aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-davinci
AgeCommit message (Collapse)AuthorFilesLines
2013-01-03ARM: drivers: remove __dev* attributes.Greg Kroah-Hartman2-3/+3
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-20Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-0/+1
Pull ARM SoC fixes from Olof Johansson: "This is a batch of fixes for arm-soc platforms, most of it is for OMAP but there are others too (i.MX, Tegra, ep93xx). Fixes warnings, some broken platforms and drivers, etc. A bit all over the map really." There was some concern about commit 68136b10 ("RM: sunxi: Change device tree naming scheme for sunxi"), but Tony says: "Looks like that's trivial to fix as needed, no need to rebuild the branch to fix that AFAIK. The fix can be done once Olof is available online again. Linus, I suggest that you go ahead and pull this if there are no other issues with this branch." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits) ARM: sunxi: Change device tree naming scheme for sunxi ARM: ux500: fix missing include ARM: u300: delete custom pin hog code ARM: davinci: fix build break due to missing include ARM: exynos: Fix warning due to missing 'inline' in stub ARM: imx: Move platform-mx2-emma to arch/arm/mach-imx/devices ARM i.MX51 clock: Fix regression since enabling MIPI/HSP clocks ARM: dts: mx27: Fix the AIPI bus for FEC ARM: OMAP2+: common: remove use of vram ARM: OMAP3/4: cpuidle: fix sparse and checkpatch warnings ARM: OMAP4: clock data: DPLLs are missing bypass clocks in their parent lists ARM: OMAP4: clock data: div_iva_hs_clk is a power-of-two divider ARM: OMAP4: Fix EMU clock domain always on ARM: OMAP4460: Workaround ABE DPLL failing to turn-on ARM: OMAP4: Enhance support for DPLLs with 4X multiplier ARM: OMAP4: Add function table for non-M4X dplls ARM: OMAP4: Update timer clock aliases ARM: OMAP: Move plat/omap-serial.h to include/linux/platform_data/serial-omap.h ARM: dts: Add build target for omap4-panda-a4 ARM: dts: OMAP2420: Correct H4 board memory size ...
2012-12-17ARM: davinci: remove rtc kicker releaseAfzal Mohammed1-12/+1
rtc-omap driver is now capable of handling kicker mechanism, hence remove kicker handling at platform level, instead provide proper device name so that driver can handle kicker mechanism by itself Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17ARM: davinci: fix build break due to missing includeOlof Johansson1-0/+1
arch/arm/mach-davinci/board-da850-evm.c: In function 'da850_evm_init': arch/arm/mach-davinci/board-da850-evm.c:1516:2: error: implicit declaration of function 'sram_get_gen_pool' [-Werror=implicit-function-declaration] arch/arm/mach-davinci/board-da850-evm.c:1516:31: warning: assignment makes pointer from integer without a cast [enabled by default] Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2012-12-15Merge tag 'fbdev-for-3.8' of git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds4-23/+4
Pull fbdev changes from Tomi Valkeinen: "OMAPDSS changes, including: - use dynanic debug prints - OMAP platform dependency removals - Creation of compat-layer, helping us to improve omapdrm - Misc cleanups, aiming to make omadss more in line with the upcoming common display framework Exynos DP changes for the 3.8 merge window: - Device Tree support for Samsung Exynos DP - SW Link training is cleaned up. - HPD interrupt is supported. Samsung Framebuffer changes for the 3.8 merge window: - The bit definitions of header file are updated. - Some minor typos are fixed. - Some minor bugs of s3c_fb_check_var() are fixed. FB related changes for SH Mobile, Freescale DIU Add support for the Solomon SSD1307 OLED Controller" * tag 'fbdev-for-3.8' of git://gitorious.org/linux-omap-dss2/linux: (191 commits) OMAPDSS: fix TV-out issue with DSI PLL Revert "OMAPFB: simplify locking" OMAPFB: remove silly loop in fb2display() OMAPFB: fix error handling in omapfb_find_best_mode() OMAPFB: use devm_kzalloc to allocate omapfb2_device OMAPDSS: DISPC: remove dispc fck uses OMAPDSS: DISPC: get dss clock rate from dss driver drivers/video/console/softcursor.c: remove redundant NULL check before kfree() drivers/video: add support for the Solomon SSD1307 OLED Controller OMAPDSS: use omapdss_compat_init() in other drivers OMAPDSS: export dispc functions OMAPDSS: export dss_feat functions OMAPDSS: export dss_mgr_ops functions OMAPDSS: separate compat files in the Makefile OMAPDSS: move display sysfs init to compat layer OMAPDSS: DPI: use dispc's check_timings OMAPDSS: DISPC: add dispc_ovl_check() OMAPDSS: move irq handling to dispc-compat OMAPDSS: move omap_dispc_wait_for_irq_interruptible_timeout to dispc-compat.c OMAPDSS: move blocking mgr enable/disable to compat layer ... Conflicts: arch/arm/mach-davinci/devices-da8xx.c arch/arm/plat-omap/common.c drivers/media/platform/omap/omap_vout.c
