aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/nl80211.h
AgeCommit message (Collapse)AuthorFilesLines
2011-12-19cfg80211: Return beacon loss count in stationPaul Stewart1-0/+2
If station info contains a beacon loss count, return it to userspace. Signed-off-by: Paul Stewart <pstew@chromium.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15cfg80211: validate nl80211 station handling betterJohannes Berg1-1/+5
The nl80211 station handling code is a bit messy and doesn't do a lot of validation. It seems like this could be an issue for drivers that don't use mac80211 to validate everything. As cfg80211 doesn't keep station state, move the validation of allowing supported_rates to change for TDLS only in station mode to mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-06nl80211: Parse channel type attribute in an ibss join requestAlexander Simon1-0/+2
Prepare cfg80211 for IBSS HT: * extend cfg80211 ibss struct with channel_type * Check if extension channel can be used * Export can_beacon_sec_chan for use in mac80211 (will be called from ibss.c later). Signed-off-by: Alexander Simon <an.alexsimon@googlemail.com> [siwu@hrz.tu-chemnitz.de: Updates] * fix cfg80211_can_beacon_ext_chan comment * remove implicit channel_type enum assumptions * remove radar channel flags check * add HT IBSS feature flag * reword commit message Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-28{nl,cfg,mac}80211: implement dot11MeshHWMPperrMinIntervalThomas Pedersen1-0/+5
As per 802.11mb 13.9.11.3 Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-28wireless: Add NoAck per tid supportSimon Wunderlich1-0/+10
This patch contains the configuration changes in nl80211/cfg80211. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-21wireless: Support ht-capabilities over-rides.Ben Greear1-0/+14
This allows users to disable features such as HT, HT40, and to modify the MCS, AMPDU, and AMSDU settings for drivers that support it. The MCS, AMPDU, and AMSDU features that may be disabled are are reported in the phy-info netlink message as a mask. Attemping to disable features that are not supported will take no affect, but will not return errors. This is to aid backwards compatibility in user-space apps that may not be clever enough to deal with parsing the the capabilities mask. This patch only enables the infrastructure. An additional patch will enable the feature in mac80211. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-21cfg80211: process regulatory DFS region for countriesLuis R. Rodriguez1-0/+21
The wireless-regdb now has support for mapping a country to one DFS region. CRDA sends this to us now so process it so we can provide that hint to drivers. This will later be used by code for processing DFS in a way that meets the criteria for the DFS region the country belongs to. Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-11nl80211: Pass probe response data to driversArik Nemtsov1-0/+6
Pass probe-response data from usermode via beacon parameters. Signed-off-by: Guy Eilam <guy@wizery.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-11nl80211: Add probe response offload attributeArik Nemtsov1-0/+28
Notify user-space about probe-response offloading support in the driver. A wiphy flag is used to indicate support and a bitmap of protocols determines which protocols are supported. Signed-off-by: Guy Eilam <guy@wizery.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09nl80211: advertise socket TX status capabilityJohannes Berg1-0/+18
The new wifi socket TX capability should be supported by wifi drivers, let them advertise whether they do or not. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09cfg80211/mac80211: allow management TX to not wait for ACKJohannes Berg1-0/+7
For probe responses it can be useful to not wait for ACK to avoid retransmissions if the station that sent the probe is already on the next channel, so allow userspace to request not caring about the ACK with a new nl80211 flag. Since mac80211 needs to be updated for the new function prototype anyway implement it right away -- it's just a few lines of code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09cfg80211: add event for unexpected 4addr framesJohannes Berg1-1/+9
The frames are used by AP/STA WDS mode, and hostapd needs to know when such a frame was received to set up the VLAN appropriately to allow using it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09cfg80211: allow registering to beaconsJohannes Berg1-0/+7
Add the ability to register to received beacon frames to allow implementing OLBC logic in userspace. The registration is per wiphy since there's no point in receiving the same frame multiple times. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09nl80211: add API to probe a clientJohannes Berg1-0/+10
When the AP SME in hostapd is used it wants to probe the clients when they have been idle for some time. Add explicit API to support this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09nl80211: advertise device AP SMEJohannes Berg1-0/+15
