aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/lpfc/lpfc_debugfs.c
AgeCommit message (Collapse)AuthorFilesLines
2011-12-15[SCSI] lpfc 8.3.28: Critical Miscellaneous fixesJames Smart1-59/+113
- Make lpfc_sli4_pci_mem_unset interface type aware (CR 124390) - Convert byte count to word count when calling __iowrite32_copy (CR 122550) - Checked the ERR1 and ERR2 registers for error attention due to SLI Port state affected by forced debug dump. (CR 122986, 122426, 124859) - Use the lpfc_readl routine instead of the readl for the port status register read in lpfc_handle_eratt_s4 (CR 125403) - Call lpfc_sli4_queue_destroy inside of lpfc_sli4_brdreset before doing a pci function reset (CR 125124, 125168, 125572, 125622) - Zero out the HBQ when it is allocated (CR 125663) - Alter port reset log messages to indicate error type (CR 125989) - Added proper NULL pointer checking to all the places that accessing the queue memory (CR 125832) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-31scsi: Fix up files implicitly depending on module.h inclusionPaul Gortmaker1-0/+1
The module.h header was implicitly present everywhere, so files with no explicit include of the module infrastructure would build anyway. We are now removing the implicit include, and so we need to call out the module.h file that we need explicitly. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-16[SCSI] lpfc 8.3.27: T10 additions for SLI4James Smart1-0/+181
Added T10 DIFF error injection code. Added T10 DIFF structure definitions for SLI4 devices. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-27[SCSI] lpfc 8.3.25: Enhancements to Debug infrastructureJames Smart1-28/+1326
Enhancements to Debug infrastructure - debugfs additions for new hardware. - Correct stack overflow in lpfc_debugfs_dumpHBASlim_data() - Correct warning on uninitialized reg_val in lpfc_idiag_drbacc_write() - Separated the iDiag command for capturing mailbox commands for generic issue mailbox command entry point and for BSG multi-buffer handling. - Added capturing dumping capabiliy of mailbox command and external buffer for the completion of the mailbox command so that the outcome can be examined. - Changed all the iDiag command structure data array indexing introduced so far with properly defined macros. - Added SLI4 device PCI BAR memory mapped register read/browse, write-by- value, set-bit, and clear-bit methods for both interface type 0 and interface type 2. - Corrected warnings on mbxstatus being uninitialized in error paths in lpfc_bsg.c Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] lpfc: Silence DEBUG_STRICT_USER_COPY_CHECKS=y warningStephen Boyd1-1/+2
Enabling DEBUG_STRICT_USER_COPY_CHECKS causes the following warning: In file included from arch/x86/include/asm/uaccess.h:573, from include/linux/uaccess.h:5, from include/linux/highmem.h:7, from include/linux/pagemap.h:10, from include/linux/blkdev.h:12, from drivers/scsi/lpfc/lpfc_debugfs.c:21: In function 'copy_from_user': arch/x86/include/asm/uaccess_64.h:65: warning: call to 'copy_from_user_overflow' declared with attribute warning: copy_from_user() buffer size is not provably correct presumably due to buf_size being signed causing GCC to fail to see that buf_size can't become negative. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-05-26[SCSI] lpfc 8.3.24: Miscellaneous Fixes and CorrectionsJames Smart1-4/+6
Miscellaneous Fixes and Corrections - Remove the memset in the lpfc_sli4_remove_rpi_hdrs call. - Correct swapping of SGE word 2 relative to offset value - Reorganize CQ and EQ usage to comply with SLI4 Specification. - Expand the driver to check the rn bit. Only detect an error if the error bit is set and the RN bit is NOT set. - If mailbox completion code is not success AND the mailbox status is success, then and only then will the driver overwrite the mailbox status. - When driver initializing device, if the device is on a PCIe bus, set PCI's "needs fundamental reset" bit so that EEH uses fundamental reset instead of hot reset for recovery. - Prevent driver from using new WWN when changed in firmware (until driver reload) - When HBA reports maximum SGE size > 0xffffffff (infinite), override with 0x80000000. - Fixed potential missed SLI4 device initialization failure conditions. - Added 100ms delay before driver action following IF_TYPE_2 function reset. - Reverted patch to UNREG/REG on PLOGI to mapped/unmapped node. - Add a check for the CVL received flag in the fcf inuse routine to avoid unregistering the fcf if Devloss fires before Delay discover timer fires. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-01[SCSI] lpfc 8.3.23: Debugfs enhancementsJames Smart1-218/+713
