aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/staging/tty
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/staging/tty')
-rw-r--r--drivers/staging/tty/cd1865.h2
-rw-r--r--drivers/staging/tty/epca.c16
-rw-r--r--drivers/staging/tty/ip2/i2hw.h4
-rw-r--r--drivers/staging/tty/ip2/i2lib.c8
-rw-r--r--drivers/staging/tty/ip2/ip2main.c2
-rw-r--r--drivers/staging/tty/specialix.c4
-rw-r--r--drivers/staging/tty/specialix_io8.h4
7 files changed, 20 insertions, 20 deletions
diff --git a/drivers/staging/tty/cd1865.h b/drivers/staging/tty/cd1865.h
index 9940966e7a1..8c2ad654b79 100644
--- a/drivers/staging/tty/cd1865.h
+++ b/drivers/staging/tty/cd1865.h
@@ -9,7 +9,7 @@
* Please DO contact io8-linux@specialix.co.uk if you require
* support.
*
- * This driver was developped in the BitWizard linux device
+ * This driver was developed in the BitWizard linux device
* driver service. If you require a linux device driver for your
* product, please contact devices@BitWizard.nl for a quote.
*
diff --git a/drivers/staging/tty/epca.c b/drivers/staging/tty/epca.c
index 7ad3638967a..7f1369e5b41 100644
--- a/drivers/staging/tty/epca.c
+++ b/drivers/staging/tty/epca.c
@@ -7,7 +7,7 @@
** This driver is no longer supported by Digi **
Much of this design and code came from epca.c which was
- copyright (C) 1994, 1995 Troy De Jongh, and subsquently
+ copyright (C) 1994, 1995 Troy De Jongh, and subsequently
modified by David Nugent, Christoph Lameter, Mike McLagan.
This program is free software; you can redistribute it and/or modify
@@ -471,7 +471,7 @@ static void shutdown(struct channel *ch, struct tty_struct *tty)
memoff(ch);
/*
- * The channel has officialy been closed. The next time it is opened it
+ * The channel has officially been closed. The next time it is opened it
* will have to reinitialized. Set a flag to indicate this.
*/
/* Prevent future Digi programmed interrupts from coming active */
@@ -975,7 +975,7 @@ static int __init pc_init(void)
/*
* Note : If lilo was used to configure the driver and the ignore
- * epcaconfig option was choosen (digiepca=2) then nbdevs and num_cards
+ * epcaconfig option was chosen (digiepca=2) then nbdevs and num_cards
* will equal 0 at this point. This is okay; PCI cards will still be
* picked up if detected.
*/
@@ -1230,14 +1230,14 @@ static void post_fep_init(unsigned int crd)
memaddr = bd->re_map_membase;
/*
- * The below assignment will set bc to point at the BEGINING of the
+ * The below assignment will set bc to point at the BEGINNING of the
* cards channel structures. For 1 card there will be between 8 and 64
* of these structures.
*/
bc = memaddr + CHANSTRUCT;
/*
- * The below assignment will set gd to point at the BEGINING of global
+ * The below assignment will set gd to point at the BEGINNING of global
* memory address 0xc00. The first data in that global memory actually
* starts at address 0xc1a. The command in pointer begins at 0xd10.
*/
@@ -1492,7 +1492,7 @@ static void doevent(int crd)
/*
* The two assignments below get the current modem status
* (mstat) and the previous modem status (lstat). These are
- * useful becuase an event could signal a change in modem
+ * useful because an event could signal a change in modem
* signals itself.
*/
mstat = readb(eventbuf + 2);
@@ -1897,7 +1897,7 @@ static void receive_data(struct channel *ch, struct tty_struct *tty)
/*
* Even if head has wrapped around only report the amount of
* data to be equal to the size - tail. Remember memcpy can't
- * automaticly wrap around the receive buffer.
+ * automatically wrap around the receive buffer.
*/
dataToRead = (wrapgap < bytesAvailable) ? wrapgap
: bytesAvailable;
@@ -2543,7 +2543,7 @@ static void __init epca_setup(char *str, int *ints)
break;
/*
* If the index incremented above refers to a
- * legitamate board type set it here.
+ * legitimate board type set it here.
*/
if (index < EPCA_NUM_TYPES)
board.type = loop;
diff --git a/drivers/staging/tty/ip2/i2hw.h b/drivers/staging/tty/ip2/i2hw.h
index c0ba6c05f0c..8df2f487217 100644
--- a/drivers/staging/tty/ip2/i2hw.h
+++ b/drivers/staging/tty/ip2/i2hw.h
@@ -335,7 +335,7 @@ be off by a factor of five. The important point is that the first command reset
in fact generates a reset pulse on the board. This pulse is guaranteed to last
less than 10 milliseconds. The additional delay ensures the 1400 has had the
chance to respond sufficiently to the first reset. Why not a longer delay? Much
-more than 50 milliseconds gets to be noticable, but the board would still work.
+more than 50 milliseconds gets to be noticeable, but the board would still work.
Once all 16 bytes of the Power-on Reset Message have been read, the bootstrap
firmware is ready to receive loadware.
