aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/bfa/bfa_svc.h
AgeCommit message (Collapse)AuthorFilesLines
2012-01-10[SCSI] bfa: Revert back the current LUN Masking Implementation.Krishna Gudipati1-5/+0
This patch reverts the current LUN Masking Implementation. We re-implemented this feature using the SCSI Slave Callout's as per the review comments. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-27[SCSI] bfa: Introduced initiator based lun masking feature.Krishna Gudipati1-0/+15
- Added support to enable initiator based lun masking. - Initiator based Lun masking works similar to zoning where initiator port is allowed to see only those LUNs which are configured to be seen. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-27[SCSI] bfa: Added support to collect and reset fcport statsKrishna Gudipati1-9/+5
- Added support to collect and reset fcport stats. - Modified design to allow multiple requests for fcport stats. - fcport will remember the stats request in its stats_pending queue and service each of the queued requests after receiving a firmware response for the prior request. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: Added HBA diagnostics support.Krishna Gudipati1-0/+47
- Added diagnostics sub-module to BFA. - Implemented interface to perform memtest/loopback test and some other diagnostics tests. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: DMA memory allocation enhancement.Krishna Gudipati1-27/+48
- Modified the design such that each BFA sub-module will provide the amount of DMA and KVA memory needed by it and queues the same request to the global dma and kva info queues. - During the memory allocation we iterate over this queue to allocate the dma and kva memory requested by sub-modules. - The change is needed to avoid requesting the aggregate amount of memory needed by all the BFA sub-modules as one contiguous chunk. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: Brocade-1860 Fabric Adapter vHBA support.Krishna Gudipati1-1/+10
- Introduced partitioning of the BFA resources. - Added h/w queue ID in CPE messages, firmware uses h/w queue ID from messages to pick a matching RME queue. - Added message header to bfa_reqq_produce(). h/w queue ID is set in the message header and firmware modules use h/w queue ID from message header instead of from cpqe event. - Made changes to allow using all 256 queues of Brocade-1860 asic. Previously only a single queue per queue group was used. - Added function tag to BFI message header. Only used by FC BFI messages. Used to translate host tag to firmware tag. bfa_lpuid() is changed to bfa_fn_lpu() that encodes both PCI function and port ID in BFI message header. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: Added Fabric Assigned Address(FAA) supportKrishna Gudipati1-0/+9
- Updated/added data structures and definitions to support FAA protocol. - Modified the IOC state machine to support FAA. - Introduced FAA feature configuration - enable/disable/query. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: FC credit recovery and misc bug fixes.Krishna Gudipati1-2/+6
- Introduce FC credit recovery. - Added module parameter to enable/disable credit recovery. Bug Fixes: - Removed check for ignoring plogi from initiator in switched fabric mode. - The ABTS for PLOGI is going out few millisecs earlier due to FW timer calibration (around 300 miilisecs earlier). So there is a window if an accept comes during this time HBA would have initiated an ABORT. - Added 1 to FC_ELS_TOV for compensating for FW timer. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: Add pbc port disable check and fix LPS message nameKrishna Gudipati1-0/+1
- Add PBC port Disabled condition check. - Rename incorrectly named LPS I2H messages. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2010-12-21[SCSI] bfa: direct attach mode fix.Krishna Gudipati1-0/+1
- Direct attach is not working due to the check of PID in fcxp_send request. - Added logic to set the lps->lp_pid with the PID assigned for n2n mode. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] bfa: Store port configuration in flash for persistency.Krishna Gudipati1-0/+1
When the bfa driver is loaded a flogi is sent without the knowledge of trunking configuration. This normal flogi causes the switch ports which had trunking enabled to go to persistent offline. Solution is to store the port configuration (which has trunking info) in the flash for persistency. The firmware will read this configuration when the very first fcport enable is received. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] bfa: clean up one line functionsMaggie Zhang1-17/+12
Cleaned up one line functions. Signed-off-by: Maggie Zhang <xmzhang@brocade.com> Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] bfa: remove unused and empty functionsMaggie Zhang1-32/+0
Removed unused and empty functions. Signed-off-by: Maggie Zhang <xmzhang@brocade.com> Signed-off-by: Jing Huang <xmzhang@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] bfa: fix comments for header filesJing Huang1-21/+20
This patch addresses the comments from Randy Dunlap (Randy.Dunlap@oracle.com) regarding comment blocks that begining with "/**". bfa driver comments currently do not follow kernel-doc convention, we hence replace all /** with /* and **/ with */. Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-16[SCSI] bfa: cleanup driverKrishna Gudipati1-0/+657
We have flattened the BFA hierarchy and also reduced the number of source and header files we used to have earlier. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>