aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/atm/ueagle-atm.c8
-rw-r--r--drivers/usb/c67x00/c67x00-drv.c2
-rw-r--r--drivers/usb/c67x00/c67x00-hcd.h2
-rw-r--r--drivers/usb/c67x00/c67x00-sched.c2
-rw-r--r--drivers/usb/class/cdc-acm.h2
-rw-r--r--drivers/usb/class/usbtmc.c2
-rw-r--r--drivers/usb/core/hcd.c2
-rw-r--r--drivers/usb/core/hub.c2
-rw-r--r--drivers/usb/early/ehci-dbgp.c2
-rw-r--r--drivers/usb/gadget/amd5536udc.c14
-rw-r--r--drivers/usb/gadget/amd5536udc.h2
-rw-r--r--drivers/usb/gadget/at91_udc.c2
-rw-r--r--drivers/usb/gadget/composite.c6
-rw-r--r--drivers/usb/gadget/f_audio.c2
-rw-r--r--drivers/usb/gadget/f_ncm.c2
-rw-r--r--drivers/usb/gadget/fsl_qe_udc.h6
-rw-r--r--drivers/usb/gadget/fsl_udc_core.c6
-rw-r--r--drivers/usb/gadget/fsl_usb2_udc.h4
-rw-r--r--drivers/usb/gadget/gmidi.c2
-rw-r--r--drivers/usb/gadget/langwell_udc.c2
-rw-r--r--drivers/usb/gadget/mv_udc_core.c6
-rw-r--r--drivers/usb/gadget/net2280.c2
-rw-r--r--drivers/usb/gadget/nokia.c2
-rw-r--r--drivers/usb/gadget/printer.c2
-rw-r--r--drivers/usb/gadget/pxa27x_udc.c12
-rw-r--r--drivers/usb/gadget/s3c-hsotg.c18
-rw-r--r--drivers/usb/host/Kconfig2
-rw-r--r--drivers/usb/host/ehci.h2
-rw-r--r--drivers/usb/host/fhci-hcd.c2
-rw-r--r--drivers/usb/host/fhci-tds.c8
-rw-r--r--drivers/usb/host/fhci.h4
-rw-r--r--drivers/usb/host/imx21-hcd.c2
-rw-r--r--drivers/usb/host/isp116x.h2
-rw-r--r--drivers/usb/host/isp1362-hcd.c2
-rw-r--r--drivers/usb/host/ohci-hcd.c2
-rw-r--r--drivers/usb/host/oxu210hp-hcd.c4
-rw-r--r--drivers/usb/host/whci/qset.c2
-rw-r--r--drivers/usb/host/xhci.c4
-rw-r--r--drivers/usb/host/xhci.h2
-rw-r--r--drivers/usb/image/microtek.c8
-rw-r--r--drivers/usb/misc/iowarrior.c2
-rw-r--r--drivers/usb/otg/isp1301_omap.c2
-rw-r--r--drivers/usb/otg/langwell_otg.c4
-rw-r--r--drivers/usb/serial/aircable.c4
-rw-r--r--drivers/usb/serial/cp210x.c2
-rw-r--r--drivers/usb/serial/cypress_m8.c2
-rw-r--r--drivers/usb/serial/ftdi_sio.c2
-rw-r--r--drivers/usb/serial/io_edgeport.c2
-rw-r--r--drivers/usb/serial/io_edgeport.h2
-rw-r--r--drivers/usb/serial/io_ti.c2
-rw-r--r--drivers/usb/serial/opticon.c2
-rw-r--r--drivers/usb/storage/ene_ub6250.c4
-rw-r--r--drivers/usb/storage/isd200.c2
-rw-r--r--drivers/usb/storage/scsiglue.c2
-rw-r--r--drivers/usb/storage/shuttle_usbat.c2
-rw-r--r--drivers/usb/wusbcore/crypto.c4
-rw-r--r--drivers/usb/wusbcore/reservation.c2
-rw-r--r--drivers/usb/wusbcore/rh.c2
-rw-r--r--drivers/usb/wusbcore/wa-rpipe.c2
-rw-r--r--drivers/usb/wusbcore/wa-xfer.c8
-rw-r--r--drivers/usb/wusbcore/wusbhc.h2
61 files changed, 108 insertions, 108 deletions
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index b268e9fccb4..e71521ce301 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -1283,7 +1283,7 @@ static void uea_set_bulk_timeout(struct uea_softc *sc, u32 dsrate)
/* in bulk mode the modem have problem with high rate
* changing internal timing could improve things, but the
- * value is misterious.
+ * value is mysterious.
* ADI930 don't support it (-EPIPE error).
*/
@@ -1743,7 +1743,7 @@ static int uea_send_cmvs_e1(struct uea_softc *sc)
goto out;
}
} else {
- /* This realy should not happen */
+ /* This really should not happen */
uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver);
goto out;
}
@@ -1798,7 +1798,7 @@ static int uea_send_cmvs_e4(struct uea_softc *sc)
goto out;
}
} else {
- /* This realy should not happen */
+ /* This really should not happen */
uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver);
goto out;
}
@@ -1829,7 +1829,7 @@ static int uea_start_reset(struct uea_softc *sc)
/* mask interrupt */
sc->booting = 1;
- /* We need to set this here because, a ack timeout could have occured,
+ /* We need to set this here because, a ack timeout could have occurred,
* but before we start the reboot, the ack occurs and set this to 1.
* So we will failed to wait Ready CMV.
*/
diff --git a/drivers/usb/c67x00/c67x00-drv.c b/drivers/usb/c67x00/c67x00-drv.c
index b6d49234e52..62050f7a4f9 100644
--- a/drivers/usb/c67x00/c67x00-drv.c
+++ b/drivers/usb/c67x00/c67x00-drv.c
@@ -27,7 +27,7 @@
* the link between the common hardware parts and the subdrivers (e.g.
* interrupt handling).
*
- * The c67x00 has 2 SIE's (serial interface engine) wich can be configured
+ * The c67x00 has 2 SIE's (serial interface engine) which can be configured
* to be host, device or OTG (with some limitations, E.G. only SIE1 can be OTG).
*
* Depending on the platform configuration, the SIE's are created and
diff --git a/drivers/usb/c67x00/c67x00-hcd.h b/drivers/usb/c67x00/c67x00-hcd.h
index 74e44621e31..e3d493d4d61 100644
--- a/drivers/usb/c67x00/c67x00-hcd.h
+++ b/drivers/usb/c67x00/c67x00-hcd.h
@@ -34,7 +34,7 @@
/*
* The following parameters depend on the CPU speed, bus speed, ...
