aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasusb.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/staging/westbridge/astoria/include/linux/westbridge/cyasusb.h')
-rw-r--r--drivers/staging/westbridge/astoria/include/linux/westbridge/cyasusb.h40
1 files changed, 20 insertions, 20 deletions
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasusb.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasusb.h
index 4a549e14681..e3ba9ca4c75 100644
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasusb.h
+++ b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasusb.h
@@ -464,7 +464,7 @@ typedef struct cy_as_usb_end_point_config {
be selected on a partitioned storage device.
Description
- West Bridge firmware supports creating upto two
+ West Bridge firmware supports creating up to two
partitions on mass storage devices connected to
West Bridge. When there are two partitions on a device,
the user can choose which of these partitions should be
@@ -698,7 +698,7 @@ cy_as_usb_start(
* been configured
* CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
* into West Bridge
- * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+ * CY_AS_ERROR_SUCCESS - this module was shut down successfully
* CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
* the West Bridge device
@@ -752,7 +752,7 @@ cy_as_usb_register_callback(
* Nestable: YES
Returns
- * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+ * CY_AS_ERROR_SUCCESS - this module was shut down successfully
* CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
* been configured
* CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
@@ -791,7 +791,7 @@ cy_as_usb_connect(
* Nestable: YES
Returns
- * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+ * CY_AS_ERROR_SUCCESS - this module was shut down successfully
* CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
* been configured
* CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
@@ -825,7 +825,7 @@ cy_as_usb_disconnect(
* Valid In Asynchronous Callback: Yes (if cb supplied)
Returns
- * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+ * CY_AS_ERROR_SUCCESS - this module was shut down successfully
* CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
* been configured
* CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
@@ -855,13 +855,13 @@ cy_as_usb_set_enum_config(
the USB stack
Description
- This function sends a request to West Bridge to retreive
+ This function sends a request to West Bridge to retrieve
the current configuration
* Valid In Asynchronous Callback: Yes (if cb supplied)
Returns
- * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+ * CY_AS_ERROR_SUCCESS - this module was shut down successfully
* CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
* been configured
* CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
@@ -906,7 +906,7 @@ cy_as_usb_get_enum_config(
Chapter 9.
Returns
- * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+ * CY_AS_ERROR_SUCCESS - this module was shut down successfully
* CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
* been configured
* CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
@@ -993,7 +993,7 @@ cy_as_usb_clear_descriptors(
Description
This data structure the buffer to hold the descriptor
data, and an in/out parameter ti indicate the
- lenght of the buffer and descriptor data in bytes.
+ length of the buffer and descriptor data in bytes.
See Also
* CyAsUsbGetDescriptor
@@ -1027,7 +1027,7 @@ typedef struct cy_as_get_descriptor_data {
Chapter 9.
Returns
- * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+ * CY_AS_ERROR_SUCCESS - this module was shut down successfully
* CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
* been configured
* CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
@@ -1106,7 +1106,7 @@ cy_as_usb_get_descriptor(
* Valid In Asynchronous Callback: NO
Returns
- * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+ * CY_AS_ERROR_SUCCESS - this module was shut down successfully
* CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
* been configured
* CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
@@ -1140,7 +1140,7 @@ cy_as_usb_set_physical_configuration(
Add documentation about endpoint configuration limitations
Returns
- * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+ * CY_AS_ERROR_SUCCESS - this module was shut down successfully
* CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
* been configured
* CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
@@ -1181,7 +1181,7 @@ cy_as_usb_set_end_point_config(
* Valid In Asynchronous Callback: NO
Returns
- * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+ * CY_AS_ERROR_SUCCESS - this module was shut down successfully
* CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
* been configured
* CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
@@ -1219,7 +1219,7 @@ cy_as_usb_get_end_point_config(
functions store away the configuration information and this
CyAsUsbCommitConfig() actually finds the
best hardware configuration based on the requested endpoint
- configuration and sends thsi optimal
+ configuration and sends this optimal
confiuration down to the West Bridge device.
* Valid In Asynchronous Callback: YES (if cb supplied)
@@ -1268,7 +1268,7 @@ cy_as_usb_commit_config(
* Valid In Asynchronous Callback: NO
Returns
- * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+ * CY_AS_ERROR_SUCCESS - this module was shut down successfully
* CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
* the West Bridge device
* CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
@@ -1311,7 +1311,7 @@ cy_as_usb_read_data(
* Valid In Asynchronous Callback: YES
Returns
- * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+ * CY_AS_ERROR_SUCCESS - this module was shut down successfully
* CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
* the West Bridge device
* CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
@@ -1355,7 +1355,7 @@ cy_as_usb_read_data_async(
a zero length packet transmitted to the USB host.
Returns
- * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+ * CY_AS_ERROR_SUCCESS - this module was shut down successfully
* CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
* the West Bridge device
* CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
@@ -1395,7 +1395,7 @@ cy_as_usb_write_data(
in a zero length packet transmitted to the USB host.
Returns
- * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+ * CY_AS_ERROR_SUCCESS - this module was shut down successfully
* CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
* the West Bridge device
* CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
@@ -1435,7 +1435,7 @@ cy_as_usb_write_data_async(
Returns
* CY_AS_ERROR_SUCCESS - this module was shut down
- * sucessfully
+ * successfully
* CY_AS_ERROR_NOT_RUNNING - the USB stack is not
* running
* CY_AS_ERROR_ASYNC_NOT_PENDING - no asynchronous USB
@@ -1791,7 +1791,7 @@ cy_as_usb_set_m_s_report_threshold(
device should be made visible to USB.
Description
- West Bridge firmware supports the creation of upto two
+ West Bridge firmware supports the creation of up to two
partitions on mass storage devices connected to the West Bridge
device. When there are two partitions on a device, the user can
choose which of these partitions should be made visible to the