path: root/drivers/tty/serial/amba-pl011.c
AgeCommit message (Collapse)AuthorFilesLines
2012-01-24serial: amba-pl011: lock console writes against interruptsRabin Vincent1-0/+14
Protect against pl011_console_write() and the interrupt for the console UART running concurrently on different CPUs. Otherwise the console_write could spin for a long time waiting for the UART to become not busy, while the other CPU continuously services UART interrupts and keeps the UART busy. The checks for sysrq and oops_in_progress are taken from 8250.c. Cc: stable <stable@vger.kernel.org> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Reviewed-by: Bibek Basu <bibek.basu@stericsson.com> Reviewed-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24amba-pl011: do not disable RTS during shutdownShreshtha Kumar Sahu1-2/+14
In present driver, shutdown clears RTS and DTR in CR register. But the documentation "Documentation/serial/driver" suggests not to disable RTS and DTR in shutdown(). Also RTS and DTR is preserved between shutdown and startup calls, i.e. these are restored in startup if they were enabled while doing shutdown. So that if RTS and DTR are set using pl011_set_mctrl then it should continue even after shutdown->startup sequence. For throttling/unthrottling user should call pl011_set_mctrl. Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-17Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-4/+4
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits) ARM: mach-shmobile: specify CHCLR registers on SH7372 dma: shdma: fix runtime PM: clear channel buffers on reset dma/imx-sdma: save irq flags when use spin_lock in sdma_tx_submit dmaengine/ste_dma40: clear LNK on channel startup dmaengine: intel_mid_dma: remove legacy pm interface ASoC: mxs: correct 'direction' of device_prep_dma_cyclic dmaengine: intel_mid_dma: error path fix dmaengine: intel_mid_dma: locking and freeing fixes mtd: gpmi-nand: move to dma_transfer_direction mtd: fix compile error for gpmi-nand mmc: mxs-mmc: fix the dma_transfer_direction migration dmaengine: add DMA_TRANS_NONE to dma_transfer_direction dma: mxs-dma: Don't use CLKGATE bits in CTRL0 to disable DMA channels dma: mxs-dma: make mxs_dma_prep_slave_sg() multi user safe dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled. dma: mxs-dma: fix a typo in comment DMA: PL330: Remove pm_runtime_xxx calls from pl330 probe/remove video i.MX IPU: Fix display connections i.MX IPU DMA: Fix wrong burstsize settings dmaengine/ste_dma40: allow fixed physical channel ... Fix up conflicts in drivers/dma/{Kconfig,mxs-dma.c,pl330.c} The conflicts looked pretty trivial, but I'll ask people to verify them.
2011-11-22serial: pl011: Enable module alias autogeneration for AMBA driversDave Martin1-0/+2
Signed-off-by: Dave Martin <dave.martin@linaro.org>
2011-11-17Merge branch 'dma_slave_direction' into next_test_dirnVinod Koul1-4/+4
resolved conflicts: drivers/media/video/mx3_camera.c
2011-10-31spi, serial: move to dma_transfer_directionVinod Koul1-4/+4
fixup usage of dma direction by introducing dma_transfer_direction, this patch moves spi, serial drivers to use new enum Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Alan Cox <alan@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@iki.fi>
2011-09-27clk: amba-pl011: convert to clk_prepare()/clk_unprepare()Russell King1-1/+13
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-06-16amba pl011: workaround for uart registers lockupShreshtha Kumar Sahu1-1/+122
This workaround aims to break the deadlock situation which raises during continuous transfer of data for long duration over uart with hardware flow control. It is observed that CTS interrupt cannot be cleared in uart interrupt register (ICR). Hence further transfer over uart gets blocked. It is seen that during such deadlock condition ICR don't get cleared even on multiple write. This leads pass_counter to decrease and finally reach zero. This can be taken as trigger point to run this UART_BT_WA. Workaround backups the register configuration, does soft reset of UART using BIT-0 of PRCC_K_SOFTRST_SET/CLEAR registers and restores the registers. This patch also provides support for uart init and exit function calls if present. Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-19tty: remove invalid location line in file headerJovi Zhang1-2/+0
remove invalid location line in each file header after location moved from driver/char to driver/tty Signed-off-by: Jovi Zhang <bookjovi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-17Merge branches 'aaci', 'mmci-dma', 'pl' and 'pl011' into driversRussell King1-62/+451
2011-03-10ARM: 6764/1: pl011: factor out FIFO to TTY codeLinus Walleij1-91/+66
This piece of code was just slightly different between the DMA and IRQ paths, in DMA mode we surely shouldn't read more than 256 character either, so factor this out in its own function and use for both DMA and PIO mode. Tested on Ux500 and U300. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-10ARM: 6763/1: pl011: add optional RX DMA to PL011 v2Linus Walleij1-20/+434
This adds an optional RX DMA codepath for the devices that support this by using the apropriate burst sizes instead of pulling single bytes. Includes portions of code written by Russell King during a PL08x hacking session. This has been tested on U300 and Ux500. Tested-by: Jerzy Kasenberg <jerzy.kasenberg@tieto.com> Tested-by: Grzegorz Sygieda <grzegorz.sygieda@tieto.com> Tested-by: Marcin Mielczarczyk <marcin.mielczarczyk@tieto.com> Signed-off-by: Per Forlin <per.friden@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-23ARM: amba: make probe() functions take const id tablesRussell King1-1/+1
Make Primecell driver probe functions take a const pointer to their ID tables. Drivers should never modify their ID tables in their probe handler. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-13tty: move drivers/serial/ to drivers/tty/serial/Greg Kroah-Hartman1-0/+1519
The serial drivers are really just tty drivers, so move them to drivers/tty/ to make things a bit neater overall. This is part of the tty/serial driver movement proceedure as proposed by Arnd Bergmann and approved by everyone involved a number of months ago. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl> Cc: Michael H. Warfield <mhw@wittsend.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>