aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mm/cache-xsc3l2.c
AgeCommit message (Collapse)AuthorFilesLines
2012-03-28ARM: move CP15 definitions to separate header fileRussell King1-1/+1
Avoid namespace conflicts with drivers over the CP15 definitions by moving CP15 related prototypes and definitions to a private header file. Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> [Tegra] Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> [EP93xx] Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David Howells <dhowells@redhat.com>
2010-12-19ARM: fix cache-xsc3l2 after stack based kmap_atomic()Nicolas Pitre1-36/+21
Since commit 3e4d3af501 "mm: stack based kmap_atomic()", it is actively wrong to rely on fixed kmap type indices (namely KM_L2_CACHE) as kmap_atomic() totally ignores them and a concurrent instance of it may happily reuse any slot for any purpose. Because kmap_atomic() is now able to deal with reentrancy, we can get rid of the ad hoc mapping here, and we even don't have to disable IRQs anymore (highmem case). While the code is made much simpler, there is a needless cache flush introduced by the usage of __kunmap_atomic(). It is not clear if the performance difference to remove that is worth the cost in code maintenance (I don't think there are that many highmem users on that platform if at all anyway). Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2010-01-01[ARM] pxa: do not enable L2 after MMU is enabledHaojian Zhuang1-6/+5
Outer cache checked whether L2 is enabled or not. If L2 isn't enabled in XSC3, it would enable L2. This operation is evil that would make system hang. In XSC3 core document, these words are mentioned in below. "Following reset, the L2 Unified Cache Enable bit is cleared. To enable the L2 Cache, software may set the bit to a '1' before or at the same time as enabling the MMU. Enabling the L2 Cache after the MMU has been enabled or disabling the L2 Cache after the L2 Cache has been enabled, may result in unpredictable behavior of the processor." When outer cache is initialized, the MMU is already enabled. We couldn't enable L2 after MMU enabled. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-03-15[ARM] xsc3: add highmem support to L2 cache handling codeNicolas Pitre1-27/+80
On xsc3, L2 cache ops are possible only on virtual addresses. The code is rearranged so to have a linear progression requiring the least amount of pte setups in the highmem case. To protect the virtual mapping so created, interrupts must be disabled currently up to a page worth of address range. The interrupt disabling is done in a way to minimize the overhead within the inner loop. The alternative would consist in separate code for the highmem and non highmem compilation which is less preferable. Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-11-06[ARM] xsc3: fix xsc3_l2_inv_rangeDan Williams1-2/+2
When 'start' and 'end' are less than a cacheline apart and 'start' is unaligned we are done after cleaning and invalidating the first cacheline. So check for (start < end) which will not walk off into invalid address ranges when (start > end). This issue was caught by drivers/dma/dmatest. 2.6.27 is susceptible. Cc: <stable@kernel.org> Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Cc: Lennert Buytenhek <buytenh@marvell.com> Cc: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-09-01[ARM] cputype: separate definitions, use themRussell King1-1/+2
Add asm/cputype.h, moving functions and definitions from asm/system.h there. Convert all users of 'processor_id' to the more efficient read_cpuid_id() function. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-28[ARM] pxa: add support for L2 outer cache on XScale3 (attempt 2)Eric Miao1-0/+182
(20072fd0c93349e19527dd2fa9588b4335960e62 lost most of its changes somehow, came from a mbox archive applied with git-am. No idea what happened. This puts back the missing bits. --rmk) The initial patch from Lothar, and Lennert make it into a cleaner one, modified and tested on PXA320 by Eric Miao. This patch moves the L2 cache operations out of proc-xsc3.S into dedicated outer cache support code. CACHE_XSC3L2 can be deselected so no L2 cache specific code will be linked in, and that L2 enable bit will not be set, this applies to the following cases: a. _only_ PXA300/PXA310 support included and no L2 cache wanted b. PXA320 support included, but want L2 be disabled So the enabling of L2 depends on two things: - CACHE_XSC3L2 is selected - and L2 cache is present Where the latter is only a safeguard (previous testing shows it works OK even when this bit is turned on). IXP series of processors with XScale3 cannot disable L2 cache for the moment since they depend on the L2 cache for its coherent memory, so IXP may always select CACHE_XSC3L2. Other L2 relevant bits are always turned on (i.e. the original code enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side effects. Specifically, these bits are: - OC bits in TTBASE register (table walk outer cache attributes) - LLR Outer Cache Attributes (OC) in Auxiliary Control Register Signed-off-by: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>