2012-12-13Merge tag 'sound-3.8' of ↵Linus Torvalds1-10/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This update contains a fairly wide range of changes all over in sound subdirectory, mainly because of UAPI header moves by David and __dev* annotation removals by Bill. Other highlights are: - Introduced the support for wallclock timestamps in ALSA PCM core - Add the poll loop implementation for HD-audio jack detection - Yet more VGA-switcheroo fixes for HD-audio - New VIA HD-audio codec support - More fixes on resource management in USB audio and MIDI drivers - More quirks for USB-audio ASUS Xonar U3, Reloop Play, Focusrite, Roland VG-99, etc - Add support for FastTrack C400 usb-audio - Clean ups in many drivers regarding firmware loading - Add PSC724 Ultiimate Edge support to ice1712 - A few hdspm driver updates - New Stanton SCS.1d/1m FireWire driver - Standardisation of the logging in ASoC codes - DT and dmaengine support for ASoC Atmel - Support for Wolfson ADSP cores - New drivers for Freescale/iVeia P1022 and Maxim MAX98090 - Lots of other ASoC driver fixes and developments" Fix up trivial conflicts. And go out on a limb and assume the dts file 'status' field of one of the conflicting things was supposed to be "disabled", not "disable" like in pretty much all other cases. * tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (341 commits) ALSA: hda - Move runtime PM check to runtime_idle callback ALSA: hda - Add stereo-dmic fixup for Acer Aspire One 522 ALSA: hda - Avoid doubly suspend after vga switcheroo ALSA: usb-audio: Enable S/PDIF on the ASUS Xonar U3 ALSA: hda - Check validity of CORB/RIRB WP reads ALSA: hda - use usleep_range in link reset and change timeout check ALSA: HDA: VIA: Add support for codec VT1808. ALSA: HDA: VIA Add support for codec VT1705CF. ASoC: codecs: remove __dev* attributes ASoC: utils: remove __dev* attributes ASoC: ux500: remove __dev* attributes ASoC: txx9: remove __dev* attributes ASoC: tegra: remove __dev* attributes ASoC: spear: remove __dev* attributes ASoC: sh: remove __dev* attributes ASoC: s6000: remove __dev* attributes ASoC: OMAP: remove __dev* attributes ASoC: nuc900: remove __dev* attributes ASoC: mxs: remove __dev* attributes ASoC: kirkwood: remove __dev* attributes ...
2012-12-13Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-2/+0
Pull ARM SoC device tree conversions and enablement from Olof Johansson: "Continued device tree conversion and enablement across a number of platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other smaller series as well. ux500 has seen continued conversion for platforms. Several platforms have seen pinctrl-via-devicetree conversions for simpler multiplatform. Tegra is adding data for new devices/drivers, and Exynos has a bunch of new bindings and devices added as well. So, pretty much the same progression in the right direction as the last few releases." Fix up conflicts as per Olof. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (185 commits) ARM: ux500: Rename dbx500 cpufreq code to be more generic ARM: dts: add missing ux500 device trees ARM: ux500: Stop registering the PCM driver from platform code ARM: ux500: Move board specific GPIO info out to subordinate DTS files ARM: ux500: Disable the MMCI gpio-regulator by default ARM: Kirkwood: remove kirkwood_ehci_init() from new boards ARM: Kirkwood: Add support LED of OpenBlocks A6 ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6 ARM: kirkwood: Add NAND partiton map for OpenBlocks A6 ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6 ARM: kirkwood: Add support DT of second I2C bus ARM: kirkwood: Convert mplcec4 board to pinctrl ARM: Kirkwood: Convert km_kirkwood to pinctrl ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl ARM: Kirkwood: Convert IX2-200 to pinctrl. ARM: Kirkwood: Convert lsxl boards to pinctrl. ARM: Kirkwood: Convert ib62x0 to pinctrl. ARM: Kirkwood: Convert GoFlex Net to pinctrl. ARM: Kirkwood: Convert dreamplug to pinctrl. ARM: Kirkwood: Convert dockstar to pinctrl. ...
