook rather
than using arch_reset().

[kgene.kim@samsung.com: according to local header, updated]

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-exynos/common.c              | 7 +------
 arch/arm/mach-exynos/common.h              | 2 ++
 arch/arm/mach-exynos/mach-armlex4210.c     | 1 +
 arch/arm/mach-exynos/mach-nuri.c           | 1 +
 arch/arm/mach-exynos/mach-origen.c         | 1 +
 arch/arm/mach-exynos/mach-smdk4x12.c       | 2 ++
 arch/arm/mach-exynos/mach-smdkv310.c       | 2 ++
 arch/arm/mach-exynos/mach-universal_c210.c | 1 +
 8 files changed, 11 insertions(+), 6 deletions(-)

(limited to 'arch/arm/mach-exynos')

diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index eecac125307..6f567a4d851 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -32,7 +32,6 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
-#include <plat/reset.h>
 #include <plat/sdhci.h>
 #include <plat/gpio-cfg.h>
 #include <plat/adc-core.h>
@@ -214,7 +213,7 @@ static void exynos_idle(void)
 	local_irq_enable();
 }
 
-static void exynos4_sw_reset(void)
+void exynos4_restart(char mode, const char *cmd)
 {
 	__raw_writel(0x1, S5P_SWRESET);
 }
@@ -476,10 +475,6 @@ int __init exynos_init(void)
 	/* set idle function */
 	pm_idle = exynos_idle;
 
-	/* set sw_reset function */
-	if (soc_is_exynos4210() || soc_is_exynos4212() || soc_is_exynos4412())
-		s5p_reset_hook = exynos4_sw_reset;
-
 	return sysdev_register(&exynos4_sysdev);
 }
 
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 0476c5f0887..1ac49de0f39 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -21,6 +21,8 @@ void exynos4_setup_clocks(void);
 void exynos4210_register_clocks(void);
 void exynos4212_register_clocks(void);
 
+void exynos4_restart(char mode, const char *cmd);
+
 extern struct sys_timer exynos4_timer;
 
 #ifdef CONFIG_ARCH_EXYNOS
diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c
index eeba808625a..9a2b99646d2 100644
--- a/arch/arm/mach-exynos/mach-armlex4210.c
+++ b/arch/arm/mach-exynos/mach-armlex4210.c
@@ -213,4 +213,5 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210")
 	.map_io		= armlex4210_map_io,
 	.init_machine	= armlex4210_machine_init,
 	.timer		= &exynos4_timer,
+	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 97cd5af1505..5f6b97f04b7 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -1337,4 +1337,5 @@ MACHINE_START(NURI, "NURI")
 	.init_machine	= nuri_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve        = &nuri_reserve,
+	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index cc2c6708276..9536b335691 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -698,4 +698,5 @@ MACHINE_START(ORIGEN, "ORIGEN")
 	.init_machine	= origen_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve	= &origen_reserve,
+	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index 2f4cb89aadb..375b5aa5e16 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -290,6 +290,7 @@ MACHINE_START(SMDK4212, "SMDK4212")
 	.map_io		= smdk4x12_map_io,
 	.init_machine	= smdk4x12_machine_init,
 	.timer		= &exynos4_timer,
+	.restart	= exynos4_restart,
 MACHINE_END
 
 MACHINE_START(SMDK4412, "SMDK4412")
@@ -300,4 +301,5 @@ MACHINE_START(SMDK4412, "SMDK4412")
 	.map_io		= smdk4x12_map_io,
 	.init_machine	= smdk4x12_machine_init,
 	.timer		= &exynos4_timer,
+	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index cf21d666d12..f2552ff5ddb 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -379,6 +379,7 @@ MACHINE_START(SMDKV310, "SMDKV310")
 	.init_machine	= smdkv310_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve	= &smdkv310_reserve,
+	.restart	= exynos4_restart,
 MACHINE_END
 
 MACHINE_START(SMDKC210, "SMDKC210")
@@ -388,4 +389,5 @@ MACHINE_START(SMDKC210, "SMDKC210")
 	.map_io		= smdkv310_map_io,
 	.init_machine	= smdkv310_machine_init,
 	.timer		= &exynos4_timer,
+	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 4826eabf9be..0078d062616 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -1062,4 +1062,5 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
 	.init_machine	= universal_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve        = &universal_reserve,
+	.restart	= exynos4_restart,
 MACHINE_END
-- 
cgit v1.2.3


From f88b8979d26615ce68772cebc85c3b556571afca Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 5 Nov 2011 21:30:00 +0000
Subject: ARM: restart: remove the now empty arch_reset()

Remove the now empty arch_reset() from all the mach/system.h includes,
and remove its callsite.  Remove arm_machine_restart() as this function
no longer does anything useful.

For samsung platforms, remove the include of mach/system-reset.h and
plat/system-reset.h from their respective mach/system.h headers as these
just define their arch_reset functions.  As a result, the s3c2410 and
plat-samsung system-reset.h files are no longer referenced, so remove
these files entirely.

Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-exynos/include/mach/system.h | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch/arm/mach-exynos')

diff --git a/arch/arm/mach-exynos/include/mach/system.h b/arch/arm/mach-exynos/include/mach/system.h
index 5e3220c18fc..0063a6de3dc 100644
--- a/arch/arm/mach-exynos/include/mach/system.h
+++ b/arch/arm/mach-exynos/include/mach/system.h
@@ -13,8 +13,6 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
-#include <plat/system-reset.h>
-
 static void arch_idle(void)
 {
 	/* nothing here yet */
-- 
cgit v1.2.3