aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2012-02-18Linux 3.3-rc4v3.3-rc4Linus Torvalds1-1/+1
2012-02-18Merge tag 'fixes-3.3-rc4' of ↵Linus Torvalds66-786/+524
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc These are the bug fixes that have accumulated since 3.3-rc3 in arm-soc. The majority of them are regression fixes for stuff that broke during the merge 3.3 window. The notable ones are: * The at91 ata drivers both broke because of an earlier cleanup patch that some other patches were based on. Jean-Christophe decided to remove the legacy at91_ide driver and fix the new-style at91-pata driver while keeping the cleanup patch. I almost rejected the patches for being too late and too big but in the end decided to accept them because they fix a regression. * A patch fixing build breakage from the sysdev-to-device conversion colliding with other changes touches a number of mach-s3c files. * b0654037 "ARM: orion: Fix Orion5x GPIO regression from MPP cleanup" is a mechanical change that unfortunately touches a lot of lines that should up in the diffstat. * tag 'fixes-3.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) ARM: at91: drop ide driver in favor of the pata one pata/at91: use newly introduced SMC accessors ARM: at91: add accessor to manage SMC ARM: at91:rtc/rtc-at91sam9: ioremap register bank ARM: at91: USB AT91 gadget registration for module ep93xx: fix build of vision_ep93xx.c ARM: OMAP2xxx: PM: fix OMAP2xxx-specific UART idle bug in v3.3 ARM: orion: Fix USB phy for orion5x. ARM: orion: Fix Orion5x GPIO regression from MPP cleanup ARM: EXYNOS: Add cpu-offset property in gic device tree node ARM: EXYNOS: Bring exynos4-dt up to date ARM: OMAP3: cm-t35: fix section mismatch warning ARM: OMAP2: Fix the OMAP2 only build break seen with 2011+ ARM tool-chains ARM: tegra: paz00: fix wrong UART port on mini-pcie plug ARM: tegra: paz00: fix wrong SD1 power gpio i2c: tegra: Add devexit_p() for remove ARM: EXYNOS: Correct M-5MOLS sensor clock frequency on Universal C210 board ARM: EXYNOS: Correct framebuffer window size on Nuri board ARM: SAMSUNG: Fix missing api-change from subsys_interface change ARM: EXYNOS: Fix "warning: initialization from incompatible pointer type" ...
2012-02-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds27-191/+212
1) VETH_INFO_PEER netlink attribute needs to have it's size validated, from Thomas Graf. 2) 'poll' module option of bnx2x driver crashes the machine, just remove it. From Michal Schmidt. 3) ks8851_mll driver reads the irq number from two places, but only initializes one of them, oops. Use only one location and fix this problem, from Jan Weitzel. 4) Fix buffer overrun and unicast sterring bugs in mellanox mlx4 driver, from Eugenia Emantayev. 5) Swapped kcalloc() args in RxRPC and mlx4, from Axel Lin. 6) PHY MDIO device name regression fixes from Florian Fainelli. 7) If the wake event IRQ line is different from the netdevice one, we have to properly route it to the stmmac interrupt handler. From Francesco Virlinzi. 8) Fix rwlock lock initialization ordering bug in mac80211, from Mohammed Shafi Shajakhan. 9) TCP lost_cnt can get out of sync, and in fact go negative, in certain circumstances. Fix the way we specify what sequence range to operate on in tcp_sacktag_one() to fix this bug. From Neal Cardwell. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits) net/ethernet: ks8851_mll fix irq handling veth: Enforce minimum size of VETH_INFO_PEER stmmac: update the driver version to Feb 2012 (v2) stmmac: move hw init in the probe (v2) stmmac: request_irq when use an ext wake irq line (v2) stmmac: do not discard frame on dribbling bit assert ipheth: Add iPhone 4S mlx4: add unicast steering entries to resource_tracker mlx4: fix QP tree trashing mlx4: fix buffer overrun 3c59x: shorten timer period for slave devices netpoll: netpoll_poll_dev() should access dev->flags RxRPC: Fix kcalloc parameters swapped bnx2x: remove the 'poll' module option tcp: fix tcp_shifted_skb() adjustment of lost_cnt_hint for FACK ks8851: Fix NOHZ local_softirq_pending 08 warning bnx2x: fix bnx2x_storm_stats_update() on big endian ixp4xx-eth: fix PHY name to match MDIO bus name octeon: fix PHY name to match MDIO bus name fec: fix PHY name to match fixed MDIO bus name ...