* These can be tuned for specific use cases, e.g. if isochronous transfers
- * are very important, bandwith can be sacrificed to guarantee that the
+ * are very important, bandwidth can be sacrificed to guarantee that the
* 1ms deadline will be met.
* If bulk transfers are important, the MAX_FRAME_BW can be increased,
* but some (or many) isochronous deadlines might not be met.
diff --git a/drivers/usb/c67x00/c67x00-sched.c b/drivers/usb/c67x00/c67x00-sched.c
index f6b3c253f3f..a03fbc15fa9 100644
--- a/drivers/usb/c67x00/c67x00-sched.c
+++ b/drivers/usb/c67x00/c67x00-sched.c
@@ -907,7 +907,7 @@ static inline int c67x00_end_of_data(struct c67x00_td *td)
/* Remove all td's from the list which come
* after last_td and are meant for the same pipe.
- * This is used when a short packet has occured */
+ * This is used when a short packet has occurred */
static inline void c67x00_clear_pipe(struct c67x00_hcd *c67x00,
struct c67x00_td *last_td)
{
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index 5eeb570b9a6..b4ea54dbf32 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -52,7 +52,7 @@
*/
/*
- * The only reason to have several buffers is to accomodate assumptions
+ * The only reason to have several buffers is to accommodate assumptions
* in line disciplines. They ask for empty space amount, receive our URB size,
* and proceed to issue several 1-character writes, assuming they will fit.
* The very first write takes a complete URB. Fortunately, this only happens
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 6a54634ab82..385acb895ab 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -483,7 +483,7 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf,
}
done += n_characters;
- /* Terminate if end-of-message bit recieved from device */
+ /* Terminate if end-of-message bit received from device */
if ((buffer[8] & 0x01) && (actual >= n_characters + 12))
remaining = 0;
else
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 02b4dbfa488..8eed05d2383 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -700,7 +700,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
/* The USB 2.0 spec says 256 ms. This is close enough and won't
* exceed that limit if HZ is 100. The math is more clunky than
* maybe expected, this is to make sure that all timers for USB devices
- * fire at the same time to give the CPU a break inbetween */
+ * fire at the same time to give the CPU a break in between */
if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) :
(length == 0 && hcd->status_urb != NULL))
mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 564eaa5525d..8fb754916c6 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1649,7 +1649,7 @@ void usb_disconnect(struct usb_device **pdev)
/* mark the device as inactive, so any further urb submissions for
* this device (and any of its children) will fail immediately.
- * this quiesces everyting except pending urbs.
+ * this quiesces everything except pending urbs.
*/
usb_set_device_state(udev, USB_STATE_NOTATTACHED);
dev_info(&udev->dev, "USB disconnect, device number %d\n",
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c
index 0bc06e2bcfc..a6a350f5827 100644
--- a/drivers/usb/early/ehci-dbgp.c
+++ b/drivers/usb/early/ehci-dbgp.c
@@ -648,7 +648,7 @@ static int ehci_reset_port(int port)
if (!(portsc & PORT_CONNECT))
return -ENOTCONN;
- /* bomb out completely if something weird happend */
+ /* bomb out completely if something weird happened */
if ((portsc & PORT_CSC))
return -EINVAL;
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index f8dd7269d79..6e42aab7580 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -278,7 +278,7 @@ static int udc_enable_dev_setup_interrupts(struct udc *dev)
return 0;
}
-/* Calculates fifo start of endpoint based on preceeding endpoints */
+/* Calculates fifo start of endpoint based on preceding endpoints */
static int udc_set_txfifo_addr(struct udc_ep *ep)
{
struct udc *dev;
@@ -2137,7 +2137,7 @@ static irqreturn_t udc_data_out_isr(struct udc *dev, int ep_ix)
if (use_dma) {
/* BNA event ? */
if (tmp & AMD_BIT(UDC_EPSTS_BNA)) {
- DBG(dev, "BNA ep%dout occured - DESPTR = %x \n",
+ DBG(dev, "BNA ep%dout occurred - DESPTR = %x \n",
ep->num, readl(&ep->regs->desptr));
/* clear BNA */
writel(tmp | AMD_BIT(UDC_EPSTS_BNA), &ep->regs->sts);
@@ -2151,7 +2151,7 @@ static irqreturn_t udc_data_out_isr(struct udc *dev, int ep_ix)
}
/* HE event ? */
if (tmp & AMD_BIT(UDC_EPSTS_HE)) {
- dev_err(&dev->pdev->dev, "HE ep%dout occured\n", ep->num);
+ dev_err(&dev->pdev->dev, "HE ep%dout occurred\n", ep->num);
/* clear HE */
writel(tmp | AMD_BIT(UDC_EPSTS_HE), &ep->regs->sts);
@@ -2354,7 +2354,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
/* BNA ? */
if (epsts & AMD_BIT(UDC_EPSTS_BNA)) {
dev_err(&dev->pdev->dev,
- "BNA ep%din occured - DESPTR = %08lx \n",
+ "BNA ep%din occurred - DESPTR = %08lx \n",
ep->num,
(unsigned long) readl(&ep->regs->desptr));
@@ -2367,7 +2367,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
/* HE event ? */
if (epsts & AMD_BIT(UDC_EPSTS_HE)) {
dev_err(&dev->pdev->dev,
- "HE ep%dn occured - DESPTR = %08lx \n",
+ "HE ep%dn occurred - DESPTR = %08lx \n",
ep->num, (unsigned long) readl(&ep->regs->desptr));
/* clear HE */
@@ -2384,7 +2384,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
req = list_entry(ep->queue.next,
struct udc_request, queue);
/*
- * length bytes transfered
+ * length bytes transferred
* check dma done of last desc. in PPBDU mode
*/
if (use_dma_ppb_du) {
@@ -2784,7 +2784,7 @@ static irqreturn_t udc_control_in_isr(struct udc *dev)
/* write fifo */
udc_txfifo_write(ep, &req->req);
- /* lengh bytes transfered */
+ /* lengh bytes transferred */
len = req->req.length - req->req.actual;
if (len > ep->ep.maxpacket)
len = ep->ep.maxpacket;
diff --git a/drivers/usb/gadget/amd5536udc.h b/drivers/usb/gadget/amd5536udc.h
index 4bbabbbfc93..1d1c7543468 100644
--- a/drivers/usb/gadget/amd5536udc.h
+++ b/drivers/usb/gadget/amd5536udc.h
@@ -584,7 +584,7 @@ union udc_setup_data {
* SET and GET bitfields in u32 values
* via constants for mask/offset:
* <bit_field_stub_name> is the text between
- * UDC_ and _MASK|_OFS of appropiate
+ * UDC_ and _MASK|_OFS of appropriate
* constant
*
* set bitfield value in u32 u32Val
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index bb8ddf0469f..9b7cdb16f26 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -826,7 +826,7 @@ done:
return status;
}
-/* reinit == restore inital software state */
+/* reinit == restore initial software state */
static void udc_reinit(struct at91_udc *udc)
{
u32 i;
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index c2251c40a20..82314ed2250 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -42,7 +42,7 @@
static struct usb_composite_driver *composite;
static int (*composite_gadget_bind)(struct usb_composite_dev *cdev);
-/* Some systems will need runtime overrides for the product identifers
+/* Some systems will need runtime overrides for the product identifiers
* published in the device descriptor, either numbers or strings or both.