Add the ability to advertise that the device contains the AP SME and what features it can support. There are currently no features in the bitmap -- probe response offload will be advertised by a few patches Arik is working on now (who took over from Guy Eilam) and a device with AP SME will typically implement and require response offload. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09nl80211: allow subscribing to unexpected class3 framesJohannes Berg1-0/+12
To implement AP mode without monitor interfaces we need to be able to send a deauth to stations that send frames without being associated. Enable this by adding a new nl80211 event for such frames that an application can subscribe to. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14nl80211: Add sta_flags to the station infoHelmut Schaa1-0/+2
Reuse the already existing struct nl80211_sta_flag_update to specify both, a flag mask and the flag set itself. This means nl80211_sta_flag_update is now used for setting station flags and also for getting station flags. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30nl80211/mac80211: allow adding TDLS peers as stationsArik Nemtsov1-0/+2
When adding a TDLS peer STA, mark it with a new flag in both nl80211 and mac80211. Before adding a peer, make sure the wiphy supports TDLS and our operating mode is appropriate (managed). In addition, make sure all peers are removed on disassociation. A TDLS peer is first added just before link setup is initiated. In later setup stages we have more info about peer supported rates, capabilities, etc. This info is reported via nl80211_set_station(). Signed-off-by: Arik Nemtsov <arik@wizery.com> Cc: Kalyan C Gaddam <chakkal@iit.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30nl80211: support sending TDLS commands/framesArik Nemtsov1-0/+42
Add support for sending high-level TDLS commands and TDLS frames via NL80211_CMD_TDLS_OPER and NL80211_CMD_TDLS_MGMT, respectively. Add appropriate cfg80211 callbacks for lower level drivers. Add wiphy capability flags for TDLS support and advertise them via nl80211. Signed-off-by: Arik Nemtsov <arik@wizery.com> Cc: Kalyan C Gaddam <chakkal@iit.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-27nl80211/cfg80211: Add support to disable CCK rate for management frameRajkumar Manoharan1-0/+13
Add a new nl80211 attribute to specify whether to send the management frames in CCK rate or not. As of now the wpa_supplicant is disabling CCK rate at P2P init itself. So this patch helps to send P2P probe request/probe response/action frames being sent at non CCK rate in 2GHz without disabling 11b rates. This attribute is used with NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_FRAME commands to disable CCK rate for management frame transmission. Cc: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19cfg80211/nl80211: Add PMKSA caching candidate eventJouni Malinen1-0/+33
When the driver (or most likely firmware) decides which AP to use for roaming based on internal scan result processing, user space needs to be notified of PMKSA caching candidates to allow RSN pre-authentication to be used. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-16nl80211/cfg80211/mac80211: fix wme docsEliad Peller1-2/+4
Add/fix some missing docs. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13nl80211/cfg80211: add match filtering for sched_scanLuciano Coelho1-0/+43
Introduce filtering for scheduled scans to reduce the number of unnecessary results (which cause useless wake-ups). Add a new nested attribute where sets of parameters to be matched can be passed when starting a scheduled scan. Only scan results that match any of the sets will be returned. At this point, the set consists of a single parameter, an SSID. This can be easily extended in the future to support more complex matches. Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13nl80211/cfg80211: add WIPHY_FLAG_AP_UAPSD flagEliad Peller1-0/+3
add WIPHY_FLAG_AP_UAPSD flag to indicate uapsd support on AP mode. Advertise it to userspace by including a new NL80211_ATTR_SUPPORT_AP_UAPSD attribute. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13cfg80211/nl80211: Indicate roaming feature capability to userspace.Vivek Natarajan1-0/+5
When the rssi of the current AP drops, both wpa_supplicant and the firmware may do a background scan to find a better AP and try to associate. Since firmware based roaming is faster, inform wpa_supplicant to avoid roaming and let the firmware decide to roam if necessary. For fullmac drivers like ath6kl, it is just enough to provide the ESSID and the firmware will decide on the BSSID. Since it is not possible to do pre-auth during roaming for fullmac drivers, the wpa_supplicant needs to completely disconnect with the old AP and reconnect with the new AP. This consumes lot of time and it is better to leave the roaming decision to the firmware. Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-26nl80211/cfg80211: add STA WME parametersEliad Peller1-0/+23
Add new NL80211_ATTR_STA_WME nested attribute that contains wme params needed by the low-level driver (uapsd_queues and max_sp). Add these params to the station_parameters struct as well. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24{nl,cfg,mac}80211: let userspace make meshif mesh gateJavier Cardona1-0/+5