2012-02-18Merge tag 'for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Fixes a bootstrapping issue for some registers when a less commonly used method for register cache initialisation is used. Only affects a fairly small proportion of users that both don't use explicit register defaults and do use the cache. * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Fix cache defaults initialization from raw cache defaults
2012-02-18Merge tag 'ecryptfs-3.3-rc4-fixes' of ↵Linus Torvalds7-18/+89
git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Fixes maximum filename length and filesystem type reporting in statfs() calls and also fixes stale inode mode bits on eCryptfs inodes after a POSIX ACL was set on the lower filesystem's inode. * tag 'ecryptfs-3.3-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: ecryptfs: remove the second argument of k[un]map_atomic() eCryptfs: Copy up lower inode attrs after setting lower xattr eCryptfs: Improve statfs reporting
2012-02-18Merge tag 'pinctrl' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl pinctrl fixes for v3.3 * tag 'pinctrl-for-torvalds-20120216' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: restore pin naming
2012-02-18Merge branch 'merge' of ↵Linus Torvalds6-31/+42
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Here are a few more fixes for powerpc. Some are regressions, the rest is simple/obvious/nasty enough that I deemed it good to go now. Here's also step one of deprecating legacy iSeries support: we are removing it from the main defconfig. Nobody seems to be using it anymore and the code is nasty to maintain, (involves horrible hacks in various low level areas of the kernel) so we plan to actually rip it out at some point. For now let's just avoid building it by default. Stephen will proceed to do the actual removal later (probably 3.4 or 3.5). * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/perf: power_pmu_start restores incorrect values, breaking frequency events powerpc/adb: Use set_current_state() powerpc: Disable interrupts early in Program Check powerpc: Remove legacy iSeries from ppc64_defconfig powerpc/fsl/pci: Fix PCIe fixup regression powerpc: Fix kernel log of oops/panic instruction dump
2012-02-18Merge branch 'for-linus' of ↵Linus Torvalds3-8/+28
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci One regression fix for SR-IOV on PPC and a couple of misc fixes from Yinghai. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: PCI: Fix pci cardbus removal PCI: set pci sriov page size before reading SRIOV BAR PCI: workaround hard-wired bus number V2
2012-02-18Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds4-7/+22
3 radeon fixes, I have some exynos fixes to push later but I'll queue them separately once I've looked them over a bit. * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms: fix MSI re-arm on rv370+ drm/radeon/kms/atom: bios scratch reg handling updates drm/radeon/kms: drop lock in return path of radeon_fence_count_emitted.
2012-02-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds2-9/+24
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: sha512 - use standard ror64()
2012-02-18i387: re-introduce FPU state preloading at context switch timeLinus Torvalds4-42/+133
After all the FPU state cleanups and finally finding the problem that caused all our FPU save/restore problems, this re-introduces the preloading of FPU state that was removed in commit b3b0870ef3ff ("i387: do not preload FPU state at task switch time"). However, instead of simply reverting the removal, this reimplements preloading with several fixes, most notably - properly abstracted as a true FPU state switch, rather than as open-coded save and restore with various hacks. In particular, implementing it as a proper FPU state switch allows us to optimize the CR0.TS flag accesses: there is no reason to set the TS bit only to then almost immediately clear it again. CR0 accesses are quite slow and expensive, don't flip the bit back and forth for no good reason. - Make sure that the same model works for both x86-32 and x86-64, so that there are no gratuitous differences between the two due to the way they save and restore segment state differently due to architectural differences that really don't matter to the FPU state. - Avoid exposing the "preload" state to the context switch routines, and in particular allow the concept of lazy state restore: if nothing else has used the FPU in the meantime, and the process is still on the same CPU, we can avoid restoring state from memory entirely, just re-expose the state that is still in the FPU unit. That optimized lazy restore isn't actually implemented here, but the infrastructure is set up for it. Of course, older CPU's that use 'fnsave' to save the state cannot take advantage of this, since the state saving also trashes the state. In other words, there is now an actual _design_ to the FPU state saving, rather than just random historical baggage. Hopefully it's easier to follow as a result. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-18i387: move TS_USEDFPU flag from thread_info to task_structLinus Torvalds6-32/+30