* String parameters are in UTF-8 (superset of ASCII's 7 bit characters).
*/
@@ -205,14 +205,14 @@ int usb_function_activate(struct usb_function *function)
* usb_interface_id() is called from usb_function.bind() callbacks to
* allocate new interface IDs. The function driver will then store that
* ID in interface, association, CDC union, and other descriptors. It
- * will also handle any control requests targetted at that interface,
+ * will also handle any control requests targeted at that interface,
* particularly changing its altsetting via set_alt(). There may
* also be class-specific or vendor-specific requests to handle.
*
* All interface identifier should be allocated using this routine, to
* ensure that for example different functions don't wrongly assign
* different meanings to the same identifier. Note that since interface
- * identifers are configuration-specific, functions used in more than
+ * identifiers are configuration-specific, functions used in more than
* one configuration (or more than once in a given configuration) need
* multiple versions of the relevant descriptors.
*
diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c
index 00975ed903d..9abecfddb27 100644
--- a/drivers/usb/gadget/f_audio.c
+++ b/drivers/usb/gadget/f_audio.c
@@ -742,7 +742,7 @@ int __init control_selector_init(struct f_audio *audio)
}
/**
- * audio_bind_config - add USB audio fucntion to a configuration
+ * audio_bind_config - add USB audio function to a configuration
* @c: the configuration to supcard the USB audio function
* Context: single threaded during gadget setup
*
diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c
index 130eee678c8..86902a60bcd 100644
--- a/drivers/usb/gadget/f_ncm.c
+++ b/drivers/usb/gadget/f_ncm.c
@@ -111,7 +111,7 @@ static inline unsigned ncm_bitrate(struct usb_gadget *g)
#define NTB_OUT_SIZE 16384
/*
- * skbs of size less than that will not be alligned
+ * skbs of size less than that will not be aligned
* to NCM's dwNtbInMaxSize to save bus bandwidth
*/
diff --git a/drivers/usb/gadget/fsl_qe_udc.h b/drivers/usb/gadget/fsl_qe_udc.h
index bea5b827beb..e35e24fd64b 100644
--- a/drivers/usb/gadget/fsl_qe_udc.h
+++ b/drivers/usb/gadget/fsl_qe_udc.h
@@ -208,14 +208,14 @@ struct qe_frame{
/* Frame status field */
/* Receive side */
#define FRAME_OK 0x00000000 /* Frame tranmitted or received OK */
-#define FRAME_ERROR 0x80000000 /* Error occured on frame */
+#define FRAME_ERROR 0x80000000 /* Error occurred on frame */
#define START_FRAME_LOST 0x40000000 /* START_FRAME_LOST */
#define END_FRAME_LOST 0x20000000 /* END_FRAME_LOST */
#define RX_ER_NONOCT 0x10000000 /* Rx Non Octet Aligned Packet */
#define RX_ER_BITSTUFF 0x08000000 /* Frame Aborted --Received packet
with bit stuff error */
#define RX_ER_CRC 0x04000000 /* Received packet with CRC error */
-#define RX_ER_OVERUN 0x02000000 /* Over-run occured on reception */
+#define RX_ER_OVERUN 0x02000000 /* Over-run occurred on reception */
#define RX_ER_PID 0x01000000 /* Wrong PID received */
/* Tranmit side */
#define TX_ER_NAK 0x00800000 /* Received NAK handshake */
@@ -379,7 +379,7 @@ struct qe_udc {
#define T_LSP 0x01000000 /* Low-speed transaction */
#define T_PID 0x00c00000 /* packet id */
#define T_NAK 0x00100000 /* No ack. */
-#define T_STAL 0x00080000 /* Stall recieved */
+#define T_STAL 0x00080000 /* Stall received */
#define T_TO 0x00040000 /* time out */
#define T_UN 0x00020000 /* underrun */
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 912cb8e63fe..07499c1cdcc 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -464,7 +464,7 @@ static int fsl_ep_enable(struct usb_ep *_ep,
max = le16_to_cpu(desc->wMaxPacketSize);
- /* Disable automatic zlp generation. Driver is reponsible to indicate
+ /* Disable automatic zlp generation. Driver is responsible to indicate
* explicitly through req->req.zero. This is needed to enable multi-td
* request. */
zlt = 1;
@@ -648,7 +648,7 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req)
| EP_QUEUE_HEAD_STATUS_HALT));
dQH->size_ioc_int_sts &= temp;
- /* Ensure that updates to the QH will occure before priming. */
+ /* Ensure that updates to the QH will occur before priming. */
wmb();
/* Prime endpoint by writing 1 to ENDPTPRIME */
@@ -1459,7 +1459,7 @@ static int process_ep_req(struct fsl_udc *udc, int pipe,
status = -EILSEQ;
break;
} else
- ERR("Unknown error has occured (0x%x)!\n",
+ ERR("Unknown error has occurred (0x%x)!\n",
errors);
} else if (le32_to_cpu(curr_td->size_ioc_sts)
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
index 20aeceed48c..e88cce5c2c0 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -15,7 +15,7 @@ struct usb_dr_device {
u8 res1[256];
u16 caplength; /* Capability Register Length */
u16 hciversion; /* Host Controller Interface Version */
- u32 hcsparams; /* Host Controller Structual Parameters */
+ u32 hcsparams; /* Host Controller Structural Parameters */
u32 hccparams; /* Host Controller Capability Parameters */
u8 res2[20];
u32 dciversion; /* Device Controller Interface Version */
@@ -52,7 +52,7 @@ struct usb_dr_host {
u8 res1[256];
u16 caplength; /* Capability Register Length */
u16 hciversion; /* Host Controller Interface Version */
- u32 hcsparams; /* Host Controller Structual Parameters */
+ u32 hcsparams; /* Host Controller Structural Parameters */
u32 hccparams; /* Host Controller Capability Parameters */
u8 res2[20];
u32 dciversion; /* Device Controller Interface Version */
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 0ab7e141d49..47b86b99d44 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -67,7 +67,7 @@ MODULE_PARM_DESC(index, "Index value for the USB MIDI Gadget adapter.");
module_param(id, charp, 0444);
MODULE_PARM_DESC(id, "ID string for the USB MIDI Gadget adapter.");
-/* Some systems will want different product identifers published in the
+/* Some systems will want different product identifiers published in the
* device descriptor, either numbers or strings or both. These string
* parameters are in UTF-8 (superset of ASCII's 7 bit characters).