2012-12-12Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds5-14/+97
Pull ARM SoC board updates from Olof Johansson: "This branch contains a set of various board updates for ARM platforms. A few shmobile platforms that are stale have been removed, some defconfig updates for various boards selecting new features such as pinctrl subsystem support, and various updates enabling peripherals, etc." Fix up conflicts mostly as per Olof. * tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (58 commits) ARM: S3C64XX: Add dummy supplies for Glenfarclas LDOs ARM: S3C64XX: Add registration of WM2200 Bells device on Cragganmore ARM: kirkwood: Add Plat'Home OpenBlocks A6 support ARM: Dove: update defconfig ARM: Kirkwood: update defconfig for new boards arm: orion5x: add DT related options in defconfig arm: orion5x: convert 'LaCie Ethernet Disk mini v2' to Device Tree arm: orion5x: basic Device Tree support arm: orion5x: mechanical defconfig update ARM: kirkwood: Add support for the MPL CEC4 arm: kirkwood: add support for ZyXEL NSA310 ARM: Kirkwood: new board USI Topkick ARM: kirkwood: use gpio-fan DT binding on lsxl ARM: Kirkwood: add Netspace boards to defconfig ARM: kirkwood: DT board setup for Network Space Mini v2 ARM: kirkwood: DT board setup for Network Space Lite v2 ARM: kirkwood: DT board setup for Network Space v2 and parents leds: leds-ns2: add device tree binding ARM: Kirkwood: Enable the second I2C bus ARM: mmp: select pinctrl driver ...
2012-12-12Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds18-60/+145
Pull ARM SoC updates from Olof Johansson: "This contains the bulk of new SoC development for this merge window. Two new platforms have been added, the sunxi platforms (Allwinner A1x SoCs) by Maxime Ripard, and a generic Broadcom platform for a new series of ARMv7 platforms from them, where the hope is that we can keep the platform code generic enough to have them all share one mach directory. The new Broadcom platform is contributed by Christian Daudt. Highbank has grown support for Calxeda's next generation of hardware, ECX-2000. clps711x has seen a lot of cleanup from Alexander Shiyan, and he's also taken on maintainership of the platform. Beyond this there has been a bunch of work from a number of people on converting more platforms to IRQ domains, pinctrl conversion, cleanup and general feature enablement across most of the active platforms." Fix up trivial conflicts as per Olof. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (174 commits) mfd: vexpress-sysreg: Remove LEDs code irqchip: irq-sunxi: Add terminating entry for sunxi_irq_dt_ids clocksource: sunxi_timer: Add terminating entry for sunxi_timer_dt_ids irq: versatile: delete dangling variable ARM: sunxi: add missing include for mdelay() ARM: EXYNOS: Avoid early use of of_machine_is_compatible() ARM: dts: add node for PL330 MDMA1 controller for exynos4 ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412 ARM: EXYNOS: add UART3 to DEBUG_LL ports ARM: S3C24XX: Add clkdev entry for camif-upll clock ARM: SAMSUNG: Add s3c24xx/s3c64xx CAMIF GPIO setup helpers ARM: sunxi: Add missing sun4i.dtsi file pinctrl: samsung: Do not initialise statics to 0 ARM i.MX6: remove gate_mask from pllv3 ARM i.MX6: Fix ethernet PLL clocks ARM i.MX6: rename PLLs according to datasheet ARM i.MX6: Add pwm support ARM i.MX51: Add pwm support ARM i.MX53: Add pwm support ARM: mx5: Replace clk_register_clkdev with clock DT lookup ...
2012-12-12Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds3-9/+1
Pull ARM SoC cleanups on various subarchitectures from Olof Johansson: "Cleanup patches for various ARM platforms and some of their associated drivers. There's also a branch in here that enables Freescale i.MX to be part of the multiplatform support -- the first "big" SoC that is moved over (more multiplatform work comes in a separate branch later during the merge window)." Conflicts fixed as per Olof, including a silent semantic one in arch/arm/mach-omap2/board-generic.c (omap_prcm_restart() was renamed to omap3xxx_restart(), and a new user of the old name was added). * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (189 commits) ARM: omap: fix typo on timer cleanup ARM: EXYNOS: Remove unused regs-mem.h file ARM: EXYNOS: Remove unused non-dt support for dwmci controller ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan ARM: OMAP3: cm-t3517: use GPTIMER for system clock ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER ARM: SAMSUNG: use devm_ functions for ADC driver ARM: EXYNOS: no duplicate mask/unmask in eint0_15 ARM: S3C24XX: SPI clock channel setup is fixed for S3C2443 ARM: EXYNOS: Remove i2c0 resource information and setting of device names ARM: Kirkwood: checkpatch cleanups ARM: Kirkwood: Fix sparse warnings. ARM: Kirkwood: Remove unused includes ARM: kirkwood: cleanup lsxl board includes ARM: integrator: use BUG_ON where possible ARM: integrator: push down SC dependencies ARM: integrator: delete static UART1 mapping ARM: integrator: delete SC mapping on the CP ARM: integrator: remove static CP syscon mapping ARM: integrator: remove static AP syscon mapping ...