This moves the bit that indicates whether a thread has ownership of the FPU from the TS_USEDFPU bit in thread_info->status to a word of its own (called 'has_fpu') in task_struct->thread.has_fpu. This fixes two independent bugs at the same time: - changing 'thread_info->status' from the scheduler causes nasty problems for the other users of that variable, since it is defined to be thread-synchronous (that's what the "TS_" part of the naming was supposed to indicate). So perfectly valid code could (and did) do ti->status |= TS_RESTORE_SIGMASK; and the compiler was free to do that as separate load, or and store instructions. Which can cause problems with preemption, since a task switch could happen in between, and change the TS_USEDFPU bit. The change to TS_USEDFPU would be overwritten by the final store. In practice, this seldom happened, though, because the 'status' field was seldom used more than once, so gcc would generally tend to generate code that used a read-modify-write instruction and thus happened to avoid this problem - RMW instructions are naturally low fat and preemption-safe. - On x86-32, the current_thread_info() pointer would, during interrupts and softirqs, point to a *copy* of the real thread_info, because x86-32 uses %esp to calculate the thread_info address, and thus the separate irq (and softirq) stacks would cause these kinds of odd thread_info copy aliases. This is normally not a problem, since interrupts aren't supposed to look at thread information anyway (what thread is running at interrupt time really isn't very well-defined), but it confused the heck out of irq_fpu_usable() and the code that tried to squirrel away the FPU state. (It also caused untold confusion for us poor kernel developers). It also turns out that using 'task_struct' is actually much more natural for most of the call sites that care about the FPU state, since they tend to work with the task struct for other reasons anyway (ie scheduling). And the FPU data that we are going to save/restore is found there too. Thanks to Arjan Van De Ven <arjan@linux.intel.com> for pointing us to the %esp issue. Cc: Arjan van de Ven <arjan@linux.intel.com> Reported-and-tested-by: Raphael Prevost <raphael@buro.asia> Acked-and-tested-by: Suresh Siddha <suresh.b.siddha@intel.com> Tested-by: Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-16i387: move AMD K7/K8 fpu fxsave/fxrstor workaround from save to restoreLinus Torvalds3-22/+16
The AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception is pending. In order to not leak FIP state from one process to another, we need to do a floating point load after the fxsave of the old process, and before the fxrstor of the new FPU state. That resets the state to the (uninteresting) kernel load, rather than some potentially sensitive user information. We used to do this directly after the FPU state save, but that is actually very inconvenient, since it (a) corrupts what is potentially perfectly good FPU state that we might want to lazy avoid restoring later and (b) on x86-64 it resulted in a very annoying ordering constraint, where "__unlazy_fpu()" in the task switch needs to be delayed until after the DS segment has been reloaded just to get the new DS value. Coupling it to the fxrstor instead of the fxsave automatically avoids both of these issues, and also ensures that we only do it when actually necessary (the FP state after a save may never actually get used). It's simply a much more natural place for the leaked state cleanup. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-16i387: do not preload FPU state at task switch timeLinus Torvalds4-68/+11
Yes, taking the trap to re-load the FPU/MMX state is expensive, but so is spending several days looking for a bug in the state save/restore code. And the preload code has some rather subtle interactions with both paravirtualization support and segment state restore, so it's not nearly as simple as it should be. Also, now that we no longer necessarily depend on a single bit (ie TS_USEDFPU) for keeping track of the state of the FPU, we migth be able to do better. If we are really switching between two processes that keep touching the FP state, save/restore is inevitable, but in the case of having one process that does most of the FPU usage, we may actually be able to do much better than the preloading. In particular, we may be able to keep track of which CPU the process ran on last, and also per CPU keep track of which process' FP state that CPU has. For modern CPU's that don't destroy the FPU contents on save time, that would allow us to do a lazy restore by just re-enabling the existing FPU state - with no restore cost at all! Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-16ecryptfs: remove the second argument of k[un]map_atomic()Cong Wang2-4/+4
Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
2012-02-16eCryptfs: Copy up lower inode attrs after setting lower xattrTyler Hicks1-0/+2