*/
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index 1eca8b47ce3..9cee88a43a7 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -642,7 +642,7 @@ static int queue_dtd(struct langwell_ep *ep, struct langwell_request *req)
dqh->dtd_status &= dtd_status;
dev_vdbg(&dev->pdev->dev, "dqh->dtd_status = 0x%x\n", dqh->dtd_status);
- /* ensure that updates to the dQH will occure before priming */
+ /* ensure that updates to the dQH will occur before priming */
wmb();
/* write 1 to endptprime register to PRIME endpoint */
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index d5468a7f38e..b62b2640deb 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -325,7 +325,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
/*
* Ensure that updates to the QH will
- * occure before priming.
+ * occur before priming.
*/
wmb();
@@ -338,7 +338,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
& EP_QUEUE_HEAD_NEXT_POINTER_MASK;;
dqh->size_ioc_int_sts = 0;
- /* Ensure that updates to the QH will occure before priming. */
+ /* Ensure that updates to the QH will occur before priming. */
wmb();
/* Prime the Endpoint */
@@ -1845,7 +1845,7 @@ static irqreturn_t mv_udc_irq(int irq, void *dev)
return IRQ_NONE;
}
- /* Clear all the interrupts occured */
+ /* Clear all the interrupts occurred */
writel(status, &udc->op_regs->usbsts);
if (status & USBSTS_ERR)
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index d09155b25d7..24696f7fa6a 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -117,7 +117,7 @@ module_param (fifo_mode, ushort, 0644);
/* enable_suspend -- When enabled, the driver will respond to
* USB suspend requests by powering down the NET2280. Otherwise,
- * USB suspend requests will be ignored. This is acceptible for
+ * USB suspend requests will be ignored. This is acceptable for
* self-powered devices
*/
static int enable_suspend = 0;
diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c
index b5364f9d7cd..55ca63ad350 100644
--- a/drivers/usb/gadget/nokia.c
+++ b/drivers/usb/gadget/nokia.c
@@ -203,7 +203,7 @@ static int __init nokia_bind(struct usb_composite_dev *cdev)
goto err_usb;
}
- /* finaly register the configuration */
+ /* finally register the configuration */
status = usb_add_config(cdev, &nokia_config_500ma_driver,
nokia_bind_config);
if (status < 0)
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 12ff6cffedc..c3f2bd42bd5 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -126,7 +126,7 @@ static struct printer_dev usb_printer_gadget;
#define PRINTER_VENDOR_NUM 0x0525 /* NetChip */
#define PRINTER_PRODUCT_NUM 0xa4a8 /* Linux-USB Printer Gadget */
-/* Some systems will want different product identifers published in the
+/* Some systems will want different product identifiers published in the
* device descriptor, either numbers or strings or both. These string
* parameters are in UTF-8 (superset of ASCII's 7 bit characters).
*/
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 2efd6732d13..78a39a41547 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -602,7 +602,7 @@ static void inc_ep_stats_reqs(struct pxa_ep *ep, int is_in)
/**
* inc_ep_stats_bytes - Update ep stats counts
* @ep: physical endpoint
- * @count: bytes transfered on endpoint
+ * @count: bytes transferred on endpoint
* @is_in: ep direction (USB_DIR_IN or 0)
*/
static void inc_ep_stats_bytes(struct pxa_ep *ep, int count, int is_in)
@@ -877,7 +877,7 @@ static void nuke(struct pxa_ep *ep, int status)
* If there is less space in request than bytes received in OUT endpoint,
* bytes are left in the OUT endpoint.
*
- * Returns how many bytes were actually transfered
+ * Returns how many bytes were actually transferred
*/
static int read_packet(struct pxa_ep *ep, struct pxa27x_request *req)
{
@@ -914,7 +914,7 @@ static int read_packet(struct pxa_ep *ep, struct pxa27x_request *req)
* endpoint. If there are no bytes to transfer, doesn't write anything
* to physical endpoint.
*
- * Returns how many bytes were actually transfered.
+ * Returns how many bytes were actually transferred.
*/
static int write_packet(struct pxa_ep *ep, struct pxa27x_request *req,
unsigned int max)
@@ -991,7 +991,7 @@ static int read_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
* caller guarantees at least one packet buffer is ready (or a zlp).
* Doesn't complete the request, that's the caller's job
*
- * Returns 1 if request fully transfered, 0 if partial transfer
+ * Returns 1 if request fully transferred, 0 if partial transfer
*/
static int write_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
{
@@ -1094,7 +1094,7 @@ static int read_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
* Sends a request (or a part of the request) to the control endpoint (ep0 in).
* If the request doesn't fit, the remaining part will be sent from irq.
* The request is considered fully written only if either :
- * - last write transfered all remaining bytes, but fifo was not fully filled
+ * - last write transferred all remaining bytes, but fifo was not fully filled
* - last write was a 0 length write
*
* Returns 1 if request fully written, 0 if request only partially sent
@@ -1548,7 +1548,7 @@ static int pxa_udc_get_frame(struct usb_gadget *_gadget)
* pxa_udc_wakeup - Force udc device out of suspend
* @_gadget: usb gadget
*
- * Returns 0 if successfull, error code otherwise
+ * Returns 0 if successful, error code otherwise
*/
static int pxa_udc_wakeup(struct usb_gadget *_gadget)
{
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index ef825c3baed..0912679de99 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -41,8 +41,8 @@
/* EP0_MPS_LIMIT
*
* Unfortunately there seems to be a limit of the amount of data that can
- * be transfered by IN transactions on EP0. This is either 127 bytes or 3
- * packets (which practially means 1 packet and 63 bytes of data) when the
+ * be transferred by IN transactions on EP0. This is either 127 bytes or 3
+ * packets (which practically means 1 packet and 63 bytes of data) when the
* MPS is set to 64.
