aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/tty
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/hvc/hvc_iucv.c4
-rw-r--r--drivers/tty/hvc/hvc_vio.c2
-rw-r--r--drivers/tty/hvc/hvcs.c8
-rw-r--r--drivers/tty/mxser.h2
-rw-r--r--drivers/tty/n_gsm.c10
-rw-r--r--drivers/tty/nozomi.c2
-rw-r--r--drivers/tty/rocket.c4
-rw-r--r--drivers/tty/serial/8250.c2
-rw-r--r--drivers/tty/serial/8250_pci.c2
-rw-r--r--drivers/tty/serial/amba-pl011.c2
-rw-r--r--drivers/tty/serial/icom.c2
-rw-r--r--drivers/tty/serial/imx.c2
-rw-r--r--drivers/tty/serial/ip22zilog.c2
-rw-r--r--drivers/tty/serial/jsm/jsm.h2
-rw-r--r--drivers/tty/serial/jsm/jsm_neo.c4
-rw-r--r--drivers/tty/serial/max3107.h2
-rw-r--r--drivers/tty/serial/mrst_max3110.c2
-rw-r--r--drivers/tty/serial/mrst_max3110.h2
-rw-r--r--drivers/tty/serial/msm_serial_hs.c4
-rw-r--r--drivers/tty/serial/omap-serial.c2
-rw-r--r--drivers/tty/serial/pmac_zilog.c6
-rw-r--r--drivers/tty/serial/samsung.c4
-rw-r--r--drivers/tty/serial/sh-sci.c2
-rw-r--r--drivers/tty/serial/sn_console.c4
-rw-r--r--drivers/tty/serial/sunzilog.c2
-rw-r--r--drivers/tty/synclink.c10
-rw-r--r--drivers/tty/synclink_gt.c2
-rw-r--r--drivers/tty/synclinkmp.c10
-rw-r--r--drivers/tty/tty_io.c8
-rw-r--r--drivers/tty/tty_ioctl.c6
-rw-r--r--drivers/tty/vt/vt.c2
31 files changed, 59 insertions, 59 deletions
diff --git a/drivers/tty/hvc/hvc_iucv.c b/drivers/tty/hvc/hvc_iucv.c
index c3425bb3a1f..b6f7d52f7c3 100644
--- a/drivers/tty/hvc/hvc_iucv.c
+++ b/drivers/tty/hvc/hvc_iucv.c
@@ -255,7 +255,7 @@ static int hvc_iucv_write(struct hvc_iucv_private *priv,
default:
written = -EIO;
}
- /* remove buffer if an error has occured or received data
+ /* remove buffer if an error has occurred or received data
* is not correct */
if (rc || (rb->mbuf->version != MSG_VERSION) ||
(rb->msg.length != MSG_SIZE(rb->mbuf->datalen)))
@@ -620,7 +620,7 @@ static void hvc_iucv_hangup(struct hvc_iucv_private *priv)
* the index of an struct hvc_iucv_private instance.
*
* This routine notifies the HVC back-end that a tty hangup (carrier loss,
- * virtual or otherwise) has occured.
+ * virtual or otherwise) has occurred.
* The z/VM IUCV HVC device driver ignores virtual hangups (vhangup())
* to keep an existing IUCV communication path established.
* (Background: vhangup() is called from user space (by getty or login) to
diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c
index 5e2f52b3332..e6eea148524 100644
--- a/drivers/tty/hvc/hvc_vio.c
+++ b/drivers/tty/hvc/hvc_vio.c
@@ -1,7 +1,7 @@
/*
* vio driver interface to hvc_console.c
*
- * This code was moved here to allow the remaing code to be reused as a
+ * This code was moved here to allow the remaining code to be reused as a
* generic polling mode with semi-reliable transport driver core to the
* console and tty subsystems.
*
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index bef238f9ffd..4c8b6654693 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -118,7 +118,7 @@
* arch/powerepc/include/asm/hvcserver.h
*
* 1.3.2 -> 1.3.3 Replaced yield() in hvcs_close() with tty_wait_until_sent() to
- * prevent possible lockup with realtime scheduling as similarily pointed out by
+ * prevent possible lockup with realtime scheduling as similarly pointed out by
* akpm in hvc_console. Changed resulted in the removal of hvcs_final_close()
* to reorder cleanup operations and prevent discarding of pending data during
* an hvcs_close(). Removed spinlock protection of hvcs_struct data members in
@@ -581,7 +581,7 @@ static void hvcs_try_write(struct hvcs_struct *hvcsd)
/*
* We are still obligated to deliver the data to the
* hypervisor even if the tty has been closed because
- * we commited to delivering it. But don't try to wake
+ * we committed to delivering it. But don't try to wake
* a non-existent tty.
