aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation
AgeCommit message (Collapse)AuthorFilesLines
2013-01-08Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds5-21/+17
Pull ARM SoC fixes from Olof Johansson: "People are back from the holiday breaks, and it shows. Here are a bunch of fixes for a number of platforms: - A couple of small fixes for Nomadik - A larger set of changes for kirkwood/mvebu - uart driver selection, dt clocks, gpio-poweroff fixups, a few __init annotation fixes and some error handling improvement in their xor dma driver. - i.MX had a couple of minor fixes (and a critical one for flexcan2 clock setup) - MXS has a small board fix and a framebuffer bugfix - A set of fixes for Samsung Exynos, fixing default bootargs and some Exynos5440 clock issues - A set of OMAP changes including PM fixes and a few sparse warning fixups All in all a bit more positive code delta than we'd ideally want to see here, mostly from the OMAP PM changes, but nothing overly crazy." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits) ARM: clps711x: Fix bad merge of clockevents setup ARM: highbank: save and restore L2 cache and GIC on suspend ARM: highbank: add a power request clear ARM: highbank: fix secondary boot and hotplug ARM: highbank: fix typos with hignbank in power request functions ARM: dts: fix highbank cpu mpidr values ARM: dts: add device_type prop to cpu nodes on Calxeda platforms ARM: mx5: Fix MX53 flexcan2 clock ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array pinctrl: mvebu: make pdma clock on dove mandatory ARM: Dove: Add pinctrl clock to DT dma: mv_xor: fix error handling for clocks dma: mv_xor: fix error handling of mv_xor_channel_add() arm: mvebu: Add missing ; for cpu node. arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces arm: mvebu: Armada XP MV78230 has two cores, not one clk: mvebu: Remove inappropriate __init tagging ARM: Kirkwood: Use fixed-regulator instead of board gpio call ARM: Kirkwood: Fix missing sdio clock ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers ...
2013-01-08Merge tag 'imx-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson4-18/+0
into fixes From Shawn Guo: It includes one critical fix - wrong flexcan2 clock will hang system when the port gets brought up. The other two are non-critical fixes, which are sent together here, since it's still early -rc stage. * tag 'imx-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mx5: Fix MX53 flexcan2 clock ARM: dts: imx31-bug: Fix manufacturer compatible string clk: imx: Remove 'clock-output-names' from the examples
2013-01-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-5/+11
Pull networking fixes from David Miller: 1) New sysctl ndisc_notify needs some documentation, from Hanns Frederic Sowa. 2) Netfilter REJECT target doesn't set transport header of SKB correctly, from Mukund Jampala. 3) Forcedeth driver needs to check for DMA mapping failures, from Larry Finger. 4) brcmsmac driver can't use usleep_range while holding locks, use udelay instead. From Niels Ole Salscheider. 5) Fix unregister of netlink bridge multicast database handlers, from Vlad Yasevich and Rami Rosen. 6) Fix checksum calculations in netfilter's ipv6 network prefix translation module. 7) Fix high order page allocation failures in netfilter xt_recent, from Eric Dumazet. 8) mac802154 needs to use netif_rx_ni() instead of netif_rx() because mac802154_process_data() can execute in process rather than interrupt context. From Alexander Aring. 9) Fix splice handling of MSG_SENDPAGE_NOTLAST, otherwise we elide one tcp_push() too many. From Eric Dumazet and Willy Tarreau. 10) Fix skb->truesize tracking in XEN netfront driver, from Ian Campbell. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits) xen/netfront: improve truesize tracking ipv4: fix NULL checking in devinet_ioctl() tcp: fix MSG_SENDPAGE_NOTLAST logic net/ipv4/ipconfig: really display the BOOTP/DHCP server's address. ip-sysctl: fix spelling errors mac802154: fix NOHZ local_softirq_pending 08 warning ipv6: document ndisc_notify in networking/ip-sysctl.txt ath9k: Fix Kconfig for ATH9K_HTC netfilter: xt_recent: avoid high order page allocations netfilter: fix missing dependencies for the NOTRACK target netfilter: ip6t_NPT: fix IPv6 NTP checksum calculation bridge: add empty br_mdb_init() and br_mdb_uninit() definitions. vxlan: allow live mac address change bridge: Correctly unregister MDB rtnetlink handlers brcmfmac: fix parsing rsn ie for ap mode. brcmsmac: add copyright information for Canonical rtlwifi: rtl8723ae: Fix warning for unchecked pci_map_single() call rtlwifi: rtl8192se: Fix warning for unchecked pci_map_single() call rtlwifi: rtl8192de: Fix warning for unchecked pci_map_single() call rtlwifi: rtl8192ce: Fix warning for unchecked pci_map_single() call ...
2013-01-07Merge tag 'pm+acpi-for-3.8-rc3' of ↵Linus Torvalds1-4/+5
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: - Removal of some ACPICA code that the kernel will never use from Lv Zheng. - APEI fix from Adrian Huang. - Removal of unnecessary ACPI memory hotplug driver code from Liu Jinsong. - Minor ACPI power management fixes. - ACPI debug code fix from Joe Perches. - ACPI fix to make system bus device nodes get the right names. - PNP resources handling fixes from Witold Szczeponik. - cpuidle fix for a recent regression stalling boot on systems with great numbers of CPUs from Daniel Lezcano. - cpuidle fixes from Sivaram Nair. - intel_idle debug message fix from Youquan Song. - cpufreq build regression fix from Larry Finger. - cpufreq fix for an obscure initialization race related to statistics from Konstantin Khlebnikov. - cpufreq change disabling the Longhaul driver by default from Rafał Bilski. - PM core fix preventing device suspend errors from happening during system suspend due to obscure race conditions. - PM QoS local variable name cleanup. * tag 'pm+acpi-for-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: Move disabling/enabling runtime PM to late suspend/early resume PM / QoS: Rename local variable in dev_pm_qos_add_ancestor_request() ACPI / scan: Do not use dummy HID for system bus ACPI nodes cpufreq / governor: Fix problem with cpufreq_ondemand or cpufreq_conservative cpufreq / Longhaul: Disable driver by default cpufreq / stats: fix race between stats allocation and first usage cpuidle: fix lock contention in the idle path intel_idle: pr_debug information need separated cpuidle / coupled: fix ready counter decrement cpuidle: Fix finding state with min power_usage PNP: Handle IORESOURCE_BITS in resource allocation PNP: Simplify setting of resources ACPI / power: Remove useless message from device registering routine ACPI / glue: Update DBG macro to include KERN_DEBUG ACPI / PM: Do not apply ACPI_SUCCESS() to acpi_bus_get_device() result ACPI / memhotplug: remove redundant logic of acpi memory hotadd ACPI / APEI: Fix the returned value in erst_dbg_read ACPICA: Remove useless mini-C library.