After passing through a ->setxattr() call, eCryptfs needs to copy the inode attributes from the lower inode to the eCryptfs inode, as they may have changed in the lower filesystem's ->setxattr() path. One example is if an extended attribute containing a POSIX Access Control List is being set. The new ACL may cause the lower filesystem to modify the mode of the lower inode and the eCryptfs inode would need to be updated to reflect the new mode. https://launchpad.net/bugs/926292 Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Reported-by: Sebastien Bacher <seb128@ubuntu.com> Cc: John Johansen <john.johansen@canonical.com> Cc: <stable@vger.kernel.org>
2012-02-16eCryptfs: Improve statfs reportingTyler Hicks4-14/+83
statfs() calls on eCryptfs files returned the wrong filesystem type and, when using filename encryption, the wrong maximum filename length. If mount-wide filename encryption is enabled, the cipher block size and the lower filesystem's max filename length will determine the max eCryptfs filename length. Pre-tested, known good lengths are used when the lower filesystem's namelen is 255 and a cipher with 8 or 16 byte block sizes is used. In other, less common cases, we fall back to a safe rounded-down estimate when determining the eCryptfs namelen. https://launchpad.net/bugs/885744 Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Reported-by: Kees Cook <keescook@chromium.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: John Johansen <john.johansen@canonical.com>
2012-02-16i387: don't ever touch TS_USEDFPU directly, use helper functionsLinus Torvalds4-23/+58
This creates three helper functions that do the TS_USEDFPU accesses, and makes everybody that used to do it by hand use those helpers instead. In addition, there's a couple of helper functions for the "change both CR0.TS and TS_USEDFPU at the same time" case, and the places that do that together have been changed to use those. That means that we have fewer random places that open-code this situation. The intent is partly to clarify the code without actually changing any semantics yet (since we clearly still have some hard to reproduce bug in this area), but also to make it much easier to use another approach entirely to caching the CR0.TS bit for software accesses. Right now we use a bit in the thread-info 'status' variable (this patch does not change that), but we might want to make it a full field of its own or even make it a per-cpu variable. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-16i387: move TS_USEDFPU clearing out of __save_init_fpu and into callersLinus Torvalds1-3/+6
Touching TS_USEDFPU without touching CR0.TS is confusing, so don't do it. By moving it into the callers, we always do the TS_USEDFPU next to the CR0.TS accesses in the source code, and it's much easier to see how the two go hand in hand. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-16i387: fix x86-64 preemption-unsafe user stack save/restoreLinus Torvalds3-8/+45
Commit 5b1cbac37798 ("i387: make irq_fpu_usable() tests more robust") added a sanity check to the #NM handler to verify that we never cause the "Device Not Available" exception in kernel mode. However, that check actually pinpointed a (fundamental) race where we do cause that exception as part of the signal stack FPU state save/restore code. Because we use the floating point instructions themselves to save and restore state directly from user mode, we cannot do that atomically with testing the TS_USEDFPU bit: the user mode access itself may cause a page fault, which causes a task switch, which saves and restores the FP/MMX state from the kernel buffers. This kind of "recursive" FP state save is fine per se, but it means that when the signal stack save/restore gets restarted, it will now take the '#NM' exception we originally tried to avoid. With preemption this can happen even without the page fault - but because of the user access, we cannot just disable preemption around the save/restore instruction. There are various ways to solve this, including using the "enable/disable_page_fault()" helpers to not allow page faults at all during the sequence, and fall back to copying things by hand without the use of the native FP state save/restore instructions. However, the simplest thing to do is to just allow the #NM from kernel space, but fix the race in setting and clearing CR0.TS that this all exposed: the TS bit changes and the TS_USEDFPU bit absolutely have to be atomic wrt scheduling, so while the actual state save/restore can be interrupted and restarted, the act of actually clearing/setting CR0.TS and the TS_USEDFPU bit together must not. Instead of just adding random "preempt_disable/enable()" calls to what is already excessively ugly code, this introduces some helper functions that mostly mirror the "kernel_fpu_begin/end()" functionality, just for the user state instead. Those helper functions should probably eventually replace the other ad-hoc CR0.TS and TS_USEDFPU tests too, but I'll need to think about it some more: the task switching functionality in particular needs to expose the difference between the 'prev' and 'next' threads, while the new helper functions intentionally were written to only work with 'current'. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-16powerpc/perf: power_pmu_start restores incorrect values, breaking frequency ↵Anton Blanchard1-1/+7