*/
if (tty) {
@@ -1349,7 +1349,7 @@ static int hvcs_write(struct tty_struct *tty,
spin_lock_irqsave(&hvcsd->lock, flags);
/*
- * Somehow an open succedded but the device was removed or the
+ * Somehow an open succeeded but the device was removed or the
* connection terminated between the vty-server and partner vty during
* the middle of a write operation? This is a crummy place to do this
* but we want to keep it all in the spinlock.
@@ -1420,7 +1420,7 @@ static int hvcs_write(struct tty_struct *tty,
}
/*
- * This is really asking how much can we guarentee that we can send or that we
+ * This is really asking how much can we guarantee that we can send or that we
* absolutely WILL BUFFER if we can't send it. This driver MUST honor the
* return value, hence the reason for hvcs_struct buffering.
*/
diff --git a/drivers/tty/mxser.h b/drivers/tty/mxser.h
index 41878a69203..0bf794313ff 100644
--- a/drivers/tty/mxser.h
+++ b/drivers/tty/mxser.h
@@ -113,7 +113,7 @@
#define MOXA_MUST_IIR_RTO 0x0C
#define MOXA_MUST_IIR_LSR 0x06
-/* recieved Xon/Xoff or specical interrupt pending */
+/* received Xon/Xoff or specical interrupt pending */
#define MOXA_MUST_IIR_XSC 0x10
/* RTS/CTS change state interrupt pending */
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 176f63256b3..47f8cdb207f 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -74,7 +74,7 @@ module_param(debug, int, 0600);
#endif
/*
- * Semi-arbitary buffer size limits. 0710 is normally run with 32-64 byte
+ * Semi-arbitrary buffer size limits. 0710 is normally run with 32-64 byte
* limits so this is plenty
*/
#define MAX_MRU 512
@@ -82,7 +82,7 @@ module_param(debug, int, 0600);
/*
* Each block of data we have queued to go out is in the form of
- * a gsm_msg which holds everything we need in a link layer independant
+ * a gsm_msg which holds everything we need in a link layer independent
* format
*/
@@ -1193,8 +1193,8 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command,
break;
/* Optional unsupported commands */
case CMD_PN: /* Parameter negotiation */
- case CMD_RPN: /* Remote port negotation */
- case CMD_SNC: /* Service negotation command */
+ case CMD_RPN: /* Remote port negotiation */
+ case CMD_SNC: /* Service negotiation command */
default:
/* Reply to bad commands with an NSC */
buf[0] = command;
@@ -2026,7 +2026,7 @@ EXPORT_SYMBOL_GPL(gsm_activate_mux);
* @mux: mux to free
*
* Dispose of allocated resources for a dead mux. No refcounting
- * at present so the mux must be truely dead.
+ * at present so the mux must be truly dead.
*/
void gsm_free_mux(struct gsm_mux *gsm)
{
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index f4f11164efe..fd0a98524d5 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -1673,7 +1673,7 @@ static void ntty_hangup(struct tty_struct *tty)
/*
* called when the userspace process writes to the tty (/dev/noz*).
- * Data is inserted into a fifo, which is then read and transfered to the modem.
+ * Data is inserted into a fifo, which is then read and transferred to the modem.
