aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/qib
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/infiniband/hw/qib')
-rw-r--r--drivers/infiniband/hw/qib/qib.h2
-rw-r--r--drivers/infiniband/hw/qib/qib_file_ops.c4
-rw-r--r--drivers/infiniband/hw/qib/qib_iba6120.c4
-rw-r--r--drivers/infiniband/hw/qib/qib_iba7220.c6
-rw-r--r--drivers/infiniband/hw/qib/qib_iba7322.c8
-rw-r--r--drivers/infiniband/hw/qib/qib_init.c2
-rw-r--r--drivers/infiniband/hw/qib/qib_mad.h2
-rw-r--r--drivers/infiniband/hw/qib/qib_twsi.c2
-rw-r--r--drivers/infiniband/hw/qib/qib_ud.c4
-rw-r--r--drivers/infiniband/hw/qib/qib_user_sdma.c2
10 files changed, 18 insertions, 18 deletions
diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
index 73225eee3cc..769a1d9da4b 100644
--- a/drivers/infiniband/hw/qib/qib.h
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -653,7 +653,7 @@ struct diag_observer_list_elt;
/* device data struct now contains only "general per-device" info.
* fields related to a physical IB port are in a qib_pportdata struct,
- * described above) while fields only used by a particualr chip-type are in
+ * described above) while fields only used by a particular chip-type are in
* a qib_chipdata struct, whose contents are opaque to this file.
*/
struct qib_devdata {
diff --git a/drivers/infiniband/hw/qib/qib_file_ops.c b/drivers/infiniband/hw/qib/qib_file_ops.c
index 75bfad16c11..406fca50d03 100644
--- a/drivers/infiniband/hw/qib/qib_file_ops.c
+++ b/drivers/infiniband/hw/qib/qib_file_ops.c
@@ -1539,7 +1539,7 @@ done_chk_sdma:
/*
* If process has NOT already set it's affinity, select and
- * reserve a processor for it, as a rendevous for all
+ * reserve a processor for it, as a rendezvous for all
* users of the driver. If they don't actually later
* set affinity to this cpu, or set it to some other cpu,
* it just means that sooner or later we don't recommend
@@ -1657,7 +1657,7 @@ static int qib_do_user_init(struct file *fp,
* 0 to 1. So for those chips, we turn it off and then back on.
* This will (very briefly) affect any other open ctxts, but the
* duration is very short, and therefore isn't an issue. We
- * explictly set the in-memory tail copy to 0 beforehand, so we
+ * explicitly set the in-memory tail copy to 0 beforehand, so we
* don't have to wait to be sure the DMA update has happened
* (chip resets head/tail to 0 on transition to enable).
*/
diff --git a/drivers/infiniband/hw/qib/qib_iba6120.c b/drivers/infiniband/hw/qib/qib_iba6120.c
index 774dea897e9..7de4b7ebffc 100644
--- a/drivers/infiniband/hw/qib/qib_iba6120.c
+++ b/drivers/infiniband/hw/qib/qib_iba6120.c
@@ -1799,7 +1799,7 @@ static int qib_6120_setup_reset(struct qib_devdata *dd)
/*
* Keep chip from being accessed until we are ready. Use
* writeq() directly, to allow the write even though QIB_PRESENT
- * isnt' set.
+ * isn't' set.
*/
dd->flags &= ~(QIB_INITTED | QIB_PRESENT);
dd->int_counter = 0; /* so we check interrupts work again */
@@ -2171,7 +2171,7 @@ static void rcvctrl_6120_mod(struct qib_pportdata *ppd, unsigned int op,
* Init the context registers also; if we were
* disabled, tail and head should both be zero
* already from the enable, but since we don't
- * know, we have to do it explictly.
+ * know, we have to do it explicitly.
*/
val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt);
qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt);
diff --git a/drivers/infiniband/hw/qib/qib_iba7220.c b/drivers/infiniband/hw/qib/qib_iba7220.c
index de799f17cb9..74fe0360bec 100644
--- a/drivers/infiniband/hw/qib/qib_iba7220.c
+++ b/drivers/infiniband/hw/qib/qib_iba7220.c
@@ -2111,7 +2111,7 @@ static int qib_setup_7220_reset(struct qib_devdata *dd)
/*
* Keep chip from being accessed until we are ready. Use
* writeq() directly, to allow the write even though QIB_PRESENT
- * isnt' set.
+ * isn't' set.
*/
dd->flags &= ~(QIB_INITTED | QIB_PRESENT);
dd->int_counter = 0; /* so we check interrupts work again */
@@ -2479,7 +2479,7 @@ static int qib_7220_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val)
* we command the link down. As with width, only write the
* actual register if the link is currently down, otherwise
* takes effect on next link change. Since setting is being
- * explictly requested (via MAD or sysfs), clear autoneg
+ * explicitly requested (via MAD or sysfs), clear autoneg
* failure status if speed autoneg is enabled.
*/
ppd->link_speed_enabled = val;
@@ -2778,7 +2778,7 @@ static void rcvctrl_7220_mod(struct qib_pportdata *ppd, unsigned int op,
* Init the context registers also; if we were
* disabled, tail and head should both be zero
* already from the enable, but since we don't
- * know, we have to do it explictly.
+ * know, we have to do it explicitly.
