From 2be7d22f062535de59babdb4b5e9de9ff31e817e Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Thu, 20 Dec 2012 13:13:19 -0800 Subject: wireless: add new wil6210 802.11ad 60GHz driver This adds support for the 60 GHz 802.11ad Wilocity card through a new driver, wil6210. Wilocity implemented the firmware, QCA maintains the device driver. Currently supported: - STA: with security - AP: limited to 1 connected STA, security disabled - Monitor: due to a hardware/firmware limitation either control or non-control frames are monitored Using a STA and AP with this drive, one can assemble a fully functional BSS. Throughput of 1.2Gbps is achieved with iperf. The wil6210 cards have on-board flash memory for the firmware, the cards comes pre-flashed and no firmware download is required. For more details see: http://wireless.kernel.org/en/users/Drivers/wil6210 Signed-off-by: Vladimir Kondratiev Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- MAINTAINERS | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'MAINTAINERS') diff --git a/MAINTAINERS b/MAINTAINERS index 4e2a1f67a1f..16c3506da16 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1353,6 +1353,14 @@ W: http://wireless.kernel.org/en/users/Drivers/ath9k S: Supported F: drivers/net/wireless/ath/ath9k/ +WILOCITY WIL6210 WIRELESS DRIVER +M: Vladimir Kondratiev +L: linux-wireless@vger.kernel.org +L: wil6210@qca.qualcomm.com +S: Supported +W: http://wireless.kernel.org/en/users/Drivers/wil6210 +F: drivers/net/wireless/ath/wil6210/ + CARL9170 LINUX COMMUNITY WIRELESS DRIVER M: Christian Lamparter L: linux-wireless@vger.kernel.org -- cgit v1.2.3