*/
static int ntty_write(struct tty_struct *tty, const unsigned char *buffer,
int count)
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index 3780da8ad12..036feeb5e3f 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -2060,7 +2060,7 @@ static __init int register_PCI(int i, struct pci_dev *dev)
sClockPrescale = 0x19;
rp_baud_base[i] = 230400;
} else {
- /* mod 4 (devide by 5) prescale */
+ /* mod 4 (divide by 5) prescale */
sClockPrescale = 0x14;
rp_baud_base[i] = 460800;
}
@@ -2183,7 +2183,7 @@ static int __init init_ISA(int i)
sClockPrescale = 0x19; /* mod 9 (divide by 10) prescale */
rp_baud_base[i] = 230400;
} else {
- sClockPrescale = 0x14; /* mod 4 (devide by 5) prescale */
+ sClockPrescale = 0x14; /* mod 4 (divide by 5) prescale */
rp_baud_base[i] = 460800;
}
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index b3b881bc471..6611535f444 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -1629,7 +1629,7 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
up->port.iotype == UPIO_DWAPB32) &&
(iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
/* The DesignWare APB UART has an Busy Detect (0x07)
- * interrupt meaning an LCR write attempt occured while the
+ * interrupt meaning an LCR write attempt occurred while the
* UART was busy. The interrupt must be cleared by reading
* the UART status register (USR) and the LCR re-written. */
unsigned int status;
diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c
index 8b8930f700b..738cec9807d 100644
--- a/drivers/tty/serial/8250_pci.c
+++ b/drivers/tty/serial/8250_pci.c
@@ -433,7 +433,7 @@ static void __devexit sbs_exit(struct pci_dev *dev)
/*
* SIIG serial cards have an PCI interface chip which also controls
* the UART clocking frequency. Each UART can be clocked independently
- * (except cards equiped with 4 UARTs) and initial clocking settings
+ * (except cards equipped with 4 UARTs) and initial clocking settings
* are stored in the EEPROM chip. It can cause problems because this
* version of serial driver doesn't support differently clocked UART's
* on single PCI card. To prevent this, initialization functions set
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 57731e87008..6deee4e546b 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -520,7 +520,7 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap)
/*
* We don't have a TX buffer queued, so try to queue one.
- * If we succesfully queued a buffer, mask the TX IRQ.
+ * If we successfully queued a buffer, mask the TX IRQ.
*/
if (pl011_dma_tx_refill(uap) > 0) {
uap->im &= ~UART011_TXIM;
diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c
index 53a46822705..8a869e58f6d 100644
--- a/drivers/tty/serial/icom.c
+++ b/drivers/tty/serial/icom.c
@@ -1248,7 +1248,7 @@ static void icom_set_termios(struct uart_port *port,
}
}
- /* Enable Transmitter and Reciever */
+ /* Enable Transmitter and Receiver */
offset =
(unsigned long) &ICOM_PORT->statStg->rcv[0] -
(unsigned long) ICOM_PORT->statStg;
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index dfcf4b1878a..cb36b0d4ef3 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -78,7 +78,7 @@
#define URXD_FRMERR (1<<12)
#define URXD_BRK (1<<11)
#define URXD_PRERR (1<<10)
-#define UCR1_ADEN (1<<15) /* Auto dectect interrupt */
+#define UCR1_ADEN (1<<15) /* Auto detect interrupt */
#define UCR1_ADBR (1<<14) /* Auto detect baud rate */
#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */
#define UCR1_IDEN (1<<12) /* Idle condition interrupt */
diff --git a/drivers/tty/serial/ip22zilog.c b/drivers/tty/serial/ip22zilog.c
index ebff4a1d4bc..7b1cda59ebb 100644
--- a/drivers/tty/serial/ip22zilog.c
+++ b/drivers/tty/serial/ip22zilog.c
@@ -375,7 +375,7 @@ static void ip22zilog_transmit_chars(struct uart_ip22zilog_port *up,
* be nice to transmit console writes just like we normally would for
* a TTY line. (ie. buffered and TX interrupt driven). That is not
* easy because console writes cannot sleep. One solution might be
- * to poll on enough port->xmit space becomming free. -DaveM
+ * to poll on enough port->xmit space becoming free. -DaveM
*/
if (!(status & Tx_BUF_EMP))
return;
diff --git a/drivers/tty/serial/jsm/jsm.h b/drivers/tty/serial/jsm/jsm.h
index 38a509c684c..b704c8ce0d7 100644
--- a/drivers/tty/serial/jsm/jsm.h
+++ b/drivers/tty/serial/jsm/jsm.h
@@ -273,7 +273,7 @@ struct neo_uart_struct {
u8 fctr; /* WR FCTR - Feature Control Reg */
u8 efr; /* WR EFR - Enhanced Function Reg */
u8 tfifo; /* WR TXCNT/TXTRG - Transmit FIFO Reg */
- u8 rfifo; /* WR RXCNT/RXTRG - Recieve FIFO Reg */
+ u8 rfifo; /* WR RXCNT/RXTRG - Receive FIFO Reg */
u8 xoffchar1; /* WR XOFF 1 - XOff Character 1 Reg */
u8 xoffchar2; /* WR XOFF 2 - XOff Character 2 Reg */
u8 xonchar1; /* WR XON 1 - Xon Character 1 Reg */
diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c
index 7960d9633c1..4538c3e3646 100644
--- a/drivers/tty/serial/jsm/jsm_neo.c
+++ b/drivers/tty/serial/jsm/jsm_neo.c
@@ -381,7 +381,7 @@ static void neo_copy_data_from_uart_to_queue(struct jsm_channel *ch)
/* Copy data from uart to the queue */
memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, n);
/*
- * Since RX_FIFO_DATA_ERROR was 0, we are guarenteed
+ * Since RX_FIFO_DATA_ERROR was 0, we are guaranteed
* that all the data currently in the FIFO is free of
* breaks and parity/frame/orun errors.
