aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ixgbe/ixgbe_main.c
AgeCommit message (Collapse)AuthorFilesLines
2011-08-10intel: Move the Intel wired LAN driversJeff Kirsher1-7934/+0
Moves the Intel wired LAN drivers into drivers/net/ethernet/intel/ and the necessary Kconfig and Makefile changes. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-04ixgbe: fix __ixgbe_notify_dca() bail out codeDon Skidmore1-1/+1
The way __ixgbe_notify_dca() was currently set up it would not be possible to add a requester. Both cases of the IXGBE_FLAG_DCA_ENABLED bit being on and off would lead to the function exiting for a DCA_PROVIDER_ADD. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-04intel drivers: repair missing flush operationsJesse Brandeburg1-0/+1
after review of all intel drivers, found several instances where drivers had the incorrect pattern of: memory mapped write(); delay(); which should always be: memory mapped write(); write flush(); /* aka memory mapped read */ delay(); explanation: The reason for including the flush is that writes can be held (posted) in PCI/PCIe bridges, but the read always has to complete synchronously and therefore has to flush all pending writes to a device. If a write is held and followed by a delay, the delay means nothing because the write may not have reached hardware (maybe even not until the next read) Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-21ixgbe: convert to ndo_fix_featuresDon Skidmore1-25/+110
Private rx_csum flags are now duplicate of netdev->features & NETIF_F_RXCSUM. We remove those duplicates and now use the net_device_ops ndo_set_features. This was based on the original patch submitted by Michal Miroslaw <mirq-linux@rere.qmqm.pl>. I also removed the special case not requiring a reset for X540 hardware. It is needed just as it is in 82599 hardware. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-21ixgbe: only enable WoL for magic packet by defaultAndy Gospodarek1-6/+3
Martin Wilck <martin.wilck@ts.fujitsu.com> reported that systems using the ixgbe-driver that were capable of WoL were rebooting almost as soon as they were shut down. This is because the default WoL settings enabled magic packet, broadcast, unicast, and multicast. Other Intel devices seem to use the stored eeprom value for initial WoL capabilities. The 82578DM (e1000e) and 82576 (igb) the devices I looked at had only the magic packet enabled in the eeprom, so that seems appropriate on ixgbe-based devices as well. I set the WoL options on my 82578DM to be the same default as the ixgbe devices (umbg) and saw the same as Martin -- almost as soon as my box shutdown, it booted again. This patch changes the default to only be the magic packet. This is the same as the default for most Intel and non-Intel hardware currently upstream. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> CC: Martin Wilck <martin.wilck@ts.fujitsu.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-21ixgbe: remove ifdef check for non-existent defineEmil Tantilov1-2/+0
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-21ixgbe: Pass staterr instead of re-reading status and error bits from descriptorAlexander Duyck1-11/+28
This change is meant to address possible race conditions from the status and error bits on the RX descriptors being re-read by multiple functions in the RX cleanup path. To resolve this I have added code that will pass the staterr value to those functions. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-21ixgbe: Move interrupt related values out of ring and into q_vectorAlexander Duyck1-125/+45
This change moves work_limit, total_packets, and total_bytes into the ring container struct of the q_vector. The advantage of this is that it should reduce the size of memory used in the event of multiple rings being assigned to a single q_vector. In addition it should help to reduce the total workload for calculating itr since now total_packets and total_bytes will be the total work done of the interrupt instead of for the ring. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-21ixgbe: add structure for containing RX/TX rings to q_vectorAlexander Duyck1-75/+75
This patch adds support for a ring container structure to be used within the q_vector. The basic idea is to provide a means of separating the RX and TX rings while maintaining a common structure for their containment. The advantage to this is that later we should be able to pass this structure to the update_itr functions without needing to pass individual rings. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-21ixgbe: inline the ixgbe_maybe_stop_tx functionAlexander Duyck1-1/+1
The ixgbe_maybe_stop_tx function is only a few lines long and is called multiple times through the xmit hotpath. In order to streamline things it makes sense to just inline it. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-21ixgbe: Update ATR to use recorded TX queues instead of CPU for routingAlexander Duyck1-4/+3
This change is meant to update ATR so that it will use the recorded RX queue instead of the CPU in the case of routing. This change is meant to help ixgbe default behavior to more closely match that of the kernel. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-11ixgbe: Make certain to initialize the fdir_perfect_lock in all casesAlexander Duyck1-2/+3
This fix makes it so that the fdir_perfect_lock is initialized in all cases. This is necessary as the fdir_filter_exit routine will always attempt to take the lock before inspecting the filter table. Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-25ixgbe: remove unused fcoe.tc field and fcoe_setapp()John Fastabend1-1/+0
