aboutsummaryrefslogtreecommitdiffstats
path: root/arch/blackfin/mach-bf561
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-bf561')
-rw-r--r--arch/blackfin/mach-bf561/boards/acvilon.c11
-rw-r--r--arch/blackfin/mach-bf561/boards/cm_bf561.c13
-rw-r--r--arch/blackfin/mach-bf561/boards/ezkit.c108
-rw-r--r--arch/blackfin/mach-bf561/boards/tepla.c7
-rw-r--r--arch/blackfin/mach-bf561/include/mach/pll.h4
-rw-r--r--arch/blackfin/mach-bf561/smp.c5
6 files changed, 133 insertions, 15 deletions
diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c
index 972e1347c6b..f6ffd6f054c 100644
--- a/arch/blackfin/mach-bf561/boards/acvilon.c
+++ b/arch/blackfin/mach-bf561/boards/acvilon.c
@@ -203,8 +203,13 @@ static struct resource bfin_uart0_resources[] = {
.flags = IORESOURCE_MEM,
},
{
+ .start = IRQ_UART_TX,
+ .end = IRQ_UART_TX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
.start = IRQ_UART_RX,
- .end = IRQ_UART_RX + 1,
+ .end = IRQ_UART_RX,
.flags = IORESOURCE_IRQ,
},
{
@@ -367,7 +372,7 @@ static struct bfin5xx_spi_chip data_flash_chip_info = {
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@@ -470,7 +475,7 @@ static struct platform_device bfin_dpmc = {
static struct platform_device *acvilon_devices[] __initdata = {
&bfin_dpmc,
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bfin_spi0_device,
#endif
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index c1b72f2d635..d81450f635d 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -29,7 +29,7 @@
*/
const char bfin_board_name[] = "Bluetechnix CM BF561";
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
@@ -277,8 +277,13 @@ static struct resource bfin_uart0_resources[] = {
.flags = IORESOURCE_MEM,
},
{
+ .start = IRQ_UART_TX,
+ .end = IRQ_UART_TX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
.start = IRQ_UART_RX,
- .end = IRQ_UART_RX+1,
+ .end = IRQ_UART_RX,
.flags = IORESOURCE_IRQ,
},
{
@@ -483,7 +488,7 @@ static struct platform_device *cm_bf561_devices[] __initdata = {
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bfin_spi0_device,
#endif
@@ -518,7 +523,7 @@ static int __init cm_bf561_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf561_devices, ARRAY_SIZE(cm_bf561_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 9490dc800ca..838978808a1 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -172,8 +172,13 @@ static struct resource bfin_uart0_resources[] = {
.flags = IORESOURCE_MEM,
},
{
+ .start = IRQ_UART_TX,
+ .end = IRQ_UART_TX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
.start = IRQ_UART_RX,
- .end = IRQ_UART_RX+1,
+ .end = IRQ_UART_RX,
.flags = IORESOURCE_IRQ,
},
{
@@ -286,7 +291,7 @@ static struct platform_device ezkit_flash_device = {
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@@ -378,7 +383,7 @@ static struct i2c_gpio_platform_data i2c_gpio_data = {
.scl_pin = GPIO_PF0,
.sda_is_open_drain = 0,
.scl_is_open_drain = 0,
- .udelay = 40,
+ .udelay = 10,
};
static struct platform_device i2c_gpio_device = {
@@ -417,6 +422,96 @@ static struct platform_device bfin_dpmc = {
},
};
+#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
+ || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#include <linux/videodev2.h>
+#include <media/blackfin/bfin_capture.h>
+#include <media/blackfin/ppi.h>
+
+static const unsigned short ppi_req[] = {
+ P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
+ P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
+ P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+ 0,
+};
+
+static const struct ppi_info ppi_info = {
+ .type = PPI_TYPE_PPI,
+ .dma_ch = CH_PPI0,
+ .irq_err = IRQ_PPI1_ERROR,
+ .base = (void __iomem *)PPI0_CONTROL,
+ .pin_req = ppi_req,
+};
+
+#if defined(CONFIG_VIDEO_ADV7183) \
+ || defined(CONFIG_VIDEO_ADV7183_MODULE)
+#include <media/adv7183.h>
+static struct v4l2_input adv7183_inputs[] = {
+ {
+ .index = 0,
+ .name = "Composite",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = V4L2_STD_ALL,
+ },
+ {
+ .index = 1,
+ .name = "S-Video",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = V4L2_STD_ALL,