*/
@@ -1210,7 +1210,7 @@ static irqreturn_t neo_intr(int irq, void *voidbrd)
* Why would I check EVERY possibility of type of
* interrupt, when we know its TXRDY???
* Becuz for some reason, even tho we got triggered for TXRDY,
- * it seems to be occassionally wrong. Instead of TX, which
+ * it seems to be occasionally wrong. Instead of TX, which
* it should be, I was getting things like RXDY too. Weird.
*/
neo_parse_isr(brd, port);
diff --git a/drivers/tty/serial/max3107.h b/drivers/tty/serial/max3107.h
index 7ab63239250..8415fc723b9 100644
--- a/drivers/tty/serial/max3107.h
+++ b/drivers/tty/serial/max3107.h
@@ -369,7 +369,7 @@ struct max3107_port {
struct spi_device *spi;
#if defined(CONFIG_GPIOLIB)
- /* GPIO chip stucture */
+ /* GPIO chip structure */
struct gpio_chip chip;
#endif
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index 37e13c3d91d..2f548af4e98 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -23,7 +23,7 @@
* 1 word. If SPI master controller doesn't support sclk frequency change,
* then the char need be sent out one by one with some delay
*
- * 2. Currently only RX availabe interrrupt is used, no need for waiting TXE
+ * 2. Currently only RX available interrrupt is used, no need for waiting TXE
* interrupt for a low speed UART device
*/
diff --git a/drivers/tty/serial/mrst_max3110.h b/drivers/tty/serial/mrst_max3110.h
index d1ef43af397..c37ea48c825 100644
--- a/drivers/tty/serial/mrst_max3110.h
+++ b/drivers/tty/serial/mrst_max3110.h
@@ -21,7 +21,7 @@
#define WC_IRQ_MASK (0xF << 8)
#define WC_TXE_IRQ_ENABLE (1 << 11) /* TX empty irq */
-#define WC_RXA_IRQ_ENABLE (1 << 10) /* RX availabe irq */
+#define WC_RXA_IRQ_ENABLE (1 << 10) /* RX available irq */
#define WC_PAR_HIGH_IRQ_ENABLE (1 << 9)
#define WC_REC_ACT_IRQ_ENABLE (1 << 8)
diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c
index b906f11f7c1..624701f8138 100644
--- a/drivers/tty/serial/msm_serial_hs.c
+++ b/drivers/tty/serial/msm_serial_hs.c
@@ -495,7 +495,7 @@ static void msm_hs_pm(struct uart_port *uport, unsigned int state,
*
* Interrupts should be disabled before we are called, as
* we modify Set Baud rate
- * Set receive stale interrupt level, dependant on Bit Rate
+ * Set receive stale interrupt level, dependent on Bit Rate
* Goal is to have around 8 ms before indicate stale.
* roundup (((Bit Rate * .008) / 10) + 1
*/
@@ -1350,7 +1350,7 @@ static irqreturn_t msm_hs_rx_wakeup_isr(int irq, void *dev)
spin_lock_irqsave(&uport->lock, flags);
if (msm_uport->clk_state == MSM_HS_CLK_OFF) {
- /* ignore the first irq - it is a pending irq that occured
+ /* ignore the first irq - it is a pending irq that occurred
* before enable_irq() */
if (msm_uport->rx_wakeup.ignore)
msm_uport->rx_wakeup.ignore = 0;
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 763537943a5..47cadf47414 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -13,7 +13,7 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
- * Note: This driver is made seperate from 8250 driver as we cannot
+ * Note: This driver is made separate from 8250 driver as we cannot
* over load 8250 driver with omap platform specific configuration for
* features like DMA, it makes easier to implement features like DMA and
* hardware flow control and software flow control configuration with
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index 5b9cde79e4e..e1c8d4f1ce5 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -330,7 +330,7 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap)
* When that happens, I disable the receive side of the driver.
