aboutsummaryrefslogtreecommitdiffstats
path: root/arch/mips/alchemy/devboards
AgeCommit message (Collapse)AuthorFilesLines
2012-10-11MIPS: Alchemy: Merge PB1100/1500 support into DB1000 code.Manuel Lauss4-395/+92
The PB1100/1500 are similar to their DB-cousins but with a few more devices on the bus. This patch adds PB1100/1500 support to the existing DB1100/1500 code. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: lnux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11MIPS: Alchemy: merge PB1550 support into DB1550 codeManuel Lauss4-282/+160
The PB1550 is more or less a DB1550 without the PCI IDE controller, a more complicated (read: configurable) Flash setup and some other minor changes. Like the DB1550 it can be automatically detected by reading the CPLD ID register bits. This patch adds PB1550 detection and setup to the DB1550 code. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11MIPS: Alchemy: Single kernel for DB1200/1300/1550Manuel Lauss6-54/+107
Combine support for the DB1200/PB1200, DB1300 and DB1550 boards into a single kernel image. defconfig-generated image verified on DB1200, DB1300 and DB1550. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4335/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-25Merge branches 'next/generic', 'next/alchemy', 'next/bcm63xx', ↵Ralf Baechle6-78/+36
'next/cavium', 'next/jz4740', 'next/lantiq', 'next/loongson1b' and 'next/netlogic' into mips-for-linux-next
2012-07-23MIPS: Alchemy: use IS_ENABLED() macroFlorian Fainelli2-4/+4
Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3331/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Alchemy: handle db1200 cpld ints as they come inManuel Lauss1-4/+1
Remove the loop in the cascade handler and instead unconditionally handle just the first set interrupt coming from the CPLD. This gets rid of a lot of spurious interrupts being triggered for the SMSC91111 ethernet chip especially under high(er) IDE load: "eth0: spurious interrupt (mask = 0xb3)" Verified on DB1200 and DB1300. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3288/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Alchemy: devboards: kill prom.cManuel Lauss3-61/+31
move contents to already existing platform.c file. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3287/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Alchemy: use 64MB RAM as minimum for devboardsManuel Lauss1-10/+1
YAMON on all devboards provides the "memsize" envvar; in the unlikely case that it can't be parsed just assume 64MB, which all boards have at least. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3286/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-06-01Merge tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtdLinus Torvalds3-9/+0
Pull mtd update from David Woodhouse: - More robust parsing especially of xattr data in JFFS2 - Updates to mxc_nand and gpmi drivers to support new boards and device tree - Improve consistency of information about ECC strength in NAND devices - Clean up partition handling of plat_nand - Support NAND drivers without dedicated access to OOB area - BCH hardware ECC support for OMAP - Other fixes and cleanups, and a few new device IDs Fixed trivial conflict in drivers/mtd/nand/gpmi-nand/gpmi-nand.c due to added include files next to each other. * tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd: (75 commits) mtd: mxc_nand: move ecc strengh setup before nand_scan_tail mtd: block2mtd: fix recursive call of mtd_writev mtd: gpmi-nand: define ecc.strength mtd: of_parts: fix breakage in Kconfig mtd: nand: fix scan_read_raw_oob mtd: docg3 fix in-middle of blocks reads mtd: cfi_cmdset_0002: Slight cleanup of fixup messages mtd: add fixup for S29NS512P NOR flash. jffs2: allow to complete xattr integrity check on first GC scan jffs2: allow to discriminate between recoverable and non-recoverable errors mtd: nand: omap: add support for hardware BCH ecc ARM: OMAP3: gpmc: add BCH ecc api and modes mtd: nand: check the return code of 'read_oob/read_oob_raw' mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw' mtd: m25p80: Add support for Winbond W25Q80BW jffs2: get rid of jffs2_sync_super jffs2: remove unnecessary GC pass on sync jffs2: remove unnecessary GC pass on umount jffs2: remove lock_super mtd: gpmi: add gpmi support for mx6q ...