2012-12-12Merge tag 'fixes-non-critical' of ↵Linus Torvalds4-4/+11
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC Non-critical bug fixes from Olof Johansson: "Simple bug fixes that were not considered important enough for inclusion into 3.7, especially those that arrived late during the merge window. There's also a MAINTAINERS update for the Renesas platforms in here, marking Simon Horman as a maintainer and changing the git url to his tree." * tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: Update ARM/SHMOBILE section of MAINTAINERS ARM: Fix Kconfig symbols typo for LEDS ARM: pxa: add dummy SA1100 rtc clock in pxa25x ARM: pxa: fix pxa25x gpio wakeup setting ARM: OMAP4: PM: fix errata handling when CONFIG_PM=n ARM: cns3xxx: drop unnecessary symbol selection ARM: vexpress: fix ll debug code when building multiplatform ARM: OMAP4: retrigger localtimers after re-enabling gic ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX GIC control register change. ARM: OMAP4: PM: add errata support ARM: davinci: fix return value check by using IS_ERR in tnetv107x_devices_init() ARM: davinci: uncompress.h: bail out if uart not initialized ARM: davinci: serial.h: fix uart number in the comment ARM: davinci: dm644x evm: move pointer dereference below NULL check ARM: vexpress: Make the debug UART detection more specific
2012-12-02Merge remote-tracking branch 'asoc/topic/davinci' into asoc-nextMark Brown1-10/+14
2012-11-27video: da8xx-fb: clk_get on connection id fckManjunathappa3-2/+3
do clk_get on connection id "fck" to support OMAP based platforms having multiple clocks for module. Without this driver change clk_get fails on am335x. This patch is based on the discussion in community http://marc.info/?l=linux-kernel&m=135166018907827&w=2 Signed-off-by: Manjunathappa <prakash.pm@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27da8xx-fb: cleanup LCDC configurationsManjunathappa, Prakash1-21/+1
Configure below LCDC configurations to optimal values, also have an option configure these optional parameters for platform. 1) AC bias configuration: Required only for passive panels 2) Dma_burst_size: 3) FIFO_DMA_DELAY: 4) FIFO threshold: Does not apply for da830 LCDC. Patch is verified for 16bpp and 24bpp configurations on da830, da850 and am335x EVMs. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-25Merge tag 'v3.7-rc7' into next/cleanupOlof Johansson1-2/+1
Merging in mainline back to next/cleanup since it has collected a few conflicts between fixes going upstream and some of the cleanup patches. Git doesn't auto-resolve some of them, and they're mostly noise so let's take care of it locally. Conflicts are in: arch/arm/mach-omap2/omap_hwmod_44xx_data.c arch/arm/plat-omap/i2c.c drivers/video/omap2/dss/dss.c Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-19Merge tag 'davinci-for-v3.8/defconfig' of ↵Olof Johansson4-0/+77
git://gitorious.org/linux-davinci/linux-davinci into next/boards From Sekhar Nori: This change enables DT related options in DA8XX defconfig. * tag 'davinci-for-v3.8/defconfig' of git://gitorious.org/linux-davinci/linux-davinci: ARM: davinci: da8xx defconfig: enable DT config options Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-19ARM: davinci: move dtb targets to common locationOlof Johansson1-2/+0
The dtb targets belong in arch/arm/boot/dts/Makefile now, so move the newly added davinci targets there. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-19ARM: davinci: dm644x: fix out range signal for EDLad, Prabhakar1-2/+1
Fix the video clock setting when custom timings are used with pclock <= 27MHz. Existing video clock selection uses PLL2 mode which results in a 54MHz clock whereas using the MXI mode results in a 27MHz clock (which is the one actually desired). This bug affects the Enhanced Definition (ED) support on DM644x. Without this patch, out-range signals errors are were observed on the TV when viewing ED. An out-of-range signal is often caused when the field rate is above the rate that the television will handle. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> [nsekhar@ti.com: reword commit message based on on-list discussion] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-11-13Merge branch 'cleanups/dma' into next/cleanupArnd Bergmann1-2/+0
Separate patches from Marek Szyprowski <m.szyprowski@samsung.com>: Commit e9da6e9905e639b0 ("ARM: dma-mapping: remove custom consistent dma region") replaced custom consistent memory handling, so setting consistent dma memory size is not longer required. This patch series cleans sub-architecture platform code to remove all calls to the obsolated init_consistent_dma_size() function and finally removes the init_consistent_dma_size() stub itself. * cleanups/dma: ARM: at91: remove obsoleted init_consistent_dma_size() ARM: u300: remove obsoleted init_consistent_dma_size() ARM: dma-mapping: remove init_consistent_dma_size() stub ARM: shmobile: remove obsoleted init_consistent_dma_size() ARM: davinci: remove obsoleted init_consistent_dma_size() ARM: samsung: remove obsoleted init_consistent_dma_size() Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-13ARM: davinci: remove obsoleted init_consistent_dma_size()Marek Szyprowski1-2/+0