events perf on POWER stopped working after commit e050e3f0a71b (perf: Fix broken interrupt rate throttling). That patch exposed a bug in the POWER perf_events code. Since the PMCs count upwards and take an exception when the top bit is set, we want to write 0x80000000 - left in power_pmu_start. We were instead programming in left which effectively disables the counter until we eventually hit 0x80000000. This could take seconds or longer. With the patch applied I get the expected number of samples: SAMPLE events: 9948 Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: <stable@kernel.org>
2012-02-16powerpc/adb: Use set_current_state()majianpeng1-2/+2
Signed-off-by: majianpeng <majianpeng@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16powerpc: Disable interrupts early in Program CheckBenjamin Herrenschmidt1-1/+1
Program Check exceptions are the result of WARNs, BUGs, some type of breakpoints, kprobe, and other illegal instructions. We want interrupts (and thus preemption) to remain disabled while doing the initial stage of testing the reason and branching off to a debugger or kprobe, so we are still on the original CPU which makes debugging easier in various cases. This is how the code was intended, hence the local_irq_enable() right in the middle of program_check_exception(). However, the assembly exception prologue for that exception was incorrectly marked as enabling interrupts, which defeats that (and records a redundant enable with lockdep). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16powerpc: Remove legacy iSeries from ppc64_defconfigStephen Rothwell1-5/+0
Since we are heading towards removing the Legacy iSeries platform, start by no longer building it for ppc64_defconfig. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16powerpc/fsl/pci: Fix PCIe fixup regressionBenjamin Herrenschmidt1-19/+29
Upstream changes to the way PHB resources are registered broke the resource fixup for FSL boards. We can no longer rely on the resource pointer array for the PHB's pci_bus structure, so let's leave it alone and go straight for the PHB resources instead. This also makes the code generally more readable. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16powerpc: Fix kernel log of oops/panic instruction dumpIra Snyder1-3/+3
A kernel oops/panic prints an instruction dump showing several instructions before and after the instruction which caused the oops/panic. The code intended that the faulting instruction be enclosed in angle brackets, however a bug caused the faulting instruction to be interpreted by printk() as the message log level. To fix this, the KERN_CONT log level is added before the actual text of the printed message. === Before the patch === [ 1081.587266] Instruction dump: [ 1081.590236] 7c000110 7c0000f8 5400077c 552907f6 7d290378 992b0003 4e800020 38000001 [ 1081.598034] 3d20c03a 9009a114 7c0004ac 39200000 [ 1081.602500] 4e800020 3803ffd0 2b800009 <4>[ 1081.587266] Instruction dump: <4>[ 1081.590236] 7c000110 7c0000f8 5400077c 552907f6 7d290378 992b0003 4e800020 38000001 <4>[ 1081.598034] 3d20c03a 9009a114 7c0004ac 39200000 <98090000>[ 1081.602500] 4e800020 3803ffd0 2b800009 === After the patch === [ 51.385216] Instruction dump: [ 51.388186] 7c000110 7c0000f8 5400077c 552907f6 7d290378 992b0003 4e800020 38000001 [ 51.395986] 3d20c03a 9009a114 7c0004ac 39200000 <98090000> 4e800020 3803ffd0 2b800009 <4>[ 51.385216] Instruction dump: <4>[ 51.388186] 7c000110 7c0000f8 5400077c 552907f6 7d290378 992b0003 4e800020 38000001 <4>[ 51.395986] 3d20c03a 9009a114 7c0004ac 39200000 <98090000> 4e800020 3803ffd0 2b800009 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16crypto: sha512 - use standard ror64()Alexey Dobriyan2-9/+24
Use standard ror64() instead of hand-written. There is no standard ror64, so create it. The difference is shift value being "unsigned int" instead of uint64_t (for which there is no reason). gcc starts to emit native ROR instructions which it doesn't do for some reason currently. This should make the code faster. Patch survives in-tree crypto test and ping flood with hmac(sha512) on. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-02-15net/ethernet: ks8851_mll fix irq handlingJan Weitzel1-8/+6
There a two different irq variables ks->irq and netdev->irq. Only ks->irq is set on probe, so disabling irq in ks_start_xmit fails. This patches remove ks->irq from private data and use only netdev->irq. Tested on a kernel 3.0 based OMAP4430 SMP Board Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15veth: Enforce minimum size of VETH_INFO_PEERThomas Graf1-1/+3