*
* This means if we are wanting to move >127 bytes of data, we need to
@@ -783,7 +783,7 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
hsotg->regs + S3C_DIEPINT(index));
/* Note, trying to clear the NAK here causes problems with transmit
- * on the S3C6400 ending up with the TXFIFO becomming full. */
+ * on the S3C6400 ending up with the TXFIFO becoming full. */
/* check ep is enabled */
if (!(readl(hsotg->regs + epctrl_reg) & S3C_DxEPCTL_EPEna))
@@ -1176,10 +1176,10 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg,
writel(ctrl, hsotg->regs + reg);
dev_dbg(hsotg->dev,
- "writen DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n",
+ "written DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n",
ctrl, reg, readl(hsotg->regs + reg));
- /* don't belive we need to anything more to get the EP
+ /* don't believe we need to anything more to get the EP
* to reply with a STALL packet */
}
}
@@ -1416,7 +1416,7 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
* transaction.
*
* Note, since we don't write any data to the TxFIFO, then it is
- * currently belived that we do not need to wait for any space in
+ * currently believed that we do not need to wait for any space in
* the TxFIFO.
*/
static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg,
@@ -1540,7 +1540,7 @@ static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg)
* that requires processing, so find out what is in there and do the
* appropriate read.
*
- * The RXFIFO is a true FIFO, the packets comming out are still in packet
+ * The RXFIFO is a true FIFO, the packets coming out are still in packet
* chunks, so if you have x packets received on an endpoint you'll get x
* FIFO events delivered, each with a packet's worth of data in it.
*
@@ -2188,7 +2188,7 @@ irq_retry:
/* these next two seem to crop-up occasionally causing the core
* to shutdown the USB transfer, so try clearing them and logging
- * the occurence. */
+ * the occurrence. */
if (gintsts & S3C_GINTSTS_GOUTNakEff) {
dev_info(hsotg->dev, "GOUTNakEff triggered\n");
@@ -2469,7 +2469,7 @@ static struct usb_ep_ops s3c_hsotg_ep_ops = {
.queue = s3c_hsotg_ep_queue,
.dequeue = s3c_hsotg_ep_dequeue,
.set_halt = s3c_hsotg_ep_sethalt,
- /* note, don't belive we have any call for the fifo routines */
+ /* note, don't believe we have any call for the fifo routines */
};
/**
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 9483acdf2e9..e0e0787b724 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -402,7 +402,7 @@ config FHCI_DEBUG
depends on USB_FHCI_HCD && DEBUG_FS
help
Say "y" to see some FHCI debug information and statistics
- throught debugfs.
+ through debugfs.
config USB_U132_HCD
tristate "Elan U132 Adapter Host Controller"
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index f86d3fa2021..333ddc15691 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -644,7 +644,7 @@ static inline void ehci_writel(const struct ehci_hcd *ehci,
/*
* On certain ppc-44x SoC there is a HW issue, that could only worked around with
* explicit suspend/operate of OHCI. This function hereby makes sense only on that arch.
- * Other common bits are dependant on has_amcc_usb23 quirk flag.
+ * Other common bits are dependent on has_amcc_usb23 quirk flag.
*/
#ifdef CONFIG_44x
static inline void set_ohci_hcfs(struct ehci_hcd *ehci, int operational)
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index b84ff7e5189..19223c7449e 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -401,7 +401,7 @@ static int fhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
/* 1 td fro setup,1 for ack */
size = 2;
case PIPE_BULK:
- /* one td for every 4096 bytes(can be upto 8k) */
+ /* one td for every 4096 bytes(can be up to 8k) */
size += urb->transfer_buffer_length / 4096;
/* ...add for any remaining bytes... */
if ((urb->transfer_buffer_length % 4096) != 0)
diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c
index 38fe058fbe6..0ea577bfca2 100644
--- a/drivers/usb/host/fhci-tds.c
+++ b/drivers/usb/host/fhci-tds.c
@@ -40,7 +40,7 @@
#define TD_RXER 0x0020 /* Rx error or not */
#define TD_NAK 0x0010 /* No ack. */
-#define TD_STAL 0x0008 /* Stall recieved */
+#define TD_STAL 0x0008 /* Stall received */
#define TD_TO 0x0004 /* time out */
#define TD_UN 0x0002 /* underrun */
#define TD_NO 0x0010 /* Rx Non Octet Aligned Packet */
@@ -274,7 +274,7 @@ void fhci_init_ep_registers(struct fhci_usb *usb, struct endpoint *ep,
* It is also preparing the TDs for new frames. If the Tx interrupts
* are disabled, the application should call that routine to get
* confirmation about the submitted frames. Otherwise, the routine is
- * called frome the interrupt service routine during the Tx interrupt.
+ * called from the interrupt service routine during the Tx interrupt.
* In that case the application is informed by calling the application
* specific 'fhci_transaction_confirm' routine
*/
@@ -337,7 +337,7 @@ static void fhci_td_transaction_confirm(struct fhci_usb *usb)
pkt->status = USB_TD_RX_ER_NONOCT;
else
fhci_err(usb->fhci, "illegal error "
- "occured\n");
+ "occurred\n");
} else if (td_status & TD_NAK)
pkt->status = USB_TD_TX_ER_NAK;
else if (td_status & TD_TO)
@@ -347,7 +347,7 @@ static void fhci_td_transaction_confirm(struct fhci_usb *usb)
else if (td_status & TD_STAL)
pkt->status = USB_TD_TX_ER_STALL;
else
- fhci_err(usb->fhci, "illegal error occured\n");
+ fhci_err(usb->fhci, "illegal error occurred\n");
} else if ((extra_data & TD_TOK_IN) &&
pkt->len > td_length - CRC_SIZE) {
pkt->status = USB_TD_RX_DATA_UNDERUN;
diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h
index 71c3caaea4c..dc6939a44a1 100644
--- a/drivers/usb/host/fhci.h
+++ b/drivers/usb/host/fhci.h
@@ -82,7 +82,7 @@
#define USB_TD_RX_ER_NONOCT 0x40000000 /* Tx Non Octet Aligned Packet */
#define USB_TD_RX_ER_BITSTUFF 0x20000000 /* Frame Aborted-Received pkt */
#define USB_TD_RX_ER_CRC 0x10000000 /* CRC error */
-#define USB_TD_RX_ER_OVERUN 0x08000000 /* Over - run occured */
+#define USB_TD_RX_ER_OVERUN 0x08000000 /* Over - run occurred */
#define USB_TD_RX_ER_PID 0x04000000 /* wrong PID received */
#define USB_TD_RX_DATA_UNDERUN 0x02000000 /* shorter than expected */
#define USB_TD_RX_DATA_OVERUN 0x01000000 /* longer than expected */
@@ -363,7 +363,7 @@ struct ed {
struct td {
void *data; /* a pointer to the data buffer */
unsigned int len; /* length of the data to be submitted */
- unsigned int actual_len; /* actual bytes transfered on this td */
+ unsigned int actual_len; /* actual bytes transferred on this td */
enum fhci_ta_type type; /* transaction type */
u8 toggle; /* toggle for next trans. within this TD */
u16 iso_index; /* ISO transaction index */
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index 2562e92e317..af05718bdc7 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -1323,7 +1323,7 @@ static void process_etds(struct usb_hcd *hcd, struct imx21 *imx21, int sof)
* (and hence no interrupt occurs).