Allow userspace to set NL80211_MESHCONF_GATE_ANNOUNCEMENTS attribute, which will advertise this mesh node as being a mesh gate. NL80211_HWMP_ROOTMODE must be set or this will do nothing. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24{nl,cfg,mac}80211: let userspace set RANN intervalJavier Cardona1-0/+4
Allow userspace to set Root Announcement Interval for our mesh interface. Also, RANN interval is now in proper units of TUs. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-12nl80211/cfg80211: Add extra IE configuration to AP mode setupJouni Malinen1-1/+15
The NL80211_CMD_NEW_BEACON command is, in practice, requesting AP mode operations to be started. Add new attributes to provide extra IEs (e.g., WPS IE, P2P IE) for drivers that build Beacon, Probe Response, and (Re)Association Response frames internally (likely in firmware). Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-12nl80211/cfg80211: Add crypto settings into NEW_BEACONJouni Malinen1-10/+15
This removes need from drivers to parse the beacon tail/head data to figure out what crypto settings are to be used in AP mode in case the Beacon and Probe Response frames are fully constructed in the driver/firmware. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-12nl80211/cfg80211: Allow SSID to be specified in new beacon commandJouni Malinen1-0/+24
This makes it easier for drivers that generate Beacon and Probe Response frames internally (in firmware most likely) in AP mode. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-25Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) fs: Merge split strings treewide: fix potentially dangerous trailing ';' in #defined values/expressions uwb: Fix misspelling of neighbourhood in comment net, netfilter: Remove redundant goto in ebt_ulog_packet trivial: don't touch files that are removed in the staging tree lib/vsprintf: replace link to Draft by final RFC number doc: Kconfig: `to be' -> `be' doc: Kconfig: Typo: square -> squared doc: Konfig: Documentation/power/{pm => apm-acpi}.txt drivers/net: static should be at beginning of declaration drivers/media: static should be at beginning of declaration drivers/i2c: static should be at beginning of declaration XTENSA: static should be at beginning of declaration SH: static should be at beginning of declaration MIPS: static should be at beginning of declaration ARM: static should be at beginning of declaration rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check Update my e-mail address PCIe ASPM: forcedly -> forcibly gma500: push through device driver tree ... Fix up trivial conflicts: - arch/arm/mach-ep93xx/dma-m2p.c (deleted) - drivers/gpio/gpio-ep93xx.c (renamed and context nearby) - drivers/net/r8169.c (just context changes)
2011-07-19cfg80211: allow userspace to control supported rates in scanJohannes Berg1-0/+7
Some P2P scans are not allowed to advertise 11b rates, but that is a rather special case so instead of having that, allow userspace to request the rate sets (per band) that are advertised in scan probe request frames. Since it's needed in two places now, factor out some common code parsing a rate array. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-15nl80211/cfg80211: add max_sched_scan_ie_len in the hw descriptionLuciano Coelho1-0/+3
Some chips may support different lengths of user-supplied IEs with a single scheduled scan command than with a single normal scan command. To support this, this patch creates a separate hardware description element that describes the maximum size of user-supplied information element data supported in scheduled scans. Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-15nl80211/cfg80211: add max_sched_scan_ssids in the hw descriptionLuciano Coelho1-0/+4
Some chips can scan more SSIDs with a single scheduled scan command than with a single normal scan command (eg. wl12xx chips). To support this, this patch creates a separate hardware description element that describes the amount of SSIDs supported in scheduled scans. Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-15nl80211: advertise GTK rekey support, new triggersJohannes Berg1-2/+17
Since we now have the necessary API in place to support GTK rekeying, applications will need to know whether it is supported by a device. Add a pseudo-trigger that is used only to advertise that capability. Also, add some new triggers that match what iwlagn devices can do. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08cfg80211: return -ENOENT when stopping sched_scan while not runningLuciano Coelho1-1/+2
If we try to stop a scheduled scan while it is not running, we should return -ENOENT instead of simply ignoring the command and returning success. This is more consistent with other parts of the code. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-07Update my e-mail addressMichael Büsch1-1/+1
Signed-off-by: Michael Buesch <m@bues.ch> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-06cfg80211/nl80211: support GTK rekey offloadJohannes Berg1-0/+39