@@ -399,7 +399,7 @@ typedef union _porStr // "por" stands for Power On Reset
// expandable products must report a MAP of available channels. Since
// each UART supports four ports, we represent each UART found by a
// single bit. Using two bytes to supply the mapping information we
- // report the presense or absense of up to 16 UARTS, or 64 ports in
+ // report the presence or absence of up to 16 UARTS, or 64 ports in
// steps of 4 ports. For -IIEX products, the ports are numbered
// starting at the box closest to the controller in the "chain".
diff --git a/drivers/staging/tty/ip2/i2lib.c b/drivers/staging/tty/ip2/i2lib.c
index 0d10b89218e..13a3caba85f 100644
--- a/drivers/staging/tty/ip2/i2lib.c
+++ b/drivers/staging/tty/ip2/i2lib.c
@@ -821,7 +821,7 @@ i2GetStatus(i2ChanStrPtr pCh, int resetBits)
//
// Description:
// Strips data from the input buffer and writes it to pDest. If there is a
-// collosal blunder, (invalid structure pointers or the like), returns -1.
+// colossal blunder, (invalid structure pointers or the like), returns -1.
// Otherwise, returns the number of bytes read.
//******************************************************************************
static int
@@ -909,7 +909,7 @@ i2Input_exit:
// Returns: Number of bytes stripped, or -1 for error
//
// Description:
-// Strips any data from the input buffer. If there is a collosal blunder,
+// Strips any data from the input buffer. If there is a colossal blunder,
// (invalid structure pointers or the like), returns -1. Otherwise, returns the
// number of bytes stripped.
//******************************************************************************
@@ -963,7 +963,7 @@ i2InputFlush(i2ChanStrPtr pCh)
// Returns: Number of bytes available, or -1 for error
//
// Description:
-// If there is a collosal blunder, (invalid structure pointers or the like),
+// If there is a colossal blunder, (invalid structure pointers or the like),
// returns -1. Otherwise, returns the number of bytes stripped. Otherwise,
// returns the number of bytes available in the buffer.
//******************************************************************************
@@ -1001,7 +1001,7 @@ i2InputAvailable(i2ChanStrPtr pCh)
//
// Description:
// Queues the data at pSource to be sent as data packets to the board. If there
-// is a collosal blunder, (invalid structure pointers or the like), returns -1.
+// is a colossal blunder, (invalid structure pointers or the like), returns -1.
// Otherwise, returns the number of bytes written. What if there is not enough
// room for all the data? If pCh->channelOptions & CO_NBLOCK_WRITE is set, then
// we transfer as many characters as we can now, then return. If this bit is
diff --git a/drivers/staging/tty/ip2/ip2main.c b/drivers/staging/tty/ip2/ip2main.c
index ea7a8fb0828..ba074fbb4ce 100644
--- a/drivers/staging/tty/ip2/ip2main.c
+++ b/drivers/staging/tty/ip2/ip2main.c
@@ -1824,7 +1824,7 @@ ip2_flush_chars( PTTY tty )
// ip2trace (CHANN, ITRC_PUTC, 10, 1, strip );
//
- // We may need to restart i2Output if it does not fullfill this request
+ // We may need to restart i2Output if it does not fulfill this request
//
strip = i2Output( pCh, pCh->Pbuf, pCh->Pbuf_stuff);
if ( strip != pCh->Pbuf_stuff ) {
diff --git a/drivers/staging/tty/specialix.c b/drivers/staging/tty/specialix.c
index 17a1be536a4..cb24c6d999d 100644
--- a/drivers/staging/tty/specialix.c
+++ b/drivers/staging/tty/specialix.c
@@ -9,7 +9,7 @@
* support. But please read the documentation (specialix.txt)
* first.
*
- * This driver was developped in the BitWizard linux device
+ * This driver was developed in the BitWizard linux device
* driver service. If you require a linux device driver for your
* product, please contact devices@BitWizard.nl for a quote.
*
@@ -978,7 +978,7 @@ static void sx_change_speed(struct specialix_board *bp,
spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CAR, port_No(port));
- /* The Specialix board doens't implement the RTS lines.
+ /* The Specialix board does't implement the RTS lines.
They are used to set the IRQ level. Don't touch them. */
if (sx_crtscts(tty))
port->MSVR = MSVR_DTR | (sx_in(bp, CD186x_MSVR) & MSVR_RTS);
diff --git a/drivers/staging/tty/specialix_io8.h b/drivers/staging/tty/specialix_io8.h
index c63005274d9..1215d7e2cb3 100644
--- a/drivers/staging/tty/specialix_io8.h
+++ b/drivers/staging/tty/specialix_io8.h
@@ -10,7 +10,7 @@
* Please DO contact io8-linux@specialix.co.uk if you require
* support.
*
- * This driver was developped in the BitWizard linux device
+ * This driver was developed in the BitWizard linux device
* driver service. If you require a linux device driver for your
* product, please contact devices@BitWizard.nl for a quote.
*
@@ -79,7 +79,7 @@ more than a few PCI versions of the card. */
#define SPECIALIX_MAGIC 0x0907
-#define SX_CCR_TIMEOUT 10000 /* CCR timeout. You may need to wait upto
+#define SX_CCR_TIMEOUT 10000 /* CCR timeout. You may need to wait up to
10 milliseconds before the internal
processor is available again after
you give it a command */