2013-01-06Power: gpio-poweroff: Fix documentation and gpio_is_validAndrew Lunn1-3/+17
Improve the documentation to clarify level vs edge triggered power off. Improve the comments for level vs edge triggered power off. Make use of gpio_is_valid(). Reported-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06PM: Move disabling/enabling runtime PM to late suspend/early resumeRafael J. Wysocki1-4/+5
Currently, the PM core disables runtime PM for all devices right after executing subsystem/driver .suspend() callbacks for them and re-enables it right before executing subsystem/driver .resume() callbacks for them. This may lead to problems when there are two devices such that the .suspend() callback executed for one of them depends on runtime PM working for the other. In that case, if runtime PM has already been disabled for the second device, the first one's .suspend() won't work correctly (and analogously for resume). To make those issues go away, make the PM core disable runtime PM for devices right before executing subsystem/driver .suspend_late() callbacks for them and enable runtime PM for them right after executing subsystem/driver .resume_early() callbacks for them. This way the potential conflitcs between .suspend_late()/.resume_early() and their runtime PM counterparts are still prevented from happening, but the subtle ordering issues related to disabling/enabling runtime PM for devices during system suspend/resume are much easier to avoid. Reported-and-tested-by: Jan-Matthias Braun <jan_braun@gmx.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Cc: 3.4+ <stable@vger.kernel.org>
2013-01-04Documentation/sysctl/kernel.txt: document /proc/sys/shmallCarlos Alberto Lopez Perez1-0/+13
Signed-off-by: Carlos Alberto Lopez Perez <clopez@igalia.com> Cc: Rob Landley <rob@landley.net> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-04ipc: add sysctl to specify desired next object idStanislav Kinsbursky1-0/+19
Add 3 new variables and sysctls to tune them (by one "next_id" variable for messages, semaphores and shared memory respectively). This variable can be used to set desired id for next allocated IPC object. By default it's equal to -1 and old behaviour is preserved. If this variable is non-negative, then desired idr will be extracted from it and used as a start value to search for free IDR slot. Notes: 1) this patch doesn't guarantee that the new object will have desired id. So it's up to user space how to handle new object with wrong id. 2) After a sucessful id allocation attempt, "next_id" will be set back to -1 (if it was non-negative). [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-04ip-sysctl: fix spelling errorsstephen hemminger1-5/+5
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-04ipv6: document ndisc_notify in networking/ip-sysctl.txtHannes Frederic Sowa1-0/+6
I slipped in a new sysctl without proper documentation. I would like to make up for this now. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-04clk: imx: Remove 'clock-output-names' from the examplesFabio Estevam4-18/+0
'clock-output-names' is not used in any of the dts/dtsi files for i.mx. Remove it from the examples, so that the example and the real usage in the dtsi files can match. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-03Merge tag 'driver-core-3.8-rc2' of ↵Linus Torvalds9-36/+14
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core __dev* removal patches - take 3 - from Greg Kroah-Hartman: "Here are the remaining __dev* removal patches against the 3.8-rc2 tree. All of these patches were previously sent to the subsystem maintainers, most of them were picked up and pushed to you, but there were a number that fell through the cracks, and new drivers were added during the merge window, so this series cleans up the rest of the instances of these markings. Third time's the charm... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fixed up trivial conflict with the pinctrl pull in pinctrl-sirf.c. * tag 'driver-core-3.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits) misc: remove __dev* attributes. include: remove __dev* attributes. Documentation: remove __dev* attributes. Drivers: misc: remove __dev* attributes. Drivers: block: remove __dev* attributes. Drivers: bcma: remove __dev* attributes. Drivers: char: remove __dev* attributes. Drivers: clocksource: remove __dev* attributes. Drivers: ssb: remove __dev* attributes. Drivers: dma: remove __dev* attributes. Drivers: gpu: remove __dev* attributes. Drivers: infinband: remove __dev* attributes. Drivers: memory: remove __dev* attributes. Drivers: mmc: remove __dev* attributes. Drivers: iommu: remove __dev* attributes. Drivers: power: remove __dev* attributes. Drivers: message: remove __dev* attributes. Drivers: macintosh: remove __dev* attributes. Drivers: mfd: remove __dev* attributes. pstore: remove __dev* attributes. ...
