aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand')
-rw-r--r--drivers/mtd/nand/Kconfig2
-rw-r--r--drivers/mtd/nand/ams-delta.c2
-rw-r--r--drivers/mtd/nand/autcpu12.c2
-rw-r--r--drivers/mtd/nand/cs553x_nand.c2
-rw-r--r--drivers/mtd/nand/denali.c6
-rw-r--r--drivers/mtd/nand/diskonchip.c8
-rw-r--r--drivers/mtd/nand/fsl_elbc_nand.c2
-rw-r--r--drivers/mtd/nand/fsmc_nand.c10
-rw-r--r--drivers/mtd/nand/nand_base.c2
-rw-r--r--drivers/mtd/nand/nand_bbt.c2
-rw-r--r--drivers/mtd/nand/nandsim.c2
-rw-r--r--drivers/mtd/nand/nomadik_nand.c2
-rw-r--r--drivers/mtd/nand/pasemi_nand.c2
-rw-r--r--drivers/mtd/nand/plat_nand.c2
-rw-r--r--drivers/mtd/nand/pxa3xx_nand.c2
-rw-r--r--drivers/mtd/nand/r852.c10
-rw-r--r--drivers/mtd/nand/sh_flctl.c2
-rw-r--r--drivers/mtd/nand/sm_common.c2
-rw-r--r--drivers/mtd/nand/tmio_nand.c2
19 files changed, 32 insertions, 32 deletions
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index a92054e945e..edec457d361 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -239,7 +239,7 @@ config MTD_NAND_BCM_UMI
help
This enables the NAND flash controller on the BCM UMI block.
- No board specfic support is done by this driver, each board
+ No board specific support is done by this driver, each board
must advertise a platform_device for the driver to attach.
config MTD_NAND_BCM_UMI_HWCS
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index a067d090cb3..bc65bf71e1a 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -228,7 +228,7 @@ static int __devinit ams_delta_init(struct platform_device *pdev)
AMS_DELTA_LATCH2_NAND_NCE |
AMS_DELTA_LATCH2_NAND_NWP);
- /* Scan to find existance of the device */
+ /* Scan to find existence of the device */
if (nand_scan(ams_delta_mtd, 1)) {
err = -ENXIO;
goto out_mtd;
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
index 7c95da1f612..0911cf03db8 100644
--- a/drivers/mtd/nand/autcpu12.c
+++ b/drivers/mtd/nand/autcpu12.c
@@ -176,7 +176,7 @@ static int __init autcpu12_init(void)
*/
this->options = NAND_USE_FLASH_BBT;
- /* Scan to find existance of the device */
+ /* Scan to find existence of the device */
if (nand_scan(autcpu12_mtd, 1)) {
err = -ENXIO;
goto out_ior;
diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c
index 9f1b451005c..71c35a0b982 100644
--- a/drivers/mtd/nand/cs553x_nand.c
+++ b/drivers/mtd/nand/cs553x_nand.c
@@ -241,7 +241,7 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr)
/* Enable the following for a flash based bad block table */
this->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR;
- /* Scan to find existance of the device */
+ /* Scan to find existence of the device */
if (nand_scan(new_mtd, 1)) {
err = -ENXIO;
goto out_ior;
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 8c8d3c86c0e..4633f094c51 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -724,7 +724,7 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
}
/* This helper function setups the registers for ECC and whether or not
- * the spare area will be transfered. */
+ * the spare area will be transferred. */
static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
bool transfer_spare)
{
@@ -965,7 +965,7 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
if (ECC_ERROR_CORRECTABLE(err_correction_info)) {
/* If err_byte is larger than ECC_SECTOR_SIZE,
- * means error happend in OOB, so we ignore
+ * means error happened in OOB, so we ignore
* it. It's no need for us to correct it
* err_device is represented the NAND error
* bits are happened in if there are more
@@ -1109,7 +1109,7 @@ static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
}
/* This is the callback that the NAND core calls to write a page without ECC.
- * raw access is similiar to ECC page writes, so all the work is done in the
+ * raw access is similar to ECC page writes, so all the work is done in the
* write_page() function above.
*/
static void denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index b7f8de7b278..96c0b34ba8d 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -137,7 +137,7 @@ static struct rs_control *rs_decoder;
*
* Fabrice Bellard figured this out in the old docecc code. I added
* some comments, improved a minor bit and converted it to make use
- * of the generic Reed-Solomon libary. tglx
+ * of the generic Reed-Solomon library. tglx
*/
static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc)
{
@@ -400,7 +400,7 @@ static uint16_t __init doc200x_ident_chip(struct mtd_info *mtd, int nr)
doc200x_hwcontrol(mtd, 0, NAND_CTRL_ALE | NAND_CTRL_CHANGE);
doc200x_hwcontrol(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
- /* We cant' use dev_ready here, but at least we wait for the
+ /* We can't' use dev_ready here, but at least we wait for the
* command to complete
*/
udelay(50);
@@ -986,7 +986,7 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat,
dummy = ReadDOC(docptr, ECCConf);
}
- /* Error occured ? */
+ /* Error occurred ? */
if (dummy & 0x80) {
for (i = 0; i < 6; i++) {
if (DoC_is_MillenniumPlus(doc))
@@ -1160,7 +1160,7 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio
/* NOTE: The lines below modify internal variables of the NAND and MTD
layers; variables with have already been configured by nand_scan.