* Note that what I've been experiencing is a real irq loop where
* I'm getting flooded regardless of the actual port speed.
- * Something stange is going on with the HW
+ * Something strange is going on with the HW
*/
if ((++loops) > 1000)
goto flood;
@@ -396,7 +396,7 @@ static void pmz_transmit_chars(struct uart_pmac_port *uap)
* be nice to transmit console writes just like we normally would for
* a TTY line. (ie. buffered and TX interrupt driven). That is not
* easy because console writes cannot sleep. One solution might be
- * to poll on enough port->xmit space becomming free. -DaveM
+ * to poll on enough port->xmit space becoming free. -DaveM
*/
if (!(status & Tx_BUF_EMP))
return;
@@ -809,7 +809,7 @@ static int pmz_set_scc_power(struct uart_pmac_port *uap, int state)
#endif /* !CONFIG_PPC_PMAC */
/*
- * FixZeroBug....Works around a bug in the SCC receving channel.
+ * FixZeroBug....Works around a bug in the SCC receiving channel.
* Inspired from Darwin code, 15 Sept. 2000 -DanM
*
* The following sequence prevents a problem that is seen with O'Hare ASICs
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 2335edafe90..9e2fa8d784e 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -64,7 +64,7 @@
#define tx_enabled(port) ((port)->unused[0])
#define rx_enabled(port) ((port)->unused[1])
-/* flag to ignore all characters comming in */
+/* flag to ignore all characters coming in */
#define RXSTAT_DUMMY_READ (0x10000000)
static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port)
@@ -291,7 +291,7 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
goto out;
}
- /* if there isnt anything more to transmit, or the uart is now
+ /* if there isn't anything more to transmit, or the uart is now
* stopped, disable the uart and exit
*/
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index eb7958c675a..a7b083f4ea7 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -812,7 +812,7 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
}
/*
- * Here we define a transistion notifier so that we can update all of our
+ * Here we define a transition notifier so that we can update all of our
* ports' baud rate when the peripheral clock changes.
*/
static int sci_notifier(struct notifier_block *self,
diff --git a/drivers/tty/serial/sn_console.c b/drivers/tty/serial/sn_console.c
index cff9a306660..377ae74e715 100644
--- a/drivers/tty/serial/sn_console.c
+++ b/drivers/tty/serial/sn_console.c
@@ -146,7 +146,7 @@ static struct sn_sal_ops intr_ops = {
};
/* the console does output in two distinctly different ways:
- * synchronous (raw) and asynchronous (buffered). initally, early_printk
+ * synchronous (raw) and asynchronous (buffered). initially, early_printk
* does synchronous output. any data written goes directly to the SAL
* to be output (incidentally, it is internally buffered by the SAL)
* after interrupts and timers are initialized and available for use,
@@ -481,7 +481,7 @@ sn_receive_chars(struct sn_cons_port *port, unsigned long flags)
while (port->sc_ops->sal_input_pending()) {
ch = port->sc_ops->sal_getc();
if (ch < 0) {
- printk(KERN_ERR "sn_console: An error occured while "
+ printk(KERN_ERR "sn_console: An error occurred while "
"obtaining data from the console (0x%0x)\n", ch);
break;
}
diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c
index 99ff9abf57c..8e916e76b7b 100644
--- a/drivers/tty/serial/sunzilog.c
+++ b/drivers/tty/serial/sunzilog.c
@@ -474,7 +474,7 @@ static void sunzilog_transmit_chars(struct uart_sunzilog_port *up,
* be nice to transmit console writes just like we normally would for
* a TTY line. (ie. buffered and TX interrupt driven). That is not
* easy because console writes cannot sleep. One solution might be
- * to poll on enough port->xmit space becomming free. -DaveM
+ * to poll on enough port->xmit space becoming free. -DaveM
*/
if (!(status & Tx_BUF_EMP))
return;
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index 18888d005a0..27da23d98e3 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -4072,7 +4072,7 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
if ( request_irq(info->irq_level,mgsl_interrupt,info->irq_flags,
info->device_name, info ) < 0 ) {
- printk( "%s(%d):Cant request interrupt on device %s IRQ=%d\n",
+ printk( "%s(%d):Can't request interrupt on device %s IRQ=%d\n",
__FILE__,__LINE__,info->device_name, info->irq_level );
goto errout;
}