2013-01-03Documentation: remove __dev* attributes.Greg Kroah-Hartman9-36/+14
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from the kernel documentation. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03Merge tag 'pinctrl-fixes' of ↵Linus Torvalds1-0/+47
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fixes from Linus Walleij: "A first round of pinctrl fixes for v3.8: - i.MX5 register configuration - Swap a kfree to devm_kfree() to avoid memory corruption in the at91 driver - Add the missing device tree binding doc for the SIRF pin controller - Enable the SIRF GPIO pull up/down configuration from the device tree, it was previously retired from the hard-coded approach. - NULL check for the prcm_base in the Nomadik pin controller. - Provide the prcm_base from the device tree in the DT boot path for the Nomadik pin controller." * tag 'pinctrl-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: ARM: ux500: add pinctrl address resources pinctrl: nomadik: return if prcm_base is NULL pinctrl: sirf: enable GPIO pullup/down configuration from dts pinctrl: sirf: add missing DT-binding document pinctrl: fix comment mistake drivers/pinctrl/pinctrl-at91.c: convert kfree to devm_kfree pinctrl: imx5: fix GPIO_8 pad CAN1_RXCAN configuration
2013-01-02watchdog: twl4030_wdt: add DT supportAaro Koskinen1-0/+10
Add DT support for twl4030_wdt. This is needed to get twl4030_wdt to probe when booting with DT. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-12-26pinctrl: sirf: enable GPIO pullup/down configuration from dtsBarry Song1-0/+3
commit 7bec207427c2efb794 remove sirfsoc_gpio_set_pull function, this patches takes the feature back by adding sirf,pullups and sirf,pulldowns prop in dts, and the driver will set the GPIO pull according to the dts. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-12-26pinctrl: sirf: add missing DT-binding documentBarry Song1-0/+44
While sending email to Linus for reviewing: "pinctrl: sirf: add DT-binding pinmux mapping support" https://patchwork.kernel.org/patch/1364361/ i have included the devicetree/bindings/pinctrl/pinctrl-sirf.txt But while sending pull request with commit 056876f6c73406c, i missed the document. this patch takes the document back. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-12-21Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds1-0/+12
Pull watchdog updates from Wim Van Sebroeck: "This includes some fixes and code improvements (like clk_prepare_enable and clk_disable_unprepare), conversion from the omap_wdt and twl4030_wdt drivers to the watchdog framework, addition of the SB8x0 chipset support and the DA9055 Watchdog driver and some OF support for the davinci_wdt driver." * git://www.linux-watchdog.org/linux-watchdog: (22 commits) watchdog: mei: avoid oops in watchdog unregister code path watchdog: Orion: Fix possible null-deference in orion_wdt_probe watchdog: sp5100_tco: Add SB8x0 chipset support watchdog: davinci_wdt: add OF support watchdog: da9052: Fix invalid free of devm_ allocated data watchdog: twl4030_wdt: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER watchdog: remove depends on CONFIG_EXPERIMENTAL watchdog: Convert dev_printk(KERN_<LEVEL> to dev_<level>( watchdog: DA9055 Watchdog driver watchdog: omap_wdt: eliminate goto watchdog: omap_wdt: delete redundant platform_set_drvdata() calls watchdog: omap_wdt: convert to devm_ functions watchdog: omap_wdt: convert to new watchdog core watchdog: WatchDog Timer Driver Core: fix comment watchdog: s3c2410_wdt: use clk_prepare_enable and clk_disable_unprepare watchdog: imx2_wdt: Select the driver via ARCH_MXC watchdog: cpu5wdt.c: add missing del_timer call watchdog: hpwdt.c: Increase version string watchdog: Convert twl4030_wdt to watchdog core davinci_wdt: preparation for switch to common clock framework ...
2012-12-20Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds2-13/+0
Merge the rest of Andrew's patches for -rc1: "A bunch of fixes and misc missed-out-on things. That'll do for -rc1. I still have a batch of IPC patches which still have a possible bug report which I'm chasing down." * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (25 commits) keys: use keyring_alloc() to create module signing keyring keys: fix unreachable code sendfile: allows bypassing of notifier events SGI-XP: handle non-fatal traps fat: fix incorrect function comment Documentation: ABI: remove testing/sysfs-devices-node proc: fix inconsistent lock state linux/kernel.h: fix DIV_ROUND_CLOSEST with unsigned divisors memcg: don't register hotcpu notifier from ->css_alloc() checkpatch: warn on uapi #includes that #include <uapi/... revert "rtc: recycle id when unloading a rtc driver" mm: clean up transparent hugepage sysfs error messages hfsplus: add error message for the case of failure of sync fs in delayed_sync_fs() method hfsplus: rework processing of hfs_btree_write() returned error hfsplus: rework processing errors in hfsplus_free_extents() hfsplus: avoid crash on failed block map free kcmp: include linux/ptrace.h drivers/rtc/rtc-imxdi.c: must include <linux/spinlock.h> mm: cma: WARN if freed memory is still in use exec: do not leave bprm->interp on stack ...
2012-12-20Merge branch 'for-linus' of ↵Linus Torvalds7-36/+92
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS update from Al Viro: "fscache fixes, ESTALE patchset, vmtruncate removal series, assorted misc stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (79 commits) vfs: make lremovexattr retry once on ESTALE error vfs: make removexattr retry once on ESTALE vfs: make llistxattr retry once on ESTALE error vfs: make listxattr retry once on ESTALE error vfs: make lgetxattr retry once on ESTALE vfs: make getxattr retry once on an ESTALE error vfs: allow lsetxattr() to retry once on ESTALE errors vfs: allow setxattr to retry once on ESTALE errors vfs: allow utimensat() calls to retry once on an ESTALE error vfs: fix user_statfs to retry once on ESTALE errors vfs: make fchownat retry once on ESTALE errors vfs: make fchmodat retry once on ESTALE errors vfs: have chroot retry once on ESTALE error vfs: have chdir retry lookup and call once on ESTALE error vfs: have faccessat retry once on an ESTALE error vfs: have do_sys_truncate retry once on an ESTALE error vfs: fix renameat to retry on ESTALE errors vfs: make do_unlinkat retry once on ESTALE errors vfs: make do_rmdir retry once on ESTALE errors vfs: add a flags argument to user_path_parent ...
