aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/spi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/amba-pl022.c16
-rw-r--r--drivers/spi/au1550_spi.c2
-rw-r--r--drivers/spi/dw_spi.c2
-rw-r--r--drivers/spi/dw_spi.h2
-rw-r--r--drivers/spi/ep93xx_spi.c2
-rw-r--r--drivers/spi/pxa2xx_spi.c4
-rw-r--r--drivers/spi/spi.c2
-rw-r--r--drivers/spi/spi_bfin5xx.c2
-rw-r--r--drivers/spi/spi_fsl_espi.c2
9 files changed, 17 insertions, 17 deletions
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index 5a4e0afb9ad..5825370bad2 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -661,7 +661,7 @@ static void readwriter(struct pl022 *pl022)
{
/*
- * The FIFO depth is different inbetween primecell variants.
+ * The FIFO depth is different between primecell variants.
* I believe filling in too much in the FIFO might cause
* errons in 8bit wide transfers on ARM variants (just 8 words
* FIFO, means only 8x8 = 64 bits in FIFO) at least.
@@ -722,7 +722,7 @@ static void readwriter(struct pl022 *pl022)
* This inner reader takes care of things appearing in the RX
* FIFO as we're transmitting. This will happen a lot since the
* clock starts running when you put things into the TX FIFO,
- * and then things are continously clocked into the RX FIFO.
+ * and then things are continuously clocked into the RX FIFO.
*/
while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
&& (pl022->rx < pl022->rx_end)) {
@@ -842,7 +842,7 @@ static void dma_callback(void *data)
unmap_free_dma_scatter(pl022);
- /* Update total bytes transfered */
+ /* Update total bytes transferred */
msg->actual_length += pl022->cur_transfer->len;
if (pl022->cur_transfer->cs_change)
pl022->cur_chip->
@@ -1224,7 +1224,7 @@ static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id)
"number of bytes on a 16bit bus?)\n",
(u32) (pl022->rx - pl022->rx_end));
}
- /* Update total bytes transfered */
+ /* Update total bytes transferred */
msg->actual_length += pl022->cur_transfer->len;
if (pl022->cur_transfer->cs_change)
pl022->cur_chip->
@@ -1415,11 +1415,11 @@ static void do_polling_transfer(struct pl022 *pl022)
SSP_CR1(pl022->virtbase));
dev_dbg(&pl022->adev->dev, "polling transfer ongoing ...\n");
- /* FIXME: insert a timeout so we don't hang here indefinately */
+ /* FIXME: insert a timeout so we don't hang here indefinitely */
while (pl022->tx < pl022->tx_end || pl022->rx < pl022->rx_end)
readwriter(pl022);
- /* Update total byte transfered */
+ /* Update total byte transferred */
message->actual_length += pl022->cur_transfer->len;
if (pl022->cur_transfer->cs_change)
pl022->cur_chip->cs_control(SSP_CHIP_DESELECT);
@@ -2129,7 +2129,7 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
"probe - problem registering spi master\n");
goto err_spi_register;
}
- dev_dbg(dev, "probe succeded\n");
+ dev_dbg(dev, "probe succeeded\n");
/*
* Disable the silicon block pclk and any voltage domain and just
* power it up and clock it when it's needed
@@ -2184,7 +2184,7 @@ pl022_remove(struct amba_device *adev)
spi_unregister_master(pl022->master);
spi_master_put(pl022->master);
amba_set_drvdata(adev, NULL);
- dev_dbg(&adev->dev, "remove succeded\n");
+ dev_dbg(&adev->dev, "remove succeeded\n");
return 0;
}
diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c
index 3c9ade69643..b50563d320e 100644
--- a/drivers/spi/au1550_spi.c
+++ b/drivers/spi/au1550_spi.c
@@ -480,7 +480,7 @@ static irqreturn_t au1550_spi_dma_irq_callback(struct au1550_spi *hw)
au1xxx_dbdma_stop(hw->dma_rx_ch);
au1xxx_dbdma_stop(hw->dma_tx_ch);
- /* get number of transfered bytes */
+ /* get number of transferred bytes */
hw->rx_count = hw->len - au1xxx_get_dma_residue(hw->dma_rx_ch);
hw->tx_count = hw->len - au1xxx_get_dma_residue(hw->dma_tx_ch);
diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c