@@ -4095,7 +4095,7 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
info->memory_base = ioremap_nocache(info->phys_memory_base,
0x40000);
if (!info->memory_base) {
- printk( "%s(%d):Cant map shared memory on device %s MemAddr=%08X\n",
+ printk( "%s(%d):Can't map shared memory on device %s MemAddr=%08X\n",
__FILE__,__LINE__,info->device_name, info->phys_memory_base );
goto errout;
}
@@ -4109,7 +4109,7 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
info->lcr_base = ioremap_nocache(info->phys_lcr_base,
PAGE_SIZE);
if (!info->lcr_base) {
- printk( "%s(%d):Cant map LCR memory on device %s MemAddr=%08X\n",
+ printk( "%s(%d):Can't map LCR memory on device %s MemAddr=%08X\n",
__FILE__,__LINE__,info->device_name, info->phys_lcr_base );
goto errout;
}
@@ -4119,7 +4119,7 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
/* claim DMA channel */
if (request_dma(info->dma_level,info->device_name) < 0){
- printk( "%s(%d):Cant request DMA channel on device %s DMA=%d\n",
+ printk( "%s(%d):Can't request DMA channel on device %s DMA=%d\n",
__FILE__,__LINE__,info->device_name, info->dma_level );
mgsl_release_resources( info );
return -ENODEV;
@@ -4132,7 +4132,7 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
}
if ( mgsl_allocate_dma_buffers(info) < 0 ) {
- printk( "%s(%d):Cant allocate DMA buffers on device %s DMA=%d\n",
+ printk( "%s(%d):Can't allocate DMA buffers on device %s DMA=%d\n",
__FILE__,__LINE__,info->device_name, info->dma_level );
goto errout;
}
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index a35dd549a00..18b48cd3b41 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -3491,7 +3491,7 @@ static int claim_resources(struct slgt_info *info)
info->reg_addr = ioremap_nocache(info->phys_reg_addr, SLGT_REG_SIZE);
if (!info->reg_addr) {
- DBGERR(("%s cant map device registers, addr=%08X\n",
+ DBGERR(("%s can't map device registers, addr=%08X\n",
info->device_name, info->phys_reg_addr));
info->init_error = DiagStatus_CantAssignPciResources;
goto errout;
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index 32734369447..c77831c7675 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -3595,7 +3595,7 @@ static int claim_resources(SLMP_INFO *info)
info->memory_base = ioremap_nocache(info->phys_memory_base,
SCA_MEM_SIZE);
if (!info->memory_base) {
- printk( "%s(%d):%s Cant map shared memory, MemAddr=%08X\n",
+ printk( "%s(%d):%s Can't map shared memory, MemAddr=%08X\n",
__FILE__,__LINE__,info->device_name, info->phys_memory_base );
info->init_error = DiagStatus_CantAssignPciResources;
goto errout;
@@ -3603,7 +3603,7 @@ static int claim_resources(SLMP_INFO *info)
info->lcr_base = ioremap_nocache(info->phys_lcr_base, PAGE_SIZE);
if (!info->lcr_base) {
- printk( "%s(%d):%s Cant map LCR memory, MemAddr=%08X\n",
+ printk( "%s(%d):%s Can't map LCR memory, MemAddr=%08X\n",
__FILE__,__LINE__,info->device_name, info->phys_lcr_base );
info->init_error = DiagStatus_CantAssignPciResources;
goto errout;
@@ -3612,7 +3612,7 @@ static int claim_resources(SLMP_INFO *info)
info->sca_base = ioremap_nocache(info->phys_sca_base, PAGE_SIZE);
if (!info->sca_base) {
- printk( "%s(%d):%s Cant map SCA memory, MemAddr=%08X\n",
+ printk( "%s(%d):%s Can't map SCA memory, MemAddr=%08X\n",
__FILE__,__LINE__,info->device_name, info->phys_sca_base );
info->init_error = DiagStatus_CantAssignPciResources;
goto errout;
@@ -3622,7 +3622,7 @@ static int claim_resources(SLMP_INFO *info)
info->statctrl_base = ioremap_nocache(info->phys_statctrl_base,
PAGE_SIZE);
if (!info->statctrl_base) {
- printk( "%s(%d):%s Cant map SCA Status/Control memory, MemAddr=%08X\n",
+ printk( "%s(%d):%s Can't map SCA Status/Control memory, MemAddr=%08X\n",
__FILE__,__LINE__,info->device_name, info->phys_statctrl_base );
info->init_error = DiagStatus_CantAssignPciResources;
goto errout;
@@ -3869,7 +3869,7 @@ static void device_init(int adapter_num, struct pci_dev *pdev)
port_array[0]->irq_flags,
port_array[0]->device_name,
port_array[0]) < 0 ) {
- printk( "%s(%d):%s Cant request interrupt, IRQ=%d\n",
+ printk( "%s(%d):%s Can't request interrupt, IRQ=%d\n",
__FILE__,__LINE__,
port_array[0]->device_name,
port_array[0]->irq_level );
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 936a4ead6c2..d7d50b48287 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -2134,7 +2134,7 @@ done:
* actually has driver level meaning and triggers a VC resize.