2012-12-20Documentation: ABI: remove testing/sysfs-devices-nodeDavidlohr Bueso1-7/+0
This file is already documented in the stable ABI (see commit 5bbe1ec11fcf). Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: Greg KH <greg@kroah.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-20Documentation: kernel-parameters.txt remove capability.disableJosh Boyer1-6/+0
Remove the documentation for capability.disable. The code supporting this parameter was removed with commit 5915eb53861c ("security: remove dummy module") Signed-off-by: Josh Boyer <jwboyer@redhat.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Cc: Rob Landley <rob@landley.net> Cc: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-20Merge branch 'fscache' of ↵Al Viro5-18/+101
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into for-linus
2012-12-20documentation: drop vmtruncateMarco Stornelli3-18/+1
Removed vmtruncate Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-20Merge branch 'for-3.8' of git://linux-nfs.org/~bfields/linuxLinus Torvalds1-16/+4
Pull nfsd update from Bruce Fields: "Included this time: - more nfsd containerization work from Stanislav Kinsbursky: we're not quite there yet, but should be by 3.9. - NFSv4.1 progress: implementation of basic backchannel security negotiation and the mandatory BACKCHANNEL_CTL operation. See http://wiki.linux-nfs.org/wiki/index.php/Server_4.0_and_4.1_issues for remaining TODO's - Fixes for some bugs that could be triggered by unusual compounds. Our xdr code wasn't designed with v4 compounds in mind, and it shows. A more thorough rewrite is still a todo. - If you've ever seen "RPC: multiple fragments per record not supported" logged while using some sort of odd userland NFS client, that should now be fixed. - Further work from Jeff Layton on our mechanism for storing information about NFSv4 clients across reboots. - Further work from Bryan Schumaker on his fault-injection mechanism (which allows us to discard selective NFSv4 state, to excercise rarely-taken recovery code paths in the client.) - The usual mix of miscellaneous bugs and cleanup. Thanks to everyone who tested or contributed this cycle." * 'for-3.8' of git://linux-nfs.org/~bfields/linux: (111 commits) nfsd4: don't leave freed stateid hashed nfsd4: free_stateid can use the current stateid nfsd4: cleanup: replace rq_resused count by rq_next_page pointer nfsd: warn on odd reply state in nfsd_vfs_read nfsd4: fix oops on unusual readlike compound nfsd4: disable zero-copy on non-final read ops svcrpc: fix some printks NFSD: Correct the size calculation in fault_inject_write NFSD: Pass correct buffer size to rpc_ntop nfsd: pass proper net to nfsd_destroy() from NFSd kthreads nfsd: simplify service shutdown nfsd: replace boolean nfsd_up flag by users counter nfsd: simplify NFSv4 state init and shutdown nfsd: introduce helpers for generic resources init and shutdown nfsd: make NFSd service structure allocated per net nfsd: make NFSd service boot time per-net nfsd: per-net NFSd up flag introduced nfsd: move per-net startup code to separated function nfsd: pass net to __write_ports() and down nfsd: pass net to nfsd_set_nrthreads() ...
2012-12-20FS-Cache: Provide proper invalidationDavid Howells3-16/+65
Provide a proper invalidation method rather than relying on the netfs retiring the cookie it has and getting a new one. The problem with this is that isn't easy for the netfs to make sure that it has completed/cancelled all its outstanding storage and retrieval operations on the cookie it is retiring. Instead, have the cache provide an invalidation method that will cancel or wait for all currently outstanding operations before invalidating the cache, and will cause new operations to queue up behind that. Whilst invalidation is in progress, some requests will be rejected until the cache can stack a barrier on the operation queue to cause new operations to be deferred behind it. Signed-off-by: David Howells <dhowells@redhat.com>
2012-12-20Merge branch 'for-linus' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph update from Sage Weil: "There are a few different groups of commits here. The largest is Alex's ongoing work to enable the coming RBD features (cloning, striping). There is some cleanup in libceph that goes along with it. Cyril and David have fixed some problems with NFS reexport (leaking dentries and page locks), and there is a batch of patches from Yan fixing problems with the fs client when running against a clustered MDS. There are a few bug fixes mixed in for good measure, many of which will be going to the stable trees once they're upstream. My apologies for the late pull. There is still a gremlin in the rbd map/unmap code and I was hoping to include the fix for that as well, but we haven't been able to confirm the fix is correct yet; I'll send that in a separate pull once it's nailed down." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (68 commits) rbd: get rid of rbd_{get,put}_dev() libceph: register request before unregister linger libceph: don't use rb_init_node() in ceph_osdc_alloc_request() libceph: init event->node in ceph_osdc_create_event() libceph: init osd->o_node in create_osd() libceph: report connection fault with warning libceph: socket can close in any connection state rbd: don't use ENOTSUPP rbd: remove linger unconditionally rbd: get rid of RBD_MAX_SEG_NAME_LEN libceph: avoid using freed osd in __kick_osd_requests() ceph: don't reference req after put rbd: do not allow remove of mounted-on image libceph: Unlock unprocessed pages in start_read() error path ceph: call handle_cap_grant() for cap import message ceph: Fix __ceph_do_pending_vmtruncate ceph: Don't add dirty inode to dirty list if caps is in migration ceph: Fix infinite loop in __wake_requests ceph: Don't update i_max_size when handling non-auth cap bdi_register: add __printf verification, fix arg mismatch ...
2012-12-20FS-Cache: Fix operation state management and accountingDavid Howells2-2/+26