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> CC: Sekhar Nori <nsekhar@ti.com> CC: Kevin Hilman <khilman@ti.com>
2012-10-30ARM: davinci: fix return value check by using IS_ERR in tnetv107x_devices_init()Wei Yongjun1-1/+1
In case of error, the function clk_get() returns ERR_PTR() not NULL pointer. The NULL test in the error handling should be replaced with IS_ERR(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-29ARM: davinci: da850: generate dtbs for da850 boardsSekhar Nori1-0/+2
This helps generating device tree blobs for DaVinci DA850 boards with command: 'make ARCH=arm dtbs'. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-29ARM: davinci: add support for am1808 based EnBW CMC boardHeiko Schocher1-0/+1
This board supports: - AM1808 based board - 64 MiB DDR ram - 2 MiB Nor flash - 128 MiB NAND flash - use internal RTC - I2C support - hwmon lm75 support - UBI/UBIFS support - MMC support - USB OTG support This patch adds the basic DTS file enabling the serial ports. Other features will be added in due course of time. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree-discuss@lists.ozlabs.org Cc: davinci-linux-open-source@linux.davincidsp.com Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Wolfgang Denk <wd@denx.de> [nsekhar@ti.com: modified after dtsi refactoring and added binding documentation] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-29ARM: davinci: da850 evm: add DT dataSekhar Nori1-0/+1
Add device tree data for DA850 EVM. At this time, only information on serial ports is added. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-29ARM: davinci: da850: add DT boot supportSekhar Nori3-0/+73
Add support for booting DA850 using flattened device tree to describe the hardware. At this time only the very basic bootup using a serial console is supported. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-29ARM: davinci: da850 evm: register uio_pruss deviceMatt Porter1-0/+6
Registers the uio_pruss platform device on the DA850 EVM. Tested on AM180x-EVM using the PRU_memAccessPRUDataRam and PRU_memAccessL3andDDR examples from the PRU userspace tools available from http://www.ti.com/tool/sprc940 Signed-off-by: Matt Porter <mporter@ti.com> [nsekhar@ti.com: use pr_warn() instead of pr_warning()] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-29ARM: davinci: da850 evm: clean up include orderingMatt Porter1-14/+14
Reorder includes so they are grouped by linux/mach/asm Signed-off-by: Matt Porter <mporter@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-27ARM: davinci: uncompress.h: bail out if uart not initializedSekhar Nori1-0/+6
Bail out of UART access functions in uncompress.h if the uart port is not setup. This will happen when booting from DT since machine type matching does not work in this case. This may also happen if a correct machine type is not setup by bootloader. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-27ARM: davinci: serial.h: fix uart number in the commentHenrique Camargo1-1/+1
The bit 0 of the field is uart0 and the bit 1 is uart1 and so on. Signed-off-by: Henrique Camargo <henrique@henriquecamargo.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-27ARM: davinci: dm644x evm: move pointer dereference below NULL checkWei Yongjun1-2/+3
Pointer dereference should be moved below the NULL test. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-27ARM: davinci: da8xx: add DA850 PRUSS supportMatt Porter3-0/+80
Adds PRUSS clock support and registration helper for the uio_pruss device. Signed-off-by: Matt Porter <mporter@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-27ARM: davinci: add platform hook to fetch the SRAM poolMatt Porter2-0/+8
Adds sram_get_gen_pool() which allows platform code to get the machine's SRAM gen_pool. The gen_pool may be passed in platform data for driver genalloc use. Signed-off-by: Matt Porter <mporter@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-27ARM: davinci: da850: changed SRAM allocator to shared ram.Subhasish Ghosh2-2/+3
This patch modifies the sram allocator to allocate memory from the DA8XX shared RAM. Regression tested suspend/resume on AM180x EVM. Signed-off-by: Subhasish Ghosh <subhasish@mistralsolutions.com> [rebased onto consolidated SRAM patches] Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> [rebased to mainline as consolidated SRAM patches were dropped] Signed-off-by: Matt Porter <mporter@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-27ARM: davinci: sram: switch from iotable to ioremapped regionsBen Gardiner7-35/+15