Unfortunately, we didn't know before this point what these values
- should be. Thus, this code is somewhat dependant on the exact
+ should be. Thus, this code is somewhat dependent on the exact
implementation of the NAND layer. */
if (mh->UnitSizeFactor != 0xff) {
this->bbt_erase_shift += (0xff - mh->UnitSizeFactor);
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 7a13d42cbab..537e380b8dc 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -59,7 +59,7 @@ struct fsl_elbc_mtd {
unsigned int fmr; /* FCM Flash Mode Register value */
};
-/* Freescale eLBC FCM controller infomation */
+/* Freescale eLBC FCM controller information */
struct fsl_elbc_fcm_ctrl {
struct nand_hw_control controller;
diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
index 205b10b9f9b..0d45ef3883e 100644
--- a/drivers/mtd/nand/fsmc_nand.c
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -335,7 +335,7 @@ static void fsmc_enable_hwecc(struct mtd_info *mtd, int mode)
/*
* fsmc_read_hwecc_ecc4 - Hardware ECC calculator for ecc4 option supported by
- * FSMC. ECC is 13 bytes for 512 bytes of data (supports error correction upto
+ * FSMC. ECC is 13 bytes for 512 bytes of data (supports error correction up to
* max of 8-bits)
*/
static int fsmc_read_hwecc_ecc4(struct mtd_info *mtd, const uint8_t *data,
@@ -381,7 +381,7 @@ static int fsmc_read_hwecc_ecc4(struct mtd_info *mtd, const uint8_t *data,
/*
* fsmc_read_hwecc_ecc1 - Hardware ECC calculator for ecc1 option supported by
- * FSMC. ECC is 3 bytes for 512 bytes of data (supports error correction upto
+ * FSMC. ECC is 3 bytes for 512 bytes of data (supports error correction up to
* max of 1-bit)
*/
static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data,
@@ -408,10 +408,10 @@ static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data,
* @buf: buffer to store read data
* @page: page number to read
*
- * This routine is needed for fsmc verison 8 as reading from NAND chip has to be
+ * This routine is needed for fsmc version 8 as reading from NAND chip has to be
* performed in a strict sequence as follows:
* data(512 byte) -> ecc(13 byte)
- * After this read, fsmc hardware generates and reports error data bits(upto a
+ * After this read, fsmc hardware generates and reports error data bits(up to a
* max of 8 bits)
*/
static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
@@ -686,7 +686,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
}
/*
- * Scan to find existance of the device
+ * Scan to find existence of the device
*/
if (nand_scan_ident(&host->mtd, 1, NULL)) {
ret = -ENXIO;
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 85cfc061d41..c54a4cbac6b 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -1582,7 +1582,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
}
/**
- * nand_read - [MTD Interface] MTD compability function for nand_do_read_ecc
+ * nand_read - [MTD Interface] MTD compatibility function for nand_do_read_ecc
* @mtd: MTD device structure
* @from: offset to read from
* @len: number of bytes to read
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index a1e8b30078d..af46428286f 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -945,7 +945,7 @@ static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc
rd2 = NULL;
/* Per chip or per device ? */
chipsel = (td->options & NAND_BBT_PERCHIP) ? i : -1;
- /* Mirrored table avilable ? */
+ /* Mirrored table available ? */
if (md) {
if (td->pages[i] == -1 && md->pages[i] == -1) {
writeops = 0x03;
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 213181be0d9..893d95bfea4 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -162,7 +162,7 @@ MODULE_PARM_DESC(bitflips, "Maximum number of random bit flips per page (z
MODULE_PARM_DESC(gravepages, "Pages that lose data [: maximum reads (defaults to 3)]"
" separated by commas e.g. 1401:2 means page 1401"
" can be read only twice before failing");
-MODULE_PARM_DESC(rptwear, "Number of erases inbetween reporting wear, if not zero");
+MODULE_PARM_DESC(rptwear, "Number of erases between reporting wear, if not zero");
MODULE_PARM_DESC(overridesize, "Specifies the NAND Flash size overriding the ID bytes. "
"The size is specified in erase blocks and as the exponent of a power of two"
" e.g. 5 means a size of 32 erase blocks");
diff --git a/drivers/mtd/nand/nomadik_nand.c b/drivers/mtd/nand/nomadik_nand.c
index 8c0b6937522..a045a4a581b 100644
--- a/drivers/mtd/nand/nomadik_nand.c
+++ b/drivers/mtd/nand/nomadik_nand.c
@@ -151,7 +151,7 @@ static int nomadik_nand_probe(struct platform_device *pdev)