Fix the state management of internal fscache operations and the accounting of what operations are in what states. This is done by: (1) Give struct fscache_operation a enum variable that directly represents the state it's currently in, rather than spreading this knowledge over a bunch of flags, who's processing the operation at the moment and whether it is queued or not. This makes it easier to write assertions to check the state at various points and to prevent invalid state transitions. (2) Add an 'operation complete' state and supply a function to indicate the completion of an operation (fscache_op_complete()) and make things call it. The final call to fscache_put_operation() can then check that an op in the appropriate state (complete or cancelled). (3) Adjust the use of object->n_ops, ->n_in_progress, ->n_exclusive to better govern the state of an object: (a) The ->n_ops is now the number of extant operations on the object and is now decremented by fscache_put_operation() only. (b) The ->n_in_progress is simply the number of objects that have been taken off of the object's pending queue for the purposes of being run. This is decremented by fscache_op_complete() only. (c) The ->n_exclusive is the number of exclusive ops that have been submitted and queued or are in progress. It is decremented by fscache_op_complete() and by fscache_cancel_op(). fscache_put_operation() and fscache_operation_gc() now no longer try to clean up ->n_exclusive and ->n_in_progress. That was leading to double decrements against fscache_cancel_op(). fscache_cancel_op() now no longer decrements ->n_ops. That was leading to double decrements against fscache_put_operation(). fscache_submit_exclusive_op() now decides whether it has to queue an op based on ->n_in_progress being > 0 rather than ->n_ops > 0 as the latter will persist in being true even after all preceding operations have been cancelled or completed. Furthermore, if an object is active and there are runnable ops against it, there must be at least one op running. (4) Add a remaining-pages counter (n_pages) to struct fscache_retrieval and provide a function to record completion of the pages as they complete. When n_pages reaches 0, the operation is deemed to be complete and fscache_op_complete() is called. Add calls to fscache_retrieval_complete() anywhere we've finished with a page we've been given to read or allocate for. This includes places where we just return pages to the netfs for reading from the server and where accessing the cache fails and we discard the proposed netfs page. The bugs in the unfixed state management manifest themselves as oopses like the following where the operation completion gets out of sync with return of the cookie by the netfs. This is possible because the cache unlocks and returns all the netfs pages before recording its completion - which means that there's nothing to stop the netfs discarding them and returning the cookie. FS-Cache: Cookie 'NFS.fh' still has outstanding reads ------------[ cut here ]------------ kernel BUG at fs/fscache/cookie.c:519! invalid opcode: 0000 [#1] SMP CPU 1 Modules linked in: cachefiles nfs fscache auth_rpcgss nfs_acl lockd sunrpc Pid: 400, comm: kswapd0 Not tainted 3.1.0-rc7-fsdevel+ #1090 /DG965RY RIP: 0010:[<ffffffffa007050a>] [<ffffffffa007050a>] __fscache_relinquish_cookie+0x170/0x343 [fscache] RSP: 0018:ffff8800368cfb00 EFLAGS: 00010282 RAX: 000000000000003c RBX: ffff880023cc8790 RCX: 0000000000000000 RDX: 0000000000002f2e RSI: 0000000000000001 RDI: ffffffff813ab86c RBP: ffff8800368cfb50 R08: 0000000000000002 R09: 0000000000000000 R10: ffff88003a1b7890 R11: ffff88001df6e488 R12: ffff880023d8ed98 R13: ffff880023cc8798 R14: 0000000000000004 R15: ffff88003b8bf370 FS: 0000000000000000(0000) GS:ffff88003bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000008ba008 CR3: 0000000023d93000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kswapd0 (pid: 400, threadinfo ffff8800368ce000, task ffff88003b8bf040) Stack: ffff88003b8bf040 ffff88001df6e528 ffff88001df6e528 ffffffffa00b46b0 ffff88003b8bf040 ffff88001df6e488 ffff88001df6e620 ffffffffa00b46b0 ffff88001ebd04c8 0000000000000004 ffff8800368cfb70 ffffffffa00b2c91 Call Trace: [<ffffffffa00b2c91>] nfs_fscache_release_inode_cookie+0x3b/0x47 [nfs] [<ffffffffa008f25f>] nfs_clear_inode+0x3c/0x41 [nfs] [<ffffffffa0090df1>] nfs4_evict_inode+0x2f/0x33 [nfs] [<ffffffff810d8d47>] evict+0xa1/0x15c [<ffffffff810d8e2e>] dispose_list+0x2c/0x38 [<ffffffff810d9ebd>] prune_icache_sb+0x28c/0x29b [<ffffffff810c56b7>] prune_super+0xd5/0x140 [<ffffffff8109b615>] shrink_slab+0x102/0x1ab [<ffffffff8109d690>] balance_pgdat+0x2f2/0x595 [<ffffffff8103e009>] ? process_timeout+0xb/0xb [<ffffffff8109dba3>] kswapd+0x270/0x289 [<ffffffff8104c5ea>] ? __init_waitqueue_head+0x46/0x46 [<ffffffff8109d933>] ? balance_pgdat+0x595/0x595 [<ffffffff8104bf7a>] kthread+0x7f/0x87 [<ffffffff813ad6b4>] kernel_thread_helper+0x4/0x10 [<ffffffff81026b98>] ? finish_task_switch+0x45/0xc0 [<ffffffff813abcdd>] ? retint_restore_args+0xe/0xe [<ffffffff8104befb>] ? __init_kthread_worker+0x53/0x53 [<ffffffff813ad6b0>] ? gs_change+0xb/0xb Signed-off-by: David Howells <dhowells@redhat.com>
2012-12-20Merge tag 'for-3.8-merge' of ↵Linus Torvalds2-0/+423
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull new F2FS filesystem from Jaegeuk Kim: "Introduce a new file system, Flash-Friendly File System (F2FS), to Linux 3.8. Highlights: - Add initial f2fs source codes - Fix an endian conversion bug - Fix build failures on random configs - Fix the power-off-recovery routine - Minor cleanup, coding style, and typos patches" From the Kconfig help text: F2FS is based on Log-structured File System (LFS), which supports versatile "flash-friendly" features. The design has been focused on addressing the fundamental issues in LFS, which are snowball effect of wandering tree and high cleaning overhead. Since flash-based storages show different characteristics according to the internal geometry or flash memory management schemes aka FTL, F2FS and tools support various parameters not only for configuring on-disk layout, but also for selecting allocation and cleaning algorithms. and there's an article by Neil Brown about it on lwn.net: http://lwn.net/Articles/518988/ * tag 'for-3.8-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (36 commits) f2fs: fix tracking parent inode number f2fs: cleanup the f2fs_bio_alloc routine f2fs: introduce accessor to retrieve number of dentry slots f2fs: remove redundant call to f2fs_put_page in delete entry f2fs: make use of GFP_F2FS_ZERO for setting gfp_mask f2fs: rewrite f2fs_bio_alloc to make it simpler f2fs: fix a typo in f2fs documentation f2fs: remove unused variable f2fs: move error condition for mkdir at proper place f2fs: remove unneeded initialization f2fs: check read only condition before beginning write out f2fs: remove unneeded memset from init_once f2fs: show error in case of invalid mount arguments f2fs: fix the compiler warning for uninitialized use of variable f2fs: resolve build failures f2fs: adjust kernel coding style f2fs: fix endian conversion bugs reported by sparse f2fs: remove unneeded version.h header file from f2fs.h f2fs: update the f2fs document f2fs: update Kconfig and Makefile ...