VETH_INFO_PEER carries struct ifinfomsg plus optional IFLA attributes. A minimal size of sizeof(struct ifinfomsg) must be enforced or we may risk accessing that struct beyond the limits of the netlink message. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15stmmac: update the driver version to Feb 2012 (v2)Giuseppe CAVALLARO1-1/+1
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15stmmac: move hw init in the probe (v2)Giuseppe CAVALLARO4-116/+105
This patch moves the MAC HW initialization and the HW feature verification from the open to the probe function as D. Miller suggested. So the patch actually reorganizes and tidies-up some parts of the driver and indeed fixes some problem when tune its HW features. These can be overwritten by looking at the HW cap register at run-time and that generated problems. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Francesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15stmmac: request_irq when use an ext wake irq line (v2)Francesco Virlinzi1-0/+16
In case of we use an external Wake-Up IRQ line (priv->wol_irq != dev->irq) we need to invoke the request_irq. Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15stmmac: do not discard frame on dribbling bit assertGiuseppe CAVALLARO4-3/+9
If this bit is set and the CRC error is reset, then the packet is valid. Only report this as stat info. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15ipheth: Add iPhone 4STim Gardner1-0/+5
BugLink: http://bugs.launchpad.net/bugs/900802 Cc: stable@vger.kernel.org 3.2+ Signed-off-by: Till Kamppeter <till.kamppeter@gmail.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15mlx4: add unicast steering entries to resource_trackerEugenia Emantayev1-7/+11
Add unicast steering entries to resource tracker. Do qp_detach also for these entries when VF doesn't shut down gracefully. Otherwise there is leakage of these resources, since they are not tracked. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15mlx4: fix QP tree trashingEugenia Emantayev1-0/+1
When adding new unicast steer entry, before moving qp to state ready, actually before calling mlx4_RST2INIT_QP_wrapper(), there were added a lot of entries with local_qpn=0 into radix tree. This fact impacted the get_res() function and proper functioning of resource tracker in addition to adding trash entries into radix tree. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@melllanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15mlx4: fix buffer overrunEugenia Emantayev1-1/+1
When passing MLX4_UC_STEER=1 it was translated to value 2 after mlx4_QP_ATTACH_wrapper. Therefore in new_steering_entry() unicast steer entries were added to index 2 of array of size 2. Fixing this bug by shift right to one position. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15Merge branch 'master' of ↵John W. Linville2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-02-15regmap: Fix cache defaults initialization from raw cache defaultsLars-Peter Clausen1-2/+2
Currently registers with a value of 0 are ignored when initializing the register defaults from raw defaults. This worked in the past, because registers without a explicit default were assumed to have a default value of 0. This was changed in commit b03622a8 ("regmap: Ensure rbtree syncs registers set to zero properly"). As a result registers, which have a raw default value of 0 are now assumed to have no default. This again can result in unnecessary writes when syncing the cache. It will also result in unnecessary reads for e.g. the first update operation. In the case where readback is not possible this will even let the update operation fail, if the register has not been written to before. So this patch removes the check. Instead it adds a check to ignore raw defaults for registers which are volatile, since those registers are not cached. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-02-15i387: fix sense of sanity checkLinus Torvalds1-1/+1
The check for save_init_fpu() (introduced in commit 5b1cbac37798: "i387: make irq_fpu_usable() tests more robust") was the wrong way around, but I hadn't noticed, because my "tests" were bogus: the FPU exceptions are disabled by default, so even doing a divide by zero never actually triggers this code at all unless you do extra work to enable them. So if anybody did enable them, they'd get one spurious warning. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-14Merge tag 'for-linus' of ↵Linus Torvalds2-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator One small bug fix from Axel plus a fix for a build failure in unrealistic but commonly built configs which for some reason manage to survive for an awfully long time in -next without any reports. * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Fix getting voltage in max8649_enable_time() regulator: Fix mc13xxx regulator modular build (again)
2012-02-14Merge branch 'merge' of ↵Linus Torvalds9-27/+51