2012-05-15MIPS: Fix several implicit uses of export.h/module.hPaul Gortmaker1-0/+1
These will show up as a build failure once we clean up a misuse of module.h in the mips termios header. Uses export.h: (EXPORT_SYMBOL) arch/mips/cavium-octeon/setup.c arch/mips/pmc-sierra/yosemite/setup.c arch/mips/rb532/devices.c arch/mips/sni/setup.c Uses module.h: (symbol_get/put) arch/mips/alchemy/devboards/db1200.c Uses module.h: (print_modules) arch/mips/kernel/traps.c Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3448/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-05-13mips: Use the plat_nand default partition parserH Hartley Sweeten3-9/+0
Use the default partition parser, cmdlinepart, provided by the plat_nand driver. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-11Merge branch 'next/alchemy' into mips-for-linux-nextRalf Baechle27-1788/+2473
2011-12-08MIPS: Alchemy: db1200: Improve PB1200 detection.Manuel Lauss1-8/+22
The PB1200 has the CPLD located at an address which on the DB1200 is RAM; reading the Board-ID sometimes results in a PB1200 being detected instead (especially during reboots after long uptimes). On the other hand, the address of the DB1200's CPLD is hosting Flash chips on the PB1200. Test for the DB1200 first and additionally do a quick write-test to the hexleds register to make sure we're writing to the CPLD. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3005/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-08MIPS: Alchemy: Touchscreen support on DB1100Manuel Lauss1-0/+56
Wire up the ADS7846 touchscreen controller on the DB1100. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2879/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-08MIPS: Alchemy: Hook up IrDA on DB1000/DB1100Manuel Lauss1-17/+57
Add necessary transceiver control platform data and hook up the IrDA peripheral on the DB1000 and DB1100 boards. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2878/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-08MTD: nand: make au1550nd.c a platform_driverManuel Lauss1-0/+66
Transform the au1550nd.c driver into a platform_driver and hook it up in the PB1550 board (gen_nand works fine on the DB1550, but since I don't have a PB1550 to test this driver stays for now). Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-mtd@lists.infradead.org To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2875/ Patchwork: https://patchwork.linux-mips.org/patch/3160/ Acked-by: Artem Bityutskiy <dedekind1@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: irq: Remove IRQF_DISABLEDYong Zhang1-2/+2
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. [ralf@linux-mips.org: Fixed up conflicts in arch/mips/alchemy/common/dbdma.c, arch/mips/cavium-octeon/smp.c and arch/mips/kernel/perf_event.c.] Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> To: linux-kernel@vger.kernel.org Cc: tglx@linutronix.de linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2835/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: Add RTC device to all devboardsManuel Lauss4-26/+11
All Devboards can use the 32kHz counter as a RTC device. Also delete the custom CMOS RTC header, which can be used for the DS1693 on the PB1500. But since it doesn't have a buffer battery it is as useful as the on-chip RTC which I prefer. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2874/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: MMC for DB1100Manuel Lauss1-0/+202
This patch hooks up the 2 MMC sockets on the DB1100 board. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2873/ Patchwork: https://patchwork.linux-mips.org/patch/2920/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: one kernel for DB1000/DB1500/DB1100Manuel Lauss3-67/+76
These 3 boards are very similar; with this patch a single kernel image which runs on all three can be built. Tested on DB1500 and DB1100. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2872/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: Merge PB1200 support into DB1200 code.Manuel Lauss3-490/+227
The PB1200 is basically a DB1200 with additional MMC and camera sockets and different base addresses for external hardware (CPLD, IDE, Net, NAND). This patch implements the missing PB1200 features in DB1200 support code and runtime board detection. Tested on DB1200 only. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2880/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: move au1200fb global functions to platform dataManuel Lauss3-69/+89
au1200fb calls 3 functions which have to be defined in board code. Fix this ugliness with the introduction of platform_data. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-fbdev@vger.kernel.org To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2871/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: merge devboard code into single per-board files.Manuel Lauss19-748/+464
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2884/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: Improved DB1550 support, with audio and serial busses.Manuel Lauss4-74/+519
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2868/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: Basic support for the DB1300 board.Manuel Lauss3-0/+792
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2867/ Patchwork: https://patchwork.linux-mips.org/patch/2919/ Patchwork: https://patchwork.linux-mips.org/patch/2928/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: devboards: remove unneeded BCSR IRQ reg accManuel Lauss1-9/+2