nand->options = pdata->options;
/*
- * Scan to find existance of the device
+ * Scan to find existence of the device
*/
if (nand_scan(&host->mtd, 1)) {
ret = -ENXIO;
diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c
index 59efa829ef2..20bfe5f15af 100644
--- a/drivers/mtd/nand/pasemi_nand.c
+++ b/drivers/mtd/nand/pasemi_nand.c
@@ -157,7 +157,7 @@ static int __devinit pasemi_nand_probe(struct platform_device *ofdev)
/* Enable the following for a flash based bad block table */
chip->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR;
- /* Scan to find existance of the device */
+ /* Scan to find existence of the device */
if (nand_scan(pasemi_nand_mtd, 1)) {
err = -ENXIO;
goto out_lpc;
diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c
index 317aff428e4..caf5a736340 100644
--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
@@ -95,7 +95,7 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
goto out;
}
- /* Scan to find existance of the device */
+ /* Scan to find existence of the device */
if (nand_scan(&data->mtd, pdata->chip.nr_chips)) {
err = -ENXIO;
goto out;
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index ab7f4c33ced..ff0701276d6 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -184,7 +184,7 @@ struct pxa3xx_nand_info {
static int use_dma = 1;
module_param(use_dma, bool, 0444);
-MODULE_PARM_DESC(use_dma, "enable DMA for data transfering to/from NAND HW");
+MODULE_PARM_DESC(use_dma, "enable DMA for data transferring to/from NAND HW");
/*
* Default NAND flash controller configuration setup by the
diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c
index 6322d1fb5d6..cae2e013c98 100644
--- a/drivers/mtd/nand/r852.c
+++ b/drivers/mtd/nand/r852.c
@@ -185,7 +185,7 @@ static void r852_do_dma(struct r852_device *dev, uint8_t *buf, int do_read)
dbg_verbose("doing dma %s ", do_read ? "read" : "write");
- /* Set intial dma state: for reading first fill on board buffer,
+ /* Set initial dma state: for reading first fill on board buffer,
from device, for writes first fill the buffer from memory*/
dev->dma_state = do_read ? DMA_INTERNAL : DMA_MEMORY;
@@ -766,7 +766,7 @@ static irqreturn_t r852_irq(int irq, void *data)
ret = IRQ_HANDLED;
dev->card_detected = !!(card_status & R852_CARD_IRQ_INSERT);
- /* we shouldn't recieve any interrupts if we wait for card
+ /* we shouldn't receive any interrupts if we wait for card
to settle */
WARN_ON(dev->card_unstable);
@@ -794,13 +794,13 @@ static irqreturn_t r852_irq(int irq, void *data)
ret = IRQ_HANDLED;
if (dma_status & R852_DMA_IRQ_ERROR) {
- dbg("recieved dma error IRQ");
+ dbg("received dma error IRQ");
r852_dma_done(dev, -EIO);
complete(&dev->dma_done);
goto out;
}
- /* recieved DMA interrupt out of nowhere? */
+ /* received DMA interrupt out of nowhere? */
WARN_ON_ONCE(dev->dma_stage == 0);
if (dev->dma_stage == 0)
@@ -960,7 +960,7 @@ int r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
&dev->card_detect_work, 0);
- printk(KERN_NOTICE DRV_NAME ": driver loaded succesfully\n");
+ printk(KERN_NOTICE DRV_NAME ": driver loaded successfully\n");
return 0;
error10:
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index 546c2f0eb2e..81bbb5ee148 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -78,7 +78,7 @@ static void start_translation(struct sh_flctl *flctl)
static void timeout_error(struct sh_flctl *flctl, const char *str)
{
- dev_err(&flctl->pdev->dev, "Timeout occured in %s\n", str);
+ dev_err(&flctl->pdev->dev, "Timeout occurred in %s\n", str);
}
static void wait_completion(struct sh_flctl *flctl)
diff --git a/drivers/mtd/nand/sm_common.c b/drivers/mtd/nand/sm_common.c
index 4a8f367c295..57cc80cd01a 100644
--- a/drivers/mtd/nand/sm_common.c
+++ b/drivers/mtd/nand/sm_common.c
@@ -121,7 +121,7 @@ int sm_register_device(struct mtd_info *mtd, int smartmedia)
if (ret)
return ret;
- /* Bad block marker postion */
+ /* Bad block marker position */
chip->badblockpos = 0x05;
chip->badblockbits = 7;
chip->block_markbad = sm_block_markbad;
diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c
index 38fb16771f8..14c57870782 100644
--- a/drivers/mtd/nand/tmio_nand.c
+++ b/drivers/mtd/nand/tmio_nand.c
@@ -4,7 +4,7 @@
* Slightly murky pre-git history of the driver:
*
* Copyright (c) Ian Molton 2004, 2005, 2008
- * Original work, independant of sharps code. Included hardware ECC support.
+ * Original work, independent of sharps code. Included hardware ECC support.
* Hard ECC did not work for writes in the early revisions.
* Copyright (c) Dirk Opfer 2005.
* Modifications developed from sharps code but