*/
val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt);
qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt);
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c
index 4a2d21e15a7..55de3cf3441 100644
--- a/drivers/infiniband/hw/qib/qib_iba7322.c
+++ b/drivers/infiniband/hw/qib/qib_iba7322.c
@@ -3299,7 +3299,7 @@ static int qib_do_7322_reset(struct qib_devdata *dd)
/*
* Keep chip from being accessed until we are ready. Use
* writeq() directly, to allow the write even though QIB_PRESENT
- * isnt' set.
+ * isn't' set.
*/
dd->flags &= ~(QIB_INITTED | QIB_PRESENT | QIB_BADINTR);
dd->flags |= QIB_DOING_RESET;
@@ -3727,7 +3727,7 @@ static int qib_7322_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val)
/*
* As with width, only write the actual register if the
* link is currently down, otherwise takes effect on next
- * link change. Since setting is being explictly requested
+ * link change. Since setting is being explicitly requested
* (via MAD or sysfs), clear autoneg failure status if speed
* autoneg is enabled.
*/
@@ -4163,7 +4163,7 @@ static void rcvctrl_7322_mod(struct qib_pportdata *ppd, unsigned int op,
* Init the context registers also; if we were
* disabled, tail and head should both be zero
* already from the enable, but since we don't
- * know, we have to do it explictly.
+ * know, we have to do it explicitly.
*/
val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt);
qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt);
@@ -7483,7 +7483,7 @@ static int serdes_7322_init_new(struct qib_pportdata *ppd)
/* Baseline Wander Correction Gain [13:4-0] (leave as default) */
/* Baseline Wander Correction Gain [3:7-5] (leave as default) */
/* Data Rate Select [5:7-6] (leave as default) */
- /* RX Parralel Word Width [3:10-8] (leave as default) */
+ /* RX Parallel Word Width [3:10-8] (leave as default) */
/* RX REST */
/* Single- or Multi-channel reset */
diff --git a/drivers/infiniband/hw/qib/qib_init.c b/drivers/infiniband/hw/qib/qib_init.c
index ffefb78b894..a01f3fce8eb 100644
--- a/drivers/infiniband/hw/qib/qib_init.c
+++ b/drivers/infiniband/hw/qib/qib_init.c
@@ -346,7 +346,7 @@ done:
* @dd: the qlogic_ib device
*
* sanity check at least some of the values after reset, and
- * ensure no receive or transmit (explictly, in case reset
+ * ensure no receive or transmit (explicitly, in case reset
* failed
*/
static int init_after_reset(struct qib_devdata *dd)
diff --git a/drivers/infiniband/hw/qib/qib_mad.h b/drivers/infiniband/hw/qib/qib_mad.h
index 147aff9117d..7840ab593bc 100644
--- a/drivers/infiniband/hw/qib/qib_mad.h
+++ b/drivers/infiniband/hw/qib/qib_mad.h
@@ -73,7 +73,7 @@ struct ib_mad_notice_attr {
struct {
__be16 reserved;
- __be16 lid; /* LID where change occured */
+ __be16 lid; /* LID where change occurred */
u8 reserved2;
u8 local_changes; /* low bit - local changes */
__be32 new_cap_mask; /* new capability mask */
diff --git a/drivers/infiniband/hw/qib/qib_twsi.c b/drivers/infiniband/hw/qib/qib_twsi.c
index 6f31ca5039d..ddde72e11ed 100644
--- a/drivers/infiniband/hw/qib/qib_twsi.c
+++ b/drivers/infiniband/hw/qib/qib_twsi.c
@@ -41,7 +41,7 @@
* QLogic_IB "Two Wire Serial Interface" driver.
* Originally written for a not-quite-i2c serial eeprom, which is
* still used on some supported boards. Later boards have added a
- * variety of other uses, most board-specific, so teh bit-boffing
+ * variety of other uses, most board-specific, so the bit-boffing
* part has been split off to this file, while the other parts
* have been moved to chip-specific files.
*
diff --git a/drivers/infiniband/hw/qib/qib_ud.c b/drivers/infiniband/hw/qib/qib_ud.c
index 4a51fd1e9cb..828609fa4d2 100644
--- a/drivers/infiniband/hw/qib/qib_ud.c
+++ b/drivers/infiniband/hw/qib/qib_ud.c
@@ -116,7 +116,7 @@ static void qib_ud_loopback(struct qib_qp *sqp, struct qib_swqe *swqe)
}
/*
- * A GRH is expected to preceed the data even if not
+ * A GRH is expected to precede the data even if not
* present on the wire.
*/
length = swqe->length;
@@ -520,7 +520,7 @@ void qib_ud_rcv(struct qib_ibport *ibp, struct qib_ib_header *hdr,
goto drop;
/*
- * A GRH is expected to preceed the data even if not
+ * A GRH is expected to precede the data even if not
* present on the wire.
*/
wc.byte_len = tlen + sizeof(struct ib_grh);
diff --git a/drivers/infiniband/hw/qib/qib_user_sdma.c b/drivers/infiniband/hw/qib/qib_user_sdma.c
index 66208bcd7c1..82442085cbe 100644
--- a/drivers/infiniband/hw/qib/qib_user_sdma.c
+++ b/drivers/infiniband/hw/qib/qib_user_sdma.c
@@ -239,7 +239,7 @@ static int qib_user_sdma_num_pages(const struct iovec *iov)
}
/*
- * Truncate length to page boundry.
+ * Truncate length to page boundary.
*/
static int qib_user_sdma_page_length(unsigned long addr, unsigned long len)
{