Debugfs enhancements - Added iDiag support for new adapters. - Added queue entry access methods. - Fix host/port index in decimal - Added Doorbell register access methods. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-31Fix common misspellingsLucas De Marchi1-4/+4
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-02-18[SCSI] lpfc 8.3.21: Debugfs additionsJames Smart1-52/+902
- Add the driver debugfs framework for supporting debugfs read and write operations, and iDiag command structure. - Add read and write to SLI4 device PCI config space registers. - Add the driver support of debugfs PCI config space register bits set/clear methods to the provided bitmask. - Add iDiag driver support for SLI4 device queue diagnostic. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-18[SCSI] lpfc 8.3.21: Initialization and user interface changesJames Smart1-4/+4
- Make link speed not supported by port message an error message. - Add support for new SLI failure codes add sysfs parameter to reflect the security setting and current state. - Add all lpfc module parameters to the /sys/modules/lpfc/parameters directory. [jejb: fix up compile failure] Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-12-04[SCSI] lpfc 8.3.5: fix sysfs parameters, vport creation and other bugs and ↵James Smart1-5/+5
update logging This patch include the following fixes and changes: - Fix crash when "error" is echoed to board_mode sysfs parameter - Fix FCoE Parameter parsing in regions 23 - Fix driver crash when creating vport with large number of targets on SLI4 - Fix bug with npiv message being logged when it is not supported by the adapter - Fix a potential dereferencing mailbox structure after free bug - Fix firmware crash after vport create with high target count - Error out requests to set board_mode to warm restart via sysfs on SLI4 HBAs - Fix Block guard logging - Fix a memory corruption issue during GID_FT IO prep - Fix crash while processing unsolicited FC frames - Fix failed to allocate XRI message is not a critical failure - Update and fix formatting in some log messages - Fix missing new line characters in log messages - Removed the use of the locally defined FC transport layer related macros - Check the rsplen in lpfc_handle_fcp_err function before using rsplen Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-06-15debugfs: Fix terminology inconsistency of dir name to mount debugfs filesystem.GeunSik Lim1-2/+1
Many developers use "/debug/" or "/debugfs/" or "/sys/kernel/debug/" directory name to mount debugfs filesystem for ftrace according to ./Documentation/tracers/ftrace.txt file. And, three directory names(ex:/debug/, /debugfs/, /sys/kernel/debug/) is existed in kernel source like ftrace, DRM, Wireless, Documentation, Network[sky2]files to mount debugfs filesystem. debugfs means debug filesystem for debugging easy to use by greg kroah hartman. "/sys/kernel/debug/" name is suitable as directory name of debugfs filesystem. - debugfs related reference: http://lwn.net/Articles/334546/ Fix inconsistency of directory name to mount debugfs filesystem. * From Steven Rostedt - find_debugfs() and tracing_files() in this patch. Signed-off-by: GeunSik Lim <geunsik.lim@samsung.com> Acked-by : Inaky Perez-Gonzalez <inaky@linux.intel.com> Reviewed-by : Steven Rostedt <rostedt@goodmis.org> Reviewed-by : James Smart <james.smart@emulex.com> CC: Jiri Kosina <trivial@kernel.org> CC: David Airlie <airlied@linux.ie> CC: Peter Osterlund <petero2@telia.com> CC: Ananth N Mavinakayanahalli <ananth@in.ibm.com> CC: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> CC: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-08[SCSI] lpfc 8.3.2 : Update of copyrightsJames Smart1-1/+1
Update of copyrights on modified files Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] lpfc 8.3.2 : Addition of SLI4 Interface - Base SupportJames Smart1-0/+2
Adds new hardware and interface definitions. Adds new interface routines - utilizing the reorganized layout of the driver. Adds SLI-4 specific functions for attachment, initialization, teardown, etc. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] lpfc 8.3.2 : Reorganization for SLI4James Smart1-6/+11
Preps the organization of the driver so that the bottom half, which interacts with the hardware, can share common code sequences for attachment, detachment, initialization, teardown, etc with new hardware. For very common code sections, which become specific to the interface type, the driver uses an indirect function call. The function is set at initialization. For less common sections, such as initialization, the driver looks at the interface type and calls the routines relative to the interface. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-27[SCSI] lpfc 8.3.1: misc fixes/changesJames Smart1-3/+2