The fcoe.tc field is no longer used so remove it. After the field is removed there is no need to keep fcoe_setapp() around so remove it as well. And finally we can get rid of some DCB #ifdef's in the fcoe code. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-25ixgbe: Update method used for determining descriptor count for an skbAlexander Duyck1-29/+26
This patch updates the current methods used for determining if we have enough space to transmit a given skb. The current method is quite wasteful as it has us go through and determine how each page is going to be broken up. That only needs to be done if pages are larger than our maximum data per TXD. As such I have wrapped that in a page size check. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-25ixgbe: Add one function that handles most of context descriptor setupAlexander Duyck1-166/+129
There is a significant amount of shared functionality between the checksum and TSO offload configuration that is shared in regards to how they setup the context descriptors. Since so much of the functionality is shared it makes sense to move the shared functionality into a single function and just call that function from the two context descriptor specific routines. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-25ixgbe: Move all values that deal with count, next_to_use, next_to_clean to u16Alexander Duyck1-6/+7
This change updates all values dealing with count, next_to_use, and next_to_clean so that they stay u16 values. The advantage of this is that there is no re-casting of type during the propagation through the stack. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-25ixgbe: Convert IXGBE_DESC_UNUSED from macro to static inline functionAlexander Duyck1-5/+5
This change is a minor cleanup that converts the IXGBE_DESC_UNUSED macro into a static inline function just for the case of the code being a bit cleaner. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-25ixgbe: pass adapter struct instead of netdev for interrupt dataAlexander Duyck1-11/+7
This change makes it so that we pass the adapter struct instead of the netdev for most of the basic interrupts that are not associated with q_vectors. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-23ixgbe: update driver version stringDon Skidmore1-4/+4
Update the ixgbe driver version string to better match the Source Driver with similar device support. Likewise update to the current LAD Linux versioning scheme. Signed-of-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-23ixgbe: fix ring assignment issues for SR-IOV and drop casesAlexander Duyck1-3/+5
This change fixes the fact that we would trigger a null pointer dereference or specify the wrong ring if the rings were restored. This change makes certain that the DROP queue is a static value, and all other rings are based on the ring offsets for the PF. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-23ixgbe: add support for nfc addition and removal of filtersAlexander Duyck1-0/+45
This change is meant to allow for nfc to insert and remove filters in order to test the ethtool interface which includes it's own rules manager. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-23ixgbe: update perfect filter framework to support retaining filtersAlexander Duyck1-1/+1
This change is meant to update the internal framework of ixgbe so that perfect filters can be stored and tracked via software. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-23ixgbe: fix flags relating to perfect filters to support coexistenceAlexander Duyck1-22/+12
I am removing the requirement that Ntuple filters have the same number of queues and requirements as ATR. As a result this change will make it so that all the Ntuple flag does is disable ATR for now. This change fixes an issue in which we were incorrectly re-enabling ATR when we exited perfect filter mode. This was due to the fact that the logic assumed RSS and DCB were mutually exclusive which is no longer the case. To correct this we just need to add a check to guarantee DCB is disabled before re-enabling ATR. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-21ixgbe: add support for Dell CEMEmil Tantilov1-0/+4
This patch adds support for Dell CEM (Comprehensive Embedded Management)). This consists of informing the management firmware of the driver version during probe on 82599 and X540 HW. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-21ixgbe: DCB, remove unneeded ixgbe_dcb_txq_to_tc() routineJohn Fastabend1-57/+1
The ixgbe_dcb_txq_to_tc() routine was used to map TX rings to a DCB traffic class. Now that a tx_ring has a DCB traffic class associated with it this routine is no longer needed. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-21ixgbe: fix bit mask for DCB versionJohn Fastabend1-1/+1
This bit mask is wrong DCBX_HOST is always set. It was missed up until now because lldpad reprograms the device on a link event. However this is still wrong and it is best not to be mis-configured for some time immediately following ixgbe_up(). Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-21ixgbe: setup redirection table for multiple packet buffersJohn Fastabend1-1/+5
Setup RSS redirection table to be compatible with multiple packet buffers. Currently, this works on 82599 devices because the RSS redirection index is masked by the number of queues per packet buffer. This sets the cap on the RSS table to maxq. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-21ixgbe: DCB 82598 devices, tx_idx and rx_idx swappedJohn Fastabend1-2/+2
The tx_idx and rx_idx values are swapped on 82598 devices with DCB enabled. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-21ixgbe: DCB use existing TX and RX queuesJohn Fastabend1-58/+49