2012-12-20Merge tag 'iommu-updates-v3.8' of ↵Linus Torvalds2-0/+138
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: "A few new features this merge-window. The most important one is probably, that dma-debug now warns if a dma-handle is not checked with dma_mapping_error by the device driver. This requires minor changes to some architectures which make use of dma-debug. Most of these changes have the respective Acks by the Arch-Maintainers. Besides that there are updates to the AMD IOMMU driver for refactor the IOMMU-Groups support and to make sure it does not trigger a hardware erratum. The OMAP changes (for which I pulled in a branch from Tony Lindgren's tree) have a conflict in linux-next with the arm-soc tree. The conflict is in the file arch/arm/mach-omap2/clock44xx_data.c which is deleted in the arm-soc tree. It is safe to delete the file too so solve the conflict. Similar changes are done in the arm-soc tree in the common clock framework migration. A missing hunk from the patch in the IOMMU tree will be submitted as a seperate patch when the merge-window is closed." * tag 'iommu-updates-v3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (29 commits) ARM: dma-mapping: support debug_dma_mapping_error ARM: OMAP4: hwmod data: ipu and dsp to use parent clocks instead of leaf clocks iommu/omap: Adapt to runtime pm iommu/omap: Migrate to hwmod framework iommu/omap: Keep mmu enabled when requested iommu/omap: Remove redundant clock handling on ISR iommu/amd: Remove obsolete comment iommu/amd: Don't use 512GB pages iommu/tegra: smmu: Move bus_set_iommu after probe for multi arch iommu/tegra: gart: Move bus_set_iommu after probe for multi arch iommu/tegra: smmu: Remove unnecessary PTC/TLB flush all tile: dma_debug: add debug_dma_mapping_error support sh: dma_debug: add debug_dma_mapping_error support powerpc: dma_debug: add debug_dma_mapping_error support mips: dma_debug: add debug_dma_mapping_error support microblaze: dma-mapping: support debug_dma_mapping_error ia64: dma_debug: add debug_dma_mapping_error support c6x: dma_debug: add debug_dma_mapping_error support ARM64: dma_debug: add debug_dma_mapping_error support intel-iommu: Prevent devices with RMRRs from being placed into SI Domain ...
2012-12-20Merge branch 'hwmon-for-linus' of ↵Linus Torvalds1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull hwmon subsystem update from Jean Delvare: "There are many improvements to the it87 driver, as well as suspend support for the Winbond Super-I/O chips, and a few other fixes." * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon-vid: Add support for AMD family 11h to 15h processors hwmon: (it87) Support PECI for additional chips hwmon: (it87) Report thermal sensor type as Intel PECI if appropriate hwmon: (it87) Manage device specific features with table hwmon: (it87) Replace pwm group macro with direct attribute definitions hwmon: (it87) Avoid quoted string splits across lines hwmon: (it87) Save fan registers in 2-dimensional array hwmon: (it87) Introduce support for tempX_offset sysfs attribute hwmon: (it87) Replace macro defining tempX_type sensors with direct definitions hwmon: (it87) Save voltage register values in 2-dimensional array hwmon: (it87) Save temperature registers in 2-dimensional array hwmon: (w83627ehf) Get rid of smatch warnings hwmon: (w83627hf) Don't touch nonexistent I2C address registers hwmon: (w83627ehf) Add support for suspend hwmon: (w83627hf) Add support for suspend hwmon: Fix PCI device reference leak in quirk
2012-12-19Merge tags 'dt-for-linus', 'gpio-for-linus' and 'spi-for-linus' of ↵Linus Torvalds3-2/+28
git://git.secretlab.ca/git/linux-2.6 Pull devicetree, gpio and spi bugfixes from Grant Likely: "Device tree v3.8 bug fix: - Fixes an undefined struct device build error and a missing symbol export. GPIO device driver bug fixes: - gpio/mvebu-gpio: Make mvebu-gpio depend on OF_CONFIG - gpio/ich: Add missing spinlock init SPI device driver bug fixes: - Most of this is bug fixes to the core code and the sh-hspi and s3c64xx device drivers. - There is also a patch here to add DT support to the Atmel driver. This one should have been in the first round, but I missed it. It's a low risk change contained within a single driver and the Atmel maintainer has requested it." * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux-2.6: of: define struct device in of_platform.h if !OF_DEVICE and !OF_ADDRESS of: Fix export of of_find_matching_node_and_match() * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: gpio/mvebu-gpio: Make mvebu-gpio depend on OF_CONFIG gpio/ich: Add missing spinlock init * tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6: spi/sh-hspi: fix return value check in hspi_probe(). spi: fix tegra SPI binding examples spi/atmel: add DT support of/spi: Fix SPI module loading by using proper "spi:" modalias prefixes. spi: Change FIFO flush operation and spi channel off spi: Keep chipselect assertion during one message
2012-12-19watchdog: davinci_wdt: add OF supportMurali Karicheri1-0/+12
This adds OF support for davinci_wdt driver. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-12-19hwmon: (it87) Report thermal sensor type as Intel PECI if appropriateGuenter Roeck1-1/+2
IT8721 and IT8728 support Intel PECI temperature reporting. Each sensor can be programmed to display the temperature reported on the PECI interface. If configured for Intel PECI, the driver reported the wrong sensor type for the respective thermal sensor. Fix the code to correctly report it as "Intel PECI (6)". Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-12-19hwmon: (it87) Introduce support for tempX_offset sysfs attributeGuenter Roeck1-0/+9
Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-12-19Merge tag 'xtensa-20121218' of git://github.com/czankel/xtensa-linuxLinus Torvalds1-0/+44
Pull Xtensa patchset from Chris Zankel: "This contains support of device trees, many fixes, and code clean-ups" * tag 'xtensa-20121218' of git://github.com/czankel/xtensa-linux: (33 commits) xtensa: don't try to build DTB when OF is disabled xtensa: set the correct ethernet address for xtfpga xtensa: clean up files to make them code-style compliant xtensa: provide endianness macro for sparse xtensa: fix RASID SR initialization xtensa: initialize CPENABLE SR when core has one xtensa: reset all timers on initialization Use for_each_compatible_node() macro. xtensa: add XTFPGA DTS xtensa: add support for the XTFPGA boards xtensa: add device trees support xtensa: add IRQ domains support xtensa: add U-Boot image support (uImage). xtensa: clean up boot make rules xtensa: fix mb and wmb definitions xtensa: add s32c1i-based spinlock implementations xtensa: add s32c1i-based bitops implementations xtensa: add s32c1i-based atomic ops implementations xtensa: add s32c1i sanity check xtensa: add trap_set_handler function ...