* This causes the transfer in question to hang.
* The kludge below checks for this condition at each SOF and processes any
- * blocked ETDs (after an arbitary 10 frame wait)
+ * blocked ETDs (after an arbitrary 10 frame wait)
*
* With a single active transfer the usbtest test suite will run for days
* without the kludge.
diff --git a/drivers/usb/host/isp116x.h b/drivers/usb/host/isp116x.h
index 12db961acdf..9a2c400e609 100644
--- a/drivers/usb/host/isp116x.h
+++ b/drivers/usb/host/isp116x.h
@@ -13,7 +13,7 @@
/* Full speed: max # of bytes to transfer for a single urb
at a time must be < 1024 && must be multiple of 64.
- 832 allows transfering 4kiB within 5 frames. */
+ 832 allows transferring 4kiB within 5 frames. */
#define MAX_TRANSFER_SIZE_FULLSPEED 832
/* Low speed: there is no reason to schedule in very big
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 662cd002adf..f97570a847c 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -546,7 +546,7 @@ static void postproc_ep(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep *ep)
if (usb_pipecontrol(urb->pipe)) {
ep->nextpid = USB_PID_ACK;
/* save the data underrun error code for later and
- * procede with the status stage
+ * proceed with the status stage
*/
urb->actual_length += PTD_GET_COUNT(ptd);
BUG_ON(urb->actual_length > urb->transfer_buffer_length);
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index e7288639edb..d5572351486 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -162,7 +162,7 @@ static int ohci_urb_enqueue (
// case PIPE_INTERRUPT:
// case PIPE_BULK:
default:
- /* one TD for every 4096 Bytes (can be upto 8K) */
+ /* one TD for every 4096 Bytes (can be up to 8K) */
size += urb->transfer_buffer_length / 4096;
/* ... and for any remaining bytes ... */
if ((urb->transfer_buffer_length % 4096) != 0)
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 44e4deb362e..4a771f6cc82 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -2879,7 +2879,7 @@ static int oxu_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
/* Ok, we have more job to do! :) */
for (i = 0; i < num - 1; i++) {
- /* Get free micro URB poll till a free urb is recieved */
+ /* Get free micro URB poll till a free urb is received */
do {
murb = (struct urb *) oxu_murb_alloc(oxu);
@@ -2911,7 +2911,7 @@ static int oxu_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
/* Last urb requires special handling */
- /* Get free micro URB poll till a free urb is recieved */
+ /* Get free micro URB poll till a free urb is received */
do {
murb = (struct urb *) oxu_murb_alloc(oxu);
if (!murb)
diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c
index dc0ab8382f5..d6e17542861 100644
--- a/drivers/usb/host/whci/qset.c
+++ b/drivers/usb/host/whci/qset.c
@@ -739,7 +739,7 @@ static int get_urb_status_from_qtd(struct urb *urb, u32 status)
* process_inactive_qtd - process an inactive (but not halted) qTD.
*
* Update the urb with the transfer bytes from the qTD, if the urb is
- * completely transfered or (in the case of an IN only) the LPF is
+ * completely transferred or (in the case of an IN only) the LPF is
* set, then the transfer is complete and the urb should be returned
* to the system.
*/
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 9a3645fd759..196e0181b2e 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -741,7 +741,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
int retval;
/* Wait a bit if either of the roothubs need to settle from the
- * transistion into bus suspend.
+ * transition into bus suspend.
*/
if (time_before(jiffies, xhci->bus_state[0].next_statechange) ||
time_before(jiffies,
@@ -2072,7 +2072,7 @@ int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
return -EINVAL;
}
vdev = xhci->devs[udev->slot_id];
- /* Mark each endpoint as being in transistion, so
+ /* Mark each endpoint as being in transition, so
* xhci_urb_enqueue() will reject all URBs.
*/
for (i = 0; i < num_eps; i++) {
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 711de253bc0..07e263063e3 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -873,7 +873,7 @@ struct xhci_transfer_event {
#define COMP_CMD_ABORT 25
/* Stopped - transfer was terminated by a stop endpoint command */
#define COMP_STOP 26
-/* Same as COMP_EP_STOPPED, but the transfered length in the event is invalid */
+/* Same as COMP_EP_STOPPED, but the transferred length in the event is invalid */
#define COMP_STOP_INVAL 27
/* Control Abort Error - Debug Capability - control pipe aborted */
#define COMP_DBG_ABORT 28
diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c
index c90c89dc000..a0037961e5b 100644
--- a/drivers/usb/image/microtek.c
+++ b/drivers/usb/image/microtek.c
@@ -69,7 +69,7 @@
* 20000513 added IDs for all products supported by Windows driver (john)
* 20000514 Rewrote mts_scsi_queuecommand to use URBs (john)
* 20000514 Version 0.0.8j
- * 20000514 Fix reporting of non-existant devices to SCSI layer (john)
+ * 20000514 Fix reporting of non-existent devices to SCSI layer (john)
* 20000514 Added MTS_DEBUG_INT (john)
* 20000514 Changed "usb-microtek" to "microtek" for consistency (john)
* 20000514 Stupid bug fixes (john)
@@ -557,14 +557,14 @@ mts_build_transfer_context(struct scsi_cmnd *srb, struct mts_desc* desc)
if ( !memcmp( srb->cmnd, mts_read_image_sig, mts_read_image_sig_len )
) { pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_image);
- MTS_DEBUG( "transfering from desc->ep_image == %d\n",
+ MTS_DEBUG( "transferring from desc->ep_image == %d\n",
(int)desc->ep_image );
} else if ( MTS_DIRECTION_IS_IN(srb->cmnd[0]) ) {
pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_response);
- MTS_DEBUG( "transfering from desc->ep_response == %d\n",
+ MTS_DEBUG( "transferring from desc->ep_response == %d\n",
(int)desc->ep_response);
} else {
- MTS_DEBUG("transfering to desc->ep_out == %d\n",
+ MTS_DEBUG("transferring to desc->ep_out == %d\n",
(int)desc->ep_out);
pipe = usb_sndbulkpipe(desc->usb_dev,desc->ep_out);
}
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index e573e470401..a2190b983f5 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -40,7 +40,7 @@
#ifdef CONFIG_USB_DYNAMIC_MINORS
#define IOWARRIOR_MINOR_BASE 0
#else
-#define IOWARRIOR_MINOR_BASE 208 // SKELETON_MINOR_BASE 192 + 16, not offical yet
+#define IOWARRIOR_MINOR_BASE 208 // SKELETON_MINOR_BASE 192 + 16, not official yet
#endif
/* interrupt input queue size */
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index 8c6fdef61d1..e25700f44b6 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -1531,7 +1531,7 @@ isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
i2c_set_clientdata(i2c, isp);
