aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media/video/gspca
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/video/gspca')
-rw-r--r--drivers/media/video/gspca/gl860/gl860-mi1320.c2
-rw-r--r--drivers/media/video/gspca/gspca.c4
-rw-r--r--drivers/media/video/gspca/mars.c2
-rw-r--r--drivers/media/video/gspca/mr97310a.c2
-rw-r--r--drivers/media/video/gspca/ov519.c4
-rw-r--r--drivers/media/video/gspca/sonixb.c2
-rw-r--r--drivers/media/video/gspca/spca500.c4
-rw-r--r--drivers/media/video/gspca/spca508.c2
-rw-r--r--drivers/media/video/gspca/sq905.c2
-rw-r--r--drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c2
10 files changed, 13 insertions, 13 deletions
diff --git a/drivers/media/video/gspca/gl860/gl860-mi1320.c b/drivers/media/video/gspca/gl860/gl860-mi1320.c
index c276a7debde..b57160e0486 100644
--- a/drivers/media/video/gspca/gl860/gl860-mi1320.c
+++ b/drivers/media/video/gspca/gl860/gl860-mi1320.c
@@ -201,7 +201,7 @@ void mi1320_init_settings(struct gspca_dev *gspca_dev)
sd->vmax.backlight = 2;
sd->vmax.brightness = 8;
sd->vmax.sharpness = 7;
- sd->vmax.contrast = 0; /* 10 but not working with tihs driver */
+ sd->vmax.contrast = 0; /* 10 but not working with this driver */
sd->vmax.gamma = 40;
sd->vmax.hue = 5 + 1;
sd->vmax.saturation = 8;
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 9c6a643caf0..e526aa3deda 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -857,7 +857,7 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev)
}
/* the bandwidth is not wide enough
- * negociate or try a lower alternate setting */
+ * negotiate or try a lower alternate setting */
PDEBUG(D_ERR|D_STREAM,
"bandwidth not wide enough - trying again");
msleep(20); /* wait for kill complete */
@@ -2346,7 +2346,7 @@ void gspca_disconnect(struct usb_interface *intf)
usb_set_intfdata(intf, NULL);
/* release the device */
- /* (this will call gspca_release() immediatly or on last close) */
+ /* (this will call gspca_release() immediately or on last close) */
video_unregister_device(&gspca_dev->vdev);
/* PDEBUG(D_PROBE, "disconnect complete"); */
diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c
index cb4d0bf0d78..0196209a948 100644
--- a/drivers/media/video/gspca/mars.c
+++ b/drivers/media/video/gspca/mars.c
@@ -361,7 +361,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
mi_w(gspca_dev, i + 1, mi_data[i]);
data[0] = 0x00;
- data[1] = 0x4d; /* ISOC transfering enable... */
+ data[1] = 0x4d; /* ISOC transferring enable... */
reg_w(gspca_dev, 2);
gspca_dev->ctrl_inac = 0; /* activate the illuminator controls */
diff --git a/drivers/media/video/gspca/mr97310a.c b/drivers/media/video/gspca/mr97310a.c
index 3884c9d300c..97e50796743 100644
--- a/drivers/media/video/gspca/mr97310a.c
+++ b/drivers/media/video/gspca/mr97310a.c
@@ -469,7 +469,7 @@ static void lcd_stop(struct gspca_dev *gspca_dev)
static int isoc_enable(struct gspca_dev *gspca_dev)
{
gspca_dev->usb_buf[0] = 0x00;
- gspca_dev->usb_buf[1] = 0x4d; /* ISOC transfering enable... */
+ gspca_dev->usb_buf[1] = 0x4d; /* ISOC transferring enable... */
return mr_write(gspca_dev, 2);
}
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index fd1b6082c96..36a46fc7873 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -381,7 +381,7 @@ static const struct v4l2_pix_format ov519_sif_mode[] = {
larger then necessary, however they need to be this big as the ov511 /
ov518 always fills the entire isoc frame, using 0 padding bytes when
it doesn't have any data. So with low framerates the amount of data
- transfered can become quite large (libv4l will remove all the 0 padding
+ transferred can become quite large (libv4l will remove all the 0 padding
in userspace). */
static const struct v4l2_pix_format ov518_vga_mode[] = {
{320, 240, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
@@ -4368,7 +4368,7 @@ static void ov511_pkt_scan(struct gspca_dev *gspca_dev,
gspca_dev->last_packet_type = DISCARD_PACKET;
return;
}
- /* Add 11 byte footer to frame, might be usefull */
+ /* Add 11 byte footer to frame, might be useful */
gspca_frame_add(gspca_dev, LAST_PACKET, in, 11);
return;
} else {
diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index 5a08738fba3..146b459b08d 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -827,7 +827,7 @@ static void setexposure(struct gspca_dev *gspca_dev)
possible to use less exposure then what the fps maximum
allows by setting register 10. register 10 configures the
actual exposure as quotient of the full exposure, with 0
- being no exposure at all (not very usefull) and reg10_max
+ being no exposure at all (not very useful) and reg10_max
being max exposure possible at that framerate.