index 9a6196461b2..b1a4b9f503a 100644
--- a/drivers/spi/dw_spi.c
+++ b/drivers/spi/dw_spi.c
@@ -345,7 +345,7 @@ static void int_error_stop(struct dw_spi *dws, const char *msg)
void dw_spi_xfer_done(struct dw_spi *dws)
{
- /* Update total byte transfered return count actual bytes read */
+ /* Update total byte transferred return count actual bytes read */
dws->cur_msg->actual_length += dws->len;
/* Move to next transfer */
diff --git a/drivers/spi/dw_spi.h b/drivers/spi/dw_spi.h
index fb0bce56484..b23e452adaf 100644
--- a/drivers/spi/dw_spi.h
+++ b/drivers/spi/dw_spi.h
@@ -46,7 +46,7 @@
#define SPI_INT_RXFI (1 << 4)
#define SPI_INT_MSTI (1 << 5)
-/* TX RX interrupt level threshhold, max can be 256 */
+/* TX RX interrupt level threshold, max can be 256 */
#define SPI_INT_THRESHOLD 32
enum dw_ssi_type {
diff --git a/drivers/spi/ep93xx_spi.c b/drivers/spi/ep93xx_spi.c
index 0ba35df9a6d..d3570071e98 100644
--- a/drivers/spi/ep93xx_spi.c
+++ b/drivers/spi/ep93xx_spi.c
@@ -512,7 +512,7 @@ static int ep93xx_spi_read_write(struct ep93xx_spi *espi)
*
* This function processes one SPI transfer given in @t. Function waits until
* transfer is complete (may sleep) and updates @msg->status based on whether
- * transfer was succesfully processed or not.
+ * transfer was successfully processed or not.
*/
static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi,
struct spi_message *msg,
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index a429b01d028..9c74aad6be9 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -700,7 +700,7 @@ static void int_transfer_complete(struct driver_data *drv_data)
if (!pxa25x_ssp_comp(drv_data))
write_SSTO(0, reg);
- /* Update total byte transfered return count actual bytes read */
+ /* Update total byte transferred return count actual bytes read */
drv_data->cur_msg->actual_length += drv_data->len -
(drv_data->rx_end - drv_data->rx);
@@ -759,7 +759,7 @@ static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
/*
* PXA25x_SSP has no timeout, set up rx threshould for the
- * remaing RX bytes.
+ * remaining RX bytes.
*/
if (pxa25x_ssp_comp(drv_data)) {
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 34bb17f0301..82b9a428c32 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -957,7 +957,7 @@ EXPORT_SYMBOL_GPL(spi_sync);
* drivers may DMA directly into and out of the message buffers.
*
* This call should be used by drivers that require exclusive access to the
- * SPI bus. It has to be preceeded by a spi_bus_lock call. The SPI bus must
+ * SPI bus. It has to be preceded by a spi_bus_lock call. The SPI bus must
* be released by a spi_bus_unlock call when the exclusive access is over.
*
* It returns zero on success, else a negative error code.
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
index a28462486df..bdb7289a1d2 100644
--- a/drivers/spi/spi_bfin5xx.c
+++ b/drivers/spi/spi_bfin5xx.c
@@ -905,7 +905,7 @@ static void bfin_spi_pump_transfers(unsigned long data)
"IO write error!\n");
message->state = ERROR_STATE;
} else {
- /* Update total byte transfered */
+ /* Update total byte transferred */
message->actual_length += drv_data->len_in_bytes;
/* Move to next transfer of this msg */
message->state = bfin_spi_next_transfer(drv_data);
diff --git a/drivers/spi/spi_fsl_espi.c b/drivers/spi/spi_fsl_espi.c
index 900e921ab80..496f895a002 100644
--- a/drivers/spi/spi_fsl_espi.c
+++ b/drivers/spi/spi_fsl_espi.c
@@ -474,7 +474,7 @@ static int fsl_espi_setup(struct spi_device *spi)
mpc8xxx_spi = spi_master_get_devdata(spi->master);
reg_base = mpc8xxx_spi->reg_base;
- hw_mode = cs->hw_mode; /* Save orginal settings */
+ hw_mode = cs->hw_mode; /* Save original settings */
cs->hw_mode = mpc8xxx_spi_read_reg(
&reg_base->csmode[spi->chip_select]);
/* mask out bits we are going to set */