From 16c4c52435cf8bb6e5986c14d36d93a0dd4c98df Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 13 Nov 2012 18:16:43 +0100 Subject: bindings: i2c: use consistent naming for i2c binding descriptions Filenames of devictree binding documentation seems to be arbitrary and for me it is unneeded hazzle to find the corresponding documentation for a specific driver. Naming the description the same as the driver is a lot easier and makes sense to me since the driver defines the binding it understands. Also, remove a reference in one source to the binding documentation, since path information easily gets stale. Signed-off-by: Wolfram Sang Cc: Rob Herring Cc: Grant Likely Signed-off-by: Grant Likely --- Documentation/devicetree/bindings/i2c/i2c-pxa.txt | 33 +++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-pxa.txt (limited to 'Documentation/devicetree/bindings/i2c/i2c-pxa.txt') diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa.txt b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt new file mode 100644 index 00000000000..12b78ac507e --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt @@ -0,0 +1,33 @@ +* Marvell MMP I2C controller + +Required properties : + + - reg : Offset and length of the register set for the device + - compatible : should be "mrvl,mmp-twsi" where mmp is the name of a + compatible processor, e.g. pxa168, pxa910, mmp2, mmp3. + For the pxa2xx/pxa3xx, an additional node "mrvl,pxa-i2c" is required + as shown in the example below. + +Recommended properties : + + - interrupts : the interrupt number + - interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. If the parent is the default + interrupt controller in device tree, it could be ignored. + - mrvl,i2c-polling : Disable interrupt of i2c controller. Polling + status register of i2c controller instead. + - mrvl,i2c-fast-mode : Enable fast mode of i2c controller. + +Examples: + twsi1: i2c@d4011000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4011000 0x1000>; + interrupts = <7>; + mrvl,i2c-fast-mode; + }; + + twsi2: i2c@d4025000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4025000 0x1000>; + interrupts = <58>; + }; -- cgit v1.2.3