isp->client = i2c;
- /* verify the chip (shouldn't be necesary) */
+ /* verify the chip (shouldn't be necessary) */
status = isp1301_get_u16(isp, ISP1301_VENDOR_ID);
if (status != I2C_VENDOR_ID_PHILIPS) {
dev_dbg(&i2c->dev, "not philips id: %d\n", status);
diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c
index 7f9b8cd4514..e973ff19c55 100644
--- a/drivers/usb/otg/langwell_otg.c
+++ b/drivers/usb/otg/langwell_otg.c
@@ -580,7 +580,7 @@ static void langwell_otg_add_ktimer(enum langwell_otg_timer_type timers)
time = TB_BUS_SUSPEND;
break;
default:
- dev_dbg(lnw->dev, "unkown timer, cannot enable it\n");
+ dev_dbg(lnw->dev, "unknown timer, cannot enable it\n");
return;
}
@@ -1381,7 +1381,7 @@ static void langwell_otg_work(struct work_struct *work)
} else if (!iotg->hsm.a_bus_req && iotg->otg.host &&
iotg->otg.host->b_hnp_enable) {
/* It is not safe enough to do a fast
- * transistion from A_WAIT_BCON to
+ * transition from A_WAIT_BCON to
* A_SUSPEND */
msleep(10000);
if (iotg->hsm.a_bus_req)
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 0db6ace16f7..aba201cb872 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -16,7 +16,7 @@
* When reading the process is almost equal except that the header starts with
* 0x00 0x20.
*
- * The device simply need some stuff to understand data comming from the usb
+ * The device simply need some stuff to understand data coming from the usb
* buffer: The First and Second byte is used for a Header, the Third and Fourth
* tells the device the amount of information the package holds.
* Packages are 60 bytes long Header Stuff.
@@ -30,7 +30,7 @@
* one.
*
* The driver registers himself with the USB-serial core and the USB Core. I had
- * to implement a probe function agains USB-serial, because other way, the
+ * to implement a probe function against USB-serial, because other way, the
* driver was attaching himself to both interfaces. I have tryed with different
* configurations of usb_serial_driver with out exit, only the probe function
* could handle this correctly.
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 4df3e0cecba..0f11afdda13 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -101,7 +101,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
{ USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
- { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */
+ { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */
{ USB_DEVICE(0x10C4, 0x8293) }, /* Telegesys ETRX2USB */
{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 987e9bf7bd0..d9906eb9d16 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -35,7 +35,7 @@
*
* Lonnie Mendez <dignome@gmail.com>
* 04-10-2004
- * Driver modified to support dynamic line settings. Various improvments
+ * Driver modified to support dynamic line settings. Various improvements
* and features.
*
* Neil Whelchel
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 65967b36365..a973c7a29d6 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -17,7 +17,7 @@
* See Documentation/usb/usb-serial.txt for more information on using this
* driver
*
- * See http://ftdi-usb-sio.sourceforge.net for upto date testing info
+ * See http://ftdi-usb-sio.sourceforge.net for up to date testing info
* and extra documentation
*
* Change entries from 2004 and earlier can be found in versions of this
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index f1aedfa7c42..abf095be575 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -1981,7 +1981,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
if (code == IOSP_STATUS_OPEN_RSP) {
edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3);
edge_port->maxTxCredits = edge_port->txCredits;
- dbg("%s - Port %u Open Response Inital MSR = %02x TxBufferSize = %d", __func__, edge_serial->rxPort, byte2, edge_port->txCredits);
+ dbg("%s - Port %u Open Response Initial MSR = %02x TxBufferSize = %d", __func__, edge_serial->rxPort, byte2, edge_port->txCredits);
handle_new_msr(edge_port, byte2);
/* send the current line settings to the port so we are
diff --git a/drivers/usb/serial/io_edgeport.h b/drivers/usb/serial/io_edgeport.h
index dced7ec6547..ad9c1d47a61 100644
--- a/drivers/usb/serial/io_edgeport.h
+++ b/drivers/usb/serial/io_edgeport.h
@@ -68,7 +68,7 @@ struct comMapper {
#define PROC_SET_COM_ENTRY 2
-/* The following sturcture is passed to the write */
+/* The following structure is passed to the write */
struct procWrite {
int Command;
union {
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index d8434910fa7..0aac00afb5c 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -433,7 +433,7 @@ static int write_i2c_mem(struct edgeport_serial *serial,
/* We can only send a maximum of 1 aligned byte page at a time */
- /* calulate the number of bytes left in the first page */
+ /* calculate the number of bytes left in the first page */
write_length = EPROM_PAGE_SIZE -
(start_address & (EPROM_PAGE_SIZE - 1));
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 201f6096844..a6f63cc8c13 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -116,7 +116,7 @@ static void opticon_read_bulk_callback(struct urb *urb)
} else {
if ((data[0] == 0x00) && (data[1] == 0x01)) {
spin_lock_irqsave(&priv->lock, flags);
- /* CTS status infomation package */
+ /* CTS status information package */
if (data[2] == 0x00)
priv->cts = false;
else
diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c
index 08e03745e25..0e5aafda453 100644
--- a/drivers/usb/storage/ene_ub6250.c
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -562,7 +562,7 @@ static int ene_sd_init(struct us_data *us)
result = ene_send_scsi_cmd(us, FDIR_READ, NULL, 0);
if (result != USB_STOR_XFER_GOOD) {
- US_DEBUGP("Exection SD Init Code Fail !!\n");
+ US_DEBUGP("Execution SD Init Code Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
@@ -581,7 +581,7 @@ static int ene_sd_init(struct us_data *us)
result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0);
if (result != USB_STOR_XFER_GOOD) {
- US_DEBUGP("Exection SD Init Code Fail !!\n");
+ US_DEBUGP("Execution SD Init Code Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index 6b9982cd542..09e52ba47dd 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -1510,7 +1510,7 @@ static int isd200_Initialization(struct us_data *us)
* Protocol and Transport for the ISD200 ASIC
*
* This protocol and transport are for ATA devices connected to an ISD200
- * ASIC. An ATAPI device that is conected as a slave device will be
+ * ASIC. An ATAPI device that is connected as a slave device will be
* detected in the driver initialization function and the protocol will
* be changed to an ATAPI protocol (Transparent SCSI).