2012-12-19Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull small x86 fixes from Peter Anvin: "A collection of very small fixes, mostly pure documentation." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, doc: Document that bootloader ID 4 is used also by iPXE x86, doc: Add a formal bootloader ID for kexec-tools x86, 8042: Enable A20 using KBC to fix S3 resume on some MSI laptops
2012-12-19Merge tag 'for-linus-20121219' of git://git.infradead.org/linux-mtdLinus Torvalds6-7/+117
Pull MTD updates from David Woodhouse: - Various cleanups especially in NAND tests - Add support for NAND flash on BCMA bus - DT support for sh_flctl and denali NAND drivers - Kill obsolete/superceded drivers (fortunet, nomadik_nand) - Fix JFFS2 locking bug in ENOMEM failure path - New SPI flash chips, as usual - Support writing in 'reliable mode' for DiskOnChip G4 - Debugfs support in nandsim * tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd: (96 commits) mtd: nand: typo in nand_id_has_period() comments mtd: nand/gpio: use io{read,write}*_rep accessors mtd: block2mtd: throttle writes by calling balance_dirty_pages_ratelimited. mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems mtd: nand/docg4: fix and improve read of factory bbt mtd: nand/docg4: reserve bb marker area in ecclayout mtd: nand/docg4: add support for writing in reliable mode mtd: mxc_nand: reorder part_probes to let cmdline override other sources mtd: mxc_nand: fix unbalanced clk_disable() in error path mtd: nandsim: Introduce debugfs infrastructure mtd: physmap_of: error checking to prevent a NULL pointer dereference mtg: docg3: potential divide by zero in doc_write_oob() mtd: bcm47xxnflash: writing support mtd: tests/read: initialize buffer for whole next page mtd: at91: atmel_nand: return bit flips for the PMECC read_page() mtd: fix recovery after failed write-buffer operation in cfi_cmdset_0002.c mtd: nand: onfi need to be probed in 8 bits mode mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width mtd: nand: print flash size during detection mted: nand_wait_ready timeout fix ...
2012-12-19Merge tag 'for-3.8-rc1' of git://gitorious.org/linux-pwm/linux-pwmLinus Torvalds8-3/+160
Pull pwm changes from Thierry Reding: "A new driver has been added for the SPEAr platform and the TWL4030/6030 driver has been replaced by two drivers that control the regular PWMs and the PWM driven LEDs provided by the chips. The vt8500, tiecap, tiehrpwm, i.MX, LPC32xx and Samsung drivers have all been improved and the device tree bindings now support the PWM signal polarity." Fix up trivial conflicts due to __devinit/exit removal. * tag 'for-3.8-rc1' of git://gitorious.org/linux-pwm/linux-pwm: (21 commits) pwm: samsung: add missing s3c->pwm_id assignment pwm: lpc32xx: Set the chip base for dynamic allocation pwm: lpc32xx: Properly disable the clock on device removal pwm: lpc32xx: Fix the PWM polarity pwm: i.MX: eliminate build warning pwm: Export of_pwm_xlate_with_flags() pwm: Remove pwm-twl6030 driver pwm: New driver to support PWM driven LEDs on TWL4030/6030 series of PMICs pwm: New driver to support PWMs on TWL4030/6030 series of PMICs pwm: pwm-tiehrpwm: pinctrl support pwm: tiehrpwm: Add device-tree binding pwm: pwm-tiehrpwm: Adding TBCLK gating support. pwm: pwm-tiecap: pinctrl support pwm: tiecap: Add device-tree binding pwm: Add TI PWM subsystem driver pwm: Device tree support for PWM polarity pwm: vt8500: Ensure PWM clock is enabled during pwm_config pwm: vt8500: Fix build error pwm: spear: Staticize spear_pwm_config() pwm: Add SPEAr PWM chip driver support ...
2012-12-19Merge tag 'modules-next-for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module update from Rusty Russell: "Nothing all that exciting; a new module-from-fd syscall for those who want to verify the source of the module (ChromeOS) and/or use standard IMA on it or other security hooks." * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: MODSIGN: Fix kbuild output when using default extra_certificates MODSIGN: Avoid using .incbin in C source modules: don't hand 0 to vmalloc. module: Remove a extra null character at the top of module->strtab. ASN.1: Use the ASN1_LONG_TAG and ASN1_INDEFINITE_LENGTH constants ASN.1: Define indefinite length marker constant moduleparam: use __UNIQUE_ID() __UNIQUE_ID() MODSIGN: Add modules_sign make target powerpc: add finit_module syscall. ima: support new kernel module syscall add finit_module syscall to asm-generic ARM: add finit_module syscall to ARM security: introduce kernel_module_from_file hook module: add flags arg to sys_finit_module() module: add syscall to load module from fd
2012-12-19spi: fix tegra SPI binding examplesAllen Martin2-2/+2
Fix name of slink binding and address of sflash example to make it self consistent. Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-18xtensa: initialize atomctl SRMax Filippov1-0/+44
In order to use S32C1I instruction on cores with ATOMCTL SR the register must be properly initialized. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linuxLinus Torvalds4-5/+125
Pull i2c-embedded changes from Wolfram Sang: - CBUS driver (an I2C variant) - continued rework of the omap driver - s3c2410 gets lots of fixes and gains pinctrl support - at91 gains DMA support - the GPIO muxer gains devicetree probing - typical fixes and additions all over * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (45 commits) i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag i2c: at91: add dma support i2c: at91: change struct members indentation i2c: at91: fix compilation warning i2c: mxs: Do not disable the I2C SMBus quick mode i2c: mxs: Handle i2c DMA failure properly i2c: s3c2410: Remove recently introduced performance overheads i2c: ocores: Move grlib set/get functions into #ifdef CONFIG_OF block i2c: s3c2410: Add fix for i2c suspend/resume i2c: s3c2410: Fix code to free gpios i2c: i2c-cbus-gpio: introduce driver i2c: ocores: Add support for the GRLIB port of the controller and use function pointers for getreg and setreg functions i2c: ocores: Add irq support for sparc i2c: omap: Move the remove constraint ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049 i2c: s3c2410: do not special case HDMIPHY stuck bus detection i2c: s3c2410: use exponential back off while polling for bus idle i2c: s3c2410: do not generate STOP for QUIRK_HDMIPHY i2c: s3c2410: grab adapter lock while changing i2c clock i2c: s3c2410: Add support for pinctrl ...