*
* Locking:
- * Driver dependant. The default do_resize method takes the
+ * Driver dependent. The default do_resize method takes the
* tty termios mutex and ctrl_lock. The console takes its own lock
* then calls into the default method.
*/
@@ -2155,7 +2155,7 @@ static int tiocswinsz(struct tty_struct *tty, struct winsize __user *arg)
* tioccons - allow admin to move logical console
* @file: the file to become console
*
- * Allow the adminstrator to move the redirected console device
+ * Allow the administrator to move the redirected console device
*
* Locking: uses redirect_lock to guard the redirect information
*/
@@ -2290,7 +2290,7 @@ EXPORT_SYMBOL_GPL(tty_get_pgrp);
/**
* tiocgpgrp - get process group
* @tty: tty passed by user
- * @real_tty: tty side of the tty pased by the user if a pty else the tty
+ * @real_tty: tty side of the tty passed by the user if a pty else the tty
* @p: returned pid
*
* Obtain the process group of the tty. If there is no process group
@@ -2367,7 +2367,7 @@ out_unlock:
/**
* tiocgsid - get session id
* @tty: tty passed by user
- * @real_tty: tty side of the tty pased by the user if a pty else the tty
+ * @real_tty: tty side of the tty passed by the user if a pty else the tty
* @p: pointer to returned session id
*
* Obtain the session id of the tty. If there is no session
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index 1a1135d580a..21574cb3234 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -247,7 +247,7 @@ speed_t tty_termios_baud_rate(struct ktermios *termios)
cbaud = termios->c_cflag & CBAUD;
#ifdef BOTHER
- /* Magic token for arbitary speed via c_ispeed/c_ospeed */
+ /* Magic token for arbitrary speed via c_ispeed/c_ospeed */
if (cbaud == BOTHER)
return termios->c_ospeed;
#endif
@@ -283,7 +283,7 @@ speed_t tty_termios_input_baud_rate(struct ktermios *termios)
if (cbaud == B0)
return tty_termios_baud_rate(termios);
- /* Magic token for arbitary speed via c_ispeed*/
+ /* Magic token for arbitrary speed via c_ispeed*/
if (cbaud == BOTHER)
return termios->c_ispeed;
@@ -449,7 +449,7 @@ EXPORT_SYMBOL(tty_get_baud_rate);
* @new: New termios
* @old: Old termios
*
- * Propogate the hardware specific terminal setting bits from
+ * Propagate the hardware specific terminal setting bits from
* the old termios structure to the new one. This is used in cases
* where the hardware does not support reconfiguration or as a helper
* in some cases where only minimal reconfiguration is supported
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index c83cdfb56fc..4bea1efaec9 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -3963,7 +3963,7 @@ void reset_palette(struct vc_data *vc)
* of 32 pixels. Userspace fontdata is stored with 32 bytes (shorts/ints,
* depending on width) reserved for each character which is kinda wasty, but
* this is done in order to maintain compatibility with the EGA/VGA fonts. It
- * is upto the actual low-level console-driver convert data into its favorite
+ * is up to the actual low-level console-driver convert data into its favorite
* format (maybe we should add a `fontoffset' field to the `display'
* structure so we won't have to convert the fontdata all the time.
* /Jes