The current davinci init sets up SRAM in iotables. There has been an observed failure to boot a da850 with 128K specified in the iotable. Make the davinci sram allocator do an ioremap of the region specified by the entries in davinci_soc_info before registering with gen_pool_add_virt(). Remove all iotable SRAM mappings and SRAM_VIRT. Regression tested suspend/resume on AM180x EVM. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Signed-off-by: Matt Porter <mporter@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-27ARM: davinci: serial: provide API to initialze UART clocksSekhar Nori2-12/+28
Provide an API to initialize a UART clock. Refactor existing davinci_serial_init() to separate out the part which enables the clock. This will later be used to help DA850 DT boot support. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-26ARM: davinci: board-dm646x-evm.c: Remove unecessary semicolonPeter Senna Tschudin1-1/+1
Found by http://coccinelle.lip6.fr/ Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-24ARM: davinci: convert platform code to use clk_prepare/clk_unpreparem-karicheri2@ti.com8-12/+12
As a first step towards migrating davinci platforms to use common clock framework, replace all instances of clk_enable() with clk_prepare_enable() and clk_disable() with clk_disable_unprepare(). Until the platform is switched to use the CONFIG_HAVE_CLK_PREPARE Kconfig variable, this just adds a might_sleep() call and would work without any issues. This will make it easy later to switch to common clk based implementation of clk driver from DaVinci specific driver. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Reviewed-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-24ARM: davinci: usb: remove CONFIG_USB_MUSB_HOST etcConstantine Shulyupin1-6/+0
Remove usage of CONFIG_USB_MUSB_OTG, CONFIG_USB_MUSB_PERIPHERAL and CONFIG_USB_MUSB_HOST in arch/arm/mach-davinci/usb.c since these are not used anymore and set mode configuration by default to MUSB_OTG. Signed-off-by: Constantine Shulyupin <const@MakeLinux.com> [prakash.pm@ti.com: Tested on DM6446-EVM] Acked-by: Manjunathappa, Prakash <prakash.pm@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-22ARM: davinci: enable SRAM ping ping buffering on DA850Matt Porter1-10/+14
Passes the DA850 shared SRAM gen_pool to the McASP driver and enables the ping-pong buffer DMA support. Signed-off-by: Matt Porter <mporter@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-13ARM: config: sort select statements alphanumericallyRussell King1-8/+8
As suggested by Andrew Morton: This is a pet peeve of mine. Any time there's a long list of items (header file inclusions, kconfig entries, array initalisers, etc) and someone wants to add a new item, they *always* go and stick it at the end of the list. Guys, don't do this. Either put the new item into a randomly-chosen position or, probably better, alphanumerically sort the list. lets sort all our select statements alphanumerically. This commit was created by the following perl: while (<>) { while (/\\\s*$/) { $_ .= <>; } undef %selects if /^\s*config\s+/; if (/^\s+select\s+(\w+).*/) { if (defined($selects{$1})) { if ($selects{$1} eq $_) { print STDERR "Warning: removing duplicated $1 entry\n"; } else { print STDERR "Error: $1 differently selected\n". "\tOld: $selects{$1}\n". "\tNew: $_\n"; exit 1; } } $selects{$1} = $_; next; } if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or /^endif/ or /^endchoice/)) { foreach $k (sort (keys %selects)) { print "$selects{$k}"; } undef %selects; } print; } if (%selects) { foreach $k (sort (keys %selects)) { print "$selects{$k}"; } } It found two duplicates: Warning: removing duplicated S5P_SETUP_MIPIPHY entry Warning: removing duplicated HARDIRQS_SW_RESEND entry and they are identical duplicates, hence the shrinkage in the diffstat of two lines. We have four testers reporting success of this change (Tony, Stephen, Linus and Sekhar.) Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-12Merge branch 'v4l_for_linus' of ↵Linus Torvalds9-44/+460
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull second set of media updates from Mauro Carvalho Chehab: "Despite its size, most of the stuff here is trivial. This series contains: - s5p-mfc: additions at the driver and at the core to support H.264 hardware codec; - Some improvements at s5p and davinci embedded drivers; - Some V4L2 compliance fixes applied on a few drivers; - Several random trivial patches, including several fixes and a few new board support additions; Notes: 1) Some Exynos media patches were dependent on some -arm fixes that got merged on changeset 782cd9e. That's why this pull request is based that changeset. 