8.3.1 Fixes/Changes : - Fix incorrect byte-swapping on word 4 of IOCB (data length) which caused LUNs to not be discovered on big-endian (e.g. PPC) - Remove a bad cast of MBslimaddr which loses the __iomem (sparse) - Make lpfc_debugfs_mask_disc_trc static (sparse) - Correct misspelled word BlockGuard in lpfc_logmsg.h comment - Replaced repeated code segment for canceling IOCBs from a list with a function call, lpfc_sli_cancel_iocbs(). - Increased HBQ buffers to support 40KB SSC sequences. - Added sysfs interface to update speed and topology parameter without link bounce. - Fixed bug with sysfs fc_host WWNs not being updated after changing the WWNs. - Check if the active mailbox is NULL in the beginning of the mailbox timeout handler - fixes panic in the mailbox timeout handler while running IO stress test - Fixed system panic in lpfc_pci_remove_one() due to ndlp indirect reference to phba through vport - Removed de-reference of scsi device after call to scsi_done() to fix panic in scsi completion path while accessing scsi device after scsi_done is called. - Fixed "Nodelist not empty" message when unloading the driver after target reboot test - Added LP2105 HBA model description - Added code to print all 16 words of unrecognized ASYNC events - Fixed memory leak in vport create + delete loop - Added support for handling dual error bit from HBA - Fixed a driver NULL pointer dereference in lpfc_sli_process_sol_iocb - Fixed a discovery bug with FC switch reboot in lpfc_setup_disc_node - Take NULL termintator into account when calculating available buffer space Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-27[SCSI] lpfc 8.3.1 : Fix up kernel-doc function commentsJames Smart1-20/+20
Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] lpfc: constify virtual function tablesJan Engelhardt1-8/+8
Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Acked-by: James Smart <James.Smart@Emulex.Com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] lpfc 8.3.0 : Hook lpfc's debugfs into KconfigJames Smart1-6/+6
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] lpfc 8.3.0 : Add BlockGuard support (T10-DIF) codeJames Smart1-0/+152
Add SCSI data path, error handling, and debugfs code to complete BlockGuard support. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] lpfc 8.2.8 v2 : Add statistical reporting control and additional fc ↵James Smart1-0/+1
vendor events Added support for new sysfs attributes: lpfc_stat_data_ctrl and lpfc_max_scsicmpl_time. The attributes control statistical reporting of io load. Added support for new fc vendor events for error reporting. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] lpfc 8.2.8 : Miscellaneous Bug FixesJames Smart1-10/+10
Miscellaneous Fixes: - Fix the wrong variable name used for checking node active usage status - Fix numerous duplicate log message numbers - Fix change KERN_WARNING messages to KERN_INFO. - Stop sending erroneous LOGO to fabric after vport is already terminated - Fix HBQ allocates that were kalloc'ing w/ GFP_KERNEL while holding a lock. - Fix gcc 4.3.2 compiler warnings and a sparse warning - Fix bugs in handling unsolicited ct event queue - Reorder some of the initial link up checks, to remove odd VPI states. - Correct poor VPI handling - Add debug messages - Expand Update_CFG mailbox definition - Fix handling of VPD data offsets - Reorder loopback flags - convert to use offsetof() Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] lpfc 8.2.8 : Update driver for new SLI-3 featuresJames Smart1-40/+12
Update driver for new SLI-3 features: - interrupt enhancements - lose adapter doorbell writes - inlining support for FCP_Ixx cmds Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] lpfc 8.2.8 : Add kernel-doc function headersJames Smart1-17/+310
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-08-23removed unused #include <linux/version.h>'sAdrian Bunk1-1/+0
This patch lets the files using linux/version.h match the files that #include it. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-10[SCSI] lpfc 8.2.6 : Multiple discovery fixesJames Smart1-0/+2
Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] lpfc 8.2.4 : Enhance debugfs useJames Smart1-24/+120
Enhance debugfs to dump HBA SLIM as well as Host SLIM Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] lpfc 8.2.3 : Miscellaneous Small Fixes - part 2James Smart1-6/+7