Initially I had to write to both the MASK and ENABLE registers, otherwise the CPLD would generate tons of spurious interrupts. With the change to the demux handler to disable the muxed line, it is now sufficient to disable the interrupt by writing either the enable or mask register. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2865/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: Drop MIRAGE/BOSPORUS board supportManuel Lauss4-175/+3
No test hardware and no (apparent) users. These boards seem very similar to the DB1500, so if required support can be brought back again (I have datasheets) but then with dedicated board code, not tacked on to DB1000 support. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2864/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: remove PB1000 supportManuel Lauss4-219/+1
Noone seems to have test hardware or care anymore. Drop PB1000 support and along with it the old Alchemy PCMCIA socket driver. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Cc: netdev@vger.kernel.org Cc: linux-pcmcia@lists.infradead.org Patchwork: https://patchwork.linux-mips.org/patch/2881/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-03Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds9-197/+650
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits) MIPS: O32: Provide definition of registers ta0 .. ta3. MIPS: perf: Add Octeon support for hardware perf. MIPS: perf: Add support for 64-bit perf counters. MIPS: perf: Reorganize contents of perf support files. MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c MIPS: Add accessor macros for 64-bit performance counter registers. MIPS: Add probes for more Octeon II CPUs. MIPS: Add more CPU identifiers for Octeon II CPUs. MIPS: XLR, XLS: Add comment for smp setup MIPS: JZ4740: GPIO: Check correct IRQ in demux handler MIPS: JZ4740: GPIO: Simplify IRQ demuxer MIPS: JZ4740: Use generic irq chip MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines MIPS: Alchemy: kill au1xxx.h header MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep MIPS: Alchemy: Redo PCI as platform driver MIPS: Alchemy: more base address cleanup MIPS: Alchemy: rewrite USB platform setup. MIPS: Alchemy: abstract USB block control register access ... Fix up trivial conflicts in: arch/mips/alchemy/devboards/db1x00/platform.c drivers/ide/Kconfig drivers/mmc/host/au1xmmc.c drivers/video/Kconfig sound/mips/Kconfig
2011-10-28Merge branch 'for-linus' of ↵Linus Torvalds2-0/+64
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (549 commits) ALSA: hda - Fix ADC input-amp handling for Cx20549 codec ALSA: hda - Keep EAPD turned on for old Conexant chips ALSA: hda/realtek - Fix missing volume controls with ALC260 ASoC: wm8940: Properly set codec->dapm.bias_level ALSA: hda - Fix pin-config for ASUS W90V ALSA: hda - Fix surround/CLFE headphone and speaker pins order ALSA: hda - Fix typo ALSA: Update the sound git tree URL ALSA: HDA: Add new revision for ALC662 ASoC: max98095: Convert codec->hw_write to snd_soc_write ASoC: keep pointer to resource so it can be freed ASoC: sgtl5000: Fix wrong mask in some snd_soc_update_bits calls ASoC: wm8996: Fix wrong mask for setting WM8996_AIF_CLOCKING_2 ASoC: da7210: Add support for line out and DAC ASoC: da7210: Add support for DAPM ALSA: hda/realtek - Fix DAC assignments of multiple speakers ASoC: Use SGTL5000_LINREG_VDDD_MASK instead of hardcoded mask value ASoC: Set sgtl5000->ldo in ldo_regulator_register ASoC: wm8996: Use SND_SOC_DAPM_AIF_OUT for AIF2 Capture ASoC: wm8994: Use SND_SOC_DAPM_AIF_OUT for AIF3 Capture ...
2011-10-24MIPS: Alchemy: remove all CONFIG_SOC_AU1??? definesManuel Lauss7-12/+302
Now that no driver any longer depends on the CONFIG_SOC_AU1??? symbols, it's time to get rid of them: Move some of the platform devices to the boards which can use them, Rename a few (unused) constants in the header, Replace them with MIPS_ALCHEMY in the various Kconfig files. Finally delete them altogether from the Alchemy Kconfig file. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2707/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: kill au1xxx.h headerManuel Lauss2-2/+3
No longer required Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2705/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/include/asm/mach-au1x00/au1xxx.h
2011-10-24MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? definesManuel Lauss2-12/+12
This patch gets rid of all CONFIG_SOC_AU1XXX defines in DMA/DBDMA-related code. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2704/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header depManuel Lauss2-2/+13
au1xxx-ide uses defines from the pb1200/db1200 headers: get DBDMA ID through platform resource information, hardcode register spacing. The only 2 users of this driver (and the only boards it can really work on realiably) use the same register layout. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-ide@vger.kernel.org To: Linux-MIPS <linux-mips@linux-mips.org> Cc: linux-ide@vger.kernel.org Acked-by: David S. Miller <davem@davemloft.net> Patchwork: https://patchwork.linux-mips.org/patch/2716/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: Redo PCI as platform driverManuel Lauss6-54/+228
- Rewrite Alchemy PCI support as a platform driver. - Fixup boards which have PCI. Run-tested on DB1500 and DB1550. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2706/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/alchemy/common/pci.c delete mode 100644 arch/mips/pci/fixup-au1000.c delete mode 100644 arch/mips/pci/ops-au1000.c create mode 100644 arch/mips/pci/pci-alchemy.c
2011-10-24MIPS: Alchemy: more base address cleanupManuel Lauss6-119/+97