In certain circumstances, like WoWLAN scenarios, devices may implement (partial) GTK rekeying on the device to avoid waking up the host for it. In order to successfully go through GTK rekeying, the KEK, KCK and the replay counter are required. Add API to let the supplicant hand the parameters to the driver which may store it for future GTK rekey operations. Note that, of course, if GTK rekeying is done by the device, the EAP frame must not be passed up to userspace, instead a rekey event needs to be sent to let userspace update its replay counter. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16Merge branch 'master' of ↵John W. Linville1-1/+301
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-agn-tx.c net/mac80211/sta_info.h
2011-05-16nl80211: Move peer link state definition to nl80211Javier Cardona1-3/+38
These definitions need to be exposed now that we can set the peer link states via NL80211_ATTR_STA_PLINK_STATE. They were already being (opaquely) reported by NL80211_STA_INFO_PLINK_STATE. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16cfg80211: advertise possible interface combinationsJohannes Berg1-1/+121
Add the ability to advertise interface combinations in nl80211. This allows the driver to indicate what the combinations are that it supports. "Combinations" of just a single interface are implicit, as previously. Note that cfg80211 will enforce that the restrictions are met, but not for all drivers yet (once all drivers are updated, we can remove the flag and enforce for all). When no combinations are actually supported, an empty list will be exported so that userspace can know if the kernel exported this info or not (although it isn't clear to me what tools using the info should do if the kernel didn't export it). Since some interface types are purely virtual/software and don't fit the restrictions, those are exposed in a new list of pure SW types, not subject to restrictions. This mainly exists to handle AP-VLAN and monitor interfaces in mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11cfg80211/nl80211: add interval attribute for scheduled scansLuciano Coelho1-9/+16
Introduce NL80211_ATTR_SCHED_SCAN_INTERVAL as a required attribute for NL80211_CMD_START_SCHED_SCAN. This value informs the driver at which intervals the scheduled scan cycles should be executed. Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11cfg80211/nl80211: add support for scheduled scansLuciano Coelho1-0/+25
Implement new functionality for scheduled scan offload. With this feature we can scan automatically at certain intervals. The idea is that the hardware can perform scan automatically and filter on desired results without waking up the host unnecessarily. Add NL80211_CMD_START_SCHED_SCAN and NL80211_CMD_STOP_SCHED_SCAN commands to the nl80211 interface. When results are available they are reported by NL80211_CMD_SCHED_SCAN_RESULTS events. The userspace is informed when the scheduled scan has stopped with a NL80211_CMD_SCHED_SCAN_STOPPED event, which can be triggered either by the driver or by a call to NL80211_CMD_STOP_SCHED_SCAN. Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11nl80211: Let userspace drive the peer link management states.Javier Cardona1-0/+4
Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11nl80211: Introduce NL80211_MESH_SETUP_USERSPACE_AMPEJavier Cardona1-0/+10
Introduce a new configuration option to support AMPE from userspace. Prior to this series we only supported authentication in userspace: an authentication daemon would authenticate peer candidates in userspace and hand them over to the kernel. From that point the mesh stack would take over and establish a peer link (Mesh Peering Management). These patches introduce support for Authenticated Mesh Peering Exchange in userspace. The userspace daemon implements the AMPE protocol and on successfull completion create mesh peers and install encryption keys. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05nl80211/cfg80211: WoWLAN supportJohannes Berg1-0/+99
This is based on (but now quite far from) the original work from Luis and Eliad. Add support for configuring WoWLAN triggers, and getting the configuration out again. Changes from the original patchset are too numerous to list, but one important change needs highlighting: the suspend() callback is passed NULL for the trigger configuration if userspace has not configured WoWLAN at all. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25Merge branch 'master' of ↵John W. Linville1-4/+30
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-core.c drivers/net/wireless/rt2x00/rt2x00queue.c drivers/net/wireless/rt2x00/rt2x00queue.h
2011-04-12{mac|nl}80211: Add station connected timeMohammed Shafi Shajakhan1-0/+2
Add station connected time in debugfs. This will be helpful to get a measure of stability of the connection and for debugging stress issues Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-12nl80211: New notification to discover mesh peer candidates.Javier Cardona1-0/+12
Notify userspace when a beacon/presp is received from a suitable mesh peer candidate for whom no sta information exists. Userspace can then decide to create a sta info for the candidate. If userspace is not ready to authenticate the peer right away, it can create the sta info with the authenticated flag unset and set it later. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>