Miscellaneous Small Fixes - part 2 - Fix ndlp left in PLOGI state after link up - Fix cannot rcv unsol ELS frames after running HBA resets for a few minutes - Fix HBQ buffer_count implemention - Fix RPI leak - Fix crash while deleting vports while HBA is reset - Revert the FCP Fbits offset back to 7 - Fix panic when deleting vports - Remove unused code in switch statement outside of a case - Reject PLOGI from invalid PName or NName of 0 - Ignore PLOGI responses from WWPName or WWNName of 0 - Fix debugfs hbqinfo display for ppc - Added 8G to list of supported speeds for sysfs parameter - Defer ndlp cleanup to dev-loss timeout handler - Added support for WRITE_VPARMS mailbox command by applications Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-10-18[SCSI] lpfc: lpfc_debugfs.c: fix typoAdrian Bunk1-1/+1
This patch fixes a typo introduced by commit bbfbbbc1182f8b44c8cc4c99f4a3f3a512149022. It wasn't a compile error since CONFIG_LPFC_DEBUG_FS is not (yet?) available as an option. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] kmalloc + memset conversion to kzallocMariusz Kozlowski1-3/+1
In NCR_D700, a4000t, aic7xxx_old, bvme6000, dpt_i2o, gdth, lpfc, megaraid, mvme16x osst, pluto, qla2xxx, zorro7xx Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] NCR_D700, lpfc: Clean up duplicate includesJesper Juhl1-1/+0
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-01[SCSI] lpfc 8.2.2 : Style cleanupsJames Smart1-5/+3
- Clean up all instances of mixed tab-space indentation - Clean up sparse build errors - Add appropriate static's Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-01[SCSI] lpfc 8.2.2 : Miscellaneous Bug FixesJames Smart1-6/+5
- Fix vport ndlp ref counting errors - Fix use after free of ndlp structure - Use the correct flag to check for LOADING setting. - Fix driver unload bugs (related to shost references) after link down or rscn - Fix up HBQ initialization - Fix port_list locking around driver unload. - Fix references to hostdata as a phba - Fix GFFID type offset to work correctly with big endian structure. - Only call pci_disable_msi if the pci_enable_msi succeeded - Fix vport_delete wait/fail if in discovery - Put a reference on the nameservers ndlp when performing CT traffic. - Remove unbalanced hba unlock. - Fix up HBQ processing - Fix lpfc debugfs discovery trace output for ELS rsp cmpl - Send ADISC when rpi is 0 - Stop FDISC retrying forever - Unable to retrieve correct config parameter for vport - Fix sli_validate_fcp_iocb, sli_sum_iocb, sli_abort_iocb to be vport-aware. - Fix index-out-of-range error in iocb. Spotted by Coverity. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-01[SCSI] lpfc 8.2.2 : Miscellaneous management and logging modsJames Smart1-1/+158
- Remove the "management_version" sysfs parameter (was unused) - Add HBQ information to lpfc debugfs - Change lpfc_npiv_enable name back to lpfc_enable_npiv (internal stds) - Remove "issue_lip" attribute from the vports transport template Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-01[SCSI] lpfc 8.2.2 : Rework the lpfc_printf_log() macroJames Smart1-36/+26
Rework the lpfc_printf_log() macro so that logging is enabled on a per-vport basis. Used to be on a physical-port basis, thus logging with large numbers of vports became a mess. Required redefinition of the macro, and an update of every use. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-01[SCSI] lpfc 8.2.2 : Error messages and debugfs updatesJames Smart1-45/+398
Error messages and debugfs updates: - Fix up GID_FT error messages - Enhance debugfs with slow_ring_trace, dumpslim and nodelist information - Add log type (and messages) for vport state changes - Enhance log messages when retries ELS fail Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17[SCSI] lpfc: bug fixesJames Smart1-0/+508
Following the NPIV support, the following changes have been accumulated in the testing and qualification of the driver: - Fix affinity of ELS ring to slow/deferred event processing - Fix Ring attention masks - Defer dev_loss_tmo timeout handling to worker thread - Consolidate link down error classification for better error checking - Remove unused/deprecated nlp_initiator_tmr timer - Fix for async scan - move adapter init code back into pci_probe_one context. Fix async scan interfaces. - Expand validation of ability to create vports - Extract VPI resource cnt from firmware - Tuning of Login/Reject policies to better deal with overwhelmned targets - Misc ELS and discovery fixes - Export the npiv_enable attribute to sysfs - Mailbox handling fix - Add debugfs support - A few other small misc fixes: - wrong return values, double-frees, bad locking - Added adapter failure heartbeat Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>