*
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 689ee1fb702..13b8bcdf3db 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -123,7 +123,7 @@ static int slave_configure(struct scsi_device *sdev)
{
struct us_data *us = host_to_us(sdev->host);
- /* Many devices have trouble transfering more than 32KB at a time,
+ /* Many devices have trouble transferring more than 32KB at a time,
* while others have trouble with more than 64K. At this time we
* are limiting both to 32K (64 sectores).
*/
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index bd3f415893d..0b00091d2ae 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -340,7 +340,7 @@ static int usbat_check_status(struct us_data *us)
}
/*
- * Stores critical information in internal registers in prepartion for the execution
+ * Stores critical information in internal registers in preparation for the execution
* of a conditional usbat_read_blocks or usbat_write_blocks call.
*/
static int usbat_set_shuttle_features(struct us_data *us,
diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/usb/wusbcore/crypto.c
index 827c87f10cc..7e4bf95f8f7 100644
--- a/drivers/usb/wusbcore/crypto.c
+++ b/drivers/usb/wusbcore/crypto.c
@@ -180,7 +180,7 @@ static void bytewise_xor(void *_bo, const void *_bi1, const void *_bi2,
* using the 14 bytes of @a to fill up
* b1.{mac_header,e0,security_reserved,padding}.
*
- * NOTE: The definiton of l(a) in WUSB1.0[6.5] vs the definition of
+ * NOTE: The definition of l(a) in WUSB1.0[6.5] vs the definition of
* l(m) is orthogonal, they bear no relationship, so it is not
* in conflict with the parameter's relation that
* WUSB1.0[6.4.2]) defines.
@@ -272,7 +272,7 @@ static int wusb_ccm_mac(struct crypto_blkcipher *tfm_cbc,
/* Now we crypt the MIC Tag (*iv) with Ax -- values per WUSB1.0[6.5]
* The procedure is to AES crypt the A0 block and XOR the MIC
- * Tag agains it; we only do the first 8 bytes and place it
+ * Tag against it; we only do the first 8 bytes and place it
* directly in the destination buffer.
*
* POS Crypto API: size is assumed to be AES's block size.
diff --git a/drivers/usb/wusbcore/reservation.c b/drivers/usb/wusbcore/reservation.c
index 4ed97360c04..6f4fafdc240 100644
--- a/drivers/usb/wusbcore/reservation.c
+++ b/drivers/usb/wusbcore/reservation.c
@@ -71,7 +71,7 @@ static void wusbhc_rsv_complete_cb(struct uwb_rsv *rsv)
/**
* wusbhc_rsv_establish - establish a reservation for the cluster
- * @wusbhc: the WUSB HC requesting a bandwith reservation
+ * @wusbhc: the WUSB HC requesting a bandwidth reservation
*/
int wusbhc_rsv_establish(struct wusbhc *wusbhc)
{
diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c
index c175b7300c7..39de3900ad2 100644
--- a/drivers/usb/wusbcore/rh.c
+++ b/drivers/usb/wusbcore/rh.c
@@ -133,7 +133,7 @@ static int wusbhc_rh_port_reset(struct wusbhc *wusbhc, u8 port_idx)
* big of a problem [and we can't make it an spinlock
* because other parts need to take it and sleep] .
*
- * @usb_hcd is refcounted, so it won't dissapear under us
+ * @usb_hcd is refcounted, so it won't disappear under us
* and before killing a host, the polling of the root hub
* would be stopped anyway.
*/
diff --git a/drivers/usb/wusbcore/wa-rpipe.c b/drivers/usb/wusbcore/wa-rpipe.c
index 8cb9d80207f..ca80171f42c 100644
--- a/drivers/usb/wusbcore/wa-rpipe.c
+++ b/drivers/usb/wusbcore/wa-rpipe.c
@@ -24,7 +24,7 @@
*
* RPIPE
*
- * Targetted at different downstream endpoints
+ * Targeted at different downstream endpoints
*
* Descriptor: use to config the remote pipe.
*
diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
index 84b744c428a..6ccd93a9b90 100644
--- a/drivers/usb/wusbcore/wa-xfer.c
+++ b/drivers/usb/wusbcore/wa-xfer.c
@@ -61,7 +61,7 @@
*
* Two methods it could be done:
*
- * (a) set up a timer everytime an rpipe's use count drops to 1
+ * (a) set up a timer every time an rpipe's use count drops to 1
* (which means unused) or when a transfer ends. Reset the
* timer when a xfer is queued. If the timer expires, release
* the rpipe [see rpipe_ep_disable()].
@@ -140,7 +140,7 @@ struct wa_xfer {
struct wahc *wa; /* Wire adapter we are plugged to */
struct usb_host_endpoint *ep;
- struct urb *urb; /* URB we are transfering for */
+ struct urb *urb; /* URB we are transferring for */
struct wa_seg **seg; /* transfer segments */
u8 segs, segs_submitted, segs_done;
unsigned is_inbound:1;
@@ -161,7 +161,7 @@ static inline void wa_xfer_init(struct wa_xfer *xfer)
}
/*
- * Destory a transfer structure
+ * Destroy a transfer structure
*
* Note that the xfer->seg[index] thingies follow the URB life cycle,
* so we need to put them, not free them.
@@ -494,7 +494,7 @@ static void __wa_xfer_setup_hdr0(struct wa_xfer *xfer,
* function does almost the same thing and they work closely
* together.
*
- * If the seg request has failed but this DTO phase has suceeded,
+ * If the seg request has failed but this DTO phase has succeeded,
* wa_seg_cb() has already failed the segment and moved the
* status to WA_SEG_ERROR, so this will go through 'case 0' and
* effectively do nothing.
diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h
index 6bd426b7ec0..3a2d09162e7 100644
--- a/drivers/usb/wusbcore/wusbhc.h
+++ b/drivers/usb/wusbcore/wusbhc.h
@@ -231,7 +231,7 @@ struct wusb_port {
*
* Most of the times when you need to use it, it will be non-NULL,
* so there is no real need to check for it (wusb_dev will
- * dissapear before usb_dev).
+ * disappear before usb_dev).
*
* - The following fields need to be filled out before calling
* wusbhc_create(): ports_max, mmcies_max, mmcie_{add,rm}.