2) As promised, I reviewed the pending VB2 DMABUF series. While setting a test environment, it was noticed that the upstream support for Samsung Exynos 4 boards (smdk310 and Origen) are broken upstream, likely due to regressions: both defconfigs are wrong and regulator settings for both boards are broken. That, allied with some bug at the dummy regulator driver, causes OOPSes during boot time. Long story short: even fixing the above, the proposed patches OOPSed when running the DMABUF test. Not sure yet if the OOPSes are due to some other undetected regressions, or due to some bug on the patches. Due to the above, DMABUF patches for vb2 got NACKed for 3.7." * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (109 commits) [media] m5mols: Add missing #include <linux/sizes.h> [media] stk1160: Add support for S-Video input Revert "[media] omap3isp: Replace cpu_is_omap3630() with ISP revision check" [media] dvb: LNA implementation changes [media] v4l2-ioctl: fix W=1 warnings [media] v4l2-ioctl: add blocks check for VIDIOC_SUBDEV_G/S_EDID [media] omap3isp: Fix compilation error in ispreg.h [media] rc-msi-digivox-ii: Add full scan keycodes [media] cx25821: testing the wrong variable [media] tda18271-common: hold the I2C adapter during write transfers [media] ds3000: add module parameter to force firmware upload [media] drivers/media: Remove unnecessary semicolon [media] winbond: remove space from driver name [media] iguanair: cannot send data from the stack [media] omap3isp: Replace cpu_is_omap3630() with ISP revision check [media] dvb-usb: print small buffers via %*ph [media] uvc: Add return code check at vb2_queue_init() [media] em28xx: Replace memcpy with struct assignment [media] bt8xx: Add video4linux control V4L2_CID_COLOR_KILLER [media] mem2mem_testdev: Use devm_kzalloc() in probe ... Conflicts: arch/arm/mach-davinci/include/mach/da8xx.h
2012-10-11Merge branch 'staging/for_v3.7' into v4l_for_linusMauro Carvalho Chehab9-44/+460
Applied on the top of changeset 782cd9e, as some of those patches depend on some fixes that went via -arm tree. * staging/for_v3.7: (109 commits) [media] m5mols: Add missing #include <linux/sizes.h> [media] stk1160: Add support for S-Video input Revert "[media] omap3isp: Replace cpu_is_omap3630() with ISP revision check" [media] dvb: LNA implementation changes [media] v4l2-ioctl: fix W=1 warnings [media] v4l2-ioctl: add blocks check for VIDIOC_SUBDEV_G/S_EDID [media] omap3isp: Fix compilation error in ispreg.h [media] rc-msi-digivox-ii: Add full scan keycodes [media] cx25821: testing the wrong variable [media] tda18271-common: hold the I2C adapter during write transfers [media] ds3000: add module parameter to force firmware upload [media] drivers/media: Remove unnecessary semicolon [media] winbond: remove space from driver name [media] iguanair: cannot send data from the stack [media] omap3isp: Replace cpu_is_omap3630() with ISP revision check [media] dvb-usb: print small buffers via %*ph [media] uvc: Add return code check at vb2_queue_init() [media] em28xx: Replace memcpy with struct assignment [media] bt8xx: Add video4linux control V4L2_CID_COLOR_KILLER [media] mem2mem_testdev: Use devm_kzalloc() in probe ...
2012-10-11Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-1/+1
Pull ARM SoC fixes from Olof Johansson: "A series of fixes (and in some cases, some cleanups): Via Tony Lindgren: - A collection of OMAP regression fixes, in particular because firmware no longer sets up all pin states before starting the kernel. - cpufreq fixes for OMAP (Rafael is on vacation and this was pre-agreed). - A longer series of misc regression fixes and cleanups, warning removals, etc for OMAP From Arnd Bergmann: - A series of warning fixes for various platforms (defconfig builds) Misc: - A couple of tegra fixes, one for i.MX, some vt8500 fixes, etc." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits) ARM: pxa: armcore: fix PCI PIO warnings ARM: integrator: use __iomem pointers for MMIO, part 2 ARM: assabet: fix bogus warning in get_assabet_scr (again) ARM: shmobile: mark shmobile_init_late as __init ARM: integrator_cp: fix build failure ARM: OMAP4/AM335x: hwmod: fix disable_module regression in hardreset handling ARM: OMAP3: fix workaround for EMU clockdomain arm/omap: Replace board_ref_clock with enum values ARM: OMAP2+: remove duplicated include from board-omap3stalker.c arch/arm/plat-omap/omap-pm-noop.c: Remove unecessary semicolon arch/arm/mach-omap2: Remove unecessary semicolon arch/arm/mach-omap1/devices.c: Remove unecessary semicolon ARM/dts: omap5-evm: pinmux configuration for audio ARM/dts: Add pinctrl driver entries for omap5 ARM/dts: omap4-panda: pinmux configuration for audio ARM/dts: omap4-sdp: pinmux configuration for audio ARM/dts: omap5-evm: Disable unused McBSP3 ARM/dts: omap4-sdp: Disable unused McBSP3 ARM/dts: omap4-panda: Disable unused audio IPs ARM: OMAP: board-omap4panda: Pin mux configuration for audio needs ...
