aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/ath5k
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath/ath5k')
-rw-r--r--drivers/net/wireless/ath/ath5k/ani.h2
-rw-r--r--drivers/net/wireless/ath/ath5k/base.c6
-rw-r--r--drivers/net/wireless/ath/ath5k/desc.c14
-rw-r--r--drivers/net/wireless/ath/ath5k/eeprom.c4
-rw-r--r--drivers/net/wireless/ath/ath5k/pci.c2
-rw-r--r--drivers/net/wireless/ath/ath5k/pcu.c6
-rw-r--r--drivers/net/wireless/ath/ath5k/phy.c22
-rw-r--r--drivers/net/wireless/ath/ath5k/reg.h12
8 files changed, 34 insertions, 34 deletions
diff --git a/drivers/net/wireless/ath/ath5k/ani.h b/drivers/net/wireless/ath/ath5k/ani.h
index d0a664039c8..03401539709 100644
--- a/drivers/net/wireless/ath/ath5k/ani.h
+++ b/drivers/net/wireless/ath/ath5k/ani.h
@@ -27,7 +27,7 @@
#define ATH5K_ANI_RSSI_THR_HIGH 40
#define ATH5K_ANI_RSSI_THR_LOW 7
-/* maximum availabe levels */
+/* maximum available levels */
#define ATH5K_ANI_MAX_FIRSTEP_LVL 2
#define ATH5K_ANI_MAX_NOISE_IMM_LVL 1
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 4d7f21ee111..349a5963931 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -1953,7 +1953,7 @@ ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf)
#define FUDGE AR5K_TUNE_SW_BEACON_RESP + 3
/* We use FUDGE to make sure the next TBTT is ahead of the current TU.
- * Since we later substract AR5K_TUNE_SW_BEACON_RESP (10) in the timer
+ * Since we later subtract AR5K_TUNE_SW_BEACON_RESP (10) in the timer
* configuration we need to make sure it is bigger than that. */
if (bc_tsf == -1) {
@@ -1971,7 +1971,7 @@ ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf)
intval |= AR5K_BEACON_RESET_TSF;
} else if (bc_tsf > hw_tsf) {
/*
- * beacon received, SW merge happend but HW TSF not yet updated.
+ * beacon received, SW merge happened but HW TSF not yet updated.
* not possible to reconfigure timers yet, but next time we
* receive a beacon with the same BSSID, the hardware will
* automatically update the TSF and then we need to reconfigure
@@ -2651,7 +2651,7 @@ ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan,
synchronize_irq(sc->irq);
stop_tasklets(sc);
- /* Save ani mode and disable ANI durring
+ /* Save ani mode and disable ANI during
* reset. If we don't we might get false
* PHY error interrupts. */
ani_mode = ah->ah_sc->ani_state.ani_mode;
diff --git a/drivers/net/wireless/ath/ath5k/desc.c b/drivers/net/wireless/ath/ath5k/desc.c
index 16b44ff7dd3..a8fcc94269f 100644
--- a/drivers/net/wireless/ath/ath5k/desc.c
+++ b/drivers/net/wireless/ath/ath5k/desc.c
@@ -51,7 +51,7 @@ ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
/*
* Validate input
* - Zero retries don't make sense.
- * - A zero rate will put the HW into a mode where it continously sends
+ * - A zero rate will put the HW into a mode where it continuously sends
* noise on the channel, so it is important to avoid this.
*/
if (unlikely(tx_tries0 == 0)) {
@@ -190,7 +190,7 @@ static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah,
/*
* Validate input
* - Zero retries don't make sense.
- * - A zero rate will put the HW into a mode where it continously sends
+ * - A zero rate will put the HW into a mode where it continuously sends
* noise on the channel, so it is important to avoid this.
*/
if (unlikely(tx_tries0 == 0)) {
@@ -300,7 +300,7 @@ ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
/*
* Rates can be 0 as long as the retry count is 0 too.
* A zero rate and nonzero retry count will put the HW into a mode where
- * it continously sends noise on the channel, so it is important to
+ * it continuously sends noise on the channel, so it is important to
* avoid this.