The number of TX and RX queues allocated depends on the device type, the current features set, online CPUs, and various compile flags. To enable DCB with multiple queues and allow it to coexist with all the features currently implemented it has to setup a valid queue count. This is done at init time using the FDIR and RSS max queue counts and allowing each TC to allocate a queue per CPU. DCB will now use available queues up to (8 x TCs) this is somewhat arbitrary cap but allows DCB to use up to 64 queues. Its easy to increase this later if that is needed. This is prep work to enable Flow Director with DCB. After this DCB can easily coexist with existing features and no longer needs its own DCB feature ring. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-21ixgbe: configure minimal packet buffers to support TCJohn Fastabend1-100/+135
ixgbe devices support different numbers of packet buffers either 8 or 4. Here we only allocate the minimal number of packet buffers required to implement the net_devices number of traffic classes. Fewer traffic classes allows for larger packet buffers in hardware. Also more Tx/Rx queues can be given to each traffic class. This patch is mostly about propagating the number of traffic classes through the init path. Specifically this adds the 4TC cases to the MRQC and MTQC setup routines. Also ixgbe_setup_tc() was sanitized to handle other traffic class value. Finally changing the number of packet buffers in the hardware requires the device to reinit. So this moves the reinit work from DCB into the main ixgbe_setup_tc() routine to consolidate the reset code. Now dcbnl_xxx ops call ixgbe_setup_tc() to configure packet buffers if needed. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-21ixgbe: consolidate MRQC and MTQC handlingJohn Fastabend1-0/+7
The MRQC and MTQC registers are configured in the main setup path but are also reconfigured in the DCB setup path. The DCB path fixes the DCB configuration by configuring the SECTXMINIFG gap which is required for DCB pause to operate correctly. This patch reduces the duplicate code and does all setup in ixgbe_setup_mtqc() and ixgbe_setup_mrqc(). Additionally, this removes the IXGBE_QDE. This write never set the WRITE bit in the register so the write was not actually doing anything. Also this was to clear the register but, it is never set and defaults to zero. If this is needed for SRIOV it should be added correctly in a follow up patch. But it's never been working so removing it here should be OK. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-21ixgbe: consolidate packet buffer allocationJohn Fastabend1-1/+15
Consolidate packet buffer allocation currently being done in the DCB path and main path. This allows the feature set and packet buffer requirements to be done once. This is prep work to allow DCB to coexist with other features namely, flow director. CC: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-06net: remove interrupt.h inclusion from netdevice.hAlexey Dobriyan1-0/+1
* remove interrupt.g inclusion from netdevice.h -- not needed * fixup fallout, add interrupt.h and hardirq.h back where needed. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-22Add appropriate <linux/prefetch.h> include for prefetch usersPaul Gortmaker1-0/+1
After discovering that wide use of prefetch on modern CPUs could be a net loss instead of a win, net drivers which were relying on the implicit inclusion of prefetch.h via the list headers showed up in the resulting cleanup fallout. Give them an explicit include via the following $0.02 script. ========================================= #!/bin/bash MANUAL="" for i in `git grep -l 'prefetch(.*)' .` ; do grep -q '<linux/prefetch.h>' $i if [ $? = 0 ] ; then continue fi ( echo '?^#include <linux/?a' echo '#include <linux/prefetch.h>' echo . echo w echo q ) | ed -s $i > /dev/null 2>&1 if [ $? != 0 ]; then echo $i needs manual fixup MANUAL="$i $MANUAL" fi done echo ------------------- 8\<---------------------- echo vi $MANUAL ========================================= Signed-off-by: Paul <paul.gortmaker@windriver.com> [ Fixed up some incorrect #include placements, and added some non-network drivers and the fib_trie.c case - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds1-454/+583
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1446 commits) macvlan: fix panic if lowerdev in a bond tg3: Add braces around 5906 workaround. tg3: Fix NETIF_F_LOOPBACK error macvlan: remove one synchronize_rcu() call networking: NET_CLS_ROUTE4 depends on INET irda: Fix error propagation in ircomm_lmp_connect_response() irda: Kill set but unused variable 'bytes' in irlan_check_command_param() irda: Kill set but unused variable 'clen' in ircomm_connect_indication() rxrpc: Fix set but unused variable 'usage' in rxrpc_get_transport() be2net: Kill set but unused variable 'req' in lancer_fw_download() irda: Kill set but unused vars 'saddr' and 'daddr' in irlan_provider_connect_indication() atl1c: atl1c_resume() is only used when CONFIG_PM_SLEEP is defined. rxrpc: Fix set but unused variable 'usage' in rxrpc_get_peer(). rxrpc: Kill set but unused variable 'local' in rxrpc_UDP_error_handler() rxrpc: Kill set but unused variable 'sp' in rxrpc_process_connection() rxrpc: Kill set but unused variable 'sp' in rxrpc_rotate_tx_window() pkt_sched: Kill set but unused variable 'protocol' in tc_classify() isdn: capi: Use pr_debug() instead of ifdefs. tg3: Update version to 3.119 tg3: Apply rx_discards fix to 5719/5720 ... Fix up trivial conflicts in arch/x86/Kconfig and net/mac80211/agg-tx.c as per Davem.