2012-10-09Merge tag 'sound-3.7' of ↵Linus Torvalds10-162/+57
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This contains pretty many small commits covering fairly large range of files in sound/ directory. Partly because of additional API support and partly because of constantly developed ASoC and ARM stuff. Some highlights: - Introduced the helper function and documentation for exposing the channel map via control API, as discussed in Plumbers; most of PCI drivers are covered, will follow more drivers later - Most of drivers have been replaced with the new PM callbacks (if the bus is supported) - HD-audio controller got the support of runtime PM and the support of D3 clock-stop. Also changing the power_save option in sysfs kicks off immediately to enable / disable the power-save mode. - Another significant code change in HD-audio is the rewrite of firmware loading code. Other than that, most of changes in HD-audio are continued cleanups and standardization for the generic auto parser and bug fixes (HBR, device-specific fixups), in addition to the support of channel-map API. - Addition of ASoC bindings for the compressed API, used by the mid-x86 drivers. - Lots of cleanups and API refreshes for ASoC codec drivers and DaVinci. - Conversion of OMAP to dmaengine. - New machine driver for Wolfson Microelectronics Bells. - New CODEC driver for Wolfson Microelectronics WM0010. - Enhancements to the ux500 and wm2000 drivers - A new driver for DA9055 and the support for regulator bypass mode." Fix up various arm soc header file reorg conflicts. * tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (339 commits) ALSA: hda - Add new codec ALC283 ALC290 support ALSA: hda - avoid unneccesary indices on "Headphone Jack" controls ALSA: hda - fix indices on boost volume on Conexant ALSA: aloop - add locking to timer access ALSA: hda - Fix hang caused by race during suspend. sound: Remove unnecessary semicolon ALSA: hda/realtek - Fix detection of ALC271X codec ALSA: hda - Add inverted internal mic quirk for Lenovo IdeaPad U310 ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event ALSA: hda - make a generic unsol event handler ASoC: codecs: Add DA9055 codec driver ASoC: eukrea-tlv320: Convert it to platform driver ALSA: ASoC: add DT bindings for CS4271 ASoC: wm_hubs: Ensure volume updates are handled during class W startup ASoC: wm5110: Adding missing volume update bits ASoC: wm5110: Add OUT3R support ASoC: wm5110: Add AEC loopback support ASoC: wm5110: Rename EPOUT to HPOUT3 ASoC: arizona: Add more clock rates ASoC: arizona: Add more DSP options for mixer input muxes ...
2012-10-07Merge branch 'late/fixes' into fixesOlof Johansson1-1/+1
This is a series from Arnd that fixes a number of compiler warnings when building defconfigs on ARM. * late/fixes: ARM: footbridge: nw_gpio_lock is raw_spin_lock ARM: mv78xx0: correct addr_map_cfg __initdata annotation ARM: footbridge: remove RTC_IRQ definition ARM: soc: dependency warnings for errata ARM: ks8695: __arch_virt_to_dma type handling ARM: rpc: check device_register return code in ecard_probe ARM: davinci: don't mark da850_register_cpufreq as __init ARM: iop13xx: fix iq81340sc_atux_map_irq prototype ARM: iop13xx: mark iop13xx_scan_bus as __devinit ARM: mv78xx0: mark mv78xx0_timer_init as __init_refok ARM: s3c24xx: fix multiple section mismatch warnings ARM: at91: unused variable in at91_pm_verify_clocks ARM: at91: skip at91_io_desc definition for NOMMU ARM: pxa: work around duplicate definition of GPIO24_SSP1_SFRM ARM: pxa: remove sharpsl_fatal_check function ARM: pxa: define palmte2_pxa_keys conditionally ARM: pxa: Wunused-result warning in viper board file ARM: shark: fix shark_pci_init return code Fixed trivial conflicts in arch/arm/mach-at91/setup.c. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-10-07ARM: davinci: don't mark da850_register_cpufreq as __initArnd Bergmann1-1/+1
The mityomapl138_cpufreq_init and read_factory_config function in board-mityomapl138.c are not __init functions and might be called at a later stage, so da850_register_cpufreq must not be __init either. Without this patch, building da8xx_omapl_defconfig results in: WARNING: arch/arm/mach-davinci/built-in.o(.text+0x2eb4): Section mismatch in reference from the function read_factory_config() to the function .init.text:da850_register_cpufreq() The function read_factory_config() references the function __init da850_register_cpufreq(). This is often because read_factory_config lacks a __init annotation or the annotation of da850_register_cpufreq is wrong. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2012-10-05Merge branch 'samsung_platform_data' into staging/for_v3.7Mauro Carvalho Chehab25-430/+49
* samsung_platform_data: ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: nomadik: move platform_data definitions ARM: w90x900: move platform_data definitions ARM: vt8500: move platform_data definitions ARM: tegra: move sdhci platform_data definition ARM: sa1100: move platform_data definitions ARM: pxa: move platform_data definitions ARM: netx: move platform_data definitions ARM: msm: move platform_data definitions ARM: imx: move platform_data definitions ARM: ep93xx: move platform_data definitions ARM: davinci: move platform_data definitions ARM: at91: move platform_data definitions
2012-10-05[media] media: davinci: vpif: display: separate out subdev from outputLad, Prabhakar2-11/+66
vpif_display relied on a 1-1 mapping of output and subdev. This is not necessarily the case. Separate the two. So there is a list of subdevs and a list of outputs. Each output refers to a subdev and has routing information. An output does not have to have a subdev. The initial output for each channel is set to the fist output. Currently missing is support for associating multiple subdevs with an output. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] davinci: move struct vpif_interface to chan_cfgHans Verkuil2-24/+24
struct vpif_interface is channel specific, not subdev specific. Move it to the channel config. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com> Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] vpif_capture: move routing info from subdev to inputHans Verkuil2-8/+12
Routing information is a property of the input, not of the subdev. One subdev may provide multiple inputs, each with its own routing information. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com> Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>