*/
if (unlikely((tx_rate1 == 0 && tx_tries1 != 0) ||
@@ -342,7 +342,7 @@ ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
\***********************/
/*
- * Proccess the tx status descriptor on 5210/5211
+ * Process the tx status descriptor on 5210/5211
*/
static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah,
struct ath5k_desc *desc, struct ath5k_tx_status *ts)
@@ -394,7 +394,7 @@ static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah,
}
/*
- * Proccess a tx status descriptor on 5212
+ * Process a tx status descriptor on 5212
*/
static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah,
struct ath5k_desc *desc, struct ath5k_tx_status *ts)
@@ -519,7 +519,7 @@ int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
}
/*
- * Proccess the rx status descriptor on 5210/5211
+ * Process the rx status descriptor on 5210/5211
*/
static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah,
struct ath5k_desc *desc, struct ath5k_rx_status *rs)
@@ -602,7 +602,7 @@ static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah,
}
/*
- * Proccess the rx status descriptor on 5212
+ * Process the rx status descriptor on 5212
*/
static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah,
struct ath5k_desc *desc,
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index b6561f785c6..efb672cb31e 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -1080,7 +1080,7 @@ ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode)
*
* To recreate the curves we read here the points and interpolate
* later. Note that in most cases only 2 (higher and lower) curves are
- * used (like RF5112) but vendors have the oportunity to include all
+ * used (like RF5112) but vendors have the opportunity to include all
* 4 curves on eeprom. The final curve (higher power) has an extra
* point for better accuracy like RF5112.
*/
@@ -1302,7 +1302,7 @@ ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode)
/*
* Pd gain 0 is not the last pd gain
* so it only has 2 pd points.
- * Continue wih pd gain 1.
+ * Continue with pd gain 1.
*/
pcinfo->pwr_i[1] = (val >> 10) & 0x1f;
diff --git a/drivers/net/wireless/ath/ath5k/pci.c b/drivers/net/wireless/ath/ath5k/pci.c
index 66598a0d1df..3c44689a700 100644
--- a/drivers/net/wireless/ath/ath5k/pci.c
+++ b/drivers/net/wireless/ath/ath5k/pci.c
@@ -57,7 +57,7 @@ static void ath5k_pci_read_cachesize(struct ath_common *common, int *csz)
*csz = (int)u8tmp;
/*
- * This check was put in to avoid "unplesant" consequences if
+ * This check was put in to avoid "unpleasant" consequences if
* the bootrom has not fully initialized all PCI devices.
* Sometimes the cache line size register is not set
*/
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c
index a702817daf7..d9b3f828455 100644
--- a/drivers/net/wireless/ath/ath5k/pcu.c
+++ b/drivers/net/wireless/ath/ath5k/pcu.c
@@ -472,7 +472,7 @@ void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter)
}
/*
- * The AR5210 uses promiscous mode to detect radar activity
+ * The AR5210 uses promiscuous mode to detect radar activity
*/
if (ah->ah_version == AR5K_AR5210 &&
(filter & AR5K_RX_FILTER_RADARERR)) {
@@ -706,8 +706,8 @@ ath5k_check_timer_win(int a, int b, int window, int intval)
* The need for this function arises from the fact that we have 4 separate
* HW timer registers (TIMER0 - TIMER3), which are closely related to the
* next beacon target time (NBTT), and that the HW updates these timers
- * seperately based on the current TSF value. The hardware increments each
- * timer by the beacon interval, when the local TSF coverted to TU is equal
+ * separately based on the current TSF value. The hardware increments each
+ * timer by the beacon interval, when the local TSF converted to TU is equal
* to the value stored in the timer.
*
* The reception of a beacon with the same BSSID can update the local HW TSF
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 62ce2f4e860..55441913344 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -335,11 +335,11 @@ static void ath5k_hw_wait_for_synth(struct ath5k_hw *ah,
* http://madwifi-project.org/ticket/1659
* with various measurements and diagrams
*
- * TODO: Deal with power drops due to probes by setting an apropriate
+ * TODO: Deal with power drops due to probes by setting an appropriate
* tx power on the probe packets ! Make this part of the calibration process.
*/
-/* Initialize ah_gain durring attach */
+/* Initialize ah_gain during attach */
int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah)
{
/* Initialize the gain optimization values */
@@ -1049,7 +1049,7 @@ static int ath5k_hw_rfregs_init(struct ath5k_hw *ah,
\**************************/
/*
- * Convertion needed for RF5110
+ * Conversion needed for RF5110
*/
static u32 ath5k_hw_rf5110_chan2athchan(struct ieee80211_channel *channel)
{
@@ -1088,7 +1088,7 @@ static int ath5k_hw_rf5110_channel(struct ath5k_hw *ah,
}
/*
- * Convertion needed for 5111
+ * Conversion needed for 5111
*/
static int ath5k_hw_rf5111_chan2athchan(unsigned int ieee,
struct ath5k_athchan_2ghz *athchan)
@@ -2201,7 +2201,7 @@ ath5k_create_power_curve(s16 pmin, s16 pmax,
/*
* Get the surrounding per-channel power calibration piers
* for a given frequency so that we can interpolate between
- * them and come up with an apropriate dataset for our current
+ * them and come up with an appropriate dataset for our current
* channel.
*/
static void
@@ -2618,7 +2618,7 @@ ath5k_write_pcdac_table(struct ath5k_hw *ah)
/*
* Set the gain boundaries and create final Power to PDADC table
*
- * We can have up to 4 pd curves, we need to do a simmilar process
+ * We can have up to 4 pd curves, we need to do a similar process
* as we do for RF5112. This time we don't have an edge_flag but we
* set the gain boundaries on a separate register.
