aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/aic7xxx_old.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/aic7xxx_old.c')
-rw-r--r--drivers/scsi/aic7xxx_old.c12
1 files changed, 6 insertions, 6 deletions
diff --git a/drivers/scsi/aic7xxx_old.c b/drivers/scsi/aic7xxx_old.c
index 4ff60a08df0..5b212f0df89 100644
--- a/drivers/scsi/aic7xxx_old.c
+++ b/drivers/scsi/aic7xxx_old.c
@@ -905,7 +905,7 @@ struct aic_dev_data {
* problems with architectures I can't test on (because I don't have one,
* such as the Alpha based systems) which happen to give faults for
* non-aligned memory accesses, care was taken to align this structure
- * in a way that gauranteed all accesses larger than 8 bits were aligned
+ * in a way that guaranteed all accesses larger than 8 bits were aligned
* on the appropriate boundary. It's also organized to try and be more
* cache line efficient. Be careful when changing this lest you might hurt
* overall performance and bring down the wrath of the masses.
@@ -1180,7 +1180,7 @@ static int aic7xxx_pci_parity = 0;
* the card's registers in a hex dump format tailored to each model of
* controller.
*
- * NOTE: THE CONTROLLER IS LEFT IN AN UNUSEABLE STATE BY THIS OPTION.
+ * NOTE: THE CONTROLLER IS LEFT IN AN UNUSABLE STATE BY THIS OPTION.
* YOU CANNOT BOOT UP WITH THIS OPTION, IT IS FOR DEBUGGING PURPOSES
* ONLY
*/
@@ -3467,7 +3467,7 @@ aic7xxx_reset_current_bus(struct aic7xxx_host *p)
/* Turn off the bus' current operations, after all, we shouldn't have any
* valid commands left to cause a RSELI and SELO once we've tossed the
* bus away with this reset, so we might as well shut down the sequencer
- * until the bus is restarted as oppossed to saving the current settings
+ * until the bus is restarted as opposed to saving the current settings
* and restoring them (which makes no sense to me). */
/* Turn on the bus reset. */
@@ -4070,7 +4070,7 @@ aic7xxx_handle_seqint(struct aic7xxx_host *p, unsigned char intstat)
aic_dev->max_q_depth = aic_dev->temp_q_depth = 1;
/*
* We set this command up as a bus device reset. However, we have
- * to clear the tag type as it's causing us problems. We shouldnt
+ * to clear the tag type as it's causing us problems. We shouldn't
* have to worry about any other commands being active, since if
* the device is refusing tagged commands, this should be the
* first tagged command sent to the device, however, we do have
@@ -9748,7 +9748,7 @@ skip_pci_controller:
}
/*
- * We are commited now, everything has been checked and this card
+ * We are committed now, everything has been checked and this card
* has been found, now we just set it up
*/
@@ -9906,7 +9906,7 @@ skip_pci_controller:
* 2: All PCI controllers with BIOS_ENABLED next, according to BIOS
* address, going from lowest to highest.
* 3: Remaining VLB/EISA controllers going in slot order.
- * 4: Remaining PCI controllers, going in PCI device order (reversable)
+ * 4: Remaining PCI controllers, going in PCI device order (reversible)
*/
{