2012-12-18Merge branch 'akpm' (more patches from Andrew)Linus Torvalds3-5/+164
Merge patches from Andrew Morton: "Most of the rest of MM, plus a few dribs and drabs. I still have quite a few irritating patches left around: ones with dubious testing results, lack of review, ones which should have gone via maintainer trees but the maintainers are slack, etc. I need to be more activist in getting these things wrapped up outside the merge window, but they're such a PITA." * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (48 commits) mm/vmscan.c: avoid possible deadlock caused by too_many_isolated() vmscan: comment too_many_isolated() mm/kmemleak.c: remove obsolete simple_strtoul mm/memory_hotplug.c: improve comments mm/hugetlb: create hugetlb cgroup file in hugetlb_init mm/mprotect.c: coding-style cleanups Documentation: ABI: /sys/devices/system/node/ slub: drop mutex before deleting sysfs entry memcg: add comments clarifying aspects of cache attribute propagation kmem: add slab-specific documentation about the kmem controller slub: slub-specific propagation changes slab: propagate tunable values memcg: aggregate memcg cache values in slabinfo memcg/sl[au]b: shrink dead caches memcg/sl[au]b: track all the memcg children of a kmem_cache memcg: destroy memcg caches sl[au]b: allocate objects from memcg cache sl[au]b: always get the cache from its page in kmem_cache_free() memcg: skip memcg kmem allocations in specified code regions memcg: infrastructure to match an allocation to the right cache ...
2012-12-18Documentation: ABI: /sys/devices/system/node/Davidlohr Bueso1-1/+95
Describe NUMA node sysfs files/attributes. Note that for the specific dates and contacts I couldn't find, I left it as default for Oct 2002 and linux-mm. Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18kmem: add slab-specific documentation about the kmem controllerGlauber Costa1-0/+7
Signed-off-by: Glauber Costa <glommer@parallels.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Frederic Weisbecker <fweisbec@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: JoonSoo Kim <js1304@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Michal Hocko <mhocko@suse.cz> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Rik van Riel <riel@redhat.com> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18memcg: add documentation about the kmem controllerGlauber Costa1-1/+58
Signed-off-by: Glauber Costa <glommer@parallels.com> Acked-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Frederic Weisbecker <fweisbec@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: JoonSoo Kim <js1304@gmail.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Rik van Riel <riel@redhat.com> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18res_counter: return amount of charges after res_counter_uncharge()Glauber Costa1-3/+4
It is useful to know how many charges are still left after a call to res_counter_uncharge. While it is possible to issue a res_counter_read after uncharge, this can be racy. If we need, for instance, to take some action when the counters drop down to 0, only one of the callers should see it. This is the same semantics as the atomic variables in the kernel. Since the current return value is void, we don't need to worry about anything breaking due to this change: nobody relied on that, and only users appearing from now on will be checking this value. Signed-off-by: Glauber Costa <glommer@parallels.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: Frederic Weisbecker <fweisbec@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: JoonSoo Kim <js1304@gmail.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18Merge branch 'for-linus' of ↵Linus Torvalds6-0/+177
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull second round of input updates from Dmitry Torokhov: "As usual, there are a couple of new drivers, input core now supports managed input devices (devres), a slew of drivers now have device tree support and a bunch of fixes and cleanups." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (71 commits) Input: walkera0701 - fix crash on startup Input: matrix-keymap - provide a proper module license Input: gpio_keys_polled - switch to using gpio_request_one() Input: gpio_keys - switch to using gpio_request_one() Input: wacom - fix touch support for Bamboo Fun CTH-461 Input: xpad - add a few new VID/PID combinations Input: xpad - minor formatting fixes Input: gpio-keys-polled - honor 'autorepeat' setting in platform data Input: tca8418-keypad - switch to using managed resources Input: tca8418_keypad - increase severity of failures in probe() Input: tca8418_keypad - move device ID tables closer to where they are used Input: tca8418_keypad - use dev_get_platdata() to retrieve platform data Input: tca8418_keypad - use a temporary variable for parent device Input: tca8418_keypad - add support for shared interrupt Input: tca8418_keypad - add support for device tree bindings Input: remove Compaq iPAQ H3600 (Bitsy) touchscreen driver Input: bu21013_ts - add support for Device Tree booting Input: bu21013_ts - move GPIO init and exit functions into the driver Input: bu21013_ts - request regulator that actually exists ARM: ux500: Strip out duplicate touch screen platform information ...
2012-12-18Merge branch 'next' of ↵Linus Torvalds2-0/+97
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc update from Benjamin Herrenschmidt: "The main highlight is probably some base POWER8 support. There's more to come such as transactional memory support but that will wait for the next one. Overall it's pretty quiet, or rather I've been pretty poor at picking things up from patchwork and reviewing them this time around and Kumar no better on the FSL side it seems..." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (73 commits) powerpc+of: Rename and fix OF reconfig notifier error inject module powerpc: mpc5200: Add a3m071 board support powerpc/512x: don't compile any platform DIU code if the DIU is not enabled powerpc/mpc52xx: use module_platform_driver macro powerpc+of: Export of_reconfig_notifier_[register,unregister] powerpc/dma/raidengine: add raidengine device powerpc/iommu/fsl: Add PAMU bypass enable register to ccsr_guts struct powerpc/mpc85xx: Change spin table to cached memory powerpc/fsl-pci: Add PCI controller ATMU PM support powerpc/86xx: fsl_pcibios_fixup_bus requires CONFIG_PCI drivers/virt: the Freescale hypervisor driver doesn't need to check MSR[GS] powerpc/85xx: p1022ds: Use NULL instead of 0 for pointers powerpc: Disable relocation on exceptions when kexecing powerpc: Enable relocation on during exceptions at boot powerpc: Move get_longbusy_msecs into hvcall.h and remove duplicate function powerpc: Add wrappers to enable/disable relocation on exceptions powerpc: Add set_mode hcall powerpc: Setup relocation on exceptions for bare metal systems powerpc: Move initial mfspr LPCR out of __init_LPCR powerpc: Add relocation on exception vector handlers ...