2011-05-14ixgbe: Add support for new 82599 adapterDon Skidmore1-0/+2
This patch adds support for a new adapter in the 82599 family. Included in that support is a new media_type ixgbe_media_type_fiber_lco. Signed-of-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: cleanup some minor issues in ixgbe_down()Alexander Duyck1-18/+16
This patch cleans up two minor issues in ixgbe_down. Specifically it addresses the fact that the VFs should not be pinged until after interrupts are disabled otherwise they might still get a response. It also drops the use of the txdctl temporary variable since the only bit we should be writing to the TXDCTL registers during a shutdown is the flush bit. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: Merge over-temp task into service taskAlexander Duyck1-35/+52
This change merges the over-temp task into the service task. As a result all tasklets are finally combined into once single tasklet for easier management. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: Merge ATR reinit into the service taskAlexander Duyck1-31/+34
This change merges the ATR table reinitialization into the service task. This is yet another opportunity to avoid any race conditions as we don't want to be attempting to reinitialize the table during a possible reset. In addition this change adds a counter for table reinitialization so that it can be tracked as part of the regular statistics. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: merge reset task into service taskAlexander Duyck1-23/+37
This change is meant to further help to reduce possible configuration collisions between the various tasklets. This change combines the device reset with the service task. As a result it is now not possible to be updating the link on the device while also resetting the part. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: Merge watchdog functionality into service taskAlexander Duyck1-164/+200
This patch is meant to merge the functionality of the ixgbe watchdog task into the service task. By doing this all link state functionality will be controlled by a single task. As a result the reliability of the interface will be improved as the likelihood of any race conditions is further reduced. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: Combine SFP and multi-speed fiber task into single service taskAlexander Duyck1-188/+200
This change is meant to address several race conditions with multi-speed fiber SFP+ modules in 82599 adapters. Specifically issues have been seen in which both the SFP configuration and the multi-speed fiber configuration are running simultaneously which will result in the device getting into an erroneous link down state. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: Add macvlan support for VFGreg Rose1-2/+26
Add infrastructure in the PF driver to support macvlan in the VF driver. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-07ixgbe,rcu: convert call_rcu(ring_free_rcu) to kfree_rcu()Lai Jiangshan1-6/+1
The rcu callback ring_free_rcu() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(ring_free_rcu). Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-05-07ixgbe: add ethtool counters for OS2BMCEmil Tantilov1-1/+6
OS2BMC registers are available for X540. This patch adds ethtool counters based on those registers. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-07ixgbe: add rxhash supportEmil Tantilov1-1/+13
feed RSS hash into skb->rxhash Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-04ixgbe: Cleanup PCIe bus speed infoDon Skidmore1-2/+2
PCIe connections should be expressed as GT/s (GigaTransfers per second) instead of the current Gb/s (Gigabits per second). In addition, it is incorrect because (due to PCIe gen 1 & 2 having a 20% overhead) the actually data rate, when expressed in Gb/s, is only 80% of the rate of GT/s. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-04ixgbe: fix typo error with software defined pins on 82599Don Skidmore1-1/+2
Correcting a simple typo with enabling software defined pins. I don't believe this was causing any issues but this is how it was meant to be implemented. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27ixgbe: Bump versionDon Skidmore1-2/+2
Bump the driver version number to better match up with the out of tree driver that has similar functionality. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27ixgbe: enable SCTP checksum offload for X540Don Skidmore1-1/+7
X540 supports SCTP checksum offload so enable it. It was overlooked when X540 support was initially added to the driver. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>