+ },
+ {
+ .index = 2,
+ .name = "Component",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = V4L2_STD_ALL,
+ },
+};
+
+static struct bcap_route adv7183_routes[] = {
+ {
+ .input = ADV7183_COMPOSITE4,
+ .output = ADV7183_8BIT_OUT,
+ },
+ {
+ .input = ADV7183_SVIDEO0,
+ .output = ADV7183_8BIT_OUT,
+ },
+ {
+ .input = ADV7183_COMPONENT0,
+ .output = ADV7183_8BIT_OUT,
+ },
+};
+
+
+static const unsigned adv7183_gpio[] = {
+ GPIO_PF13, /* reset pin */
+ GPIO_PF2, /* output enable pin */
+};
+
+static struct bfin_capture_config bfin_capture_data = {
+ .card_name = "BF561",
+ .inputs = adv7183_inputs,
+ .num_inputs = ARRAY_SIZE(adv7183_inputs),
+ .routes = adv7183_routes,
+ .i2c_adapter_id = 0,
+ .board_info = {
+ .type = "adv7183",
+ .addr = 0x20,
+ .platform_data = (void *)adv7183_gpio,
+ },
+ .ppi_info = &ppi_info,
+ .ppi_control = (PACK_EN | DLEN_8 | DMA32 | FLD_SEL),
+};
+#endif
+
+static struct platform_device bfin_capture_device = {
+ .name = "bfin_capture",
+ .dev = {
+ .platform_data = &bfin_capture_data,
+ },
+};
+#endif
+
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
static struct platform_device bfin_i2s = {
.name = "bfin-i2s",
@@ -457,7 +552,7 @@ static struct platform_device *ezkit_devices[] __initdata = {
&bfin_isp1760_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bfin_spi0_device,
#endif
@@ -489,6 +584,11 @@ static struct platform_device *ezkit_devices[] __initdata = {
&ezkit_flash_device,
#endif
+#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
+ || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+ &bfin_capture_device,
+#endif
+
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
&bfin_i2s,
#endif
diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c
index bb056e60f6e..1a57bc986aa 100644
--- a/arch/blackfin/mach-bf561/boards/tepla.c
+++ b/arch/blackfin/mach-bf561/boards/tepla.c
@@ -51,8 +51,13 @@ static struct resource bfin_uart0_resources[] = {
.flags = IORESOURCE_MEM,
},
{
+ .start = IRQ_UART_TX,
+ .end = IRQ_UART_TX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
.start = IRQ_UART_RX,
- .end = IRQ_UART_RX+1,
+ .end = IRQ_UART_RX,
.flags = IORESOURCE_IRQ,
},
{
diff --git a/arch/blackfin/mach-bf561/include/mach/pll.h b/arch/blackfin/mach-bf561/include/mach/pll.h
index 7977db2f1c1..00bdacee9cc 100644
--- a/arch/blackfin/mach-bf561/include/mach/pll.h
+++ b/arch/blackfin/mach-bf561/include/mach/pll.h
@@ -16,6 +16,7 @@
#include <mach/irq.h>
#define SUPPLE_0_WAKEUP ((IRQ_SUPPLE_0 - (IRQ_CORETMR + 1)) % 32)
+#define SUPPLE_1_WAKEUP ((IRQ_SUPPLE_1 - (IRQ_CORETMR + 1)) % 32)
static inline void
bfin_iwr_restore(unsigned long iwr0, unsigned long iwr1, unsigned long iwr2)
@@ -42,7 +43,8 @@ bfin_iwr_save(unsigned long niwr0, unsigned long niwr1, unsigned long niwr2,
static inline void
bfin_iwr_set_sup0(unsigned long *iwr0, unsigned long *iwr1, unsigned long *iwr2)
{
- bfin_iwr_save(0, IWR_ENABLE(SUPPLE_0_WAKEUP), 0, iwr0, iwr1, iwr2);
+ bfin_iwr_save(0, IWR_ENABLE(SUPPLE_0_WAKEUP) |
+ IWR_ENABLE(SUPPLE_1_WAKEUP), 0, iwr0, iwr1, iwr2);
}
#endif
diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c
index db22401e760..ab1c617b9cf 100644
--- a/arch/blackfin/mach-bf561/smp.c
+++ b/arch/blackfin/mach-bf561/smp.c
@@ -84,7 +84,7 @@ int __cpuinit platform_boot_secondary(unsigned int cpu, struct task_struct *idle
if ((bfin_read_SYSCR() & COREB_SRAM_INIT) == 0) {
/* CoreB already running, sending ipi to wakeup it */
- platform_send_ipi_cpu(cpu, IRQ_SUPPLE_0);
+ smp_send_reschedule(cpu);
} else {
/* Kick CoreB, which should start execution from CORE_SRAM_BASE. */
bfin_write_SYSCR(bfin_read_SYSCR() & ~COREB_SRAM_INIT);
@@ -114,7 +114,8 @@ void __init platform_request_ipi(int irq, void *handler)
int ret;
const char *name = (irq == IRQ_SUPPLE_0) ? supple0 : supple1;
- ret = request_irq(irq, handler, IRQF_PERCPU, name, handler);
+ ret = request_irq(irq, handler, IRQF_PERCPU | IRQF_NO_SUSPEND |
+ IRQF_FORCE_RESUME, name, handler);
if (ret)
panic("Cannot request %s for IPI service", name);
}