The code maps our 0 - 510 ms exposure ctrl to these 2
diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c
index 45552c3ff8d..3e76951e3c1 100644
--- a/drivers/media/video/gspca/spca500.c
+++ b/drivers/media/video/gspca/spca500.c
@@ -607,7 +607,7 @@ static void spca500_reinit(struct gspca_dev *gspca_dev)
reg_w(gspca_dev, 0x00, 0x8880, 2);
/* family cam Quicksmart stuff */
reg_w(gspca_dev, 0x00, 0x800a, 0x00);
- /* Set agc transfer: synced inbetween frames */
+ /* Set agc transfer: synced between frames */
reg_w(gspca_dev, 0x00, 0x820f, 0x01);
/* Init SDRAM - needed for SDRAM access */
reg_w(gspca_dev, 0x00, 0x870a, 0x04);
@@ -831,7 +831,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
/* familycam Quicksmart pocketDV stuff */
reg_w(gspca_dev, 0x00, 0x800a, 0x00);
- /* Set agc transfer: synced inbetween frames */
+ /* Set agc transfer: synced between frames */
reg_w(gspca_dev, 0x00, 0x820f, 0x01);
/* Init SDRAM - needed for SDRAM access */
reg_w(gspca_dev, 0x00, 0x870a, 0x04);
diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/video/gspca/spca508.c
index 34831937152..41dce49fb43 100644
--- a/drivers/media/video/gspca/spca508.c
+++ b/drivers/media/video/gspca/spca508.c
@@ -592,7 +592,7 @@ static const u16 spca508_sightcam_init_data[][2] = {
/* This line seems to setup the frame/canvas */
{0x000f, 0x8402},
-/* Theese 6 lines are needed to startup the webcam */
+/* These 6 lines are needed to startup the webcam */
{0x0090, 0x8110},
{0x0001, 0x8114},
{0x0001, 0x8114},
diff --git a/drivers/media/video/gspca/sq905.c b/drivers/media/video/gspca/sq905.c
index 2e9c0617519..5ba96aff225 100644
--- a/drivers/media/video/gspca/sq905.c
+++ b/drivers/media/video/gspca/sq905.c
@@ -22,7 +22,7 @@
* History and Acknowledgments
*
* The original Linux driver for SQ905 based cameras was written by
- * Marcell Lengyel and furter developed by many other contributers
+ * Marcell Lengyel and furter developed by many other contributors
* and is available from http://sourceforge.net/projects/sqcam/
*
* This driver takes advantage of the reverse engineering work done for
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
index 17531b41a07..b8156855f2b 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
@@ -569,7 +569,7 @@ static int hdcs_init(struct sd *sd)
if (err < 0)
return err;
- /* Enable continous frame capture, bit 2: stop when frame complete */
+ /* Enable continuous frame capture, bit 2: stop when frame complete */
err = stv06xx_write_sensor(sd, HDCS_REG_CONFIG(sd), BIT(3));
if (err < 0)
return err;