*/
@@ -2826,13 +2826,13 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah,
u32 target = channel->center_freq;
int pdg, i;
- /* Get surounding freq piers for this channel */
+ /* Get surrounding freq piers for this channel */
ath5k_get_chan_pcal_surrounding_piers(ah, channel,
&pcinfo_L,
&pcinfo_R);
/* Loop over pd gain curves on
- * surounding freq piers by index */
+ * surrounding freq piers by index */
for (pdg = 0; pdg < ee->ee_pd_gains[ee_mode]; pdg++) {
/* Fill curves in reverse order
@@ -2923,7 +2923,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah,
}
/* Interpolate between curves
- * of surounding freq piers to
+ * of surrounding freq piers to
* get the final curve for this
* pd gain. Re-use tmpL for interpolation
* output */
@@ -2947,7 +2947,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah,
/* Fill min and max power levels for this
* channel by interpolating the values on
- * surounding channels to complete the dataset */
+ * surrounding channels to complete the dataset */
ah->ah_txpower.txp_min_pwr = ath5k_get_interpolated_value(target,
(s16) pcinfo_L->freq,
(s16) pcinfo_R->freq,
@@ -3179,7 +3179,7 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
/* FIXME: TPC scale reduction */
- /* Get surounding channels for per-rate power table
+ /* Get surrounding channels for per-rate power table
* calibration */
ath5k_get_rate_pcal_data(ah, channel, &rate_info);
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index e1c9abd8c87..d12b827033c 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -132,8 +132,8 @@
* As i can see in ar5k_ar5210_tx_start Reyk uses some of the values of BCR
* for this register, so i guess TQ1V,TQ1FV and BDMAE have the same meaning
* here and SNP/SNAP means "snapshot" (so this register gets synced with BCR).
- * So SNAPPEDBCRVALID sould also stand for "snapped BCR -values- valid", so i
- * renamed it to SNAPSHOTSVALID to make more sense. I realy have no idea what
+ * So SNAPPEDBCRVALID should also stand for "snapped BCR -values- valid", so i
+ * renamed it to SNAPSHOTSVALID to make more sense. I really have no idea what
* else can it be. I also renamed SNPBCMD to SNPADHOC to match BCR.
*/
#define AR5K_BSR 0x002c /* Register Address */
@@ -283,7 +283,7 @@
*/
#define AR5K_ISR 0x001c /* Register Address [5210] */
#define AR5K_PISR 0x0080 /* Register Address [5211+] */
-#define AR5K_ISR_RXOK 0x00000001 /* Frame successfuly recieved */
+#define AR5K_ISR_RXOK 0x00000001 /* Frame successfuly received */
#define AR5K_ISR_RXDESC 0x00000002 /* RX descriptor request */
#define AR5K_ISR_RXERR 0x00000004 /* Receive error */
#define AR5K_ISR_RXNOFRM 0x00000008 /* No frame received (receive timeout) */
@@ -372,12 +372,12 @@
/*
* Interrupt Mask Registers
*
- * As whith ISRs 5210 has one IMR (AR5K_IMR) and 5211/5212 has one primary
+ * As with ISRs 5210 has one IMR (AR5K_IMR) and 5211/5212 has one primary
* (AR5K_PIMR) and 4 secondary IMRs (AR5K_SIMRx). Note that ISR/IMR flags match.
*/
#define AR5K_IMR 0x0020 /* Register Address [5210] */
#define AR5K_PIMR 0x00a0 /* Register Address [5211+] */
-#define AR5K_IMR_RXOK 0x00000001 /* Frame successfuly recieved*/
+#define AR5K_IMR_RXOK 0x00000001 /* Frame successfuly received*/
#define AR5K_IMR_RXDESC 0x00000002 /* RX descriptor request*/
#define AR5K_IMR_RXERR 0x00000004 /* Receive error*/
#define AR5K_IMR_RXNOFRM 0x00000008 /* No frame received (receive timeout)*/
@@ -895,7 +895,7 @@
#define AR5K_PCICFG_SL_INTEN 0x00000800 /* Enable interrupts when asleep */
#define AR5K_PCICFG_LED_BCTL 0x00001000 /* Led blink (?) [5210] */
#define AR5K_PCICFG_RETRY_FIX 0x00001000 /* Enable pci core retry fix */
-#define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even whith pending interrupts*/
+#define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even with pending interrupts*/
#define AR5K_PCICFG_SPWR_DN 0x00010000 /* Mask for power status */
#define AR5K_PCICFG_LEDMODE 0x000e0000 /* Ledmode [5211+] */
#define AR5K_PCICFG_LEDMODE_PROP 0x00000000 /* Blink on standard traffic [5211+] */