remove all redundant peripheral base address defines, fix all affected boards and drivers. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2700/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-09-21MIPS: Alchemy: DB1200: Disable cascade IRQ in handlerManuel Lauss2-7/+4
Disable the cascade IRQ in the cascade handler. This is required to get the DB1300 working, and also gets rid of all spurious interrupts previously observed on the DB1200; so Config[OD] can be disabled again for better performance. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2708/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-27ASoC: au1x: update db1200 machine to the new way of thingsManuel Lauss1-0/+10
The use of the "soc-audio" platform device is no longer en vogue, update the code to the newer, simpler way of doing things. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-27ASoC: au1x: remove automatic DMA device registration from PSC driversManuel Lauss1-0/+6
The PSC audio drivers (psc-ac97/psc-i2s) register the DMA platform_device on their own. This is frowned upon, from now on board code must register a simple pcm dma platform device for each PSC with sound duties. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-27ASoC: Add a DB1x00 AC97 machine driverManuel Lauss1-0/+48
Add a machine driver suitable for the AC97 part on the DB1000/DB1500/DB1100 boards. Run-tested on DB1500. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-19MIPS: Alchemy: Clean up GPIO registers and accessorsManuel Lauss2-2/+2
remove au_readl/au_writel, remove the predefined GPIO1/2 KSEG1 register addresses and fix the fallout in all boards and drivers. This also fixes a bug in the mtx-1_wdt driver which was introduced by commit 6ea8115bb6f359df4f45152f2b40e1d4d1891392 ("Convert mtx1 wdt to be a platform device and use generic GPIO API") before this patch mtx-1_wdt only modified GPIO215, the patch then used the gpio resource information as bit index into the GPIO2 register but the conversion to the GPIO API didn't realize that. With this patch the drivers original behaviour is restored and GPIO15 is left alone. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Florian Fainelli <florian@openwrt.org> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: linux-watchdog@vger.kernel.org Cc: Wim Van Sebroeck <wim@iguana.be> Patchwork: https://patchwork.linux-mips.org/patch/2381/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2011-05-19MIPS: Alchemy: Rewrite UART setup and constants.Manuel Lauss1-1/+1
Detect CPU type at runtime and setup uarts accordingly; also clean up the uart base address mess in the process as far as possible. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: Florian Fainelli <florian@openwrt.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Patchwork: https://patchwork.linux-mips.org/patch/2352/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2011-05-19MIPS: DB1200: Set Config[OD] for improved stability.Manuel Lauss1-0/+7
Setting Config[OD] gets rid of a _LOT_ of spurious CPLD interrupts, but also decreases overall performance a bit. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: Florian Fainelli <florian@openwrt.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Patchwork: https://patchwork.linux-mips.org/patch/2347/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: Alchemy: Fix GCC 4.6.0 build error.Ralf Baechle1-28/+33
CC arch/mips/alchemy/devboards/db1x00/board_setup.o arch/mips/alchemy/devboards/db1x00/board_setup.c: In function 'board_setup': arch/mips/alchemy/devboards/db1x00/board_setup.c:130:6: error: variable 'pin_func' set but not used [-Werror=unused-but-set-variable] Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-29MIPS: Convert the irq functions to the new namesThomas Gleixner8-46/+46
Scripted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29MIPS: alchemy: Use proper irq accessorsThomas Gleixner1-7/+6
This really starts to be a sysiphean task. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-25MIPS: Alchemy: Convert to new irq chip functionsThomas Gleixner1-9/+9
Fix the deadlock in set_type() while at it: The code called set_irq_chip_and_handler_name() resp. set_irq_chip() from the set_type() callback. That only works on UP and lock debugging disabled. Otherwise it would dead lock on desc->lock. __irq_set_chip_handler_name_locked() avoids that. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2173/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-22Merge branch 'master' into for-nextJiri Kosina1-3/+2
Conflicts: MAINTAINERS arch/arm/mach-omap2/pm24xx.c drivers/scsi/bfa/bfa_fcpim.c Needed to update to apply fixes for which the old branch was too outdated.
2010-12-16MIPS: Alchemy: Add return value check for strict_strtoul()Yoichi Yuasa1-3/+2
arch/mips/alchemy/devboards/prom.c: In function 'prom_init': arch/mips/alchemy/devboards/prom.c:60: error: ignoring return value of 'strict_strtoul', declared with attribute warn_unused_result Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/1761/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-11-16suspend: constify platform_suspend_opsLionel Debroux1-1/+1
While at it, fix two checkpatch errors. Several non-const struct instances constified by this patch were added after the introduction of platform_suspend_ops in checkpatch.pl's list of "should be const" structs (79404849e90a41ea2109bd0e2f7c7164b0c4ce73). Patch against mainline. Inspired by hunks of the grsecurity patch, updated for newer kernels. Signed-off-by: Lionel Debroux <lionel_debroux@yahoo.fr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>