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Quoth BenH: "Here are a few powerpc fixes for 3.3, all pretty trivial. I also added the patch to define GET_IP/SET_IP so we can use some more asm-generic goodness." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pseries/eeh: Fix crash when error happens during device probe powerpc/pseries: Fix partition migration hang in stop_topology_update powerpc/powernv: Disable interrupts while taking phb->lock powerpc: Fix WARN_ON in decrementer_check_overflow powerpc/wsp: Fix IRQ affinity setting powerpc: Implement GET_IP/SET_IP powerpc/wsp: Permanently enable PCI class code workaround
2012-02-14Merge tag 'mmc-fixes-for-3.3-rc4' of ↵Linus Torvalds20-133/+269
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc MMC fixes for 3.3-rc4: * The most visible fix here is against a regression introduced in 3.3-rc1 that ran cards in Ultra High Speed mode even when they failed to initialize in that mode, leading to lower-speed cards failing to mount. * A lockdep warning introduced in 3.3-rc1 is fixed. * Various other small driver fixes, most notably for a NULL dereference when using highmem with dw_mmc. * tag 'mmc-fixes-for-3.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: dw_mmc: Fix PIO mode with support of highmem mmc: atmel-mci: save and restore sdioirq when soft reset is performed mmc: block: Init ro_lock sysfs attr to fix lockdep warnings mmc: sh_mmcif: fix late delayed work initialisation mmc: tmio_mmc: fix card eject during IO with DMA mmc: core: Fix comparison issue in mmc_compare_ext_csds mmc: core: Fix PowerOff Notify suspend/resume mmc: sdhci-pci: set Medfield SDIO as non-removable mmc: core: add the capability for broken voltage mmc: core: Fix low speed mmc card detection failure mmc: esdhc: set the timeout to the max value mmc: esdhc: add PIO mode support mmc: core: Ensure clocks are always enabled before host interaction mmc: of_mmc_spi: fix little endian support mmc: core: UHS sdio card that fails should not exceed 50MHz mmc: esdhc: fix errors when booting kernel on Freescale eSDHC version 2.3
2012-02-14Merge tag 'stable/for-linus-fixes-3.3-rc3' of ↵Linus Torvalds7-13/+26
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Two fixes for VCPU offlining; One to fix the string format exposed by the xen-pci[front|back] to conform to the one used in majority of PCI drivers; Two fixes to make the code more resilient to invalid configurations. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> * tag 'stable/for-linus-fixes-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xenbus_dev: add missing error check to watch handling xen/pci[front|back]: Use %d instead of %1x for displaying PCI devfn. xen pvhvm: do not remap pirqs onto evtchns if !xen_have_vector_callback xen/smp: Fix CPU online/offline bug triggering a BUG: scheduling while atomic. xen/bootup: During bootup suppress XENBUS: Unable to read cpu state
2012-02-143c59x: shorten timer period for slave devicesEric Dumazet1-1/+1
Jean Delvare reported bonding on top of 3c59x adapters was not detecting network cable removal fast enough. 3c59x indeed uses a 60 seconds timer to check link status if carrier is on, and 5 seconds if carrier is off. This patch reduces timer period to 5 seconds if device is a bonding slave. Reported-by: Jean Delvare <jdelvare@suse.de> Acked-by: Jean Delvare <jdelvare@suse.de> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14netpoll: netpoll_poll_dev() should access dev->flagsEric Dumazet1-1/+1
commit 5a698af53f (bond: service netpoll arp queue on master device) tested IFF_SLAVE flag against dev->priv_flags instead of dev->flags Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14RxRPC: Fix kcalloc parameters swappedAxel Lin1-2/+2
The first parameter should be "number of elements" and the second parameter should be "element size". Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14bnx2x: remove the 'poll' module optionMichal Schmidt1-16/+1
'poll' was a debugging option, but turning it on these days leads to kernel panic. Remove it. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14tcp: fix tcp_shifted_skb() adjustment of lost_cnt_hint for FACKNeal Cardwell1-0/+4
This commit ensures that lost_cnt_hint is correctly updated in tcp_shifted_skb() for FACK TCP senders. The lost_cnt_hint adjustment in tcp_sacktag_one() only applies to non-FACK senders, so FACK senders need their own adjustment. This applies the spirit of 1e5289e121372a3494402b1b131b41bfe1cf9b7f - except now that the sequence range passed into tcp_sacktag_one() is correct we need only have a special case adjustment for FACK. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14Merge tag 'sound-fixes' of ↵Linus Torvalds5-7/+35
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound sound fixes for 3.3-rc4 Basically all small fixes suited as rc4: a few HD-audio regression fixes, a stable fix for an old Dell laptop with intel8x0, and a simple fix for ASoC fsi. * tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: intel8x0: Fix default inaudible sound on Gateway M520 ALSA: hda - Fix silent speaker output on Acer Aspire 6935 ALSA: hda - Fix initialization of secondary capture source on VT1705 ASoC: fsi: fixup fsi_pointer() calculation method ALSA: hda - Fix mute-LED VREF value for new HP laptops